Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

26-0081-2 SR 204 Safety & Operational Improvements - Phase I

Active
PE-77548-NONST-2027-000000395State & Local

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Chatham County is seeking qualified engineering firms to provide design consultant services for the State Route 204 Safety and Operational Improvements project, spanning the segment from SR 25/US 17 to King George Blvd. The solicitation, identified as PE-77548-NONST-2027-000000395, follows a Quality-Based Selection process, emphasizing the technical expertise and qualifications of proposers over cost in the evaluation. The project aims to enhance safety and operational efficiency along this corridor and requires comprehensive engineering design services during Phase I. Proposals must be submitted by August 14, 2026, through the Georgia Department of Administration’s procurement portal, and only firms demonstrating proven capability in transportation engineering, infrastructure design, and experience with similar state highway projects will be considered. The solicitation is managed by Chatham County in Georgia, with Sabrina Tippett serving as the primary point of contact and can be reached via email at stippet@chathamcounty.org. The project falls under a State, Local, or Education (SLED) governmental entity and does not specify a NAICS code or set-aside status. All performance will occur within the state of Georgia, and interested firms are directed to the official procurement website for detailed instructions and submission guidelines. The county prioritizes selecting a firm capable of delivering high-quality, innovative engineering solutions aligned with state transportation standards and community safety objectives.

General Info

Chatham County seeks qualified engineering firms for SR 204 safety improvements via quality-based selection, proposals due August 14, 2026.

Agency

Georgia → Chatham CountyView Agency

NAICS

541330 - Engineering ServicesView NAICS

Place of Performance

GA, USA

Set-Aside

NONE

Documents

(2)

Federal Requirements Special Provisions for Procurement 7_9_2024

PDFspecial-notice

RFQ 26-0081-2 SR 204 Safety & Operational Improvements Phase I

PDFrfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyGeorgia → Chatham County
Contacts1 person available
OfficeN/A
Organization / Agency
Georgia → Chatham County
View Agency Profile
Office AddressN/A
Contacts
Sabrina Tippett

Full Description

Show more
Chatham County is soliciting Statement of Qualifications (SOQs) from qualified engineering firm(s) to provide Engineering Design Consultant Services for the State Route 204 Safety & Operational Improvements from SR 25/US 17 to King George Blvd. The County presents this "Request for Proposals - Quality Based Selection" (QBS) to describe its needs and those criteria which will be used to determine selection of services.

Similar Contracts

Same NAICS industry code

NAICS: 541330
New
Corydon Well Replacement (C2305)
Solicitation # C2305
Ardurra Group, Inc. is soliciting proposals for the Corydon Well Replacement Project on behalf of the Elsinore Valley Municipal Water District in California. This professional services agreement involves the design, bidding support, and engineering oversight for a new municipal groundwater production well to replace and abandon the existing Corydon well. The project is divided into two phases: Phase 1 focuses on technical specifications, civil site design, bidding assistance, and on-site construction management, while Phase 2 covers the architectural, civil, mechanical, structural, electrical, and instrumentation design for equipping and commissioning the well. Key technical requirements include the use of 24-inch diameter stainless steel Ful-Flo louvered well screens and compliance with AWWA, SWRCB-DDW, and DWR standards. The total estimated project cost is 2,260,788 dollars, which includes 2,000,000 dollars for construction. Award selection is based on demonstrated competence and professional qualifications rather than lowest cost, with evaluation weighted toward relevant experience (25%), project approach (25%), and scope and schedule (20%). The solicitation is specifically seeking DBE firms and is set aside for small and disadvantaged businesses. Proposals must be submitted via the PlanetBids portal by September 1, 2026. The contract is subject to stringent federal and state regulations, including Build America Buy America Act requirements, the Iran Contracting Act, and various non-discrimination and environmental mandates. Payment is managed exclusively through the Department of Treasury Automated Standard Application for Payments system.
Ardurra Group, Inc.

