This Solicitation opportunity from Texas was posted on July 14, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

20 Foot Gooseneck Flatbed Trailer and 16 Foot Bumper Trailer

Closed

554-26-005State & Local

Submission Closed07/15/2026, 08:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 336212

New

SLED

Self Loading Reel Trailer

Solicitation # 27-18

The contract seeks a self-loading reel trailer capable of handling steel and wood cable or wire reels with a maximum width of 60 inches and diameter of 96 inches, and a minimum reel weight of 8,000 pounds. The trailer must be no wider than 102 inches with no length restrictions and feature hydraulic self-loading capability with both clamp style and arbor style designs submitted for comparison. Arbor sizes of 2 7/8 inches are standard, but adapter plates must be included to accommodate larger arbor sizes up to 5 inches. Both self-driving and tow-behind configurations are required, with self-driving preferred. The trailer must incorporate a 2 ½ inch or 3 inch lunette eye, an RV-style electrical connection, and a hydraulic or manual tongue jack. Hydraulic payout and take-up systems are mandatory, along with a reel brake, lug nut indicators, electric brakes with a safety breakaway system, wheel chocks and holders, and outrigger pads. A quote must be provided both with and without a level wind option. This replacement unit will supersede the existing T-09 Roose manual self-loading trailer, which has a GVW rating of 11,000 pounds, so the new trailer must meet or exceed this capacity and fully comply with all technical and operational requirements.

POSTED

DEADLINE

SERVICE BODY, CRANE, AND LIFT GATE (SUPPLY AND INSTALL)

Solicitation # 21-27

The contract is for the supply and installation of a service body, crane, and lift gate, with a solicitation number of 9cbb43fb-fd06-4759-83fb-fe15eb77714d and a response deadline of August 12, 2026, at 2:30 PM. It was posted on August 7, 2026, and is issued by Das Purchasing, the statewide bidding and contracts division under the State of New Hampshire. The work must be performed at a location determined by the agency, though specific city or zip details are not provided. The procurement is open to qualified vendors who can meet the technical and delivery requirements for the equipment and its professional installation. All submissions must be received by the stated deadline, and inquiries should be directed to Lincoln Adams, the designated buyer, via email or phone provided. There is no set-aside designation specified for this solicitation, meaning it is open to all eligible contractors regardless of business size or status. The contracting authority is a state entity focused on statewide procurement, indicating that successful bids may be utilized across multiple state departments or agencies. The point of contact for questions is Lincoln Adams, with direct phone and email information available through the solicitation portal. Vendors are expected to deliver fully functional, properly installed equipment compliant with all relevant standards and ready for immediate operational use. Details about technical specifications, warranties, or inspection criteria are not included in the metadata but will be outlined in the full solicitation documents accessible via the provided URL.

Das Purchasing (statewide Bids & Contracts)

POSTED

DEADLINE

Vehicle Fabrication & AssemblyThe contract under the title Vehicle Fabrication & Assembly requires the manufacture and assembly of power cars and trailing units in full compliance with approved designs and OEM specifications, encompassing all critical phases such as structural framing, body paneling, welding, and final assembly. Work must be performed to exacting standards ensuring safety, durability, and functional integrity, with full adherence to industry best practices and technical requirements. The effort is designated as a Small Business Set Aside under the SBA program, reserving full participation for qualified small businesses, and is classified under NAICS code 336212 for Railroad Rolling Stock Manufacturing. The opportunity was posted on August 7, 2026, with a firm response deadline of August 14, 2026, at 7:00 PM, and is administered by the General Services Administration through its Automotive Center. Performance of the contract will take place in Dinosaur, with no specific point of contact provided in the published details. The subcontract is part of a broader federal initiative to support small business participation in defense and transportation infrastructure projects, emphasizing local economic engagement and specialized manufacturing capabilities within the rail vehicle sector.

Gsa/fas Automotive Center

POSTED

DEADLINE

Custom Boat Trailer Design and FabricationThe contract requires the design and fabrication of a custom trailer compliant with Department of Transportation standards for the exclusive transport of a custom aluminum jet boat. The trailer must be equipped with functional braking and lighting systems, secure tie-down mechanisms, and a load rating sufficient to safely carry the specified vessel. Engineering and construction must adhere to all federal safety and regulatory requirements, ensuring structural integrity and operational reliability under real-world hauling conditions. The trailer must be tailored to the unique dimensions and weight characteristics of the jet boat without deviation from DOT compliance. The solicitation, titled Custom Boat Trailer Design and Fabrication, was posted on August 7, 2026, with responses due by August 14, 2026. It is classified as a subcontract under NAICS code 336212, which pertains to boat building. The contracting entity is the Office of Acquisition Grants within the Department of the Interior, though specific delivery or performance location details are not provided. Interested parties must submit proposals before the deadline, ensuring technical alignment with the specified requirements and demonstration of capacity to deliver a fully compliant, mission-ready trailer.

