Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

This Government Contract opportunity from Department Of Defense was posted on April 18, 2006. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

56--LoMo Removable Spillway Weir

Awarded
W912EF06R0007Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 237990
New
SLED
Pennsauken Community Pool Improvements
Solicitation # 2026-BID-15
The Township of Pennsauken, New Jersey, is soliciting bids for the Pennsauken Community Pool Improvements project, solicitation number 2026-BID-15. The scope of work involves the rehabilitation, construction, and general improvement of the community pool, including site clearing, reinforced concrete flooring and wall construction, sandblasting the pool interior, and the installation of shade structures and electrical conduits. All work must adhere to the 2019 NJDOT Standard Specifications for Road and Bridge Construction and comply with the Americans with Disabilities Act of 1990. The contract will be awarded to the lowest qualified responsible bidder. Bids must be submitted electronically via the OpenGov Procurement Portal. Per Addendum #01, the submission deadline is November 10, 2026, at 10:30 AM, and submissions must include a signed Acknowledgment of Receipt of Changes. Required documentation includes a bid bond of 10 percent not to exceed 20,000 dollars, a notarized Non-Collusion Affidavit, and a Public Works Contractor Registration Certificate. The contract period is one year, with a possible one-year extension. Awarded contractors must comply with the New Jersey Prevailing Wage Act, mandatory affirmative action language, and provide a two-year maintenance bond. Payment is processed through the Township's governing body meeting cycle, contingent upon the submission of certified payrolls and itemized invoices.
Procurement

POSTED

about 10 hours ago

DEADLINE

in 11 days
NAICS: 237990
New
SLED
Seaview Vehicular Beach Access Ramp Reconstruction Project
Solicitation # 26-B-128CW
The Seaview Vehicular Beach Access Ramp Reconstruction Project, solicitation number 26-B-128CW, is an invitation for bid issued by Volusia County, Florida, to restore beach access at Seaview Avenue in Daytona Beach following destruction by Hurricane Ian. The project scope includes the demolition of damaged infrastructure and the construction of a new reinforced and unreinforced concrete vehicular ramp, a pedestrian sidewalk, curbing, and a composite sheet pile bulkhead with a concrete cap. The estimated construction cost is 1,213,413.00 dollars, with bids due electronically by November 5, 2026. Award will be granted to the lowest responsive and responsible bidder based on price, verified references, and demonstrated experience with similar projects. The project is subject to strict regulatory and technical requirements, including a Florida Department of Environmental Protection coastal construction permit that mandates specific protections for turtle nesting and lighting restrictions. Contractors must comply with FDOT traffic control standards, OSHA safety regulations, and federal provisions including the Davis-Bacon Act and E-Verify. Required deliverables include a payment and performance bond, comprehensive insurance coverage, and an as-built survey. Contract administration involves a 30-day payment cycle for undisputed invoices and a specific sales tax exemption procedure for materials. The County maintains the right to inspect all finished work, providing the contractor 20 days to remedy any punch list items before final acceptance.
Coastal

POSTED

about 11 hours ago

DEADLINE

in 7 days

AI Contract Overview

Show more

This fixed price construction contract, managed by the US Army Engineer District Walla Walla, involves the construction of a removable spillway weir for the Lower Monumental Dam in Washington. The project requires the fabrication of a floating structural steel structure weighing approximately 2 million pounds, which will be transported via the Columbia and Snake rivers. Key technical requirements include high performance submersible coatings, underwater cast-in-place concrete, river bottom excavation, and diving operations at depths of 120 feet. The scope also encompasses the installation of air and water piping, spherical bearings, and air compressors to support operational testing. The procurement is open for full and open competition with an estimated value exceeding 10 million dollars and a projected completion date of November 30, 2007. Technical proposals are evaluated on a pass/fail basis, and bidders must be registered in the Central Contractor Registration database. Large businesses submitting proposals over 1 million dollars are required to provide a comprehensive subcontracting plan supporting various small business categories. The project falls under NAICS code 237990 and follows standards established by similar previous projects at Lower Granite and Ice Harbor dams.

General Info

Contract Value

$16,795,224

NAICS

237990 - Other Heavy and Civil Engineering Construction

Place of Performance

WA, USA

Set-Aside

NONE

Award Issued Date

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

4 updates
PhaseAwarded
Posted

Presolicitation

Notice updated

Response deadline changed from Feb 9, 2006 to Mar 13, 2006. The notice title changed. The notice description changed.

Notice updated

The notice title changed. NAICS code changed from 237990 to 332312. The notice description changed.

Notice updated

The notice title changed. NAICS code changed from 332312 to 237990. The notice description changed.

Notice updated

The notice title changed. The notice description changed.

Awarded

Contract was awarded

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → US Army Engineer District Walla Wal
ContactsNo contacts available
OfficeWALLA WALLA, WA, 99362-1876, USA
Office AddressWALLA WALLA, WA, 99362-1876, USA
ContactsNo contact information available

