Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

CREATIVE ELECTRON INC. San Marcos CA USA

UEI: SLED_50E1098F9C431730

CREATIVE ELECTRON INC. San Marcos CA USA is a federal contractor, registered under UEI SLED_50E1098F9C431730. It has been awarded $68,795 across 1 federal contract. Primary work spans Irradiation Apparatus Manufacturing. Top awarding agencies include Mrpbs Minneapolis Mn.

Contact Information

Registration and classification details

Registration

UEI Code

SLED_50E1098F9C431730

Federal Contracting Overview

Award totals, agency breakdown, NAICS distribution, and geographic footprint.

Key Performance Metrics

Awards Count

0

All time

Active

0

Currently performing

Completed

0

Past period of performance

Total Awards

All time

Contracts

Prime · all time

Subcontracts

Sub · all time

Grants

Prime · all time

Subgrants

Sub · all time

Award Analytics & Distribution

Awards by Agency

Mrpbs Minneapolis Mn$68.8K100%

Awards by NAICS

334517 - Irradiation Apparatus Manufacturing$68.8K100%

Awards by Agency Over Time

Awards by Place of Performance

Open opportunities in CREATIVE ELECTRON INC. San Marcos CA USA's top NAICS codes and agencies

6525--JUN 2026 Equipment Only Consolidation

Solicitation # 36A79726Q0011

The contract titled 6525--JUN 2026 Equipment Only Consolidation is a presolicitation notice issued by the Department of Veterans Affairs under the Nac High Technology Orders (36A797) agency, with the solicitation number 36A79726Q0011. It is categorized under NAICS code 334517, which corresponds to the manufacturing of electronic instrumentation for measuring and testing, indicating the procurement is focused on specialized equipment. The opportunity was posted on August 5, 2026, with a response deadline of October 14, 2026 at 4:59 PM ET, providing potential vendors a limited timeframe to prepare and submit their proposals. The place of performance is currently unspecified, but the contracting office is located in Hines, Illinois, ZIP code 60141. There is no designated set aside type listed, meaning the procurement is open to all qualified offerors without exclusions based on business size or socio-economic categories. The primary point of contact is Hermann Degbegni, Contract Specialist, reachable via email at Hermann.Degbegni@va.gov or by phone at 281-851-6993. Interested parties can access further details and the official solicitation through the provided SAM.gov portal link.

Nac High Technology Orders (36A797)

POSTED

about 11 hours ago

DEADLINE

Radiography Sensor and Software

Solicitation # W81K00-26-Q-A254

This solicitation seeks quotes for the iM3 USA Dental Radiography Sensor and Software to support the Animal Health Branch of the Division of Veterinary Science at the Medical Center of Excellence in Fort Sam Houston, Texas, with all deliveries required on or before September 30, 2026. Issued under the simplified acquisition procedures of FAR Part 13 and formatted per FAR Subpart 12.6, the procurement is conducted as full and open competition under NAICS code 334517, which applies to businesses with up to 1,200 employees. The solicitation number is W81K00-26-Q-A254 and is based on a brand-name-or-equal specification, allowing for equivalent products that meet defined performance standards. All offers must be submitted via email by 6:00 AM Central Standard Time on August 14, 2026, and any questions must be received by August 12, 2026, with no exceptions permitted after that cutoff. The point of contact for the solicitation is Mr. Efren Ramirez, who can be reached by email at efren.b.ramirez.civ@health.mil or by phone at 210-808-5790. The procurement is managed by the Department of Defense through the W40M USA Hca office located at JBSA Fort Sam Houston, Texas, with the place of performance also in San Antonio, Texas. The solicitation reflects the most current Federal Acquisition Regulation and Defense Federal Acquisition Regulation Supplement updates through Federal Acquisition Circular 2026-01 and DPN 20260702. No set-aside categories apply, and the government expects competitive, compliant bids from qualified vendors capable of delivering the specified equipment and software by the required deadline.

POSTED

about 11 hours ago

DEADLINE

Supply of Purple Prism Traps with GlueThe contract involves the procurement and delivery of 6,000 Purple Prism Traps with glue over a three-year period, with 2,000 units to be supplied annually for monitoring Buprestidae beetles under an IDIQ framework. The effort is categorized as a Small Business Set Aside, specifically reserved for small businesses under NAICS code 339920, indicating that only qualified small businesses are eligible to submit proposals. The solicitation was posted on August 4, 2026, with a response deadline of August 10, 2026, and is managed by the Department of Agriculture through its Mrpbs Minneapolis Mn office. All supplies must be delivered to Edinburg, Texas, with a zip code of 78541, establishing the primary place of performance. The contract type is defined as a subcontract, suggesting it may be part of a larger procurement structure, and the total requirement spans three annual delivery periods with consistent quantities each year.

Mrpbs Minneapolis Mn

POSTED

DEADLINE

Supply of Eco-Friendly Janitorial Consumables

Mrpbs Minneapolis Mn

POSTED

DEADLINE

Weekly Janitorial Cleaning Services – Office and Laboratory Facility

Mrpbs Minneapolis Mn

POSTED

DEADLINE

Temperature Monitoring System

Solicitation # 12639526Q0199SSN

The U.S. Department of Agriculture’s National Centers for Animal Health is seeking information from small business contractors capable of providing a comprehensive Temperature Monitoring System to oversee critical laboratory environments across its 520-acre campus. The system must support 1,150 temperature probes installed on ultra-low temperature units, refrigerators, freezers, incubators, water baths, CO2 monitors, humidity sensors, and liquid nitrogen tanks, with a cellular transmission network capable of penetrating concrete walls and reliably covering the entire facility. The contractor must also deliver system training, ongoing oversight, preventive maintenance, operational verification, testing, and calibration services post-installation. Only small businesses certified under NAICS code 334290 with fewer than 800 employees are eligible to respond; non-compliant organizations are excluded. This notice serves solely as market research under FAR Part 10, with no obligation on the government to issue a solicitation, award a contract, or reimburse any costs incurred by respondents. Responses are voluntary but may directly influence the procurement strategy, including potential small business set-asides or full and open competition. Submissions must be emailed to Jason L. Wilking by August 10, 2026, at 11 a.m. CDT, and must include company name, point of contact, SAM Unique Entity ID, and relevant system details. No questions will be entertained, and responses to this notice do not qualify any firm for future solicitations, which must be addressed separately if issued.

Mrpbs Minneapolis Mn

POSTED

DEADLINE

Intent to Sole Source: Mozart 3-D Specimen Tomosynthesis System

Solicitation # 36C24726Q0725

The Joseph Maxwell Cleland Atlanta VA Medical Center intends to sole source a Mozart 3-D Specimen Tomosynthesis System from KUB Technologies to enhance breast cancer surgery outcomes by enabling 3D imaging of breast specimens following lumpectomies or excisions. This system, known as the Mozart iQ, uses 3D specimen tomosynthesis—the current standard of care—to produce detailed X-ray images that accurately locate tumors and surgical clips, overcoming limitations of traditional 2D imaging where dense tissue can obscure critical details. The acquisition is necessary because the facility currently lacks this capability, and the system will improve diagnostic precision and surgical outcomes for veteran patients. The solicitation number for this intent to sole source is 36C24726Q0725, posted on August 4, 2026, with responses due by August 6, 2026. The procurement falls under NAICS code 334517 for medical equipment manufacturing and is managed by the 247-NETWORK Contract Office 7 under the Department of Veterans Affairs, located in Augusta, Georgia. The place of performance is the Atlanta VA Medical Center in Atlanta, Georgia, with Monica A. Reed as the primary point of contact. No set-aside provisions apply, and the intent is to proceed with a single vendor due to the unique and proprietary nature of the Mozart iQ system, which is essential for maintaining clinical standards in breast cancer care.

247-NETWORK Contract Office 7 (36C247)

POSTED

DEADLINE

in about 16 hours

Janitorial Services for National Science Laboratories (NSL) satellite laboratory in Blakely, GA

Solicitation # 12639526Q0248

The contract solicitation 12639526Q0248 seeks janitorial services for the National Science Laboratories satellite laboratory located in Blakely, Georgia, under a combined synopsis and solicitation format in accordance with FAR Part 12. This is a total small business set-aside for the North American Industry Classification System code 561720, with the small business size standard set at $22 million in annual revenue, ensuring only eligible small business concerns may respond. Quotations must be submitted by the deadline of August 10, 2026, at 4:00 p.m. EDT, with no separate written solicitation issued beyond this announcement. The acquiring agency is the Department of Agriculture, represented by the Office in Minneapolis, Minnesota, and all proposals will be evaluated by the agency from responsible sources. Performance of the required services is to be conducted entirely at the Blakely, Georgia facility, and all inquiries should be directed to Julia Lackey, the primary point of contact, via email at Julia.Lackey@usda.gov or by phone at 202-619-8577. The solicitation is publicly accessible through the SAM.gov portal and was posted on August 4, 2026. No other forms of bid submission or documentation will be accepted beyond the responses to this RFQ, and agencies are to evaluate offers based on price and vendor capability without further negotiation unless specified during award considerations.

Mrpbs Minneapolis Mn

POSTED

DEADLINE

FMS REPAIR REQUIREMENT FOR THE COUNTRY OF AUSTRALIA NIIN: 016893937 I P/N: 720200-05-00

Solicitation # N0038325Q0137

NAVSUP Weapon Systems Support (NAVSUP WSS) in Philadelphia has issued a solicitation to identify parties capable of providing repair services for a specific component, designated by NSN 5855-01-689-3937 and part number 720200-05-00, used in the F-18 aircraft. The repair requirement is intended to support Foreign Military Sales (FMS) for Australia. This procurement is conducted under the authority of FAR 6.302-1, indicating that the Government plans to negotiate with only one source, though all interested and qualified sources are encouraged to submit capability statements by 2:00 PM Eastern Time on October 30, 2025. The Government may exercise discretion in its decision to open the contract to competition, and only sources approved through the established Source Approval Request procedures will be considered without delay to the award. If a prospective contractor is not yet an approved source, they must submit a detailed package as described by the NAVSUP-WSS Source Approval Information Brochure for Repair. The contract opportunity, posted under solicitation number N0038325Q0137, is not set aside for small business or other specific categories, though it is classified as an 8(a) Sole Source under NAICS 334517. The place of performance is Fort Worth, Texas, and any questions or proposals should be directed to the primary point of contact, Hayden Young, at the provided email and phone number. Additional information and procedures for source approval can be found on the NAVSUP Weapon Systems Support Business Opportunities webpage.

Navsup Weapon Systems Support

POSTED

DEADLINE

Purple Prism Traps for Various Buprestidae (Metallic Woodborers) Beetles

Solicitation # 12639526Q0257

The U.S. Department of Agriculture, through the Animal and Plant Health Inspection Service, is soliciting Purple Prism Traps to combat the invasive Various Buprestidae (Metallic Woodborers) Beetles, whose larvae cause fatal damage to trees by feeding in the phloem and outer sapwood, leading to widespread tree mortality, public safety hazards, and severe economic consequences for forest products, agriculture, and tourism industries. These traps serve as the primary detection and monitoring tool to delineate infestation boundaries and are critical for early intervention, with the potential to save billions in potential losses. The solicitation, numbered 12639526Q0257, is issued as a Request for Quotation under FAR Part 12 as a combined synopsis/solicitation and is exclusively set aside for small businesses using the NAICS code 325320 with a size standard of 1,150 employees. The traps must be manufactured to exact technical specifications, including a durable corrugated plastic structure measuring 2 ft by 4 ft, folded into three panels with specific overlap and tab features, painted purple with precise spectral reflectance values at 421 nm, 580 nm, and 670 nm, and coated with exactly 80 grams of Tanglefoot or equivalent adhesive divided into three 26.7-gram rectangles, each protected by a release paper to prevent sticking. All units must be packed in sturdy corrugated cardboard boxes not exceeding 20 pounds, filled with cushioning material, stackable to 56 inches, and clearly labeled with manufacturer name, contract number, product name, lot number, date of manufacture, and “DO NOT CRUSH” and “FRAGILE” markings. Each shipment must include a packing slip with batch, expiration, and order details. The procurement is structured as a five-year Indefinite Delivery, Indefinite Quantity contract with an estimated order quantity of 2,000 traps per year, delivered to the USDA APHIS PPQ facility in Edinburg, Texas, under F.O.B. Destination terms that require the contractor to bear all risks and costs until physical receipt by the government. Deliveries must occur within 45 days of a delivery order, early shipments are accepted, and order limitations restrict single-item orders to no more than $40,000 and combined orders to no more than $150,000, with a minimum

Mrpbs Minneapolis Mn

POSTED

DEADLINE

Building 63 Envelope and HVAC Renovation, Coral Gables

Solicitation # 12639526Q0232

The USDA Subtropical Horticulture Research Station in Coral Gables, Florida, is undergoing a comprehensive renovation of Building 63 to address critical HVAC and building envelope issues. The facility, comprising approximately 6,000 square feet of lab and office space, suffers from excessive humidity levels exceeding 70%, caused by condensation in the existing ductwork that has resulted in water damage. The current HVAC system, consisting of a single air-cooled chiller, associated pumps, and two variable air volume air handling units, is inadequate for maintaining proper environmental controls essential for sensitive research operations. The scope of work includes the renovation of the roof, replacement and upgrade of the HVAC system, modernization of the building automation system (BAS), and replacement of the chiller, all based on detailed designs and retrocommissioning studies prepared by A&E firm Clark Nexsen. The work must be completed in accordance with stringent technical specifications spanning Divisions 00 through 26, with adherence to ASTM, UL, NFPA, ICC IBC, and other applicable national standards. All materials, including insulation, cold-formed steel framing, and plywood, must comply with specific preservation, labeling, and marking requirements to prevent corrosion, moisture damage, and ensure traceability and safety. This is a total small business set-aside under NAICS code 238220 with a solicitation deadline of August 19, 2026, and is governed by a non-trade-off evaluation process that prioritizes technical capability and past performance over price, with award going to the highest technically rated offeror whose price is determined to be fair and reasonable. Contractual requirements are extensive and include mandatory performance and payment bonds, an irrevocable letter of credit, and multiple clauses related to labor standards, safety, environmental compliance, and diversity, equity, and inclusion. Contractors must comply with Buy American requirements, report biobased product usage, and adhere to strict safety protocols including the designation of a certified Site Safety and Health Officer and Competent Persons for hazardous operations. Prohibited materials include asbestos, lead paint, mercury, PCBs, hexavalent chromium, and diisocyanates, with smoking and substance use banned within 25 feet of building entries. All work will be inspected and accepted at the project site, with final authority residing with the Government, and contractors are responsible for submitting certified test reports, operational results, and service documentation. Payment will be executed electronically through SAM.gov, and all offerors must be SAM

Mrpbs Minneapolis Mn

POSTED

DEADLINE

SPECT/CT Imaging System Supply and IntegrationThe contract calls for the supply, delivery, installation, and full integration of a SPECT/CT imaging system designed specifically for cancer theranostics, ensuring enhanced diagnostic and therapeutic capabilities in clinical settings. The system must support advanced functionalities including dosimetry calculations for precision radiation treatment planning and high-resolution imaging of metal implants, which is critical for patients with prosthetics or surgical hardware. Seamless integration with MIM Sure Plan and SmartConsole 2.0 software platforms is required to ensure compatibility with existing clinical workflows and to enable efficient data analysis, treatment visualization, and reporting. All responsibilities fall on the vendor to deliver a fully operational system that meets strict technical and performance benchmarks without disruption to ongoing patient care. The contract is classified as a subcontract under NAICS code 334517, indicating it involves the manufacturing of medical and dental instruments, and is managed by the Ibc Acq Svcs Directorate under the Department of the Interior. The solicitation was posted on August 3, 2026, with a firm response deadline of August 6, 2026, at 2:00 PM, leaving a narrow window for proposals. While no set-aside provisions or specific place of performance details are provided, the nature of the equipment implies the system will be deployed at a healthcare or research facility, likely within a federal medical or veterans’ health system. The urgency of the timeline and the technical complexity of the system suggest a high-priority procurement aimed at accelerating cancer care innovation.

