Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

X028 B-593 Replace Electrical Transformer

Forecast

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Naval Information Warfare Systems Command, specifically Niwc Pacific, has issued a forecast for contract X028 B-593 regarding the replacement of an electrical transformer. This project is categorized under NAICS code 238220 and is scheduled for performance in San Diego. Johannes Cardenas serves as the primary Contracting Officer for this requirement, with Crystal Irvin acting as the secondary point of contact. The forecast was posted on August 10, 2026, to notify potential contractors of the upcoming electrical infrastructure needs.

General Info

NIWC Pacific seeks a contractor to replace an electrical transformer in San Diego.

Agency

Naval Information Warfare Systems → Niwc Pacific

NAICS

238220 - Plumbing, Heating, and Air-Conditioning Contractors

Place of Performance

San Diego, CA, USA

Set-Aside

NONE

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseForecast

PostedAug 23

forecast

Prepare for this forecast

Research the agency, track this forecast, and prepare your capture plan before the solicitation opens.

Organization & Contact Information

Show more

AgencyNaval Information Warfare Systems → Niwc Pacific

Contacts2 people available

OfficeN/A

Organization / AgencyNaval Information Warfare Systems → Niwc Pacific

Office AddressN/A

Contacts

Johannes CardenasContracting Officer

contact@example.gov

Crystal IrvinSecondary Point of Contact

contact@example.gov

Full Description

Show more

Replace Electrical Transformer

Similar Contracts

Same NAICS industry code

Install Pier D High Pressure Air System, NSBREM-724-A

Solicitation # N4425527RB003

Solicitation N4425527RB003 is a design-build project for the installation of a permanent high pressure air (HPA) system at Pier D, B724A of Naval Base Kitsap in Bremerton, Washington. The scope of work includes the design, construction, and commissioning of the system, specifically incorporating existing HPA cross connections into a system supplied by compressors at the south end of Pier D. The project requires the installation of HPA shore risers at five specific locations: East bollards 11, 59, and 101, and West bollards 47 and 59. All new piping must be installed under service grates with valves located topside, adhering to MIL-STD101C color coding and UFC 4-150-02 standards. This is a 100% set-aside for 8(a) businesses located within SBA Region X, with an estimated construction magnitude between 1 million and 5 million dollars. The contract is a firm-fixed-price task order under a Multiple Award Construction Contract (MACC), with a period of performance of 538 calendar days from award. Award will be based on price and MACC past performance. The contractor is responsible for providing a Designer of Record to ensure compliance with professional engineering standards and Unified Facilities Criteria. Key requirements include strict adherence to EM 385-1-1 safety standards, DBIDS installation access security protocols, and the submission of a bid guarantee of 20% of the bid price or 3 million dollars, whichever is less.

Bristol Alliance of Companies

POSTED

about 1 hour ago

DEADLINE

Water Pump Replacement

Solicitation # water-pump-replacement

The Cassadaga Job Corps Center in New York is soliciting bids for a water pump replacement project at their Pump House. The scope of work involves removing existing end suction centrifugal pumps and check valves to install a new booster pump system featuring two pumps with variable speed drives and automatic tower fill valves. The project also requires the installation of a hydro pneumatic expansion tank, 3 inch Type L copper piping with sweat fittings, and fiberglass insulation on all piping, concluding with final testing and factory startup. This solicitation is set aside for small businesses, including certified Veteran Owned, Service-Disabled Veteran Owned, Women-Owned, and HUBZone small businesses. Interested parties must submit their responses by November 30, 2026. The project falls under NAICS code 238220, and inquiries can be directed to the primary point of contact, Derrick Dickerson.

