Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

COMPTECH CORPORATION

UEI: FVNNMRJ9H3N4

COMPTECH CORPORATION is a federal contractor, registered under UEI FVNNMRJ9H3N4. It has been awarded $73,937,750 across 2,267 federal contracts. Primary work spans Unknown NAICS, Other Aircraft Parts and Auxiliary Equipment Manufacturing, and Other Motor Vehicle Electrical and Electronic Equipment Manufacturing. Top awarding agencies include Department Of Defense and Other agencies (3 agencies, <0.5% each).

Contact Information

Registration and classification details

Registration

UEI Code

FVNNMRJ9H3N4

Federal Contracting Overview

Award totals, agency breakdown, NAICS distribution, and geographic footprint.

Key Performance Metrics

Awards Count

0

All time

Active

0

Currently performing

Completed

0

Past period of performance

Total Awards

All time

Contracts

Prime · all time

Subcontracts

Sub · all time

Grants

Prime · all time

Subgrants

Sub · all time

Award Analytics & Distribution

Awards by Agency
Export
Department Of Defense$73.8M99.8%
Other agencies (3 agencies, <0.5% each)$168.7K0.2%
Awards by NAICS
Export
- Unknown NAICS$10.2M13.9%
336413 - Other Aircraft Parts and Auxiliary Equipment Manufacturing$8.8M11.9%
336322 - Other Motor Vehicle Electrical and Electronic Equipment Manufacturing$4.5M6.1%
336399 - All Other Motor Vehicle Parts Manufacturing$3.2M4.3%
335312 - Motor and Generator Manufacturing$3.1M4.2%
336412 - Aircraft Engine and Engine Parts Manufacturing$2.4M3.3%
339991 - Gasket, Packing, and Sealing Device Manufacturing$1.9M2.6%
334519 - Other Measuring and Controlling Device Manufacturing$1.9M2.6%
336411 - Aircraft Manufacturing$1.6M2.2%
334419 - Other Electronic Component Manufacturing$1.6M2.2%
441310 - Automotive Parts and Accessories Stores$1.6M2.1%
332722 - Bolt, Nut, Screw, Rivet, and Washer Manufacturing$1.4M2%
339999 - All Other Miscellaneous Manufacturing$1.3M1.8%
333612 - Speed Changer, Industrial High-Speed Drive, and Gear Manufacturing$1.3M1.8%
332999 - All Other Miscellaneous Fabricated Metal Product Manufacturing$1.3M1.8%
332991 - Ball and Roller Bearing Manufacturing$1.3M1.7%
336992 - Military Armored Vehicle, Tank, and Tank Component Manufacturing$1.2M1.7%
333613 - Mechanical Power Transmission Equipment Manufacturing$1.2M1.6%
334415 - Electronic Resistor Manufacturing$1.2M1.6%
334511 - Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing$1.0M1.4%
325188 - All Other Basic Inorganic Chemical Manufacturing$940.1K1.3%
333618 - Other Engine Equipment Manufacturing$877.6K1.2%
336211 - Motor Vehicle Body Manufacturing$856.2K1.2%
332510 - Hardware Manufacturing$776.3K1.1%
314912 - Canvas and Related Product Mills$639.6K0.9%
335314 - Relay and Industrial Control Manufacturing$637.1K0.9%
332919 - Other Metal Valve and Pipe Fitting Manufacturing$632.1K0.9%
332912 - Fluid Power Valve and Hose Fitting Manufacturing$606.2K0.8%
332911 - Industrial Valve Manufacturing$558.0K0.8%
335999 - All Other Miscellaneous Electrical Equipment and Component Manufacturing$549.0K0.7%
334418 - Printed Circuit Assembly (Electronic Assembly) Manufacturing$544.4K0.7%
336311 - Carburetor, Piston, Piston Ring, and Valve Manufacturing$526.1K0.7%
334290 - Other Communications Equipment Manufacturing$516.4K0.7%
332995 - Other Ordnance and Accessories Manufacturing$496.0K0.7%
541710 - Research and Development in the Physical, Engineering, and Life Sciences$475.1K0.6%
332710 - Machine Shops$459.9K0.6%
334417 - Electronic Connector Manufacturing$439.0K0.6%
334220 - Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing$438.1K0.6%
335311 - Power, Distribution, and Specialty Transformer Manufacturing$437.4K0.6%
333911 - Pump and Pumping Equipment Manufacturing$417.3K0.6%
335121 - Residential Electric Lighting Fixture Manufacturing$402.8K0.5%
332996 - Fabricated Pipe and Pipe Fitting Manufacturing$401.9K0.5%
334416 - Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing$387.7K0.5%
335931 - Current-Carrying Wiring Device Manufacturing$372.7K0.5%
Others - Other NAICS codes (107 codes, <0.5% each)$8.5M11.4%
Awards by Agency Over Time
Export
Awards by Place of Performance

Open opportunities in COMPTECH CORPORATION's top NAICS codes and agencies

NAICS: 335999
New
DIBBS
Supply of Insulating Cover Blanket (NSN: 1660-01-472-5136)The contract calls for the supply of 306 new and unused insulating cover blankets identified by NSN 1660-01-472-5136, all of which must comply with military specifications to ensure functional integrity and safety. These blankets are critical components intended for operational use where thermal protection and reliability are non-negotiable, and the requirement emphasizes that no used, refurbished, or non-conforming items will be accepted. The solicitation is categorized as a subcontract under NAICS code 335999, indicating it falls within other electrical equipment and component manufacturing, and is managed by the ASC SUPPLIER OPER AE AND AF DIV within the Department of Defense. The opportunity was posted on August 5, 2026, with a firm response deadline of August 11, 2026, leaving a six-day window for qualified suppliers to submit proposals. While the place of performance and point of contact details are unspecified, the transaction is facilitated through the DIBBS system, and vendors must ensure full adherence to military standards and delivery timelines to meet contractual obligations.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 5 hours ago

DEADLINE

in 6 days
View Details
NAICS: 335999
New
DIBBS
Supply of Electronic Shielding Gaskets (NSN: 5999-01-506-4338)
LAND SUPPLIER OPERATIONS SMSG

POSTED

about 5 hours ago

DEADLINE

in 30 days
View Details
NAICS: 332510
New
DIBBS
Supply of Machine Thread Plugs (NSN: 5365-011146444)The contract entails the supply of standardized machine thread plugs designated by NSN 5365-011146444, manufactured to meet military specifications for precision applications in defense or industrial systems. These components are critical for ensuring thread integrity and dimensional accuracy in high-stakes operational environments, requiring strict adherence to quality and performance standards. The offering is structured as a subcontract with recurring delivery obligations, indicating an ongoing need for these hardware items across multiple procurement cycles. The solicitation was posted on August 5, 2026, with a response deadline of August 12, 2026, and is administered by the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense. The North American Industry Classification System code 332510 identifies the category as machine shop and related services, underscoring the manufacturing and precision machining nature of the work. Performance is expected to be coordinated under DLA-managed logistics channels, though specific delivery locations are not outlined. Interested parties must respond through the official DIBBS portal prior to the deadline to be considered for award.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 5 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332991
New
DIBBS
BEARING, ROLLER, AIRFRAME
Solicitation # SPE4A6-26-R-XC13
The contract is for one roller bearing, airframe model DAS6-25C, identified by NSN 3110-00-143-3010, under solicitation SPE4A6-26-R-XC13. The item is classified as a critical application component and must be manufactured entirely in the United States, its outlying areas, or Canada, with over 50% of the total cost of all bearing components—rolling elements, retainer, inner race, and outer race—originating from these regions. A signed contractor’s declaration confirming the domestic origin of materials is required and must be submitted upon request; failure to provide this will disqualify the quote. The solicitation is subject to cancellation if no compliant offers are received, with potential reinstatement only after a formal waiver is approved. Pricing is firm fixed, with no variance allowed in quantity, and delivery is due 177 days after award. Inspection and acceptance occur at destination, with FOB terms also at destination. Packaging and preservation must follow MIL-STD-2073-1E, MIL-DTL-197M, and all DLA packaging requirements, including specific preservation methods determined by bearing type and closure, approved lubricants, and stringent quality verification controls. Marking must comply with MIL-STD-129 using special marking code ZZ-ZZ and no government identification may be removed from non-accepted supplies. Unit of issue is each, and no item unique identification is required per the service customer’s request. Measuring and test equipment must be calibrated and traceable, and documentation for source approval is governed by RC001. All technical and quality requirements referenced by R or I numbers are incorporated from the DLA Master List of Technical and Quality Requirements. The solicitation was issued on August 5, 2026, with responses due by August 19, 2026.
ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332991
New
DIBBS
ROLLER ASSEMBLY, CON
Solicitation # SPE8EF-26-Q-0165
The contract is for the procurement of 20 roller assemblies with NSN 1730-01-245-7322 under solicitation SPE8EF-26-Q-0165, with a 60-day delivery requirement from award. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled based on the type of acquisition and applicable dates. Packaging must comply with DLA standards, and government identification must be removed from non-accepted supplies. The contractor must be certified at CMMC Level 2 by an approved third-party assessment organization and handle covered defense information in accordance with applicable regulations. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, and attributes must be verified at designated levels or AQLs. Technical data associated with this item is subject to export control under ITAR or EAR, requiring prior government authorization for disclosure or transfer, including to foreign nationals within the United States. Access to this controlled data is restricted to contractors with approved JCP certification, completed DOD training, and DLA authorization. The contract is issued by the Department of Defense, with Sharon Forde as the primary point of contact.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 5 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
NRP, LP HOSE ASSY-6A
Solicitation # SPE8EF-26-T-1589
This contract pertains to the procurement of NRP, LP HOSE ASSY-6A, identified by NSN 1730-01-655-9887 and part number 8028-080-8050-6 from PROGRESSIVE HYDRAULICS, INC., with a quantity of five units to be delivered under solicitation SPE8EF-26-T-1589. The item is classified as a TYPE I (CODE S) with a non-extendable shelf life of 60 months, as mandated by RS023, and requires compliance with DLA packaging standards under RP001 and MIL-STD-2073-1E, including specific packing methods, preservation, and marking per MIL-STD-129 with Special Marking Code 32. Delivery is FOB origin, with inspection and acceptance occurring at the destination, and no variance in quantity is permitted. The required delivery date is 167 days from contract award, with an original deadline of March 8, 2027, and a need ship date of February 1, 2027. The item must be shipped to the designated delivery address in Tracy, California, under transportation guidelines noted in DLAD Procurement Notes C19 and C20. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, and the version in effect on the solicitation issue date controls. The contract is subject to Covered Defense Information clauses and utilizes the DoD unit of issue, with pricing set at $5.00 per unit for a total value of $25.00.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 5 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336413
New
DIBBS
STEP, AIRCRAFT
Solicitation # SPE4A0-26-T-4173
This contract is for the procurement of one unit of a specific aircraft component identified by NSN 1560016184311 and part number 70217-02500-042 from Sikorsky Aircraft Corporation, with delivery required within five days of award at FOB origin. The item must be packaged and labeled in full compliance with DLA packaging requirements, specifically RP001, and marked per MIL-STD-129; if nonhazardous, packaging must adhere to ASTM D3951 unless superseded by higher-priority DLA technical requirements. Traceability documentation must be retained by the contractor under DLA Directive Procurement Note C03 from August 2016, and physical identification of the item must be performed as specified under RQ017. The contractor must also comply with Cybersecurity Maturity Model Certification Level 2 self-assessment requirements. Sampling for conformity is permitted under Sikorsky’s alternate plan QAP 1201, provided it meets or exceeds the standards of ASQ H1331 or MIL-STD-1916. Inspection and acceptance occur at destination, with no tolerance for quantity variance. Delivery must be shipped via a fast, traceable means, strictly avoiding parcel post, to the designated Naval Air Station North Island location. Unit of issue is each, and item unique identification is not required per service customer request. The delivery deadline is July 31, 2026, and all technical and quality specifications referenced by R or I numbers are drawn from the DLA Master List of Technical and Quality Requirements effective as of the solicitation issue date.
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332911
New
DIBBS
DISK, VALVE
Solicitation # SPE7MC-26-T-168C
The contract specifies the procurement of a single disk valve, identified by NSN 4820012210266, to be delivered to the USS BOXER LHD 4 at FPO AP 96661 under FOB Destination terms with a 20-day delivery window from the order date. The item is subject to strict DLA packaging and marking requirements, mandating compliance with MIL-STD-2073-1E for preservation and packaging, and MIL-STD-129 for labeling and barcoding, with no special marking required. Packaging must use polyethylene film wrap, fiberboard unit and intermediate containers, and adhere to DLA’s RP001 packaging guidelines. The contract explicitly prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, with exceptions limited to functional uses in batteries, fluorescent lamps, sensors, controls, weapon systems, or specified chemical reagents; portable mercury-containing devices must include a secondary containment and comply with NAVSEA 5100-003D. Hazardous materials must be labeled in accordance with OSHA’s Hazard Communication Standard, and any radioactive content exceeding specified thresholds must be disclosed and marked. Acceptance and inspection occur at the delivery point under FAR 52.246-2, and payment must be processed electronically through WAWF using the Invoice & Receiving Report format. The solicitation requires offerors to certify their Small Business status, UEI, and compliance with various FAR/DFARS clauses, including those on trafficking in persons, employment eligibility, sustainable products, cybersecurity controls, and prohibitions on hexavalent chromium. Contractual obligations also include adherence to FAR 52.222-36 and 52.222-50 regarding equal opportunity and anti-trafficking, FAR 52.227-1 for authorization and consent, and FAR 52.232-40 for accelerated payments to small business subcontractors. The performance location is a naval vessel with no designated Contracting Officer’s Representative mentioned, and the solicitation does not include evaluation factors, options, or detailed technical specifications beyond compliance-driven requirements. The contract is tied to a procurement request number and historical pricing data, but the current unit price is not stated, and the solicitation anticipates an automated award process consistent with its simplified nature.
Defense Logistics Agency

