Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →

Search

Top

CM MANUFACTURING INC

UEI: SLED_999B0DCCA488FBDB

CM MANUFACTURING INC is a federal contractor, registered under UEI SLED_999B0DCCA488FBDB. It has been awarded $11,308,669 across 46 federal contracts. Primary work spans Other Aircraft Parts and Auxiliary Equipment Manufacturing, Hardware Manufacturing, and Bolt, Nut, Screw, Rivet, and Washer Manufacturing. Top awarding agencies include DLA Aviation and DLA Land And Maritime.

Contact Information

Registration and classification details

Registration

UEI Code

SLED_999B0DCCA488FBDB

Federal Contracting Overview

Award totals, agency breakdown, NAICS distribution, and geographic footprint.

AI Capability Profile

CM Manufacturing Inc specializes in precision manufacturing and the production of aerospace and industrial components. Their core capabilities center on the fabrication of aircraft engine and engine parts, as well as the manufacturing of specialized fasteners and precision-machined components. Their...

Key Performance Metrics

Awards Count

0

All time

Active

0

Currently performing

Completed

0

Past period of performance

Total Awards

All time

Contracts

Prime · all time

Subcontracts

Sub · all time

Grants

Prime · all time

Subgrants

Sub · all time

Award Analytics & Distribution

Awards by Agency

DLA Aviation$10.8M95.3%

DLA Land And Maritime$535.2K4.7%

Awards by NAICS

336413 - Other Aircraft Parts and Auxiliary Equipment Manufacturing$6.3M55.3%

332510 - Hardware Manufacturing$2.8M24.8%

332722 - Bolt, Nut, Screw, Rivet, and Washer Manufacturing$1.8M16.3%

332991 - Ball and Roller Bearing Manufacturing$341.3K3%

Others - Other NAICS codes (2 codes, <0.5% each)$70.8K0.6%

Awards by Agency Over Time

Awards by Place of Performance

Open opportunities in CM MANUFACTURING INC's top NAICS codes and agencies

ACTUATOR,ELECTRO-ME

Solicitation # SPRPA126QRC48

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

MANUAL DRIVE SHAFT

Solicitation # SPRPA126QYD33

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

16--MEDIA CANISTER, IN REPAIR/MODIFICATION OF

Solicitation # N0038325RT545

The Department of the Navy, through its NAVSUP Weapon Systems Support office in Philadelphia, PA, has issued a solicitation under the NAICS code 336413 for the repair or modification of media canisters. This contract opportunity, identified by the solicitation number N0038325RT545, was posted on October 14, 2025, with a response deadline of November 13, 2025, at 6:00 PM. The solicitation seeks qualified vendors to provide services related to the repair and/or modification of media canisters, which are likely specialized components essential for naval systems or equipment. Interested parties are directed to communicate with the primary point of contact, Michael J. Brown, whose contact information is provided for further inquiries and clarifications regarding the solicitation. The notice does not specify any set-aside type, suggesting that the competition may be open without specific socioeconomic restrictions. The contract opportunity is published on the federal procurement portal, and all responses should adhere to the requirements and deadline noted in the solicitation. This project supports essential operational needs for the Department of the Navy, emphasizing the importance of timely and compliant responses from interested contractors.

Navsup Weapon Systems Support

POSTED

DEADLINE

in about 1 month

VALVE WINDSHIELD WA

Solicitation # SPRPA126QUB64

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

16--DRIVE,CONSTANT SPEE- AND SIMILAR REPLACEMENT PARTS, IN REPAIR/MODIFICATION OF

Solicitation # N0038326QPC33

The contract solicitation NSN 7R-1650-014369823-SX seeks four units of a constant speed drive and similar replacement parts used in the repair or modification of systems, with delivery terms set at FOB origin. The solicitation, identified by number N0038326QPC33, was posted on August 5, 2026, and responses are due by September 21, 2026. Award will be conditioned on the offeror, product, or manufacturer meeting all qualification requirements at the time of award, as governed by FAR clause 52.209-1. Technical specifications, standards, and qualifying documentation are accessible through ASSIST-Online via the QuickSearch portal, with additional documents obtainable through the DoD Single Stock Point after registration. Patterns, drawings, deviation lists, and purchase descriptions are not available through DODSSP and must be sourced separately. The government has determined that commercial item acquisition policies under FAR Part 12 do not apply, but vendors may still propose commercial alternatives within 15 days of this notice if they can meet the requirement. All inquiries and qualification details should be directed to the primary point of contact, Shamus F. Roache, at the Naval Supply Systems Command in Philadelphia, PA.

Navsup Weapon Systems Support

POSTED

DEADLINE

Relay Switch Box, AN

Solicitation # 70Z03826QJ0000296

Aviation Logistics Center (ALC)(00038)

POSTED

DEADLINE

RF LRM,AIRCRAFT

Solicitation # SPRPA126QZB81

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

Spare power supplies for X59 instrumentation system

Solicitation # 80NSSC26941314Q

NASA Shared Services Center

POSTED

DEADLINE

Solicitation # N0038326RMA90

The contract pertains to the repair, overhaul, and testing of a SENSOR DEVICE identified by part number 1011850-101 and NSN 1680-01-671-2764, under solicitation N0038326RMA90, issued by the Navsup Weapon Systems Support office. All repairs must strictly adhere to the latest approved technical publications and repair manuals, with any deviation requiring formal review and written approval from the Basic Design Engineer and the Procuring Contracting Officer. The contractor is responsible for providing all facilities, labor, tools, materials, and parts necessary to return units to a Ready for Issue condition, unless specifically designated as Government Furnished Material. Items deemed Beyond Economical Repair, Missing on Induction, or requiring Over and Above Repair must be documented and approved by DCMA and the PCO before any work proceeds, with no entitlement to price adjustments if such requests are denied. The contractor must maintain a certified quality management system compliant with ISO 9001/SAE AS9100 and a calibration system meeting ANSI/NCSL Z540.3 or equivalent standards. All purchased components must be new and conform to approved drawings and specifications, with receiving inspections documented and retained for government review. Cannibalization is prohibited unless explicitly approved by NAVSUP WSS and the Basic Design Engineer. The work must be performed at the designated location in Melbourne, FL, under the company DRS Network & Imaging Systems, with a CAGE code provided. Configuration management must follow NAVSUP WSS clause NAVICPIA18, and all changes to drawings, sources, or facilities require written government approval. Packaging must comply with MIL-STD 2073, and the contractor must ensure secure, enclosed storage for both incoming and repaired items. The contract includes mandatory compliance with federal acquisition regulations governing Buy American provisions, safeguarding of arms and explosives, equal opportunity, and electronic invoice submission via Wide Area Workflow. The government accepts early and incremental deliveries, and all contractual documents are deemed issued upon electronic transmission or mail deposit. Proposals are due by August 31, 2026, and the point of contact is Ethan T. Stein at the U.S. Navy.

Navsup Weapon Systems Support

POSTED

DEADLINE

in about 2 months

ENCLOSURE,COMPUTER

Solicitation # SPRPA126QZB93

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

16--BLD AIR SHUTOFF VLV, IN REPAIR/MODIFICATION OF

Solicitation # N0038326QMB12

The U.S. Navy, through NAVSUP Weapon Systems Support, intends to award a sole-source contract for 26 units of the BLD AIR SHUTOFF VALVE with part number 5626-00-1 and NIIN 015612426 under authority of FAR 6.302-1, citing unusual and compelling urgency or sole source justification. The contract action is linked to the repair or modification of equipment and requires delivery FOB origin with the solicitation number N0038326QMB12. The requirement is not open for competitive bidding and is targeted exclusively at the original equipment manufacturer or qualified non-prime sources; any failure to respond will be interpreted as a lack of interest. Responses must be submitted within 45 days of the notice publication date of August 5, 2026, though this window reduces to 30 days if an existing Basic Ordering Agreement is used for award. All submissions will be evaluated solely to determine whether competition is feasible, with the final decision to proceed without competition resting entirely at the government’s discretion. The point of contact for inquiries is Stacey Ryan of the Philadelphia, PA office, reachable via email or phone, with the performance location unspecified but delivery terms clearly defined as FOB origin.

Navsup Weapon Systems Support

POSTED

DEADLINE

16--NETWORK FILE SYSTEM- AND SIMILAR REPLACEMENT PARTS, IN REPAIR/MODIFICATION OF

Solicitation # N0038326QMB07

The contract solicitation NSN 7R-1680-017016574-E7 seeks 14 units of network file system and similar replacement parts for repair or modification purposes under reference number 2829910-020, with delivery terms set at FOB origin. The solicitation, issued by the Naval Supply Systems Command Weapon Systems Support under the Department of Defense, is identified by solicitation number N0038326QMB07 and was posted on August 5, 2026, with responses due by September 21, 2026. The offering is categorized as a presolicitation and does not specify a small business set-aside or NAICS code. Performance location details are not defined, but the issuing office is located in Philadelphia, Pennsylvania, with Peter A. Kobryn listed as the primary point of contact, reachable via email at PETER.A.KOBRYN.CIV@US.NAVY.MIL or by phone at (215) 697-4313. The full solicitation details can be accessed through the SAM.gov workspace link provided.