Cassadaga Job Corps Center

POSTED

about 1 hour ago

DEADLINE

CBP#9772 HVAC Air Handling Unit (AHU) and Ductwork Cleaning Services

Solicitation # CBP#9772

Management & Training Corporation (MTC) is soliciting bids for a fixed-price, single lump sum subcontract to provide HVAC Air Handling Unit (AHU) and ductwork cleaning services at the Edison Job Corps Center in Edison, New Jersey. The scope of work involves the thorough cleaning of twelve AHUs and twenty-eight coils across the Kilmer and Edison dormitories, including all associated supply, return, and outside-air ductwork and air distribution components. The contractor is responsible for pre-cleaning inspections with photographic documentation, the installation of durable gasketed access panels at all AHUs and a minimum of twelve hallway ceiling locations, and the restoration of any affected ceiling surfaces. The estimated contract value ranges from $100,000 to $250,000, with a performance period of 90 consecutive business days following a written Notice to Proceed. This opportunity is set aside for small businesses, including VOSB, SDVOSB, WOSB, and HUBZone certifications. Bidders must complete a physical site visit and sign an attendance roster to be considered. Proposals must include a detailed cost breakout and acknowledge compliance with Davis-Bacon prevailing wage rates for Middlesex County. For bids equal to or exceeding $25,000, a bid bond of 20% of the base bid is required, and the awarded contractor must provide performance and payment bonds from a surety with at least an A- rating. Evaluation is based on overall best value, and the contractor must adhere to various FAR clauses regarding small business utilization, security requirements, and the Buy American Act. Final acceptance is contingent upon a center inspection and the submission of a comprehensive final project report.

Edison Job Corps

POSTED

about 1 hour ago

DEADLINE

CBP7787 ED1 RM 123 HVAC Compressor Replacement

Solicitation # CBP7787 ED1 RM 123

Management & Training Corporation (MTC) is soliciting bids for a fixed-price, single lump sum subcontract to replace a failed HVAC/refrigeration compressor at the ED1 Building of the Sierra Nevada Job Corps Center in Reno, Nevada. The project scope encompasses four primary phases: preparation and environmental safety, including refrigerant recovery per EPA Section 608 regulations; demolition and removal of the failed unit; installation of an OEM-specified compressor with new filter-driers and heaters; and final system testing and commissioning. The estimated price range for this effort is between 0 and 25,000 dollars, with bids due by November 17, 2026. Award will be based on overall best value, and a physical site visit is mandatory prior to bid submission. For bids equal to or exceeding 25,000 dollars, a bid bond of 20 percent of the base bid is required, and the awarded contractor must provide performance and payment bonds from a surety with at least an A- rating. Contractors must maintain general liability insurance of at least 1,000,000 dollars and worker's compensation with employer's liability limits of 500,000 dollars. Compliance with Washoe County wage determinations and the submission of SF 1413 and a Unique Entity ID (UEI) are required. Final payment is contingent upon a successful substantial completion inspection, a final punch list walkthrough, and the submission of a final Certified Payroll Report.

Sierra Nevada Job Corps Center

POSTED

about 1 hour ago

DEADLINE

MJCC Multiple HVAC Replacement System

Solicitation # mjcc-multiple-hvac-replacement-system

Education & Training Resources is seeking quotes for a turnkey subcontracting project to replace multiple HVAC systems at the Montgomery Job Corps Center in Montgomery, Alabama. The scope of work involves the removal of existing equipment and the installation, testing, and commissioning of eight new units across Buildings A, B, E, F, and G, with capacities ranging from 3.5 to 10 tons. Technical specifications require Energy Star systems, minimum EER ratings of 16 for certain units, 90 percent efficiency furnaces, and the use of R-454B refrigerant. All work must comply with the National Electrical Code, NFPA Standard No. 101 Life Safety Code, and OSHA regulations. The project requires a 5 to 10 year warranty on parts and a 2 year warranty on workmanship, with final payment contingent upon a signed punch list and applicable warranty submission. This is a small business set-aside opportunity open to VOSB, SDVOSB, WOSB, and HUBZone certified entities. Interested bidders must provide a current SAM.gov UEI number, active registration, Alabama business licenses, a W-9, and a FFATA form. Submission requirements include a completed bid sheet with a detailed cost breakdown, certificates of insurance, a proposed performance schedule, and an anti-lobbying certification. The Davis-Bacon Act applies, necessitating prevailing wages and certified payroll records. Bonding requirements are tiered based on project value, requiring a 100 percent payment bond for projects over 35,000 dollars and both performance and payment bonds for projects exceeding 150,000 dollars. Bids are due by November 27, 2026, at 12:00 PM CST.

