This Solicitation opportunity from New York was posted on June 14, 2024. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

2024 Landfill Gas System Improvements and Dewatering

Closed

RFB 24-27State & Local

Submission Closed07/11/2024

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

Solicitation # SPE7M1-27-T-2508

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

FILTER BODY, INTAKE AIR

Solicitation # SPE7M1-27-T-2506

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Air Pump Equipment SupplierThis subcontract involves the supply of industrial or agricultural air pumps to prime contractors supporting FAO supply contracts for the Jahally Training Center in Gambia. The selected supplier is responsible for manufacturing or sourcing equipment that meets specific technical requirements, conducting rigorous quality assurance testing, and ensuring all units are properly packaged for international transit. Strict adherence to international electrical and safety standards is mandatory for all delivered equipment. The scope of work concludes with the successful delivery of the completed air pump units to the designated location in Gambia under NAICS code 333912.

POSTED

DEADLINE

Air pump and accessories [email hidden]

Solicitation # 2026/FRGAM/FRGAM/138940

The Food and Agriculture Organization of the United Nations (FAO) is soliciting offers for the procurement of air pumps and accessories to be delivered to the Jahally Training Center in Gambia. This solicitation, identified by number 2026/FRGAM/FRGAM/138940, requires interested bidders to maintain at least a UNGM Basic Registration with the FAO to be eligible for participation. All bids must be submitted exclusively through the UNGM portal to be considered valid, as any offers sent via other channels will be invalidated. The submission process requires the completion of a mandatory questionnaire, specifically addressing all yellow-highlighted fields, and the upload of separate technical and financial offers into designated envelopes. To ensure a successful submission, bidders must avoid using special characters in filenames and are advised to keep file sizes under 5MB to prevent document corruption. All communications and clarification inquiries regarding this tender must be managed through the correspondence tab of the UNGM portal.

POSTED

DEADLINE

SEAL ASSEMBLY, SHAFT, SP

Solicitation # SPE7M1-27-T-2462

This solicitation, issued by the DLA Weapons Support Maritime Supply Chain, is for the procurement of 863 spring-loaded shaft seal assemblies under NSN 4320-01-726-2987. The requirement specifies a need ship date of June 17, 2027, with a delivery timeframe of 209 days after order. The contract is a total small business set-aside under NAICS code 333912, with delivery and inspection points both set at the destination, specifically DLA Distribution San Joaquin in Tracy, California. Technical compliance is governed by the DLA Master List of Technical and Quality Requirements, with specific adherence to basic drawing 53711 and revision A. Packaging and marking must strictly follow MIL-STD-2073-1E and MIL-STD-129, with palletization meeting RP001 requirements. Key regulatory clauses include the Buy American and Balance of Payments Program, destination inspection under FAR 52.246-2, and mandatory cybersecurity reporting per DFARS 252.204-7012. All payment requests and receiving reports must be processed electronically through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE7M1-27-T-2458

Solicitation SPE7M1-27-T-2458 is a Request for Quotations issued by the DLA Weapons Support Maritime Supply Chain for the procurement of 30 compressor pistons, identified by NSN 4310-01-343-0889. This is a total small business set-aside under FAR 19.5, with a required delivery date of June 8, 2029, and a need ship date of June 28, 2024. The contract specifies FOB Origin terms with inspection and acceptance occurring at the destination, specifically the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The procurement is subject to strict technical and quality requirements, including DLA Master List standards and configuration change management protocols. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, with specific prohibitions against the intentional addition of mercury or the use of Class I ozone-depleting chemicals. The contract incorporates several key regulatory clauses, including the Buy American and Balance of Payments Program, safeguarding of covered defense information, and prohibitions on covered defense telecommunications equipment. Payment and receiving reports must be processed electronically through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

PARTS KIT, COMPRESSOR

Solicitation # SPE7M1-27-T-2465

Solicitation SPE7M1-27-T-2465 is a small business set-aside procurement issued by the DLA Weapons Support Maritime Supply Chain for the acquisition of three compressor parts kits, identified by NSN 4310-01-480-5790 and Sauer Compressors USA, Inc. part number 085 153. The contract is executed under the First Destination Transportation program with delivery terms set as FOB Origin. The required delivery date is September 19, 2027, with a delivery window of 165 days after order. The destination for delivery, inspection, and acceptance is DLA Distribution San Diego, California. The contractor must adhere to strict packaging and marking standards, including MIL-STD-2073-1E for kits and MIL-STD-129 for shipment marking. Technical and quality requirements are governed by the DLA Master List, and specific restrictions prohibit the intentional addition of mercury or mercury-containing compounds to the hardware. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and compliance with various FAR and DFARS clauses regarding cybersecurity, safeguarding covered defense information, and the prohibition of covered defense telecommunications equipment.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