POSTED

about 5 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332722
New
DIBBS
NUT, PLAIN, HEXAGON
Solicitation # SPE4A6-26-R-XB62
The contract is for the procurement of 300 plain hexagon nuts, identified by NSN 5310-01-368-5549, under solicitation SPE4A6-26-R-XB62, with a firm fixed price and no tolerance for quantity variation. Delivery is required within 240 days after award, with inspection and acceptance occurring at the contractor’s origin facility. The item is classified as a Critical Safety Item and a Critical Application Item, necessitating strict adherence to quality, traceability, and documentation requirements. All suppliers must comply with SAE AS9100 higher-level quality standards, MIL-STD-1916 or equivalent zero-based sampling plans, and strict physical identification mandates per RQ017, including bare item marking with lot and serial numbers, contractor and manufacturer CAGE codes, and part number. Packaging must follow MIL-STD-2073-1E with preservation method 33, and marking of all unit packs must conform to MIL-STD-129, including 2D barcoding, and palletization must meet DLA’s RP001 requirements. No special marking is required beyond these standards. The contract includes a comprehensive set of FAR and DFARS clauses governing changes, subcontracting, labor practices, trafficking, termination, counterfeit part avoidance, electronic parts sourcing, transportation, and cybersecurity, with multiple deviations authorized under deviation 2026-00038. All waivers or deviations must be reviewed and approved by the DSC Contracting Officer. Pricing is not specified, but the total contract value is capped at $350,000 across the five-year indefinite delivery period. Payment is mandatory via WAWF, and offers must be submitted through DIBBS or by email, fax, or hard copy to the designated DLA point of contact by August 14, 2026. The award is based on a trade-off evaluation where past performance, particularly quality and delivery history captured through PPIRS-SR, is significantly more important than cost or other non-price factors. Offerors must be registered in SAM with valid UEI and CAGE codes, and while socioeconomic status is solicited, no affirmative responses are required to be completed within the solicitation itself. All technical and quality requirements are governed by the DLA Master List, and the contractor is responsible for ensuring full compliance from production through delivery, including flow-down of requirements to subcontractors
ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