Full Description

Show more
CONCTACT INFO: Contract Specialist is Robert Joshlin, contact@example.gov. Solicitation documents, plans, and specifications will be available at https://fedteds.gov. There will not be paper copies or CDs available. Issue date for th e solicitation will be on or about 9 January 2006. Proposal due date will be on or about 9 February 2006. PROCUREMENT INFO: THIS PROCUREMENT UNRESTRICTED AVAILABLE FOR FULL AND OPEN COMPETITION IAW FAR 19.10 Small Business Competitive Demonstration Program. This Request for Proposal will be a Fixed Price Construction requirement. The magnitude of this requir ement is estimated to be more than $10,000,000. The estimated project completion date is 30 November 2007. The standards for the technical evaluations are on a go no-go or minimum required basis. These will be pass/fail evaluation factors will be identifi ed in the forthcoming solicitation. A technical proposal must either satisfy all of the evaluation factors or be ineligible for further consideration. DESCRIPTION OF WORK: This requirement is to construct a removable spillway weir (RSW) for Lower Monumental Dam at Walla Walla and Franklin Counties, WA. The RSW is a floating structural steel fabrication which will be attached to the dam at spillway bay 8 . In operation, the RSW can be filled with water as ballast and submerged to allow the spillway to operate to its full capacity. The work will include, structural steel fabrication  approximately 2 million lbs, services of Naval Architect and Marine Sur veyor for RSW transport, high performance submersible coatings on all steel, underwater cast-in-place concrete placement -150 cubic yards, excavation of the river bottom and placement of --- cubic yards of rock, underwater diving to depths of 120 feet to s upport installation activities, surveying of the spillway, piers, and river bottom adjacent to the spillway bay 8, water and air piping, valves, and appurtenances, two 13 bore, self-lubricating spherical bearings, and three air compressors: 2-450 cfm, 1- 100 cfm. The RSW is approximately 100 feet tall when installed (100 feet long while transported), 70 feet wide. Anticipated transport to the site is by the Columbia and Snake rivers. Attachment elements and motion controls will be installed at the Lower Monumental forebay dam face concurrent with fabrication and delivery of the main structure. Work at the dam face includes general construction, underwater diving and floating plant support. River bottom work upstream of the spillway will include surveyi ng, inspection and potential debris removal. Contractor furnished mechanical and electrical systems will be required to provide air and water delivery for operational testing of the RSW. Two similar projects previously constructed within the Walla Walla D istrict include RSW Lower Granite Dam, DACW68-00-C-0060 and RSW Ice Harbor Lock and Dam, W912EF-04-C-0020. These projects can be viewed at http://www.nww.usace.army.mil/rsw/ ADMIN INFO: In order for contractors to conduct business with the Department of Defense, the contractor must be registered in the Central Contractor Registration (CCR) database and must provide registration information with their proposal. Contractors ca n access the CCR for free at http://www.ccr.gov. The North American Industry Classification System (NAICS) code is 237990. If you are a large business and your bid or proposal will exceed $1 million, you will be required to submit a subcontracting plan with goals for small business (SB), historically underutilized business zone (HUBZone), small disadvantaged business (SDB), wo man-owned small business (WOSB), veteran-owned small business (VOSB), and service disabled veteran-owned small business (SDVOSB) concerns. For the purposes of this procurement, a concern is considered a small business if its annual average gross revenue, taken for the last 3 fiscal years, does not exceed $28.5 million. For contracting opportunities, visit th e Federal Business Opportunities (FedBizOpps) site, www.fbo.gov. This synopsis is not a request for proposal, but a notice that solicitation will be issued on or about 9 January 2006.

More opportunities from Department Of Defense → US Army Engineer District Walla Wal

Same awarding agency

NAICS: 332812
New
Federal
Dworshak Skeleton Bay Draft Tube Bulkhead Rehabilitation
Solicitation # W912EF27QA0020001
The US Army Corps of Engineers, Walla Walla District, is soliciting offers for the rehabilitation of twelve draft tube bulkheads and associated seal keeper bars at the Dworshak Dam. This small business set-aside project requires the contractor to provide all personnel, materials, equipment, and transportation to move the bulkheads from Dworshak Dam to a repair facility and back. The scope of work includes existing coating removal, weld inspection and repair according to AWS D1./D1.M standards, and the application of new coatings in compliance with SSPC SP 5/NACE No. 1 and Section 09 97 02.00 28 for hydraulic structures. The government provides the bulkheads as government furnished property, with each unit having an estimated value of 850,000 dollars. The project is structured in three phases, with each phase involving two top and two bottom bulkheads. Performance is scheduled between November 23, 2026, and July 5, 2027, with specific pickup and return windows for each phase. Deliveries and retrievals must be coordinated 15 days in advance and occur Monday through Thursday. Key requirements include a one-year warranty on the coating system, the submission of general inspection reports within five business days of each inspection, and the provision of manufacturer safety data sheets and CERL Lab certification for all paint materials. The contractor must also ensure all paint is stored and packaged according to strict safety and stability guidelines to prevent degradation.
Metal Coating, Engraving (except Jewelry and Silverware), and Allied Services to Manufacturers

POSTED

3 days ago

DEADLINE

in about 13 hours
View Details
NAICS: 811310
Federal
LLA Fish Pump - Motor Rewind
Solicitation # W912EF27QA006
Solicitation W912EF27QA006 is a combined synopsis and request for quotation issued by the US Army Engineer District Walla Walla for motor rewind and asbestos abatement services at the Lower Granite Dam in Pomeroy, Washington. The scope of work involves the rewinding, refurbishing, and addition of eight resistance temperature detectors to three polyphase AC squirrel cage induction motors used for fish pumps. This includes one Hitachi dual winding motor and two Ideal Electric single-winding motors. To ensure operational continuity, the project will be executed by rewinding one motor per year, with a total performance period extending through December 2029. The contract is a firm-fixed-price acquisition and is not set aside for small business concerns, although evaluation preferences are provided for HUBZone small businesses. Key technical requirements include the use of a minimum class F motor insulation system and strict adherence to core loss and hot spot specifications. Deliverables include the refurbished motors, final operation and maintenance manuals, and on-site commissioning support. The government has established a seven-business-day window for the acceptance or rejection of services following delivery. Liquidated damages are specified for delays, with daily rates increasing annually from FY28 through FY30. Offerors must comply with various federal regulations, including the Buy American and Balance of Payments Program, E-Verify personnel screening, and DFARS cybersecurity reporting standards.
Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

8 days ago

DEADLINE

in 24 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS