Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

28--HARNESS ASSEMBLY

Active

SPE4A526T335RFederal

Response Deadline08/14/2026, 12:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract solicitation seeks a single harness assembly with NSN 2835012050728, requiring a quantity of 14 units to be delivered to W1A8 DLA DISTRIBUTION within 169 days after contract award. The approved source for this item is identified as vendor 63005 with part number 23007027, and only electronic quotes will be accepted. This is a full and open competition under RFQ SPE4A526T335R, with no set-aside restrictions, allowing all responsible sources to submit responses provided they meet the deadline. The solicitation is not available in hard copy; all information must be accessed electronically through the provided SAM.gov link, and no technical specifications, plans, or drawings are provided to offerors. The procurement falls under NAICS code 333611 and is managed by DLA Aviation under the Department of Defense, with inquiries directed to the designated point of contact via email. The solicitation was posted on August 6, 2026, and responses are due by August 14, 2026.

General Info

14 harness assemblies NSN 2835012050728 due in 169 days from vendor 63005 via SAM.gov only.

Agency

Department Of Defense → DLA AviationView Agency

NAICS

333611 - Turbine and Turbine Generator Set Units ManufacturingView NAICS

Place of Performance

VA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseCombined Synopsis

PostedAug 6

Combined Synopsis

Response DeadlineAug 14

Submission deadline

Response Deadline

08/14/2026, 12:00:00 PM UTCin 7 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA Aviation

Contacts1 person available

OfficeRICHMOND, VA, 23237, USA

Organization / Agency

Department Of Defense → DLA Aviation

View Agency Profile

Office AddressRICHMOND, VA, 23237, USA

Contacts

contact@example.gov

Full Description

Show more

Proposed procurement for NSN 2835012050728 HARNESS ASSEMBLY: Line 0001 Qty 14 UI EA Deliver To: W1A8 DLA DISTRIBUTION By: 0169 DAYS ADO Approved source is 63005 23007027. The solicitation is an RFQ and will be available at the link provided in this notice. Hard copies of this solicitation are not available. Specifications, plans, or drawings are not available. All responsible sources may submit a quote which, if timely received, shall be considered. Quotes must be submitted electronically.

Similar Contracts

Same NAICS industry code

61--Hydraulic Turbine Runner for Units A2 and N7 for H

Solicitation # 140R3026R0016

The contract solicitation 140R3026R0016 issued by the Bureau of Reclamation, Lower Colorado Regional Office in Boulder City, Nevada, seeks a contractor to furnish and install hydraulic turbine runners for Units A2 and N7 at Hoover Dam, with a period of performance spanning from December 15, 2026, to December 14, 2028. The scope of work encompasses the complete design, manufacturing, and delivery of two new turbine runners along with associated components including stationary wear rings, coupling nuts and washers, in-place machining services, air admission piping, and all required drawings, bonds, and mobilization activities. Detailed specifications, 48 pages of technical specifications, and 14 pages of engineering drawings mandate strict adherence to ASME standards including B46.1-2019, BPVC-2025, Y14.1-2020, and Y14.5-2018, with manufacturing required to use ASTM A743 Grade CF-3 material and undergo rigorous non-destructive testing protocols per ASTM A802, A903, and other relevant criteria. All components must meet exact dimensional tolerances, and any casting with more than five defects failing acceptance criteria will be rejected in its entirety. The contract imposes comprehensive compliance requirements under the Federal Acquisition Regulation, including ethical conduct provisions such as prohibitions on gratuities, contingent fees, kickbacks, and improper influence, along with mandatory adherence to a contractor code of business ethics. Offerors must submit proposals electronically by August 10, 2026, to Virginia Toledo via email, structured in three volumes covering administrative, technical, and pricing elements, with full completion of Section G.4 personnel data and submission of a detailed subcontracting plan. Payment requests must be submitted through the Treasury’s IPP system with strict formatting rules and exclusion of personally identifiable information, and the final invoice must be clearly labeled. The contractor is responsible for ensuring all employees comply with federal security protocols at Hoover Dam, including possession of government-issued identification, and must safeguard all controlled unclassified information under Reclamation Directive SLE 02-01. Prevailing wage rates apply, Buy American Act requirements govern materials, and performance and payment bonds are mandatory. Award is contingent upon meeting all solicitation terms, demonstrating responsibility under FAR Part 9, and having a fair and reasonable price, with no weighted evaluation factors specified beyond these