Ibc Acq Svcs Directorate (00004)

POSTED

DEADLINE

in about 15 hours

Supply of Industrex Flex HR AP Digital Imaging PlatesThe contract calls for the procurement and delivery of six Industrex flex HR AP digital imaging plates, each requiring individual IUID marking in compliance with Department of Defense standards. These plates are intended for use in digital imaging systems and must be delivered with all associated data submitted to DoD-wide tracking and inventory systems to ensure full accountability and traceability. The requirement is structured as a subcontract under the NAICS code 334517, indicating the focus on photographic and photocopying equipment manufacturing. Performance of the contract is designated to occur at Aberdeen Proving Ground, Maryland, 21005, with all deliverables expected to meet exacting military specifications for durability, compatibility, and identification. The solicitation was posted on August 3, 2026, with a strict response deadline of August 10, 2026, at 3:30 PM Eastern Time, leaving bidders a limited window to submit proposals. Although no specific set-aside designation is indicated, the contract is administered by the Department of Defense through the W6QK Acc-Apg Adelphi office, underscoring its military application and the necessity of full compliance with defense acquisition protocols. All submitted items and data must adhere to DoD requirements for unique identification and electronic reporting, and failure to meet these conditions may result in rejection of the deliverables. The lack of detailed point of contact information suggests the process is handled through centralized systems, and the official UI link provides the sole portal for accessing full solicitation details.

W6QK Acc-Apg Adelphi

POSTED

DEADLINE

Supply of Industrex HPX-1+ Digital X-Ray Scanning SystemsThe contract calls for the procurement and delivery of two Industrex HPX-1+ digital x-ray scanning systems, with full integration, calibration, and adherence to Department of Defense marking and reporting standards. The systems must be configured and tested to meet DoD-specific operational and compliance requirements, ensuring seamless compatibility with existing defense infrastructure and accountability protocols. All equipment will be delivered to Aberdeen Proving Ground, Maryland, with installation and system validation completed on-site under strictly defined technical specifications. The contract is classified as a subcontract under NAICS code 334517 and was posted on August 3, 2026, with a response deadline of August 10, 2026. It is issued by the Department of Defense through the W6QK Acc-Apg Adelphi office and focuses on enhancing non-destructive inspection capabilities at the Aberdeen Proving Ground facility. Compliance with DoD documentation and asset tracking standards is mandatory throughout the delivery and implementation lifecycle, and the successful vendor must demonstrate proven experience with government-mandated systems integration, secure handling procedures, and technical support readiness.

W6QK Acc-Apg Adelphi

POSTED

DEADLINE

NOTICE OF INTENT TO SOLE SOURCE: Two (2) Industrex HP-1+ digital x-ray scanning systems & Six (6) Industrex flex HR AP digital imaging plates.

Solicitation # W911QX26QA140

The U.S. Department of Defense, through the W6QK Acc-Apg Adelphi office, intends to solely source two Industrex HPX-1+ digital x-ray scanning systems and six Industrex flex HR AP digital imaging plates under solicitation W911QX26QA140. The requirement is classified under NAICS code 334517 and is not subject to any set-aside provisions, indicating open competition limited to a single vendor due to unique technical specifications or proprietary technology. The contract will be performed at Aberdeen Proving Ground in Maryland, with all equipment delivered to meet operational needs at this military installation. The solicitation was posted on August 3, 2026, and responses must be submitted by August 10, 2026, at 3:30 p.m. Eastern Time. Primary point of contact for inquiries is William Nuamah, reachable via phone at 520-672-9609 or email at william.nuamah.civ@army.mil, and all correspondence should be directed through this official channel.

W6QK Acc-Apg Adelphi

POSTED

DEADLINE

65--SPECT/CT Imaging Device

Solicitation # 140D0426Q0778

The U.S. Department of the Interior, through the IBC ACQ SVCs Directorate, has issued a special notice for the acquisition of a SPECT/CT Imaging Device under solicitation number 140D0426Q0778. The opportunity is posted with a response deadline of August 6, 2026, at 2:00 PM Eastern Time, and corresponds to NAICS code 334517, which classifies the procurement under Medical Equipment and Supplies Manufacturing. The contract is being managed from the agency’s office located in Herndon, Virginia, with no specific place of performance designated beyond the federal location. The primary point of contact for inquiries is Patrick Jackson, reachable via email at patrick_jackson@ibc.doi.gov, though the provided phone number is listed as inactive. This procurement is not subject to any small business set-aside or similar socioeconomic restrictions, and interested parties must submit responses through the designated federal procurement platform linked in the notice.