Navsup Weapon Systems Support

POSTED

DEADLINE

17--SHUTTLE ASSEMBLY

Solicitation # SPRPA126RYC85

The contract solicitation is for 52 units of a flight-critical spare part identified by NSN 7R-1720-011581698-VX, with delivery terms FOB origin and no drawings available. Acquisition is restricted to previously approved sources due to proprietary engineering design capability, unique manufacturing or repair knowledge, and technical data not economically available to the government, all essential to maintaining part quality. Only solicited sources with prior government approval may submit offers; unapproved entities must submit comprehensive qualification data per NAVSUP WSS Source Approval Brochures for spares or repair, including evidence of prior experience with identical or similar items. Proposals lacking required documentation or proof of prior submission will be rejected outright. The approval process for new sources is deemed too time-consuming to allow delays in award, and award may proceed based on fleet support urgency even if source approval cannot be finalized in time. This requirement is fully set aside for small business concerns, with the specific category—HUBZone, service-disabled veteran-owned, economically disadvantaged women-owned, women-owned, or historically black college or minority institution—to be determined and specified in the formal solicitation. The government has determined that commercial item acquisition policies under FAR Part 12 do not apply, though interested parties may propose commercial alternatives within 15 days of notice. Final award is contingent upon the offeror, product, or manufacturer meeting all qualification criteria at the time of award, as required by FAR clause 52.209-1. All technical documents can be obtained through ASSIST-Online or the DODSSP, though patterns, drawings, and deviation lists are not available through those channels. Additional information regarding qualifications may be obtained from the point of contact listed in the solicitation.

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

MOISTURE SEPARATOR

Solicitation # SPRPA126QUB63

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

ACTUATOR TRAY ASSY,

Solicitation # SPRPA126QUB68

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

BALL, SCREW ASSEMBLY

Solicitation # SPMYM326Q8023

This solicitation, identified as SPMYM326Q8023, is a combined synopsis and solicitation for commercial items issued under FAR Part 12 and Simplified Acquisition Procedures, with no paper copies available and all information posted exclusively on SAM.gov. The requirement is for two Ball, Screw Assemblies, specifically OEM part number B15125C Rev-D manufactured by Beaver Aerospace & Defense Inc., furnished as a fully machined and assembled unit in compliance with proprietary technical data. This is a sole-source procurement due to the proprietary nature of the drawing and OEM status, and quotations from any other manufacturer will be rejected outright. Offerors must be registered and active in SAM.gov, possess a valid CAGE code, and submit complete responses via email to sam.j.aiguier.civ@us.navy.mil and DLA-KME-QUOTATIONS@DLA.MIL by the deadline of July 28, 2026, at 12:00 PM EST. Evaluation will be conducted using the Lowest Price Technically Acceptable method, with technical acceptability determined by strict adherence to specifications, including the requirement for quality certifications, test results, and supply chain traceability documentation. Responsibility screening will be conducted through PPIRS and FAR 9.104 criteria. All respondents must complete and include with their offer the signed Security Agreement for Protection of Naval Nuclear Propulsion Information and DD Form 2345 to obtain proprietary drawings. Proposals must include pricing, FOB Destination terms, business size under NAICS 332991, and payment preference between Government Commercial Purchase Card (GCPC) or Wide Area Workflow (WAWF). If GCPC is selected, a receiving report must be submitted via WAWF. Offerors not the original manufacturer must disclose the manufacturer’s name, location, and business size. The contract incorporates a comprehensive array of FAR, DFARS, DLAD, and local clauses related to cybersecurity (including NIST SP 800-171 and DFARS 252.204-7012), prohibitions on covered telecommunications equipment, trafficking in persons, labor standards, environmental controls, Buy American restrictions, and export control requirements. Items must be delivered to Kittery, Maine, by September 28, 2026, with inspection and acceptance occurring at destination per QA-4 terms and constructive acceptance extended to 45 calendar days. Packaging must conform to

DLA Maritime - Portsmouth

POSTED

DEADLINE

RADOME ASSEMBLY

Solicitation # SPRPA126QUB62

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

16--DRAG BRACE,LANDING

Solicitation # SPRPA126RXB58

The contract pertains to the acquisition of five Drag Brace Landing gear components identified by NSN 7R-1620-014086637-EL and reference number 123SCL5003-3, with delivery terms FOB origin. This item is designated as flight critical and requires government source approval prior to award due to the absence of adequate technical data or manufacturing knowledge in government possession, preventing acquisition through full and open competition. Only previously approved sources specified under DoD-STD-100 may be considered, and no alternative sources may be qualified in time to meet delivery requirements. Prospective vendors who are not existing approved sources must submit comprehensive documentation outlined in the NAVSUP Weapon Systems Support Source Approval Information Brochures, either for spares or repair, based on their experience with identical or similar items. Failure to provide complete documentation or proof of prior submission will result in rejection of the proposal. If source approval cannot be finalized, award may still proceed based on fleet support needs. The government intends to proceed under FAR 6.302-1 as a sole source procurement, and while non-approved sources may submit proposals within 45 days of the notice, such submissions are evaluated solely for potential future competition. Commercial item alternatives may be proposed within 15 days, but the government confirms it will not apply FAR Part 12 policies for this acquisition. All technical specifications and standards referenced are accessible through ASSIST-Online or DODSSP, with physical copies available upon request. The requirement is managed by the Department of Defense through DLA Aviation in Philadelphia, with Sean Geiger as the point of contact.

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE