Scott Lewis is a government contact at 6933A2 DOT Maritime Administration. Scott is associated with 17 contracts. 6933A2 DOT Maritime Administration has $22,334,226 in total awards. Activity spans Ship Building and Repairing, Fabricated Structural Metal Manufacturing, and Rope, Cordage, Twine, Tire Cord, and Tire Fabric Mills.
Person Profile
Contracting officer information and contact details
The Department of Transportation's Maritime Administration has issued an award notice for the purchase and delivery of synthetic mooring lines under solicitation number 6991PE26P000018. This contract was posted on September 18, 2026, and is designated as a total set-aside for small businesses under NAICS code 314994.
The contract is managed by the office located in Norfolk, Virginia, with the actual place of performance situated in Benicia, California. Primary coordination for this award is handled by Robert McDermott, with Scott Lewis serving as the secondary point of contact.
Department Of TransportationBenicia,
CA,
USA
NAICS
314994
Rope, Cordage, Twine, Tire Cord, and Tire Fabric Mills
The Department of Transportation's Maritime Administration has issued an award notice for the fabrication of two boat landing platforms under solicitation number 6991PE26P000021. This contract was posted on September 9, 2026, and is designated as a total small business set-aside under NAICS code 332312.
The project is managed by the office located in Norfolk, Virginia. Primary coordination for the contract is handled by Robert McDermott, with Scott Lewis serving as the secondary point of contact.
The contract calls for the fabrication of two boat landing platforms designed to be suspended above the water alongside vessels at the Suisun Bay Reserve Fleet. These platforms will serve dual purposes: enabling the secure connection of a ship’s accommodation ladder to its deck and providing a stable docking point for water taxis, work boats, or patrol boats to facilitate the safe embarkation and debarkation of personnel. The project is issued under solicitation number 6991PE26Q000007 and is classified as a total small business set-aside, meaning only small businesses qualify to bid, as defined by the SBA under FAR 19.5 and NAICS code 332312. The U.S. Department of Transportation’s Maritime Administration is the procuring agency, with the office located in Norfolk, Virginia, and the platforms are to be delivered and installed at Suisun Bay. The opportunity was posted on July 19, 2026, with offers due no later than August 12, 2026, at 9:00 PM Eastern Time. Primary points of contact for questions and clarifications are Robert McDermott and Scott Lewis, both reachable via email through the Department of Transportation.
The U.S. Department of Transportation’s Maritime Administration has awarded Contract 6991PE26Q000003 for the drydock and repair of the vessel KESTREL under a total small business set-aside, as defined by the Small Business Administration and governed by FAR 19.5. The contract, solicited under number 6991PE26P000014 and classified under NAICS code 336611 for shipbuilding and repairing, was posted on July 5, 2026, and is managed from the office in Norfolk, Virginia, with performance required in Benicia, California. The award is designated exclusively for small businesses, ensuring that the work is fulfilled by a qualified small business entity. Primary point of contact for the contract is Robert McDermott, reachable at robert.mcdermott@dot.gov, with Scott Lewis serving as the secondary contact. The contract is accessible through the SAM.gov portal for further details and documentation.