Montgomery Job Corps Center

POSTED

about 1 hour ago

DEADLINE

Joliet Job Corps-Request for Quote HVAC Replacement Female Dormitory

Solicitation # joliet-job-corps-request-quote-hvac-replacement-female-dormitory

Management and Training Corporation is seeking bids for a fixed-price, single lump sum subcontract to replace the HVAC system at the Joliet Job Corps Center female dormitory in Illinois. The project scope includes the removal and disposal of ten existing furnace and air conditioning systems and the installation of ten new Carrier systems. Additionally, the contractor must install and integrate a Pelican Building Automation System across eleven units, including one existing unit. The estimated value of the contract ranges from $250,000 to $500,000. Bids must be submitted to Frances McGraw by November 23, 2026. To be considered, bidders are required to conduct a physical site visit and submit a bid bond equal to 20 percent of the base bid for projects $25,000 or greater. Award decisions will be based on overall best value. Required submission documents include the MTC Bid for Lump Sum Contract form, a detailed cost breakout on company letterhead, the MTC Supplier Self-Certification and Set-Up packet, and proof of insurance including general liability and worker's compensation. The contract is subject to the Davis-Bacon Act, requiring compliance with specific Illinois prevailing wage rates and the submission of certified payroll reports. Performance and payment bonds from a surety company with at least an A- rating are required for awards of $25,000 or more. Final acceptance is contingent upon the completion of a punch list, delivery of two sets of operation and maintenance manuals, and the provision of manufacturer and installer warranties. The project is open to various small business set-asides, including VOSB, SDVOSB, WOSB, and HUBZone certified businesses.

Joliet Job Corps

POSTED

about 1 hour ago

DEADLINE

ACT-0124-00 BNATCS: Installation of two (2) existing Chillers Bldg. 366 at the Willima J. Hughes Technical Center, Atlantic City, NJ

Solicitation # act-0124-00-bnatcs-installation-two-2-existing-chillers-bldg-366-willima-j-hughes-technical-center

This contract involves the installation of two existing chillers at Building 366 of the William J. Hughes Technical Center in Atlantic City, New Jersey. The scope of work encompasses the installation of electrical power, control interface connections, and chilled water piping, as well as the final start-up of the equipment. The estimated magnitude of construction for this project is between 250,000 and 500,000 dollars. Managed by PTSI Managed Services Inc., this solicitation is set aside for various small business categories, including Veteran Owned, Service-Disabled Veteran Owned, Women-Owned, and HUBZone small businesses. The primary NAICS code associated with the project is 238220. Interested parties must submit their responses by the deadline of November 18, 2026.

PTSI Managed Services Inc.

POSTED

about 1 hour ago

DEADLINE

Centennial Dry Sprinkler System & Compressor Replacement Services

Solicitation # centennial-dry-sprinkler-system-compressor-replacement-services

Management & Training Corporation (MTC) is soliciting bids for a fixed-price, single lump sum subcontract to provide dry-type sprinkler system and compressor replacement services at the Centennial Job Corps Center in Nampa, Idaho. The project scope involves the demolition and removal of existing failing air compressors and distribution piping networks in the Men's Dormitory (Building CM), Women's Dormitory (Building CW), and Recreation Building (Building D). The contractor must supply and install a new, code-approved piping network and properly sized air compressor in accordance with NFPA 25 (2023 Edition) standards. All work must be completed within 30 consecutive business days following a written Notice to Proceed. Bids are due by December 1, 2026, and will be awarded based on overall best value. Mandatory requirements for submission include a physical site visit, a detailed cost breakout, proof of insurance, and three comparable references. For bids equal to or greater than $25,000, a bid bond guarantee of 20% of the base bid is required, and the awarded contractor must provide performance and payment bonds from an A-rated surety. The contract is set aside for HUBZone, Woman-owned, and Service-Disabled Veteran-owned small businesses. Compliance with prevailing wage rates per the Davis-Bacon Act and various FAR clauses regarding business size certification, debarment disclosure for subcontracts over $45,000, and FFATA reporting for contracts over $40,000 is required.

Management & Training Corporation/Centennial Job Corps Center

POSTED

about 1 hour ago

DEADLINE

Dorm Hot Water Tank Replacement – Glenmont Job Corps Center – S26-006

Solicitation # S26-006

Adams and Associates, Inc. is seeking qualified mechanical and plumbing contractors for solicitation S26-006 to replace domestic hot water storage tanks and associated equipment at the Glenmont Job Corps Center in Glenmont, New York. This subcontracting opportunity involves the removal and disposal of four 505-gallon tanks and the installation of four new 500-gallon insulated storage tanks and four heat exchangers, distributed equally between the North and South Dormitories. Additionally, the contractor must install one new bronze Bell and Gossett circulator pump in the North Dormitory. The comprehensive scope of work includes all necessary piping modifications using ProPress materials, electrical disconnections and reconnections, insulation matching existing standards, rigging, and the provision of temporary hot water arrangements to ensure the facility remains operational. The project is estimated to take between two and a half to three weeks to complete. Proposals are due by November 9, 2026, and will be evaluated based on price (60 percent), quality (20 percent), past performance (10 percent), and schedule (10 percent). Awardees must comply with New York State statutory insurance requirements and Davis-Bacon Act prevailing wage rates for plumbers, electricians, insulators, and laborers. Required submission documents include a completed vendor questionnaire with UEI and NAICS codes, a current W-9, and relevant New York State licenses. Final acceptance of the work is contingent upon system testing and the submission of manufacturer and workmanship warranties, with payment terms set at Net 30 days.

