This Government Contract opportunity from Department Of Defense was posted on August 13, 2013. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Z--Pump No. 3 Rehabilitation and Restoration of Stop Gates, Fox Point Hurricane Barrier, Providence, RI

Awarded

W912WJ-13-B-0007Federal

Submission Closed08/12/2013, 12:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 238290

New

ACT-1033-01 NAS Perimeter Door Replacement Bldg. 300 at the William J. Hughes Technical Center, Atlantic City, NJ

Solicitation # act-1033-01-nas-perimeter-door-replacement-bldg-300-william-j-hughes-technical-center-atlantic-city

This contract, solicitation number act-1033-01-nas-perimeter-door-replacement-bldg-300-william-j-hughes-technical-center-atlantic-city, involves the provision and installation of two sets of interior commercial door assemblies at the NAS laboratory facility, Building 300, located within the WJ Hughes Technical Center at Atlantic City International Airport in New Jersey. The scope of work extends beyond installation to include necessary modifications, reframing, and finishing of the existing metal stud gypsum wall board door openings. The estimated magnitude of construction for this project is between 250,000 and 500,000 dollars. This opportunity is set aside for small businesses, including certified Veteran Owned, Service-Disabled Veteran Owned, Women-Owned, and HUBZone small businesses. Managed by PTSI Managed Services Inc., the solicitation was posted on October 29, 2026, with a response deadline of November 18, 2026.

PTSI Managed Services Inc.

POSTED

DEADLINE

Centennial JCC Panic Hardware Services (Electrical Room Egress Doors)

Solicitation # Panic Hardware (Electrical Room Egress Doors)

Management & Training Corporation is soliciting bids for a fee-for-service subcontract to provide panic hardware installation services for electrical room egress doors at the Centennial Job Corps Center in Nampa, Idaho. The project requires the contractor to bypass internal lock mechanisms and install Grade I commercial-grade panic bars, exterior trim, rim cylinders, strikes, and door closers at five specific locations: the Cafeteria, Men's Dorm, Women's Dorm, Recreation, and Vocational buildings. All installations must ensure doors open in the direction of exit travel under simple pressure and must comply with NEC 2023 Article 110.26(C)(3), NFPA 101 Life Safety Code, and the Americans with Disabilities Act. Performance verification requires a minimum of 10 consecutive cycle tests to ensure fail-safe operation. Eligible bidders must be licensed in the State of Idaho and provide a lump sum price for the project. This is a small business set-aside opportunity open to various SBA certifications, including VOSB, SDVOSB, WOSB, and HUBZone. Required submission documents include a bid sheet, a completed supplier packet with a W-9 and self-certification form, and three references, all due by December 1, 2026. The contract is subject to federal regulations, including the Davis-Bacon Act for prevailing wages, FAR clauses regarding the combating of trafficking in persons, and strict security requirements for protecting sensitive government information. Final award will be based on the best value as determined by MTC.

Management & Training Corporation/Centennial Job Corps Center

POSTED

DEADLINE

Controls Integration & AutomationThe Controls Integration and Automation subcontract involves the integration of new CRAC system controls into facility monitoring systems for prime contractors working on California Military Department projects. The primary objective is to configure system controls that guarantee continuous cooling for mission-critical communications systems, ensuring seamless integration with existing IT environmental monitoring or building management systems. The final deliverable is a fully integrated and tested control system. This project is located in San Luis Obispo and falls under NAICS code 238290. Interested parties should note that the solicitation was posted on October 29, 2026, with a response deadline of December 7, 2026.

California Military Department

POSTED

DEADLINE

Snow Plow and Salt Spreader UpfittingThis subcontract involves the supply and installation of winter maintenance equipment for prime contractors working on Massachusetts Operational Services Division vehicle projects. The scope of work focuses on delivering integrated snow removal systems, specifically the installation of Fisher XLS Stainless Steel plows ranging from 8'6" to 11' with Minute Mount 77111, as well as Fisher 2.5 cubic yard Polycaster salt spreaders equipped with vibrator kits and prewet systems. All installations must adhere to 540 CMR standards. The project is managed by the state of Massachusetts under the Operational Services Division and will be performed at the Lyman Street location in Westborough, Massachusetts. Interested parties must note the response deadline of November 9, 2026, for this specialized upfitting contract categorized under NAICS code 238290.

Operational Services Division

POSTED

DEADLINE

Kitchen Elevator Upgrade and Repair Service - NHSP-M

Solicitation # RFP NHDOC 2027-07

The New Hampshire Department of Corrections is soliciting proposals under RFP NHDOC 2027-07 for equipment upgrades and repair services for a passenger elevator located at the NH State Prison for Men in Concord. This firm fixed price or not-to-exceed contract requires the selected vendor to provide licensed professionals to perform technical upgrades and safety tests, with final results submitted to the NH Department of Labor. Due to the correctional environment, all vendor staff must undergo criminal background checks, adhere to strict tool inventory inspections, and comply with NHDOC administrative rules and the Prison Rape Elimination Act. Proposals are due by November 13, 2026, and will be evaluated based on a combined score of technical capabilities and cost, with the technical proposal weighted at 50 points. Key evaluation factors include organizational experience, capability, and approach. Awarded contractors must maintain comprehensive insurance, including at least 1 million dollars per occurrence in general liability, and provide monthly itemized invoices for payment within 30 days of approval. The contract includes provisions for termination by the state with 15 days notice and requires vendors to maintain a ready supply of necessary parts to prevent service delays.