Lower Colorado Regional Office

POSTED

about 22 hours ago

DEADLINE

61--CONTROL,GENERATOR, IN REPAIR/MODIFICATION OF

Solicitation # N0038326QHA67

The contract pertains to the procurement of one unit of a generator control component, identified by NSN 7R-6110-014522467-KB, under a sole-source acquisition authorized under FAR 6.302-1 due to the item’s flight-critical nature and insufficient technical data to support full and open competition. Delivery is FOB origin, with early and incremental deliveries accepted, and all contractual documents are deemed officially issued upon electronic transmission or mailing. Only previously approved sources may respond, as the item requires specialized engineering knowledge, unique manufacturing capabilities, and proprietary technical data that are not commercially available to the Government, making qualification of alternative sources impractical within the procurement timeline. Prospective offerors not already approved must submit complete source approval documentation from the NAVSUP Weapon Systems Support brochures, detailing their experience with the same or similar items, or provide proof of a pending approval request; failure to comply will result in proposal rejection. The Government retains full discretion to award based on fleet support needs if source approval cannot be finalized in time. Solicitation responses are due by September 21, 2026, and while the procurement is not competitive by intent, all interested parties may submit capability statements within 45 days for consideration, though no competition is anticipated. Technical specifications and standards referenced are obtainable through ASSIST-Online or DODSSP, but critical engineering data such as drawings and deviation lists are not available through these channels. The contracting officer may consider proposals based on commercial items submitted within 15 days of notice, though the acquisition is not being conducted under FAR Part 12 policies.

Navsup Weapon Systems Support

POSTED

about 22 hours ago

DEADLINE

in about 1 month

28--FILTER SYSTEM,AUXIL

Solicitation # SPE4A626Q0563

The U.S. Department of Defense, through DLA Aviation, is seeking quotes for 15 units of the auxiliary filter system with NSN 2835015360539 under solicitation SPE4A626Q0563, which is a Small Business Set Aside for total award. The requirement is to deliver the items to DLA Distribution Cherry Point with a delivery deadline of 207 days after award, and only approved sources, identified as 0GCA0 104002-101 and 78286 70070-30316-011, are eligible. The solicitation is issued as an RFQ with no hard copies available; all submissions must be electronic and received by the deadline of August 14, 2026. No specifications, plans, or drawings are provided, and all responsible sources may respond provided their quotes are submitted on time. The NAICS code is 333611, and the point of contact for questions is listed as DibbsBSM@dla.mil, with additional information accessible via the SAM.gov link provided. The office managing this procurement is located in Richmond, Virginia.

POSTED

about 22 hours ago

DEADLINE

BAFFLE, AIRFLOW, NONA

Solicitation # SPE4A6-26-T-13VT

The contract pertains to the procurement of 25 units of the Baffle, Airflow, NONA with NSN 2835-01-674-5028 under solicitation SPE4A6-26-T-13VT, with a delivery requirement of 177 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with specific references to RP001, RQ011, RQ017, RQ006, RQ009, RQ001, and RQ032, which establish packaging standards, identification marking protocols, inspection procedures, and tailored quality controls applicable to both manufacturers and non-manufacturers. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and attributes are to be verified at designated levels or AQLs. Certificate of Conformance and Certificate of Quality Compliance documentation is mandatory, and contractors must comply with CDRL requirements as outlined in the Technical Data Package. The item is subject to strict export control under ITAR or EAR regulations, with technical data classified as restricted and prohibited from dissemination to foreign persons without prior authorization from the Department of State or Commerce. DFARS 252.225-7048 applies, and access to this data is limited to DLA contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandatory export control training, and have been formally approved by the DLA controlling authority. The solicitation was posted on August 5, 2026, with a response deadline of August 13, 2026, under NAICS code 333611, and the performance location is designated as Texarkana, Texas, with Ashley Jones-Turner as the primary point of contact.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

SHROUD SEGMENT, TURB

Solicitation # SPE4A5-26-T-331F

The contract pertains to the procurement of 75 units of a SHROUD SEGMENT, TURB with part number 5200T09G01 and NSN 2840-01-691-7435, issued under solicitation SPE4A5-26-T-331F by the Department of Defense through the ASC SUPPLIER OPER OEM DIVISION. Delivery is required within 363 days of contract award, with shipments to be delivered FOB origin and inspected and accepted at the destination point: DLA Distribution Cherry Point in North Carolina. The item is classified as a Critical Application Item, and all packaging must comply with MIL-STD-2073-1E and MIL-STD-129, with specific packaging codes and labeling instructions provided; no special marking is required. Sampling and inspection must follow MIL-STD-1916 or a comparable zero-based sampling plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II respectively, and acceptance requiring zero non-conformances unless otherwise specified. The supplier must adhere to DLA packaging requirements, configuration change management protocols, and the Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment, as this contract involves Covered Defense Information. All documentation must align with the DLA Master List of Technical and Quality Requirements, and any deviation or waiver must be formally requested. The unit of issue is each (EA), and the total contract value is based on a unit price for 75 units, with no variance allowed in quantity. The required delivery date is August 12, 2027, and transportation logistics are governed by DLAD procedural notes C19 and C20.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

FAIRING, FRAME, AIRCR

Solicitation # SPE4A0-26-T-4076

The contract is for the procurement of one fairing and frame assembly for an aircraft gas turbine engine, identified by NSN 2840-01-651-2647 and part number 52G169-01 from RTX Corporation, with a required delivery within five days of order placement and a target delivery date of June 17, 2026. The item must be delivered FOB destination to Lajes Field, Building T-605, Terceira Island, Portugal, and is designated a critical application item requiring strict adherence to technical and quality standards. Compliance is mandated with MIL-STD-2073-1E for packaging and preservation, MIL-STD-129 for marking, and MIL-STD-130 for Item Unique Identification (IUID), with no special marking required beyond these standards. Traceability documentation must be retained in accordance with DLA Directive Procurement Note C03, and Federal Aviation Administration airworthiness approval (RQ019) and bare item marking (RQ046) requirements apply. Inspection and acceptance occur at the destination, with sampling conducted under MIL-STD-1916 or ASQ H1331, using zero non-conformances unless otherwise specified, and unspecified attributes treated as major with an AQL of 1.0. Technical and quality requirements referenced by R or I numbers are sourced from the DLA Master List, and the contractor must maintain current SAM registration and provide accurate UEI and CAGE codes. The contract includes multiple DFARS and FAR clauses governing cybersecurity, safeguarding covered defense information, whistleblower rights, hazardous material labeling, use of U.S.-flag vessels for ocean transport, acceleration of payments to small business subcontractors, and prohibition of restrictive internal confidentiality agreements. The contract is fixed-price and utilizes Wide Area WorkFlow (WAWF) for all invoicing and receiving reports. No unit price or total contract value is provided, and while the solicitation includes numerous compliance and administrative requirements, no formal evaluation factors or award classification are specified.

AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Commercial Off-The-Shelf (COTS) Fuel Pump SupplyThe contract pertains to the supply of commercial off-the-shelf electrical fuel pumps that fully comply with National Stock Number (NSN) requirements and U.S. military specifications, with the core deliverable identified under CLIN 0001. These fuel pumps must meet stringent military standards for performance, durability, and reliability, and must be packaged in accordance with approved defense logistics protocols to ensure readiness and field compatibility. The procurement is structured as a subcontract under the Department of Defense and is managed by the LAND SUPPLIER OPNS VEHICLE SPT organization, with performance expected to occur at Fort Campbell, Kentucky, specifically at the 42223-0000 zip location. The solicitation was posted on August 4, 2026, with responses due by August 17, 2026, indicating a compact twelve-day window for interested parties to submit proposals. The North American Industry Classification System code 333611 categorizes this as a business involving engine and engine parts manufacturing, aligning the suppliers with those capable of producing high-integrity automotive and defense-grade components. Although no set-aside designation or point of contact is specified, the requirement is clearly focused on NSN-compliant COTS products, emphasizing speed of delivery and proven military suitability over custom engineering. All proposals must demonstrate adherence to DoD packaging and documentation standards to ensure seamless integration into existing supply chains and logistics networks.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