Adams and Associates, Inc.

POSTED

about 1 hour ago

DEADLINE

Replacement of 2 oil pumps

Solicitation # replacement-2-oil-pumps

Adams and Associates DBA Delaware Valley Job Corps is soliciting bids for the replacement of two Marathon Model No TVL 56c17F5322J oil pumps located in the boiler room. The project is located in New York and falls under NAICS code 238220. This opportunity is set aside for small businesses, including certified Veteran Owned, Service-Disabled Veteran Owned, Women-Owned, and HUBZone small businesses. Interested parties must submit their responses by November 13, 2026. The primary point of contact for this solicitation is Gabriela Cenusa.

Adams and Associates DBA Delaware Vally Job Corps

POSTED

about 1 hour ago

DEADLINE

Inland Empire Job Corps-Request for Quote HVAC Replacement Cafeteria & OA CTS

Solicitation # inland-empire-job-corps-request-quote-hvac-replacement-cafeteria-oa-cts

Management & Training Corporation (MTC), acting as the operator for the U.S. Department of Labor, is soliciting bids for a fixed-price, single lump sum subcontract to replace packaged HVAC units with gas heating at the Inland Empire Job Corps Center in San Bernardino, California. The project focuses on the Cafeteria and OA/CTS areas and includes the installation of energy-efficient units at ground-level or rooftop locations, as well as the EPA-compliant recovery of refrigerants and disposal of old equipment. The estimated contract value ranges from $25,000 to $100,000, with bids due by November 23, 2026. Award decisions will be based on overall best value, with mandatory requirements including a physical site visit, a 20% bid bond for bids of $25,000 or more, and a surety company rating of at least A-. The selected contractor must comply with Construction Wage Rate Requirements, paying prevailing wages per General Decision CA20260026, and adhere to OSHA safety standards and RCRA hazardous waste regulations. Required submissions include a detailed cost breakout on company letterhead, the MTC Bid for Lump Sum Contract form, and a completed supplier self-certification packet. Payment will be processed via AIA documents, subject to a 10% retainage until substantial completion.

Inland Empire Job Corps

POSTED

about 1 hour ago

DEADLINE

CBP7792 Cafeteria Hot Water Heater Replacement

Solicitation # CBP7792

Management & Training Corporation (MTC) is seeking bids for a fixed-price, single lump sum subcontract to replace a failing commercial natural gas-fired water heater at the Sierra Nevada Job Corps Center in Reno, Nevada. The project requires a licensed plumbing contractor to isolate, remove, and dispose of the existing unit and install a new commercial-grade 125-gallon natural gas-fired water heater with equivalent input and storage capacity. The estimated price range for this effort is between $25,000 and $100,000. Bids will be evaluated based on overall best value, considering price, quality, delivery schedule, and relevant experience. The selected contractor must comply with federal regulations, including the Davis-Bacon Act and specific wage determinations for Washoe County, Nevada. For bids equal to or greater than $25,000, a bid bond of 20% is required, along with performance and payment bonds from an A-rated surety company upon award. Required deliverables include two sets of operation and maintenance manuals, manufacturer and installer warranties, and a final certificate of release of liens. Bidders must submit a signed bid form and a detailed cost breakout on company letterhead by the deadline of November 25, 2026. Additional compliance requirements include providing a Unique Entity ID (UEI), submitting an SF 1413 Statement and Acknowledgement, and adhering to FAR clauses regarding the Buy American Act and the Combating Trafficking in Persons regulations.

Sierra Nevada Job Corps Center

POSTED

about 1 hour ago

DEADLINE

More opportunities from Naval Information Warfare Systems → Niwc Pacific

Same awarding agency

N66001-27-R-0061 - MARKET SURVEY FOR C4ISR AND ESS INTEGRATION FOR NAVY SHORE PLATFORMS

Solicitation # N6600127R0061

Electronic and Precision Equipment Repair and Maintenance

POSTED

about 20 hours ago

DEADLINE

N66001-27-R-0069: Notice of Intent to Award Sole Source to Seebyte, Inc.