Office Of Acquisiton Grants

POSTED

DEADLINE

LOWBOY TRAILER FOR FWS POCOSIN LAKES NWR

Solicitation # 140FS326Q0134

The U.S. Fish and Wildlife Service, through the Department of the Interior, is seeking a lowboy trailer to support operations at the Pocosin Lakes National Wildlife Refuge under solicitation number 140FS326Q0134. This procurement is a Small Business Set Aside, fully reserved for small businesses, with the North American Industry Classification System code 336212 for motor vehicle body manufacturing. The solicitation was posted on August 7, 2026, with responses due by August 13, 2026, at 9:00 p.m. Eastern Time. The trailer is intended for use at the Pocosin Lakes NWR, though the exact delivery location details are unspecified in the provided data, and the contract will be managed by the FWS Sat Team 3 based in Falls Church, Virginia, with a mailing address of 22041. Chantal Bashizi serves as the primary point of contact for this solicitation and can be reached via email at chantal_bashizi@ios.doi.gov or by phone at 703-358-1854. Interested parties must submit proposals through the SAM.gov platform using the provided UI link. The acquisition is being conducted under the authority of the Department of the Interior, and all bidders are expected to comply with federal contracting standards and small business eligibility requirements. No additional performance or delivery location specifications are listed beyond the reference to Pocosin Lakes NWR.

POSTED

DEADLINE

Solicitation # W911S226U3970

A 42-foot custom-built Mobile Command Center trailer is being procured to serve as a mobile incident command post for military and law enforcement agencies during large-scale emergencies. The trailer must meet stringent structural and operational standards, including a heavy-duty 5th-wheel or gooseneck hitch, two flat-floor slide-outs, and a four-point automatic hydraulic leveling system. Externally, it must not exceed 12 feet 6 inches in height to ensure highway clearance, and it must be equipped with a motorized awning covering a recessed, weatherproof 49- to 55-inch exterior monitor that is daylight-readable with minimum 1000 nits brightness and housed in a lockable, gas-shock-assisted compartment with articulating mount and interior lighting. Full custom vinyl graphics with Department of War/Garrison FES branding and reflective striping are required and subject to government approval. Internally, the trailer is divided into a Main Operations Area and a secure Conference Area separated by a sound-deadening door, with no kitchenette or lavatory included. It must feature six dedicated workstations, one specifically configured as a dispatch console, supported by heavy-duty commercial-grade desks and aluminum or high-pressure laminate cabinetry. Two large magnetic whiteboards, one in each zone, are required. Climate control consists of three 15,000 BTU roof-mounted HVAC units with heat pumps capable of maintaining 70°F interior temperature in ambient conditions up to 110°F, and the ceiling must provide a minimum interior height of 80 inches. Power is supplied by a 20kW diesel generator with remote start and a custom fuel cell, backed by a double-conversion online UPS rated for at least 3,000VA and 2,700 watts, capable of sustaining critical communications equipment for 30 minutes during power transitions. A 19-inch EIA equipment rack with at least 16U of usable space and 25-inch depth must be securely mounted and cooled, housing network equipment, radios, and the UPS with front/rear adjustable rails and rear cable management. The trailer is pre-wired with CAT6 ethernet drops at all workstations, and six roof-mounted NMO antenna bases are installed at least three feet apart and connected via low-loss coaxial cable to the rack, with integrated copper grounding. A heavy-duty shore power connection with a 50-foot umbilical cord and a full emergency lighting package of eight high-l

POSTED

DEADLINE

Solicitation # W911S226U3963

The contract pertains to the procurement of a custom-modified 2026 SCOTTY Safety Theater 35-Sprinkler trailer designed for live-fire training and demonstration purposes. The unit features a robust tubular steel frame, gelcoat white fiberglass exterior, and a commercial rubber roof with a 12-year warranty. It includes large Lexan viewing windows for safe observation, upgraded electric stabilizing jacks and an electric hitch jack, and requires vendor verification for towing specifications including axle count, tire size, and GVWR. The trailer is equipped with a 50-amp power system, an 80-amp integrated power converter, and a Honda EU7000is generator mounted on the hitch with a soft cover. Climate control is managed by two 13,500 BTU Dometic AC units with heat pumps and two 4,266 BTU electric ceiling heaters, complemented by a high-volume ventilation system and GFI-protected 110v outlets throughout. Inside, the trailer features urban-chic interior finishes certified under the GREENGUARD Children and Schools Program, immersive lighting with black lights and stage lighting, and a surround sound system with integrated WIFI and a rack-mounted computer system. An exterior 55-inch LED touch screen monitor with a locking roll-up door enhances public demonstration capabilities. The live-fire burn room has aluminum diamond tread walls, galvanized steel heat shielding, a 20-gallon water tank feeding a 135-degree sprinkler head, and a 1/2 hp pump connected via PEX and copper piping, with sloped floors leading to an exterior drain. The kitchen module includes a simulated flame trash can prop that uses light and airflow without smoke. Safety systems include smoke alarms with strobes for the hearing impaired, two carbon monoxide detectors, a pull station with horn and master cut-off, and a foldable wheelchair ramp with on-board storage though it does not meet standard ADA slope requirements. An 8 ft. by 21 ft. electric rollout awning is included, and the unit comes with a standard exterior graphics package plus an option for a complete custom full-wrap visual graphic. The solicitation number is W911S226U3963, issued by the Department of Defense at Fort Drum, NY, with a response deadline of August 12, 2026.