MODULATOR ASSEMBLY,

Solicitation # SPE4A5-26-T-325G

The contract specifies the procurement of one unit of a Modulator Assembly, Exciter, Ignition, identified by NSN 2920-01-573-0929 and part numbers 0-300-261-01 for Honeywell International Inc. and V0-300-261-01 for Vericor Power Systems LLC. It is classified as a commercial item and is designated as a critical application item requiring strict adherence to labeling, packaging, and marking standards per MIL-STD-129 and MIL-STD-2073-1E, with no special marking codes required. Packaging must comply with DLA packaging requirements, including use of intermediate and unit containers coded E5, and palletization standards. The item is subject to tailored higher-level quality requirements, and inspection and acceptance occur at the destination. Sampling for quality verification follows MIL-STD-1916 or ASQ H1331, Table 1, with zero nonconformances allowed unless otherwise specified, and attributes are assigned verification levels of VII, IV, and II for critical, major, and minor characteristics respectively. Technical and quality requirements are governed by the DLA Master List, with revisions controlled by the solicitation or award date depending on acquisition size. Delivery is due in 171 days, with an original required delivery date of September 25, 2027, and a need ship date of January 31, 2027. The contract specifies FOB origin delivery, with zero variance permitted in quantity, and requires compliance with hazardous materials shipping protocols. The item is not subject to Item Unique Identification per customer request. The contracting office is the ASC Supplier Oper OEM Division under the Department of Defense, with the procurement executed under a total small business set-aside, NAICS code 333611. All documentation, including unit of issue and transportation instructions, references DLA procedural notes and official DLA web resources. The sole point of contact for the solicitation is Evgeny Korovin, and the delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

BLADE SET, COMPRESSO

Solicitation # SPE4A6-26-T-12LW

This contract pertains to the procurement of a single blade set for a non-aircraft gas turbine compressor, identified by part number 10-10012-01, manufactured by Honeywell International Inc. and sourced through Vericor Power Systems LLC. The item is governed by stringent technical and quality requirements incorporated from the DLA Master List, with compliance mandated across manufacturing, documentation, packaging, and inspection processes. All supplies must meet zero-defect sampling standards under MIL-STD-1916 or equivalent zero-based plans, with critical attributes requiring the strictest verification levels. The blade set is designated as a critical application item and must be mercury-free, with no intentional use of mercury or mercury-containing compounds except in permitted exceptions such as specified instruments or batteries, all of which must include secondary containment per NAVSEA standards. Packaging and marking must fully adhere to MIL-STD-2073-1E and MIL-STD-129, with individual blades separated to prevent contact and damage, and palletization conforming to DLA packaging requirements. The delivery is FOB origin, with inspection and acceptance performed at origin, and the item must be delivered within 20 days to Camp Pendleton, California, via traceable means exclusively—parcel post is prohibited. The NSN is 2835-01-538-6223, and the contract includes specific logistics, transportation, and marking directives, with a required delivery date of July 29, 2026. Configuration control, engineering change proposals, and deviation requests are tightly managed under RQ002, and all documentation must support source approval per RC001. The contract enforces full traceability, government identification removal procedures for non-accepted items, and tailored quality requirements applicable to both manufacturers and non-manufacturers.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Solicitation # SPE4A7-26-T-616K

The contract pertains to the procurement of a bracket, duct with part number 5170T16G01, supplied by Thermal Structures, Inc and General Electric Company, under NSN 2840-01-666-6902. A total quantity of 36 units is required, to be delivered FOB origin within 190 days from the contract award, with no tolerance for variance in quantity. Inspection and acceptance occur at the origin, and all items must comply with stringent quality and documentation requirements as defined by DLA’s Master List of Technical and Quality Requirements identified by R and I numbers, including tailored higher-level quality standards. The sampling method must follow MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required unless otherwise stated, and critical attributes must be verified at Level VII or with an AQL of 0.1. Packaging must conform to MIL-STD-2073-1E and DLA’s packaging requirements, with marking adhering to MIL-STD-129 and no special marking codes applied. All items must be palletized per RP001, and the delivery destination is DLA Distribution Cherry Point in North Carolina. The contract is governed by the DLA’s procurement directives, including transportation and freight guidelines, and the unit of issue is each (EA). The solicitation was issued on August 4, 2026, with responses due by August 12, 2026, under NAICS code 333611, and is managed by the Department of Defense’s ASC Supplier Oper AE and AF Division.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

BRACKET, SCAVENGER

Solicitation # SPE4A7-26-T-616H

The contract specifies the procurement of a BRACKET, SCAVENGER under solicitation SPE4A7-26-T-616H with a firm-fixed-price of $36.000 per unit for a total quantity of 36 units, resulting in a contract value of $1,296.00. The item is identified by NSN 2840016666891 and must be manufactured, inspected, and delivered in full compliance with technical and quality requirements from the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers including RQ011 for removal of government identification, RQ017 for bare-item marking, and RT001 for measuring and test equipment calibration. Sampling for quality assurance is governed by MIL-STD-1916 or ASQ H1331 Table 1, requiring zero non-conformances in samples unless otherwise stated, with critical, major, and minor attributes assigned specific verification levels or AQLs, and unspecified attributes treated as major. Packaging must adhere to MIL-STD-2073-1E with clean/dry preservation and unit containers marked E5, while labeling follows MIL-STD-129 with no special marking required, and palletization must meet DLA’s RP001 requirements. Delivery is FOB origin, with a 190-day delivery schedule ending September 10, 2027, and final destination is DLA Distribution Cherry Point in North Carolina. Inspection and acceptance occur at the destination point by the government, and all shipments must use WAWF for invoicing and receiving reports. The contract includes mandatory cybersecurity clauses such as 252.204-7012 for safeguarding covered defense information and 252.240-7997 requiring compliance with NIST SP 800-171 controls, along with prohibitions on hexavalent chromium, hazardous materials storage, transportation on foreign-flag vessels without waiver, and unauthorized arbitration agreements. Offerors must hold a valid UEI and CAGE code, certify their small business status if applicable, and comply with whistleblower protections and disclosure requirements. All submissions must be made electronically through DIBBS by August 12, 2026, and no paper submissions are permitted.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

PLATE, COMPONENT MOUNTI

Solicitation # SPE4A5-26-T-329N

The contract pertains to the procurement of a component mounting plate for aircraft gas turbines, identified by part number 5168T10G01 and NSN 2840-01-667-1342, with a requirement for 12 units to be delivered within 190 days from the contract award. The item is designated as a critical application component, subject to stringent technical and quality standards referenced through the DLA Master List of Technical and Quality Requirements, identified by R or I numbers. All supplies must comply with MIL-STD-2073-1E packaging standards, MIL-STD-129 marking requirements, and DLA packaging guidelines, with no special marking codes applied. Sampling and inspection procedures follow MIL-STD-1916 or Asq H1331 zero-based plans, with critical, major, and minor attributes assigned corresponding verification levels or AQLs unless otherwise specified; any unspecified attributes are treated as major. Acceptance requires zero non-conformances in the sample lot, with inspection and acceptance occurring at the destination. The delivery is FOB origin, with no variance allowed in quantity, and the sole delivery point is DLA Distribution Cherry Point in North Carolina. The contract is governed by the DLA procurement system, with transportation rules outlined in DLAD PROC NOTES C19 and C20, and the supplier must adhere to the referenced technical specifications and quality provisions without exception.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → DLA Aviation

Same awarding agency

Technical Data Package (TDP) Development and SubmissionThe contract involves the development and submission of a complete technical data package in accordance with DLA-WS-VIBB 26-20-1001, encompassing all required manuals, schematics, and maintenance documentation necessary for full technical compliance. The work must be compiled and formatted to meet stringent military standards, ensuring accurate, organized, and submission-ready deliverables that support operational readiness and logistics support for defense systems. This is a subcontract opportunity under the NAICS code 541490, directed by DLA Aviation under the Department of Defense, with performance required at Cherry Point, North Carolina, 28533. The solicitation was posted on August 6, 2026, and responses are due by September 21, 2026, with no set-aside designation specified.

Other Specialized Design Services

POSTED

about 22 hours ago

DEADLINE

in about 1 month

Operator Training Program DeliveryThe contract outlines the delivery of an on-site training program for Department of Defense Defense Logistics Agency Aviation personnel focused on the safe operation, routine maintenance, and troubleshooting of high-precision jig grinders. The training is to be conducted at Cherry Point, North Carolina, with a specific emphasis on ensuring personnel achieve proficiency in handling precision machining equipment critical to defense manufacturing and repair operations. The program is classified as a subcontract under NAICS code 611430, indicating it falls under professional and management development training services, and is intended to enhance workforce competence through hands-on, location-specific instruction. The solicitation was posted on August 6, 2026, with a response deadline set for September 21, 2026, allowing potential vendors sufficient time to prepare and submit proposals detailing their methodology, instructor qualifications, training curriculum, equipment requirements, and safety protocols. While the contract does not specify a set-aside designation, it requires execution at the designated government facility where the equipment is in use, ensuring relevance and practical application. Training outcomes must meet operational readiness standards, and all instruction must align with federally mandated safety and technical guidelines for precision machinery use within defense logistics environments.