Department Of Corrections

POSTED

DEADLINE

Window Installation & SupplyThis subcontract opportunity, managed by DAS Procurement for the State of Connecticut, involves the supply and installation of replacement windows for prime contractors working on City of Norwich rehabilitation projects. The scope of work includes the removal of existing units and the installation of builders-grade windows, with a specific requirement for all-wood construction windows that match the original form and fashion for properties located within local or national historic districts. Qualified bidders must hold a valid Connecticut Home Improvement Contractor license to be eligible for the contract. Interested parties must submit their responses by November 13, 2026, as specified in the solicitation posted on October 29, 2026.

POSTED

DEADLINE

Utility Duct Bank & TrenchingThis subcontract opportunity involves the construction of concrete-encased duct banks and utility pathways for prime contractors on USACE projects located at Dyess AFB. The scope of work includes the installation of two-way and four-way concrete-encased duct banks, as well as heavy-duty communications manholes and handholes, utilizing trenching and backfilling methods. All work must be performed in accordance with UFC 1-200-01 general building requirements to deliver a fully completed underground duct bank system and manhole network. Managed by the Department of Defense under the W076 Endist Ft Worth agency, the project falls under NAICS code 238290. The solicitation was posted on October 29, 2026, with a response deadline set for November 12, 2026.

POSTED

DEADLINE

Motorized Roll-Up Door Installation and Removal

256-NETWORK Contract Office 16 (36C256)

POSTED

DEADLINE

Vertical Transportation Equipment (VTE) Maintenance, Repair, & Inspection Services

Solicitation # FA446027Q0005

Solicitation FA446027Q0005 is a non-personal services contract for the comprehensive management, maintenance, repair, and inspection of real property vertical transportation equipment (VTE) at Little Rock Air Force Base, Arkansas. The scope of work covers freight and passenger elevators, escalators, and potentially wheelchair lifts, dock levelers, and dumbwaiters. The contractor is required to maintain a VTE availability rate of 95 percent and adhere to strict response times, including in-person arrival for emergency calls within two hours and commencement of routine work within 24 hours. All services must comply with ASME A17.1, ANSI/ASME A17.2, and other applicable safety and fire protection standards. A written Maintenance Control Program must be delivered within 30 calendar days of the award. This is a total small business set-aside under NAICS code 238290. The government will award the contract to the responsible offeror based on a lowest-price technically acceptable sequence, where the lowest-priced offer is selected if they possess an acceptable past performance rating, defined as at least two years of similar experience within the last four years. Proposals are due by November 18, 2026, and must be submitted via email to the designated points of contact. Payment and invoicing will be processed through Wide Area WorkFlow (WAWF) by the 10th of each month. Access to the base requires a valid REAL ID, and a single site visit is scheduled for October 26, 2026, requiring an RSVP by October 22, 2026.

POSTED

DEADLINE

UIL Generator Replacement

Solicitation # 1305M327Q0009

Department Of Commerce Noaa

POSTED

DEADLINE

N099--JLM Roll Up Door Replacement

Solicitation # 36C25627Q0092

Solicitation 36C25627Q0092 is a combined synopsis and request for quote issued by the Department of Veterans Affairs for the replacement of a motorized roll-up door at the John L. McClellan Veterans Hospital. This is a 100% set-aside for certified Service-Disabled Veteran-Owned Small Businesses (SDVOSB) under NAICS code 238290. The project requires the contractor to provide all labor, tools, and equipment, including a scissor lift and forklift, to remove and dispose of the existing door and install one grey 7 by 9 foot motorized rolling steel rapid slat door with insulated slats and an obstruction safety device. The award will be a firm-fixed-price contract with a performance period of 30 days from the Notice to Proceed and includes a one-year warranty. The government will utilize the Lowest Price Technically Acceptable (LPTA) evaluation process, focusing on technical capability, price reasonableness, and the completion of the VA Notice of Limitations on Subcontracting. Interested offerors must submit a three-volume quote package consisting of technical capabilities, a completed price schedule, and the required VAAR certification. Quotes must be emailed to Joseph Warren by 3:00 PM CST on November 18, 2026. A site visit is scheduled for November 6, 2026, at 10:00 AM, and all inquiries must be submitted by November 10, 2026. Performance will take place at the Central Arkansas Veterans Healthcare System in North Little Rock, Arkansas, and contractors must comply with all OSHA, ANSI, CAN, and UL standards.