POSTED

DEADLINE

Enclosed Gooseneck Cargo Trailer Manufacturing or SupplyA 32-foot enclosed gooseneck cargo trailer is being procured for manufacture or supply with model year designations of 2025 or 2026, requiring strict compliance with specified construction standards, insulation properties, safety features, and the integration of an E-track loading system. The trailer must be built to endure heavy-duty use and delivered to Tahlequah, Oklahoma, with all technical and performance criteria fulfilled prior to acceptance. The opportunity is classified as a subcontract under NAICS code 336212 and is managed by the Cherokee Nation, with responses due by August 12, 2026, following a posting date of August 7, 2026. There is no set-aside designation mentioned, and the procurement is open to qualified contractors capable of meeting all outlined specifications without deviation.

POSTED

DEADLINE

Trailer Component Integration and Final Assembly

POSTED

DEADLINE

Supply and Delivery of New 28 ft Tandem Axle Trailer

POSTED

DEADLINE

Enclosed Trailer Fabrication and Assembly

Department of National Defence

POSTED

DEADLINE

Solicitation # 5400030060

The contract solicitation titled STC FOR TRUCK BODIES is issued by the State Fiscal Accountability Authority of South Carolina under solicitation number 5400030060, posted on August 7, 2026, with a response deadline of September 21, 2026, at 3:00 PM Eastern Time. This solicitation is categorized as a state, local, or educational government procurement and is intended for the procurement of truck bodies, with performance expected to occur within South Carolina. The sole point of contact for inquiries is Michael Speakmon, reachable via email at mspeakmon@mmo.sc.gov. The solicitation is hosted on the South Carolina Business Opportunities portal, where full details and submission requirements can be accessed through the provided uiLink. No specific set-aside designation or NAICS code is listed, indicating the procurement may be open to all qualified respondents without demographic or small business preferences.

State Fiscal Accountability Authority

POSTED

1 day ago

DEADLINE

in about 1 month

AI Contract Overview

The Texas Animal Health Commission is seeking bids for two 20 Foot Gooseneck Flatbed Trailers and two 16 Foot Bumper Pull Trailers under solicitation number 554-26-005, which was posted on June 22, 2026, with a response deadline of July 15, 2026, at 8:00 PM CT. This solicitation is issued by a state-level government agency under the SLED classification and does not specify a set-aside type or NAICS code. All trailers are intended for use within Texas, and performance is expected to occur within the state. Robert Walker of the Texas Animal Health Commission serves as the primary point of contact, reachable via phone at 512-719-0700 or email at Robert.Walker@tahc.texas.gov. Further details and submission instructions are available through the official Texas SmartBuy portal linked in the solicitation.

General Info

Texas Animal Health Commission seeks bids for four trailers, deadline July 15, 2026, for state use.

Agency

Texas Animal Health Commission

NAICS

336212 - Truck Trailer ManufacturingView NAICS

Place of Performance

TX, US

Set-Aside

NONE

Documents

(4)

IFB 554-26-005 Addendum 1 - Questions and Answers

PDF•amendment

Texas Animal Health Commission IFB 554-26-005 Attachment A Info and Certifications Form

PDF•information-and-certifications-form

IFB 554-26-005 Texas Animal Health Commission Trailers

PDF•ifb

IFB 554-26-005 Terms and Conditions for Trailers

PDF•terms-and-conditions

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedJul 14

Solicitation

Response DeadlineJul 15

Deadline has passed

Submission Closed

07/15/2026, 08:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyTexas Animal Health Commission

Contacts1 person available

OfficeTX, US

Organization / Agency

Texas Animal Health Commission

Office AddressTX, US

Contacts

Robert Walker

contact@example.gov

+1 (555) 000-0000

Full Description

The TAHC is soliciting for two (2) 20 Foot Gooseneck Flatbed Trailers and two (2) 16 Foot Bumper Pull Trailers