in 9 days
View Details
NAICS: 332510
New
DIBBS
BRACKET, MOUNTING
Solicitation # SPE7LX-26-U-9329
This contract, issued under solicitation number SPE7LX-26-U-9329 by the Defense Logistics Agency’s Strategic Acquisition Program Directorate, is an indefinite-delivery/indefinite-quantity (IDIQ) contract for the procurement of right-hand single-arm mounting brackets identified by NSN 5340-01-615-0030. The estimated annual quantity is 176 units, with a guaranteed minimum of 26 units and a maximum contract value capped at $350,000. Deliveries are FOB origin, with inspection and acceptance occurring at the destination, and the contract is structured as a total small business set-aside under NAICS code 332510. The contractor must comply with stringent packaging and marking specifications outlined in MIL-STD-2073-1E and MIL-STD-129, including preservation methods requiring cold/dry cleaning and drying, and identification marking conforming to MIL-STD-130N with DoD UID-compliant Data Matrix barcodes. Packaging must also adhere to DLA’s RP001 requirements, with no special marking required beyond standard compliance. Sampling for quality assurance must follow MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required for acceptance unless otherwise specified, and verification levels are strictly defined for critical, major, and minor attributes. The contract mandates adherence to a suite of defense and federal regulations including hazardous material handling under 29 CFR 1910.1200, prohibition of hexavalent chromium, compliance with NIST SP 800-171 cybersecurity standards, and prohibition on acquisition from specified Chinese military companies. Invoicing must be conducted electronically through WAWF, and payment is subject to DoD Activity Address Codes for routing. Offerors must represent their small business status accurately and provide UEI and CAGE codes if applicable, with flow-down provisions extending many requirements to subcontractors. All performance is contingent upon delivery orders issued during the contract period, with no fixed delivery schedule beyond the 116-day lead time for initial fulfillment. Non-compliance with technical, packaging, or regulatory provisions may result in rejection at destination.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 5 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332722
New
DIBBS
PLUG, MACHINE THREAD
Solicitation # SPE4A7-26-Q-0974
The contract pertains to the procurement of seven units of a machine thread plug with NSN 5365-00-854-2899, issued under solicitation number SPE4A7-26-Q-0974 by the Department of Defense’s ASC SUPPLIER OPER AE AND AF DIV. Delivery is required within 182 days after contract award, and responses must be submitted by August 15, 2026. Technical data associated with this item is subject to strict export controls under either ITAR or EAR, meaning any disclosure to foreign persons—even within the United States—is prohibited without prior authorization from the Department of State or Department of Commerce. DFARS 252.225-7048 governs the handling of this controlled information, and only contractors certified under the US/Canada Joint Certification Program, with completed DLA training and approved access, are permitted to receive the technical data. The primary point of contact for the solicitation is Mykhara Robinson, reachable via email at mykhara.robinson@dla.mil.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 5 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332996
New
DIBBS
ELBOW, PIPE TO TUBE
Solicitation # SPE7M3-26-T-7852
The contract is for the procurement of 169 units of an elbow fitting designed to connect pipe to tube, identified by NSN 4730-00-090-8665 and part number MS51813-3, manufactured in compliance with MIL-DTL-18866K and MS51813G specifications. The item must adhere to strict technical and quality standards as defined in the DLA Master List of Technical and Quality Requirements, with procurement governed by full and open competition. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute materials require prior approval unless explicitly authorized by the specification. Delivery is required within 154 days from the contract award, with the product to be shipped FOB origin and subjected to inspection and acceptance at the destination. Packaging must follow MIL-STD-2073-1E and MIL-STD-129 guidelines, with no special marking required and palletization aligned with DLA packaging standards. The unit of issue is each, with a fixed quantity and zero variance allowed, priced at $169.00 per unit for a total contract value of $28,561. Delivery is directed to the DLA Distribution facility in New Cumberland, Pennsylvania, with a required ship date of January 19, 2027, and an original delivery deadline of January 5, 2027. Transportation details follow DLA Procurement Notes C19 and C20, and all correspondence must reference the solicitation number SPE7M3-26-T-7852.
FLUID HANDLING DIVISION