POSTED

about 4 hours ago

DEADLINE

in 19 days
View Details
NAICS: 541330
New
Federal
AdvM Call for Solutions - Modern Radar Systems Organic Capability Development
Solicitation # PANRSA-26-P-0000-039852
The Army Contracting Command – Redstone Arsenal is seeking a turn-key solution to establish a state-of-the-art organic depot capability at Tobyhanna Army Depot for the testing, calibration, repair, and overhaul of four critical modern radar systems: the AN/MPQ-64A4, AN/TPY-4, AN/TPQ-53, and Advanced Range Threat Simulator - Variant 3. This initiative addresses a significant capability gap in the Organic Industrial Base by eliminating dependence on Original Equipment Manufacturers and enabling comprehensive, in-house sustainment of these high-density, technically complex platforms. The solution must include integrated near-field and far-field test ranges, specialized anechoic chambers, diagnostic hardware and software, and modular infrastructure designed not only to support the four specified systems but also to scale effortlessly for future radar platforms without major reconfiguration. The vendor is responsible for the complete lifecycle of the project, including site planning, procurement, logistics, installation, validation testing, commissioning, and hands-on training for depot personnel, ensuring full operational readiness upon delivery. Offerors must present a solution adhering to Modular Open Systems Approach principles, with technical requirements broken down by each radar platform within each major capability element to allow for flexible proposal submission—whether covering the full scope or specific components. The evaluation process is structured in phases, prioritizing technical merit, modularity, scalability, and integration approach over cost in the initial evaluation, with price considered only in later stages, reflecting a best-value trade-off selection method rather than a lowest-price technically acceptable approach. The final contract may be awarded as a Firm-Fixed-Price instrument or an Other Transaction Agreement, contingent on the offeror’s size and capability structure. All deliverables must be performed at Tobyhanna Army Depot, with compliance required to ISO/IEC 17025 for NIST-traceable calibration, ANSI/ESD S20.20 for electrostatic discharge control, and Army AT/OPSEC standards, while ensuring all software is delivered with perpetual offline licenses. Proposals for Phase 1 are limited to five pages or fifteen slides and must include a Unique Entity ID, CAGE code, small business status representation, and any disclosed organizational conflict of interest with a mitigation plan. The solicitation closes on July 28, 2026, and winners will be expected to deliver a fully operational, long-term sustainable capability that ensures enduring readiness across the Army’s modern radar fleet.
W6QK Acc-Rsa

POSTED

about 8 hours ago

DEADLINE

in 1 day
View Details
NAICS: 541330
New
Federal
$625M USACE SPD Vertical AE Design MATOC
Solicitation # W9123826RA008
The U.S. Army Corps of Engineers, South Pacific Division through the Sacramento District, plans to establish a Multiple Award Task Order Contract (MATOC) with a total ceiling of $625 million for vertical architectural and engineering services across a broad area encompassing California, Arizona, Nevada, Utah, New Mexico, and portions of Colorado, Oregon, Idaho, Wyoming, and Texas. This contract will be structured as an Indefinite Delivery Contract with two distinct pools: an Unrestricted pool expected to include six to ten firms and a Small Business Reserve pool targeting four to six qualified small businesses. The primary focus is on vertical design services for military facilities, interagency and international projects, and limited civil works, covering the full spectrum from pre-design planning and site investigations through full design development and construction phase support like engineering during construction and materials testing. Projects will include new construction, facility modernization, historic preservation, sustainable design, and utility system upgrades, all governed by Department of Defense and USACE standards with an emphasis on LEED principles and multi-discipline coordination. The procurement will follow Brooks Act procedures under FAR Part 36, selecting firms based solely on demonstrated technical competence and qualifications as documented in SF-330 submissions, not on price at the contract award stage. Task orders under the MATOC will be competitively awarded to individual contractors based on their qualifications to perform specific工作任务. The contract will have a five-year base ordering period with firm-fixed-price task orders, and successful performance requires proven experience managing complex, concurrent projects across a vast geographic region. The solicitation is anticipated to be issued in February 2026, with award expected in the first quarter of fiscal year 2027, though all details are subject to change and this notice serves only as a planning tool—not a formal invitation to bid. Interested parties must monitor SAM.gov for the official solicitation and are advised that no costs incurred in response to this presolicitation will be reimbursed.
W075 Endist Sacramento

POSTED

about 8 hours ago

DEADLINE

in about 2 months
View Details

More opportunities from Georgia → Chatham County

Same awarding agency

NAICS: 541330
SLED
26-0088-2 Design Engineering Consultant for Wahlstrom/Forbes Pavement & Drainage Reconstruction
Solicitation # PE-77548-NONST-2027-000000401
Chatham County is soliciting proposals from qualified consulting firms to provide professional engineering services for pavement and drainage improvements along Wahlstrom Road and Forbes Road, aiming to resolve existing drainage issues and enhance the structural integrity of the roadway. The project requires a comprehensive evaluation of the current pavement conditions and the development of targeted recommendations for resurfacing and structural upgrades capable of supporting the high volume of heavy truck traffic alongside regular passenger vehicles. The selected firm must assess existing infrastructure, identify deficiencies, and propose durable solutions that extend the service life of the roads while improving overall performance and safety. The solicitation, titled Design Engineering Consultant for Wahlstrom/Forbes Pavement & Drainage Reconstruction with number PE-77548-NONST-2027-000000401, was posted on August 6, 2026, with a response deadline of September 8, 2026. The work is to be performed within Chatham County, Georgia, and the procurement is conducted under the state’s SLED agency framework. Interested firms should submit their proposals by the stated deadline, with all inquiries directed to Sabrina Tippett at stippet@chathamcounty.org. The opportunity is open to qualified vendors with demonstrated expertise in roadway design, pavement analysis, and drainage system engineering.
Engineering Services

POSTED

7 days ago

DEADLINE

in 26 days
View Details