256-NETWORK Contract Office 16 (36C256)

POSTED

DEADLINE

J039--561A4-25-500 Elevator Repair Building 6 and 53

Solicitation # 36C24226R0097

Solicitation 36C24226R0097 is a Request for Proposal issued by the Department of Veterans Affairs for the emergency upgrade and modernization of four elevators at the VA New Jersey Healthcare System Lyons Campus, specifically targeting one passenger elevator in Building 6 and one service and two passenger elevators in Building 53. The scope of work requires the contractor to provide all labor, materials, and supervision to install non-proprietary microprocessor-based control systems, new geared machines, car operating panels with braille markings, hall fixtures at ADA compliant heights, and complete shaft wiring. All work must adhere to current safety codes, including fire recall features and door lock monitoring, and comply with the Davis-Bacon Act for prevailing wage rates. This procurement is a Service-Disabled Veteran-Owned Small Business set-aside under NAICS code 238290. To be eligible, the prime contractor must be a licensed elevator maintenance company with a full-time mechanic on staff and a clean safety record, certifying no more than three serious, one repeat, or one willful OSHA or EPA violation in the last three years. Proposals are evaluated based on technical capability, past performance, and price, with a requirement to submit a current Experience Modification Rate (EMR) and certifications for the Buy American Act and limitations on subcontracting. Following several extensions to accommodate requests for information, the final deadline for proposal submission is 1:00 PM on Thursday, October 29, 2026.

242-NETWORK Contract Office 02 (36C242)

POSTED

about 14 hours ago

DEADLINE

in 22 days

AI Contract Overview

This contract, awarded by the Department of Defense W2SD Endist New England, involves the comprehensive rehabilitation of Pump No. 3 and the restoration of stop gates at the Fox Point Hurricane Barrier in Providence, Rhode Island. The scope of work for Pump No. 3 includes disassembly, component overhauling, reinstallation, and operational testing, alongside the dewatering of the intake sump. Key technical tasks involve repairing or replacing seals, packings, and bearings, aligning and balancing the pump impeller, performing nondestructive testing, and refurbishing the hydraulic system and automatic grease injection system. Additionally, the onsite 40-ton overhead crane must be inspected and load tested before and after each lift. The project also requires the restoration of eight metal stop gates, which involves transporting them to an offsite facility for cleaning, surface preparation, recoating, and the replacement of rubber seals. The contractor is responsible for the proper disposal of all hazardous and nonhazardous waste generated during this process. This award further includes optional lead abatement work to ensure the facility meets safety and environmental standards.

General Info

Agency

Department Of Defense → W2SD Endist New England

Contract Value

$1,328,165.36

NAICS

238290 - Other Building Equipment Contractors

Place of Performance

MA, USA

Set-Aside

NONE

Awardee

CHAS G. ALLEN INCORPORATED

Award Issued Date

07/24/2013, 12:00:00 AM UTC

Documents

BidAbstract.pdf

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

2 updates

PhaseAwarded

PostedApr 4

Presolicitation

Notice updatedMay 9

Response deadline changed from May 20, 2013 to Jun 11, 2013. The notice description changed.

Notice updatedJun 4

Notice details unchanged. Attachments may have changed.

Type ChangedJul 8

Presolicitation → Solicitation

AwardedJul 24

Contract was awarded

Submission Closed

08/12/2013, 12:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → W2SD Endist New England

ContactsNo contacts available

OfficeCONCORD, MA, 01742-2751, USA

Organization / AgencyDepartment Of Defense → W2SD Endist New England

Office AddressCONCORD, MA, 01742-2751, USA

ContactsNo contact information available

Full Description

Work will consist of the disassembly, overhauling of components, reinstallation, and operational testing of Pump No. 3 to include the dewatering of the intake sump. The overhauling will consist of restoring, repairing, and/or replacing packings, glands, seals, seal retainers, shaft sleeves, cover pipe, bolts, nuts, and washers, removal and replacement of existing bearing temperature indicators, rebuilding and alignment of upper guide bearing and motor bearing, removal and replacement of lower guide bearing, realignment and balancing of pump impeller, cleaning, examination and metal stitching on the inside surface of the existing diffuser, the cleaning and recoating of the exterior of the exterior surface of the discharge column and backwater closure valve, removal and replacement of the automatic grease injection system, refurbishing the anti-rotation brakes and the hydraulic system for the backwater closures, and nondestructive testing of the existing impeller. Prior to and after each lift, the onsite 40-ton overhead crane will be inspected and load tested. The work will also include the restoration of eight existing 12 feet long by 6.5 feet wide by 1 foot thick metal stop gates upon the completion of overhauling and rehabilitating Pump No. 3. Restoration will include loading, securing, and transporting the stop gates to an offsite facility, where they will be cleaned, surface prepped, and coated (painted). Upon completion of restoration, stop gates will be loaded, secured, and transported back to Fox Point, to be unloaded and stacked in storage area. To restoration of stop gates will include the removal and replacement of existing rubber seals on each stop gate. Assurance will be required that all debris and hazardous and nonhazardous waste generated during cleaning and surface preparation will be properly disposed of from the facility where the work is to be completed. The optional lead abatement work is also awarded at this time.