POSTED

about 5 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332999
New
DIBBS
PLASTIC STRIP, PRESS
Solicitation # SPE8E5-26-T-3824
The contract specifies the procurement of 6 roll units of plastic strip with pressure-sensitive adhesive coating, identified by NSN 9330-01-580-6367 and referenced under solicitation SPE8E5-26-T-3824, issued by the Defense Logistics Agency. Each roll equals 36 yards, with a total quantity of 216 yards required, to be delivered FOB origin within 167 days from the contract award, with no variance allowed in quantity. Delivery must be made to DLA Distribution Warner Robins at Robins Air Force Base in Georgia, with inspection and acceptance occurring at the destination. Packaging must comply with DLA Packaging Requirements, MIL-STD-129 for marking and labeling, and either ASTM D3951 for non-hazardous material or TQ requirement IP025 if classified as hazardous under FED-STD-313, with DLA's Technical and Quality Requirements taking precedence over any other standard. The product must conform to approved specifications from 3M or Landsberg Kent H Co with specified part numbers. All packaging and palletization must adhere strictly to RP001 guidelines. The contract requires delivery by February 1, 2027, with an original required date of November 12, 2026, and transportation and shipping instructions are governed by DLA Procurement Notes C19 and C20. Point of contact for inquiries is Khue Nguyen of the Department of Defense.
WARNER ROBINS

POSTED

about 5 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332722
New
DIBBS
COLLAR, PIN-RIVET
Solicitation # SPE4A6-26-T-12TU
The contract pertains to the procurement of 822 units of COLLAR, PIN-RIVET with NSN 5320-01-596-1012 and part number HL379-6, sourced from approved manufacturers including HOWMET GLOBAL FASTENING SYSTEMS INC and HI-SHEAR CORPORATION. Delivery is required FOB origin within 121 days, with no variance allowed in quantity, and inspection and acceptance must occur at the manufacturing origin in compliance with stringent quality standards. All items must adhere to MIL-STD-2073-1E packaging requirements and MIL-STD-129 marking standards, with no special marking codes applied. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, and sampling must follow MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required unless otherwise stated. Critical threads must be gaged per SAE AS8879 Category 1 or MIL-S-7742, excluding self-locking nuts and small-diameter threads. Documentation for source approval is mandated, and all supplies must meet tailored higher-level quality requirements. Item Unique Identification is not required per Service customer direction. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, and transportation logistics follow DLA procedural notes C19 and C20. The contract was solicited under SPE4A6-26-T-12TU with a response deadline of August 13, 2026, and a required ship date of December 13, 2026.
ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334511
New
DIBBS
SLOT FILLER MODULE
Solicitation # SPE8E9-26-T-3350
The contract pertains to the procurement of 37 SLOT FILLER MODULES under NSN 7050-01-487-3044, with a delivery requirement of 21 days after award. The solicitation, identified as SPE8E9-26-T-3350, was posted on August 5, 2026, and responses are due by August 17, 2026. The acquisition falls under NAICS code 334511 and is managed by the Department of Defense’s Construction & Equipment MRO Service I office, with performance required at New Cumberland, PA, ZIP 17070-5002. The primary point of contact is Matthew Kruc, reachable via email and phone provided. All supplies must comply with DLA Packaging Requirements and the DLA Master List of Technical and Quality Requirements, which are incorporated by reference and whose applicable revision is determined by the solicitation or award date. Mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the hardware, except for specific functional uses such as batteries, fluorescent lamps, sensors, weapon systems, or authorized chemical reagents, all of which must meet additional containment and safety standards per NAVSEA 5100-003D, including shock-proof design and a secondary containment boundary for portable devices.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 5 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332510
New
DIBBS
CLAMP, LOOP
Solicitation # SPE7L1-26-T-917N
This contract, identified by solicitation number SPE7L1-26-T-917N, is for the procurement of 346 units of a clamp and loop component with NSN 5340-01-030-4980, priced at $346.00 per unit, totaling $119,716.00. Delivery is required FOB origin within 119 days, with the original delivery date set for November 25, 2026, and a needed ship date of December 15, 2026. All supplies must comply with stringent technical and quality requirements drawn from the DLA Master List of Technical and Quality Requirements, with specific mandates including MIL-STD-130N for identification marking, MIL-STD-1916 or ASQ H1331 for zero-defect sampling, and strict adherence to packaging standards per MIL-STD-129 and RP001. The use of Class I ozone depleting chemicals is strictly prohibited, and any substitution requires prior approval. Compliance documentation such as the Certificate of Quality Compliance is mandatory, and the Certificate of Conformance procedures under FAR 52.246-15 are authorized unless overridden by a Quality Assurance Letter of Instruction. The item must be shipped to the designated delivery point at DLA District San Joaquin, 25600 S Chrisman Road, Rec Whse 57, Tracy, CA 95304-5000, with packaging requirements depending on hazardous material status per FED-STD-313: non-hazardous items follow ASTM D3951 unless superseded by DLA requirements, while hazardous items must comply with TQ requirement IP025. Palletization must conform to DLA packaging guidelines, and all packaging and labeling must meet MIL-STD-129 with correct Unit of Issue and Quantity per Unit Pack as specified. The contract mandates full and open competition with no set-asides, and all technical data and revisions referenced, including TDP Rev A Gen 1 based on drawing NR 19207, take precedence. Transportation directives are governed by DLAD Proc Notes C19 and C20, and the official point of contact for procurement inquiries is Isabelle Szulewski, reachable via email and phone listed in the contract.
LAND SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332991
New
DIBBS
CASE, PHOTOGRAPHIC E
Solicitation # SPE8EN-26-T-2849
The contract is for the procurement of 20 units of a photographic equipment case, identified by NSN 6760-01-491-2090 and vendor part number P/N 1450 from Pelican Products Inc. The item must be delivered within 20 days from the order date, FOB origin, with no tolerance for quantity variance. Inspection and acceptance occur at the destination, and packaging must comply strictly with ASTM D3951 while adhering to all higher-priority DLA Master List of Technical and Quality Requirements, including MIL-STD-129 labeling and RP001 palletization standards. The equipment does not involve ozone-depleting substances and must be shipped using the fastest traceable means, explicitly excluding parcel post. Shipping instructions designate a specific military freight address in Portsmouth, NH, with a RDD code of 777 and project identifier TP 2. The contract includes mandatory adherence to DLA’s technical and quality requirements referenced by R and I numbers, accessible via the official DLA website, and requires removal of government identification from non-accepted materials. The solicitation number is SPE8EN-26-T-2849, with a response deadline of August 17, 2026, and the issuing agency is the Department of Defense’s Construction & Equipment T & IFO EQ office, with Jennifer Esworthy listed as the primary point of contact.
CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

about 5 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336413
New
DIBBS
SKIN, AIRCRAFT
Solicitation # SPE4A7-26-T-617T
The contract pertains to the procurement of one aircraft skin identified by NSN 1560-01-366-4266, with a delivery requirement of 142 days after order. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation or award date depending on acquisition size. The item is subject to stringent documentation and compliance requirements including source approval submission, DLA packaging standards, and cybersecurity maturity model certification level 2 by a certified third-party assessment organization. Configuration changes require formal engineering change proposals for any deviations or waivers. Inspection and acceptance must occur at the manufacturer’s origin, and non-accepted items must have all government identification removed. Components are governed by Qualified Products Lists or Qualified Manufacturers Lists as defined in procurement note H02, and physical marking of the bare item is mandatory. While unique identification is not required per the service customer’s request, export control restrictions apply to associated technical data under ITAR or EAR, requiring prior authorization for any disclosure to foreign persons, including employees of U.S. companies abroad. Distribution of such data is restricted to DLA contractors with approved US/Canada Joint Certification Program status, confirmed training completion, and formal DLA authorization. The contract falls under solicitation SPE4A7-26-T-617T, issued by the Department of Defense through the ASC Supplier Operation AE and AF Division, with performance at Tinker AFB and a response deadline of August 13, 2026.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details