Professional and Management Development Training

POSTED

about 22 hours ago

DEADLINE

in about 1 month

Post-Installation Testing and CalibrationThe contract requires comprehensive performance testing, calibration, and verification of jig grinder accuracy following installation, with specific focus on alignment checks and validation of dimensional tolerances to ensure operational precision. This work is critical to maintaining the high standards required for aerospace and defense manufacturing applications, where even minor deviations can impact component integrity and system performance. All testing procedures must adhere to established industry and military specifications to guarantee the equipment meets functional requirements under actual operating conditions. The subcontract is issued under NAICS code 541330 for engineering services and is managed by the Defense Logistics Agency Aviation, a division of the Department of Defense. Performance must occur at Cherry Point, North Carolina, with a response deadline of September 21, 2026. The contract does not specify a solicitation number or set-aside status, and no point of contact information is provided. Bidders are expected to demonstrate technical expertise in precision machinery calibration and proven experience with similar defense-related equipment testing protocols.

Engineering Services

POSTED

about 22 hours ago

DEADLINE

in about 1 month

Installation, Rigging, and Unloading ServicesThe contract calls for the on-site delivery, unloading, rigging, and precision installation of two jig grinders at the DLA Aviation facility in Cherry Point, North Carolina, with a zip code of 28533. Services include comprehensive alignment, leveling, and seamless integration of the equipment to meet stringent operational standards, ensuring the machines are fully functional within the facility’s existing infrastructure. All work must be performed according to technical specifications governing industrial machinery installation, with an emphasis on accuracy and safety throughout the process. The contract is classified as a subcontract under NAICS code 238990, with a response deadline of September 21, 2026, and was posted on August 6, 2026. The performance location is at the Department of Defense's DLA Aviation site, and all activities must be completed in compliance with federal contracting requirements applicable to defense-related installations. The scope requires specialized expertise in heavy machinery handling and precision equipment setup, with no set-aside restrictions indicated. The contract does not include point of contact details, and further information is accessible through the provided SAM.gov link.

All Other Specialty Trade Contractors

POSTED

about 22 hours ago

DEADLINE

in about 1 month

High Precision Jig Grinder SupplyThe contract calls for the supply of two new, factory-certified high precision jig grinders that must fully comply with DLA Aviation’s technical specifications and accompanying data package requirements. These machines are critical for precision manufacturing and maintenance operations and must be delivered to the designated place of performance in Cherry Point, North Carolina, with a zip code of 28533. The solicitation is classified as a subcontract under NAICS code 333242, indicating it pertains to the manufacture of machine tools, and is issued by the Department of Defense through DLA Aviation. All equipment must meet stringent certification standards to ensure reliability and performance in defense-related applications. The response deadline for submissions is set for September 21, 2026, at 7:00 a.m., with the opportunity posted on August 6, 2026. There is no specified set-aside designation, meaning this contract is open to all eligible subcontractors without preference-based restrictions. The contract does not list a designated point of contact, and no office address is provided beyond the place of performance. Interested parties must reference the SAM. gov link to access the complete solicitation package, ensuring full alignment with all technical, documentation, and delivery obligations before submission.