CYLINDER HEAD, COMPRESS

Solicitation # SPE7M0-27-T-1129

Solicitation SPE7M0-27-T-1129 is a fixed-price procurement issued by the DLA Weapons Support Maritime Supply Chain ESOC Buys for one cylinder head compressor, identified by NSN 4310015938397 and part number XM2-D2391. The contract requires delivery within five days after order, with an original required delivery date of October 30, 2026. Shipping is designated as FOB Origin, and both inspection and acceptance will occur at the destination. The item is classified as a critical application item and must be delivered to a specific SSA facility in Kaiserslautern, Germany. The contractor must adhere to strict packaging and safety standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and IP042 for oxygen clean requirements. Special mandates include the prohibition of intentionally added mercury and strict containment requirements per NAVSEA 5100-003D. Legal and regulatory compliance is required under various FAR and DFARS clauses, including the Buy American Act, safeguarding covered defense information, and the use of the Wide Area Workflow system for electronic invoicing and payment.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Supply of Rotary Screw Air CompressorsThis subcontract involves the supply of four to five fully configured Ingersoll Rand RS110iE Rotary Screw Air Compressors for prime contractors working on USACE Rock Island District projects. The required units are 110KW, 125 PSIG fixed speed oil lubricated compressors equipped with 150HP TEFC motors and XS-180E controls. To ensure operational viability in various environments, the equipment must include outdoor modifications for enclosures and air intake, as well as low ambient capability down to -20F. Compliance and quality standards are strictly defined, requiring the inclusion of CAGI Verification Decals and adherence to UID compliance per ISO/IEC 16022. The contract is managed under the Department of Defense through the W07V Endist Rock Island agency, with the place of performance located in Pleasant Valley. All delivered units must be fully functional and meet the specific technical configurations outlined for the project.

W07V Endist Rock Island

POSTED

DEADLINE

Mississippi River Project Office - Ingersoll Rand RS110iE Rotary Screw Air Compressors (Brand Name Only

Solicitation # W912EK27QA005

The U.S. Army Corps of Engineers, Rock Island District, is soliciting quotes for the procurement of four new Ingersoll Rand RS110iE Rotary Screw Air Compressors for the Mississippi River Project Office in Pleasant Valley, Iowa. The requirement includes a base order of four units and an option for a fifth compressor. These specific 110KW, 125 PSIG fixed-speed oil-lubricated compressors must feature two-stage 150HP TEFC motors, space heaters, RTDs, base containment, and ultra food-grade coolant. Each unit must include a CAGI Verification Decal and a five-year manufacturer warranty. The contract is an unrestricted commercial product procurement with a delivery deadline of April 5, 2027, and a requirement that all units be delivered within 22 weeks of the award date. Delivery is FOB Destination, with the contractor responsible for transportation costs. Strict marking requirements are in place, necessitating unique item identifiers compliant with ISO/IEC International Standard 16022 for items meeting specific cost or warranty thresholds. Payment will be processed electronically via the Wide Area WorkFlow system. Quotes are due by November 13, 2026, and offerors must maintain an active registration in the System for Award Management.

W07V Endist Rock Island

POSTED

DEADLINE

Solicitation # UA-2026-11-07-000483-a

This solicitation, issued by Military Unit A1586 under the Government of Ukraine, seeks the procurement of a compressor block intended to restore the functionality of a plasma cutting machine. The procurement process is identified by solicitation number UA-2026-11-07-000483-a and is managed by the primary point of contact, Oleksandr Tonkonoh. The opportunity was posted on November 7, 2026, with a response deadline set for November 17, 2026. The contracting office is located in the Zhytomyr region of Ukraine, and the performance of the contract will take place within the country.

Військова частина А1586

POSTED

DEADLINE

WY Fremont Canyon Portable Air CompressorThe Bureau of Reclamation, under the Department of the Interior, has issued a forecast for the procurement of a new portable air compressor to be utilized at the Fremont Canyon Power plant within the Missouri Basin. This requirement is categorized under NAICS code 333912, which pertains to the manufacturing of other industrial machinery and equipment. The forecast was posted on November 6, 2026, and is currently managed by Jennalyn Kent, who serves as both the primary point of contact and the Small Business Specialist for this acquisition. Further details regarding the solicitation and specific performance requirements can be accessed through the Acquisition Gateway.

Bureau of Reclamation

POSTED

3 days ago

DEADLINE

N/A

AI Contract Overview

The contract involves a comprehensive project at the Madison County Landfill in New York, focusing on enhancing the landfill gas management system. The scope includes drilling and installing 11 new vertical extraction wells along with associated vacuum and dewatering infrastructure. Additionally, the project entails supplying and installing 18 new landfill gas dewatering pumps, installing air and condensate conveyance piping, and setting up a new air compressor station to support the system's operation. The contract is scheduled to run from August 15, 2024, to April 1, 2025, with a bid submission deadline of July 11, 2024. The project size is estimated between $500,000 and $1,500,000, and it is open to qualified bidders, although it is not set aside specifically for service-disabled veteran-owned businesses. The procurement is managed by Madison County, and interested parties can contact Laurie Winters, the Purchasing Agent, for further details. This project aims to improve the landfill’s gas extraction and dewatering capabilities to ensure environmental compliance and operational efficiency.

General Info

Agency

New York → Madison County

NAICS

333912 - Air and Gas Compressor Manufacturing

Place of Performance

NY, USA

Set-Aside

NONE

Documents

rfb

High

rfb

High

rfb

High

rfb

High

wage-determination

High

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedJun 14

Solicitation

Response DeadlineJul 11

Deadline has passed

Submission Closed

07/11/2024

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyNew York → Madison County

Contacts1 person available

OfficeN/A

Organization / AgencyNew York → Madison County

Office AddressN/A

Contacts

Laurie WintersPurchasing Agent

contact@example.gov

+1 (555) 000-0000

Full Description

Project will consist of drilling and installing 11 new vertical extraction wells with associated vacuum and dewatering infrastructure, supply and installation of 18 new LFG dewatering pumps, and installation of air and condensate conveyance piping, and a new air compressor station. Service-Disabled Veteran-Owned Set Aside: No Due date:07/11/2024 9:00 AM Bids are publicly opened & read at the time and day the bids are schedule to be received. Contract term: 8/15/24 - 4/1/25 County(ies): Madison Location: Madison County Landfill Business entities awarded an identical or substantially similar procurement contract within the past five years: None