Solicitation # N66001-27-R-0069

The Naval Information Warfare Center Pacific intends to award a sole source, cost-plus-fixed-fee contract to SeeByte, Inc. for the sustainment, enhancement, and integration of software capabilities supporting unmanned maritime systems. The scope of work encompasses a wide range of technical services, including software engineering, system integration, installation, configuration, and both developmental and operational testing. Additionally, the contractor will provide deployment assistance, corrective and adaptive maintenance, configuration management, technical documentation, and training for operators and maintainers to ensure the long-term reliability and interoperability of the software. Classified under NAICS code 541511 for Custom Computer Programming Services, the requirement has a business size standard of 34 million dollars. The anticipated award date is March 2027. While the government intends to negotiate directly with SeeByte, Inc., other interested firms may submit capability statements to demonstrate their ability to fulfill the requirements. All responding vendors must be registered in the System for Award Management with a valid UEID and CAGE code.

Custom Computer Programming Services

POSTED

DEADLINE

Specialized Equipment Labeling SupplierThis small business set-aside subcontract with NIWC Pacific involves the supply of custom identification labels and the execution of non-recurring engineering setup for prime contractors. The scope of work focuses on the production of silver industrial labels that strictly adhere to MIL-STD-130 marking requirements, specifically covering part numbers 06893210-195, 06893210-220, and 07117016-3. The contractor is responsible for delivering a total of 48 specified labels and completing all necessary NRE label setup. This project falls under NAICS code 323111 and is performed for the Department of Defense at a location in zip code 92110.

Commercial Printing (except Screen and Books)

POSTED

DEADLINE

Backup Controller and KVM Mounting Hardware SupplierThis subcontract opportunity with NIWC Pacific, under the Department of Defense, seeks a supplier for original brand-name mounting brackets and grounding straps to support prime contractors. The required deliverables include Backup Controller and KVM mounting kits, 16 grounding straps (Part No. 0521152), and 19 units of electronic components (Part No. 2W062/Q per DWG 7142612). All materials must be Outsource Electronics brand and TAA compliant, and the selected vendor must provide authorized distributor certification. The contract is designated as a Total Small Business Set Aside under NAICS code 332322. Performance will take place in zip code 92110. Interested parties must submit their responses by November 10, 2026, at 4:00 PM.

Sheet Metal Work Manufacturing

POSTED

DEADLINE

Outsource Electronics Cable Assembly SupplierThis small business set-aside subcontract involves the supply of six original, new, and TAA-compliant integrated cable assemblies for prime contractors supporting NIWC Pacific projects. The scope specifically requires the provision of Cable Assembly 2W060/Q and 2W061/Q in accordance with drawing 7142612, ensuring strict adherence to MIL-STD-130 for marking and MIL-STD-31000 for design drawings. Additional technical requirements include the application of specific harness identification tags and heat shrink tubing. To qualify, the supplier must provide certification as an authorized Outsource Electronics distributor. The contract falls under NAICS code 334418 and is managed under the Department of Defense. Performance will take place in the 92110 zip code area, with a response deadline set for November 10, 2026.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

DEADLINE

SMT Stencil ManufacturingThis subcontract for SMT Stencil Manufacturing supports Department of the Navy NIWC Pacific projects by providing Non-Recurring Engineering stencils for prime contractors. The scope of work involves the production of a single NRE stencil using either laser-cutting or electroforming techniques on stainless steel foils. These stencils are created based on specific PCB designs to ensure the precise application of solder paste while adhering to strict assembly tolerances. The opportunity is categorized under NAICS code 332710 and was posted on November 4, 2026, with a response deadline of November 19, 2026. The project is managed under the Department of Defense for the NIWC Pacific agency.

POSTED

DEADLINE

Electronic Component ProcurementThis subcontract involves the procurement of individual electronic components, such as resistors, capacitors, integrated circuits, and connectors, to support prime contractors on Department of the Navy NIWC Pacific projects. The scope of work requires the delivery of a complete bill of materials necessary for the production of 20 circuit card assemblies. To ensure quality and security, all parts must be military or industrial grade and sourced exclusively from authorized distributors in accordance with DFARS requirements to prevent the introduction of counterfeit components. The provider must maintain strict compliance with AS6081 and Mil-Spec standards throughout the procurement process.