Semiconductor Machinery Manufacturing

POSTED

about 22 hours ago

DEADLINE

in about 1 month

Technical Data and Drawing Reverse Engineering

Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

about 22 hours ago

DEADLINE

Sub-tier Supplier Management for Critical Components

Plumbing Fixture Fitting and Trim Manufacturing

POSTED

about 22 hours ago

DEADLINE

Quality Assurance and Inspection Services

Testing Laboratories and Services

POSTED

about 22 hours ago

DEADLINE

Precision Machining of Axial Fan Components

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 22 hours ago

DEADLINE

HOSE ASSEMBLY, EMERGENCY LOCK / NSN 1620-01-116-2354 / C-5 AIRCRAFT

Solicitation # SPE4A726R0731

The Government is preparing to award a five-year Indefinite Quantity Contract for the HOSE ASSEMBLY, EMERGENCY LOCK, identified by NSN 1620-01-116-2354, with an estimated annual quantity of 40 units. The contract will be issued under FAR 6.302, limiting competition to a single approved source, Designed Metal Connections Inc. (CAGE 14798), due to the proprietary nature of part number 179-50074 and the lack of complete technical data within DLA Weapons Support - Richmond. No other qualified sources currently exist, and any contractor seeking to participate must first submit a Source Approval Request for review and approval by the assigned ESA. The item is classified as critical but not a Critical Safety Item, and export control regulations apply. Production units will be delivered FOB Destination with inspection and acceptance conducted at the origin. The estimated solicitation issue date is August 24, 2026, with proposals due by September 25, 2026, and contractors must be registered in SAM.gov to be eligible for award. The Government has determined that commercial item acquisition policies under Part 12 do not apply, but offerors may still indicate if their offering qualifies as a commercial item within 15 days of notice. The contract award will consider price, past performance, and other factors as outlined in the solicitation. All solicitation documents will be available exclusively through DIBBS in PDF format, with no paper copies provided. The contracting office is located in Richmond, Virginia, and points of contact are Christopher Rose and Jeremy Prince from DLA Aviation.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 22 hours ago

DEADLINE

in about 2 months

BEARING,SLEEVE,LINE

Solicitation # SPE4A626Q1284

Solicitation SPE4A626Q1284 is a sources-sought notice issued by DLA Aviation under the Department of Defense to identify qualified suppliers for a sleeve bearing, NSN 3110-01-341-6408, with approved source KATO ENGINEERING INC. (CAGE 32770). The notice invites surplus dealers, small business dealers, and distributors with existing stock or newly manufactured inventory to respond, requiring submission of a completed Surplus Certificate DLAD 52.211-9000 or adequate traceability documentation to verify product acceptability, along with available quantities and pricing. The acquisition will follow FAR 12 procedures for commercial items and FAR 13.5 for other than full and open competition, with no set-aside designated. Responses are due by August 12, 2026, and must be emailed to Matthew Diefes at matthew.diefes@dla.mil. The requested delivery is 11 units with a 255-day delivery window ARO, FOB Origin, with inspection and acceptance occurring at destination, and the item is subject to export control of technical data. The place of performance is Richmond, Virginia, and the contracting office is located at 23237. While the notice identifies the approved manufacturer and specifies the commercial nature of the item, it includes no pricing data, contract value, evaluation factors, or formal contract clauses, as it is preparatory in nature and not a binding solicitation. No packaging, marking, barcoding, or MIL-STD requirements are specified, and no representations, certifications, or socioeconomic claims from offerors are solicited or required beyond traceability and surplus documentation. The solicitation will proceed under terms consistent with standard DLA Aviation procurement practices, with award potentially based on price, past performance, and other factors outlined in the final solicitation document available via DIBBS.

Aircraft Engine and Engine Parts Manufacturing

POSTED

about 22 hours ago

DEADLINE

51--JACK,HYDRAULIC,HAND

Solicitation # SPE4A626T14GQ

The contract seeks the procurement of six hydraulic hand jacks identified by NSN 5120005445647, with delivery required to W1A8 DLA DISTRIBUTION within 169 days after award. The only approved source for this item is vendor 00994 with part number 942AS100. This procurement is conducted through a request for quotation issued under solicitation number SPE4A6626T14GQ, with responses due by August 14, 2026. The solicitation is exclusively available electronically via the provided link; no hard copies are provided, and no specifications, plans, or drawings are available to offerors. All responsible sources may submit quotes, which must be submitted electronically and received before the deadline to be considered. The contract is set aside under the SBA Certified Women-Owned Small Business (WOSB) Program, limiting eligibility to certified WOSB firms. The North American Industry Classification System code is 332216, and the contracting office is the DLA Aviation, located in Richmond, Virginia, under the Department of Defense. Any inquiries should be directed via email to the point of contact listed in the solicitation document, with additional guidance available through the DIBBS portal.

Saw Blade and Handtool Manufacturing

POSTED

about 22 hours ago

DEADLINE