The U.S. Department of Transportation’s Maritime Administration is seeking to procure high-performance synthetic mooring lines for vessels in the Suisun Bay Reserve Fleet under a firm fixed price contract set aside entirely for small businesses. The solicitation, numbered 6991PE26Q000006, requires the delivery of five 600-foot and five 400-foot synthetic mooring lines constructed from 12-strand HMPE fiber with U.S.-made fibers, each featuring a six-foot eye splice with chafing protection, a nominal diameter of 7/8 inch, a minimum tensile strength of 79,600 pounds, and a weight not exceeding 45 pounds per 100 feet. Additionally, six 600-foot reels of Samson 1-1/2 inch diameter high tenacity polyester 12-strand line are required, with no splicing. All offerings must include technical data sheets verifying compliance with specified performance criteria such as UV resistance, abrasion resistance, low elongation, and torque resistance. The contract is to be awarded on a Lowest Price Technically Acceptable basis, with only the lowest-priced offer subject to technical and past performance evaluation, which must be acceptable or neutral; failure to meet these thresholds triggers evaluation of subsequent lowest offers. Offers must be submitted electronically by July 6, 2026, at 5:00 PM ET to designated DOT email addresses, excluding any vendor commercial terms, and must include a validated Unique Entity Identifier, signed solicitations, and completed pricing from Attachment 2. The delivery period runs from July 22 to September 16, 2026, with shipment due 56 days after award to the Benicia, California facility under FOB Destination terms. Deliveries must be coordinated with Joe Pecoraro during specified weekday hours and are subject to receipt verification by the Contracting Officer’s Representative. Payment is governed by the DOT’s DELPHI iSupplier system, requiring electronic submission through login.gov with mandatory invoice elements including CLIN-level billing, cumulative totals, and travel receipts. The contract includes mandatory clauses covering prohibited contractor practices, small business obligations, accelerated payments to subcontractors, anti-harassment and Equal Employment Opportunity compliance with flow-down requirements, combating trafficking in persons, and adherence to federal anti-discrimination laws. Contractors must affirm they do not operate DEI initiatives inconsistent with constitutional equal protection principles and comply with occupational safety and hazardous materials
Department Of TransportationBenicia,
CA,
USA
NAICS
314994
Rope, Cordage, Twine, Tire Cord, and Tire Fabric Mills
The contract involves the drydocking and repair of the PF-611 KESTREL, a catamaran hull patrol boat constructed from aluminum. The scope includes hauling out the vessel, performing abrasive grit blasting to preserve the submerged hull surfaces, and cleaning and servicing the boat's jet drives. This maintenance work is essential to ensure the patrol boat remains in optimal condition for its operational duties.
Issued by the Department of Transportation's Maritime Administration office in Norfolk, Virginia, the contract is a total small business set-aside under NAICS code 336611, which covers shipbuilding and repairing. The place of performance is in Benicia, California, and responses to the solicitation are due by April 29, 2026. Interested parties can contact Robert McDermott or Scott Lewis for further information. The contract aims to maintain the vessel’s structural integrity and mechanical functionality to support its mission readiness.
Department Of TransportationBenicia,
CA,
USA$30Kest.
The U.S. Department of Transportation's Maritime Administration, specifically the James River Reserve Fleet, is seeking to procure 27 surface support cylindrical buoys, identified as TIDAL CB 1850 Buoy - Eye & Eye (Yellow), from Go Deep International (N.B.) Inc. The procurement is conducted under the FAR 52.211-6 Brand Name or Equal clause, allowing for comparable products to be considered. Interested vendors are required to submit quotations based on the attached vendor price sheet, with specifications available through the provided link. The solicitation, titled "Combined Synopsis/Solicitation JRRF BUOYS," was posted on September 16, 2025, with a response deadline of September 22, 2025. This procurement is open without any set-aside restrictions and falls under NAICS code 326199, indicating a focus on other plastics manufacturing. The contract performance will take place in Fort Eustis, Virginia, and the primary points of contact are Robert McDermott and Scott Lewis, reachable via email and phone for further inquiries.
Department Of TransportationFort Eustis,
VA,
23604,
USA
The U.S. Department of Transportation's Maritime Administration (MARAD) is seeking to procure the fabrication of two boat landing platforms designed to be suspended above water alongside ships at the Suisun Bay Reserve Fleet. These platforms are intended to facilitate safe boarding and debarking of personnel via ship’s accommodation ladders, as well as allow docking of water taxis, work boats, or patrol boats. The fabrication must adhere to specific drawings provided by the government, with the government furnishing the fabrication drawings, while the contractor is responsible for manufacturing the platforms. The completed platforms are to be delivered to the MARAD facility in Benicia, California.
The solicitation process has undergone multiple amendments, primarily to update the pricing sheet, clarify responses to bidder questions, and adjust the submission deadline to September 19, 2025. The contract is designated as a small business set-aside under NAICS code 336611, emphasizing opportunities for small businesses. The contract emphasizes that the hanging of the platforms from ships will be performed by SBRF personnel, not the contractor. The primary points of contact for this procurement are Robert McDermott and Scott Lewis, with the solicitation details accessible via the provided online link.
Department Of TransportationBenicia,
CA,
94510,
USA