Ibc Acq Svcs Directorate (00004)

POSTED

DEADLINE

in about 15 hours

Plumbing Repairs, Phoenix Rearing Facility

Solicitation # 12639526Q0197

The Phoenix Rearing Facility Plumbing Repairs solicitation, identified by number 12639526Q0197, is a fixed-price construction contract issued by the U.S. Department of Agriculture through its Minneapolis office, with performance located at the 69,000-square-foot facility in Phoenix, Arizona. The facility supports the Sterile Insect Technique program aimed at controlling navel orange worm populations impacting U.S. agriculture. This procurement requires comprehensive plumbing system repairs and upgrades to address chronic issues including backed-up sinks and urinals in both men’s restrooms, recurring clogs in maintenance and utility drains, and persistent odors in the QC clean lab area. The work scope includes removal and replacement of waste piping and vents with associated concrete repairs, remodeling the south restroom and showers to meet ABA compliance standards, performing minor fixture replacements and finish patching in the north restroom, and engaging a government-approved third-party inspection agency to verify all systems. The contract is set aside entirely for small businesses with a NAICS code of 238220 and a size standard of $19 million, with the offeror required to submit a lump-sum price that reflects a realistic understanding of the work and consistent technical approach. The contract imposes strict compliance with federal regulations including the Buy American Act, Construction Wage Rate Requirements under the Davis-Bacon Act, and sustainable product standards, with all materials required to be delivered in unopened manufacturer packaging with intact labels conforming to NFPA 70, ANSI A137.1, and ASME A13.1. Performance must commence within 10 days of receiving the Notice to Proceed and is governed by an 180-day period of performance. The contractor is mandated to provide performance and payment bonds, submit a site-specific safety plan, designate key personnel including a superintendent, quality control officer, and safety officer, and maintain detailed quality records including hydrostatic and welding inspections. Progress payments are available monthly and must be supported by itemized requests, subcontractor payment listings, lien waivers, and certified documentation, with payments processed within 14 days of a proper submission. Award will go to the responsible small business offering the highest technical rating with a fair and reasonable price, with no trade-offs permitted between cost and technical merit. All work must align with the 2010 ADA Standards for Accessible Design, and the contractor must certify compliance with federal anti-discrimination laws and environmental requirements, while also adhering to whistleblower protections and prohibitions against

Mrpbs Minneapolis Mn

POSTED

DEADLINE

Fire suppression system installation

Solicitation # 12639526Q0210

A fire suppression system installation is required at Building 6418 on Moore Air Base in Edinburg, Texas, following a recent fire that exposed the absence of any fire protection in the structure, which was built in the early 1980s. The project is a turnkey effort requiring the full design, installation, permitting, and commissioning of a new automatic sprinkler system including underground and overhead piping, canopy protection, flex drops for sprinkler heads centered in ceiling tiles, and a riser room with an above-ground backflow preventer, PIV, tap, and testing certification. All work must comply with NFPA standards, State of Texas environmental regulations, and local ordinances, using only new and unused materials. The system must be designed to allow for future integration with a fire alarm panel, though no active monitoring is required at this time. The solicitation is a combined synopsis and request for quotations issued under FAR Part 12 as a commercial items acquisition, with a total small business set-aside under NAICS code 238220 and a size standard of $19 million. Offers must be submitted electronically by 12:00 p.m. CT on August 6, 2026, to james.g.roloff@usda.gov with the solicitation number included in the subject line. A site visit is scheduled for July 23, 2026, and attendees must register in advance and present a valid driver's license or state ID for facility access. Award will be made using the Lowest Price Technically Acceptable (LPTA) method under FAR 12.203, where only the lowest-priced offer will be evaluated for technical acceptability unless it fails to meet requirements, in which case the process continues sequentially down the price list. The quote must include a complete breakdown of all components making up the lump-sum price, and the government will conduct a price realism analysis to ensure the submission is realistic, reflects a clear understanding of requirements, and is consistent with the technical proposal. Submissions deemed unreasonably low or high may be rejected for incorporating excessive risk. Technical acceptability is rated as acceptable or unacceptable based on the offeror’s demonstrated ability to meet all requirements, including relevant experience with fire sprinkler systems of similar scope. Past performance will be evaluated as acceptable, neutral, or unacceptable, with no history resulting in a neutral rating. All contractors must be registered in SAM, provide payment and performance bonds under FAR 52.

Mrpbs Minneapolis Mn

POSTED

DEADLINE