Other Electronic Parts and Equipment Merchant Wholesalers

POSTED

DEADLINE

PCB Fabrication (Bare Board Supply)This subcontract involves the fabrication and supply of 20 bare printed circuit boards for prime contractors supporting Department of the Navy NIWC Pacific projects. The scope of work requires the use of high-precision equipment to perform etching, drilling, and plating on specialized substrates such as polyimide or FR-4, ensuring all deliverables strictly adhere to NIWC drawings and specifications. To maintain rigorous quality control, the provider must comply with AS9100, ISO 9001, or IPC-A-600 standards. This opportunity falls under NAICS code 334413 and is managed by the Department of Defense. Interested parties must respond by November 19, 2026.

Semiconductor and Related Device Manufacturing

POSTED

DEADLINE

The Government is seeking 100 PERCENT SMALL BUSINESS SET ASIDE BRAND NAME to acquire Six complete mounting kits

Solicitation # N6600127Q6021

The U.S. Navy, through NIWC Pacific, is seeking a Firm-Fixed-Price contract for the procurement of six complete mounting kits. This acquisition is a 100 percent small business set-aside with a strict brand name requirement and no substitutions allowed. Each kit must include backup controller and KVM mounting brackets, integrated cable assemblies, grounding straps, and identification labels. All products must be original, new, and Trade Agreements Act compliant. Delivery is expected within 30 days after receipt of order, with shipping handled as FOB Destination to San Diego, California. The award will be based on the lowest priced offer that meets all technical and brand name requirements, though technical capability and past performance are weighted as more important than price. Offerors must be registered in SAM with a valid CAGE code and Unique Entity ID, and must provide documentation confirming they are an authorized source. Technical specifications require strict adherence to MIL-STD-130 for marking and MIL-STD-31000 for design drawings, with specific requirements for harness identification tags and heat shrink tubing. Quotes must be submitted in PDF or Excel format via the PIEE solicitation module by November 10, 2026.

Computer Terminal and Other Computer Peripheral Equipment Manufacturing

POSTED

DEADLINE

Notice of Intent to Award a Sole Source Order to Concisys, LLC.

Solicitation # N66001-27-Q-6023

The Department of the Navy, Naval Information Warfare Center (NIWC) Pacific, intends to award a noncompetitive, firm-fixed-price purchase order to Concisys, LLC, located in San Diego, California. This procurement, identified by solicitation number N66001-27-Q-6023, is for the acquisition of 20 circuit card assemblies produced in accordance with NIWC drawings and specifications, as well as one NRE stencil. The award is being pursued under the authority of 41 U.S.C. 1901 and FAR 12.102, with FAR Part 12 applying as the procurement involves commercial products and services. The applicable NAICS code for this effort is 334418 for Printed Circuit Assembly Manufacturing, with a business size standard of 750 employees. While the government intends to negotiate solely with Concisys, LLC, all responsible sources may submit capability statements, comments, or questions via email to the designated point of contact by 1700 Pacific Time on November 18, 2026. All responding vendors must maintain active registration in the System for Award Management (SAM) with a valid Unique Entity ID and CAGE code.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

DEADLINE

BFTN RC3 Integration and Technical SupportThe BFTN RC3 Integration and Technical Support subcontract, issued by NIWC Pacific under the Department of Defense, focuses on providing specialized technical and training support for prime contractors. The scope of work involves the installation and integration of SDMs into BFTN RC3 equipment racks, including on-site rack integration and comprehensive system-level testing utilizing field test equipment. To ensure successful project completion, the contractor must deliver fully operational SDM systems and provide necessary training certificates. Execution of this contract requires strict adherence to Navy installation standards and the possession of appropriate security clearances for access to BFTN sites. The project is categorized under NAICS code 541330 and is centered in the 92064 zip code area. Interested parties must note the response deadline of November 19, 2026.

Engineering Services

POSTED

DEADLINE

SDM Software and Waveform EngineeringThe SDM Software and Waveform Engineering subcontract, issued by NIWC Pacific under the Department of Defense, focuses on the emergent development, production improvement, and validation of software and waveforms for prime contractors. The scope of work includes executing coding, updating software architecture, and optimizing signal processing algorithms through the use of waveform analysis tools and RF signal simulators. The selected provider must adhere to strict Navy software accreditation processes and secure coding standards to deliver validated software builds and comprehensive test reports. This opportunity falls under NAICS code 541511 and is centered in the 92064 zip code area, with a response deadline set for November 19, 2026.

Custom Computer Programming Services

POSTED

DEADLINE

Prepare for this forecast

Research this forecast and prepare for the solicitation

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS