Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

30--SHAFT,SHOULDERED

Awarded
SPE7LX26U7032Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is an indefinite delivery vehicle for the procurement of 30-SHAFT, SHOULDERED components, with an estimated quantity of 25,000 units and a total ceiling value of $350,000.00. It was awarded under solicitation number SPE7LX26U7032, posted on June 2, 2026, and is classified under NAICS code 213113, indicating its alignment with oil and gas field machinery and equipment manufacturing. The awarding agency is the DLA Land and Maritime, a division of the Department of Defense, with the point of contact being Stephen Weaver of the Columbus, Ohio office, reachable via email and phone. There is no designated set aside type, and the place of performance has not been specified, leaving flexibility for delivery locations. All award-related communications and documentation are accessible through the SAM.gov platform using the provided link.

General Info

30-SHAFT,SHOULDERED component contract for up to $350,000, 25,000 units, DLA Land and Maritime, SAM.gov managed.

Agency

Department Of Defense → DLA Land And Maritime

Contract Value

$0

NAICS

213113 - Support Activities for Coal Mining

Place of Performance

OH, USA

Set-Aside

NONE

Awardee

HORIZON AEROSPACE SOLUTIONS, LLC

Award Issued Date

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseAwarded
Posted

Combined Synopsis

Awarded

Contract was awarded

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DLA Land And Maritime
Contacts1 person available
OfficeCOLUMBUS, OH, 43218-3990, USA
Organization / AgencyDepartment Of Defense → DLA Land And Maritime
Office AddressCOLUMBUS, OH, 43218-3990, USA
Contacts
Stephen Weaver
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
Proposed procurement for NSN 3040012284200 SHAFT,SHOULDERED: Line 0001 Qty 25 UI EA Deliver To: By: 0137 DAYS ADO This Solicitation may result in an Automated IDC (Indefinite Delivery Contract). The term of the contract/order will be one year or until the aggregate total of orders placed against the contract/order reach 350000.00. The estimated number of orders per year is 3. The Guaranteed Minimum quantity will be 3. Items will be shipped to various CONUS and OCONUS (via consolidation and containerization point) DLA Depots. The solicitation is an RFQ and will be available at the link provided in this notice. Hard copies of this solicitation are not available. Digitized drawings and Military Specifications and Standards may be retrieved, or ordered, electronically. All responsible sources may submit a quote which, if timely received, shall be considered. Quotes must be submitted electronically.

Similar Contracts

Same NAICS industry code

NAICS: 213113
New
DIBBS
PIN, STRAIGHT, HEADLESS
Solicitation # SPE4A6-27-T-7229
Solicitation SPE4A6-27-T-7229, issued by the DLA Weapons Support ASC Commodities Division, is for the procurement of 43 headless straight pins, identified by NSN 5315-01-454-2514. The contract specifies a delivery window of 252 days after order, with a required delivery and ship date of July 15, 2027. Shipping is established as FOB Origin, with the destination for both inspection and acceptance being DLA Distribution Red River in Texarkana, Texas. The contractor must adhere to strict quality and packaging standards, including ASTM D3951 for general packaging and RP001 for palletization, while all marking and labeling must comply with MIL-STD-129. Quality assurance will be managed through sampling methods such as MIL-STD-1916 or ASQ H1331, with a zero-nonconformance requirement for acceptance. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and compliance with various FAR and DFARS clauses, including the Buy American Act, safeguarding of covered defense information, and prohibitions on certain telecommunications equipment. Item Unique Identification is not required for this order.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details
NAICS: 213113
New
DIBBS
BUSHING, SLEEVE
Solicitation # SPE4A6-27-T-6495
Solicitation SPE4A6-27-T-6495 is a federal procurement issued by the Defense Logistics Agency Weapons Support ASC Commodities Division for one sleeve bushing, identified by NSN 3120-01-521-2731. The requirement is not a small business set-aside and falls under NAICS code 213113. Delivery is required within 499 days after receipt of order, with a need ship date of April 21, 2027, and an original required delivery date of June 18, 2027. The contract is established as FOB Origin, with both inspection and acceptance occurring at the origin. The government will evaluate offers based on price, including a government testing cost of 6,957.00 dollars for first article approval. The contract mandates strict adherence to DLA Master List technical and quality requirements, including ISO 9001:2015 compliance for manufacturer inspection systems. Packaging must follow ASTM D3951 and MIL-STD-129, with specific palletization requirements under RP001. Due to the nature of the technical data, the item is subject to ITAR or EAR export controls, requiring contractors to have approved US/Canada Joint Certification Program certification. Additionally, the contract incorporates comprehensive cybersecurity and information security mandates, including DFARS 252.204-7012 and CMMC Level 2 certification requirements. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

3 days ago

DEADLINE

in 5 days
View Details
NAICS: 213113
New
DIBBS
PIN, QUICK RELEASE
Solicitation # SPE4A6-27-T-5885
Solicitation SPE4A6-27-T-5885 is a fixed-price contract for the procurement of 100 units of Quick Release Pins (NSN 5315-01-49-43040) for the DLA Weapons Support ASC Commodities Division. This item is designated as a critical application item and must be manufactured according to the current revisions of NASM14531 and reference standards NAS1322 through 1326. The required delivery date is May 27, 2027, with a need ship date of April 15, 2027, delivered FOB Origin to the DDSP New Cumberland Facility in Pennsylvania. Quality assurance is stringent, requiring inspection and acceptance at origin. Manufacturers must comply with SAE AS9003 or ISO 9001, utilizing a zero-based sampling plan per MIL-STD-1916 or ASQ H1331. Packaging must adhere to RP001 and ASTM D3951, with marking and labeling following MIL-STD-129. The solicitation is not a small business set-aside and explicitly prohibits the use of additive manufacturing for the produced items. Compliance with the Buy American Act, Berry Amendment, and NIST SP 800-171 cybersecurity requirements is mandatory.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

6 days ago

DEADLINE

in 2 days
View Details
NAICS: 213113
New
DIBBS
SHAFT, SHOULDERED
Solicitation # SPE4A5-27-T-1725
Solicitation SPE4A5-27-T-1725 is a request for quotations issued by the DLA Weapons Support ASC Supplier Oper OEM Division for the procurement of three shoulder shafts, identified by NSN 3040011634365 and Hamilton Sundstrand Corporation part number 731791. This is a commercial item procurement with a delivery window of 164 days after order, shipped FOB Origin to the DLA Distribution Depot Oklahoma at Tinker AFB. The requirement is not a small business set-aside and falls under NAICS code 213113. The contract mandates strict quality and technical compliance, requiring manufacturers to adhere to ISO 9001:2015 standards and utilize sampling methods per MIL-STD-1916 or ASQ H1331. Inspection and acceptance will occur at the destination. Packaging must comply with ASTM D3951 and RP001, with labeling following MIL-STD-129. Key regulatory requirements include CMMC Level 2 self-assessment, adherence to the Buy American Act, and the use of the Wide Area Workflow system for electronic invoicing. The procurement is further governed by various FAR and DFARS clauses regarding cybersecurity, safeguarding covered defense information, and the prohibition of hexavalent chromium.
DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

6 days ago

DEADLINE

in 2 days
View Details
NAICS: 213113
New
DIBBS
STRAP, RETAINING
Solicitation # SPE7L1-27-T-2018
Solicitation SPE7L1-27-T-2018 is a request for quotations issued by the DLA Weapons Support Land Supply Chain for the procurement of 305 retaining straps, identified by NSN 5340-00-904-3789. This commercial item procurement is issued under the First Destination Transportation program with FOB Origin terms, requiring delivery to DLA Distribution Warner Robins in Georgia. The delivery schedule specifies a period of 168 days after delivery order, with a need ship date of April 20, 2027. The procurement is not a small business set-aside, though it allows for the HUBZone price evaluation preference. The contract mandates strict adherence to DLA Master List technical and quality requirements, including specific packaging and marking standards such as MIL-STD-129 and MIL-STD-130N. Inspection and acceptance will occur at the destination per FAR 52.246-1. Offerors must comply with the Buy American Act, the Berry Amendment, and NIST SP 800-171 cybersecurity assessment requirements. Payment processing must be conducted electronically via the Wide Area WorkFlow system. Notably, the government will not evaluate offers utilizing additive manufacturing processes, and any alternate part offers must be accompanied by a complete data package for evaluation.
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

6 days ago

DEADLINE

in 5 days
View Details
NAICS: 213113
DIBBS
SHAFT, SHOULDERED
Solicitation # SPE7M0-27-T-0480
Solicitation SPE7M0-27-T-0480 is a request for quotations issued by the DLA Weapons Support Maritime Supply Chain ESOC Buys for the procurement of nine shoulderered shafts, identified by NSN 3040012277605. The required delivery date is October 21, 2026, with a delivery timeframe of five days after the order is placed. The items are to be delivered to the Pearl Harbor Naval Shipyard IMF in Hawaii. While the RFQ header indicates FOB Destination, the First Destination Transportation program instructions specify that offers should be submitted based on FOB Origin. Inspection and acceptance will occur at the destination. The contract mandates strict adherence to packaging and marking standards, specifically ASTM D3951 and MIL-STD-129, with DLA Master List technical and quality requirements taking precedence. Key compliance mandates include CMMC Level 2 self-assessment, the prohibition of intentionally added mercury, and adherence to the Buy American Act and Berry Amendment. Payment and receiving reports must be processed electronically through the Wide Area WorkFlow system. This is not a small business set-aside, and the NAICS code assigned is 213113.
DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

8 days ago

DEADLINE

in 5 days
View Details
NAICS: 213113
DIBBS
SHAFT, SHOULDERED
Solicitation # SPE7L1-27-U-0105
Solicitation SPE7L1-27-U-0105 is a request for quotations issued by the DLA Weapons Support Land Supply Chain for the procurement of 13 shoulder shafts, identified by NSN 3040-01-228-4200. This is a total small business set-aside that may result in a unilateral Indefinite Delivery Contract with a maximum value of 350,000.00 dollars for a one-year period. The estimated annual quantity is 13 units, with a required delivery timeframe of 96 days after the award. Award will be based on the price quoted for the estimated annual demand, provided the offeror is responsible and conforms to all terms and conditions. Notably, the government will not evaluate offers involving additive manufacturing unless specifically authorized. Technical compliance requires adherence to basic drawing 53711 5191163 revision D. The contract mandates strict packaging and marking standards, including ASTM D3951 and MIL-STD-129, with DLA Master List requirements taking precedence. Security and regulatory compliance are critical, as the item contains technical data subject to ITAR or EAR export controls and requires CMMC Level 2 certification. Additionally, contractors must comply with the Buy American Act and the Berry Amendment. Inspection and acceptance will occur at the origin, and all invoicing and receiving reports must be processed electronically through the Wide Area WorkFlow system.
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

9 days ago

DEADLINE

in 6 days
View Details
NAICS: 213113
DIBBS
Groundwater Sampling and Monitoring Well InstallationThe contract entails the installation of monitoring wells and the conduct of groundwater sampling at the DFSP Norwalk facility, with activities including well purging, real-time field parameter measurements, and proper sample preservation to ensure data integrity. All work must adhere to established environmental and regulatory protocols to support accurate assessment of groundwater conditions. The effort is classified as a subcontract under the NAICS code 213113, indicating it falls under support activities for mining, and is managed by the Defense Logistics Agency under the U.S. Department of Defense. The contract was posted on July 20, 2026, and the performance location is tied to the Norwalk site, though specific city and state details are not provided. The associated contract and delivery order identifiers are SPE60325D5003 and SPE60326FA4W5, respectively, with procurement details accessible via the DIBBS portal.
Defense Logistics Agency

POSTED

3 months ago

DEADLINE

N/A
View Details
NAICS: 213113
SLED
Prescribed Pile BurningThis subcontract involves the execution of controlled burning of fuel piles for prime contractors on CAL FIRE fuels reduction projects located within the Sequoia National Forest. The scope of work includes the construction of fuel piles and the implementation of prescribed burns utilizing drip torches, water tenders, and fire suppression equipment. The primary objective is to ensure the complete consumption of fuel piles and the delivery of secured burn sites. To qualify for this project, personnel must hold the Certified Prescribed Burn Boss qualification and possess the necessary burn permits from CAL FIRE and the USFS. The contract is categorized under NAICS code 213113 and is managed by the California Department of Forestry and Fire Protection.
California Forestry and Fire Protection, Department of

POSTED

4 months ago

DEADLINE

N/A
View Details
NAICS: 213113
SLED
Manual Thinning and Surface Fuel RemovalThis subcontract for Manual Thinning and Surface Fuel Removal involves performing manual removal of live or dead ladder fuels, surface fuels, and dead trees within the Sequoia National Forest. Working as a subcontractor for prime contractors on CAL FIRE fuels reduction projects, the provider will execute hand-thinning and brush clearing using specialized tools such as chainsaws, loppers, and pulaskis to deliver cleared acreage. The contract requires the provider to maintain standard forestry personal protective equipment and hold wildland fire safety certifications, specifically S-130 and S-190. This project falls under NAICS code 213113 and is managed by the California Department of Forestry and Fire Protection.
California Forestry and Fire Protection, Department of

POSTED

4 months ago

DEADLINE

N/A
View Details
NAICS: 213113
SLED
Prescribed Fire Treatment and ImplementationThis subcontract, titled Prescribed Fire Treatment and Implementation, is issued by the El Dorado County Resource Conservation District in California. The selected provider will act as a subcontractor for prime contractors on El Dorado County Fire Safe Council projects, focusing on the modification of surface fuels through controlled burns. The primary objective is to deliver successfully burned acreage with significantly reduced fuel loads to improve regional fire safety. The contractor is responsible for planning and executing prescribed fire treatments and maintenance burns using specialized equipment, including drip torches and weather monitoring tools. To ensure safety and regulatory compliance, the provider must hold a Certified Prescribed Burn Manager certification and strictly adhere to established smoke management plans. This project falls under NAICS code 213113 and was posted on June 29, 2026.
El Dorado County Resource Conservation District

POSTED

4 months ago

DEADLINE

N/A
View Details
NAICS: 213113
SLED
Geotechnical Drilling ServicesThis subcontract for Geotechnical Drilling Services, issued by the California Department of Parks and Recreation, involves specialized drilling operations in Coronado, California. The scope of work requires the use of truck-mounted hollow-stem auger rigs to complete three borings at depths of 20 feet and 90 feet. Additionally, the contractor is responsible for the removal of approximately 32 cubic feet of fill material. The project is categorized under NAICS code 213113 and was posted on April 17, 2026. All performance activities will take place within the 92118 zip code area.
California Parks and Recreation, Department of

POSTED

6 months ago

DEADLINE

N/A
View Details

More opportunities from Department Of Defense → DLA Land And Maritime

Same awarding agency

NAICS: 335999
New
Federal
INSULATING COMPOUND,ELECTRICAL
Solicitation # CM26161009
This pre-solicitation notice, issued by DLA Land and Maritime (SPE7MX), seeks offers for electrical insulating compound under National Stock Number 5970-002957568. The requirement is for a specific type HF compound in one gallon cans, conforming to specification MIL-DTL-3064C (or MIL-I-3064). The government is considering an Indefinite Delivery Contract (IDC) structure, typically featuring a three-year base period with the possibility of two to four one-year option periods. The total annual demand quantity is 927 gallons, with price break ranges solicited from 58 to 1,392 gallons. The solicitation is expected to be available on DIBBS on or after October 30, 2026, with a final response date of December 2, 2026. Performance will take place in Columbus, Ohio, with a required delivery timeframe of 45 days. Award decisions will be based on a combination of price, delivery, past performance, and other evaluation factors. This acquisition follows simplified acquisition procedures for commercial items under FAR Part 12.201. Because the government does not possess complete technical data, it intends to contract only with approved sources under 10 U.S.C. 3204(a)(1). All offers must be submitted in English and in U.S. dollars.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

1 day ago

DEADLINE

in about 1 month
View Details
NAICS: 334310
New
Federal
HEADSET-MICROPHONE : NSN 5965-01-204-8505
Solicitation # SPE7MX26RX089
This acquisition is for the procurement of microphone headsets under NSN 5965-01-204-8505 with an estimated annual demand quantity of 982 units. The contract will be structured as a Firm-Fixed Price Indefinite Delivery Contract consisting of a three-year base period with two one-year options. This is an unrestricted solicitation governed by FAR Part 12.201 for commercial items and is subject to the Buy American Act. The NAICS code for this requirement is 334310 with a size standard of 750. The solicitation is expected to be issued around October 30, 2026, with responses due by November 30, 2026. Delivery is required within 426 days after the date of order, and shipping is designated as FOB Origin. Award decisions will be based on a combination of price, delivery, and performance. Interested parties can access technical data via the TDMT landing page and should submit their offers in US dollars through the DIBBS system or via email to the contract specialist.
Audio and Video Equipment Manufacturing

POSTED

5 days ago

DEADLINE

in about 1 month
View Details
NAICS: 332510
New
Federal
Hatch, Marine
Solicitation # SPE7MX26RX102
DLA Land and Maritime is seeking offers for a Firm-Fixed Price Indefinite Delivery Contract for Marine Hatches, identified by NSN 2040-01-357-9117. This acquisition is a 100 percent Small Business Set-Aside under NAICS code 332510, with an estimated annual demand quantity of 20 units. The contract structure consists of a three year base period followed by two option years, and all items must comply with the Buy American Act and specific technical drawings available via TDMT. The solicitation is expected to be issued around October 30, 2026, with a response deadline of November 30, 2026. Required delivery is within 241 days after the date of an order, and shipping is FOB Origin. Award decisions will be based on a combination of price, delivery, and performance. Interested parties should submit their offers in US dollars and English through the DIBBS system or via email to the contract specialist, Brandon Preece.
Hardware Manufacturing

POSTED

6 days ago

DEADLINE

in about 1 month
View Details
NAICS: 332999
Federal
Supplier for Component NSN 015715718This subcontract through DLA Land and Maritime requires the manufacture or distribution of 603 units of hardware component NSN 015715718. The supplier must ensure all components meet strict government specifications, including the application of MIL-STD-129 markings and the use of standard commercial packaging. Additionally, the provider is required to submit proof of commerciality in accordance with FAR Part 12. The completed materials are to be delivered to prime contractors located in Columbus, Ohio. This opportunity falls under NAICS code 332999 and is managed by the Department of Defense. Interested parties must adhere to the specified response deadline of October 29, 2026.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

7 days ago

DEADLINE

in about 14 hours
View Details
NAICS: 332999
Federal
Supplier for Component NSN 016603400This subcontract with DLA Land and Maritime requires the manufacture or distribution of 1,169 units of hardware component NSN 016603400. The supplier must ensure all components comply with government specifications and are delivered to Columbus, Ohio. The contractor is responsible for applying MIL-STD-129 markings and utilizing standard commercial packaging. Additionally, the supplier must provide proof of commerciality in accordance with FAR Part 12. This requirement falls under NAICS code 332999.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

7 days ago

DEADLINE

in about 14 hours
View Details
NAICS: 332999
Federal
Oshkosh Wholistic Sole Source Project
Solicitation # 75Q65
DLA Land and Maritime, specifically the Strategic Acquisitions office, is conducting market research for a potential Indefinite Delivery Indefinite Quantity (IDIQ) long term contract under solicitation 75Q65. The project focuses on the procurement of components and support for the Oshkosh MRAP-All Terrain Vehicle (M-ATV), including SOCOM variants and Mine Resistant Vehicles. Required items encompass a wide range of vehicular components, such as structural body parts, mechanical and electrical systems like wiring harnesses and fluid filters, and various specialized hardware and mounting brackets. While Oshkosh Defense is currently the only approved source, the agency is seeking additional manufacturers capable of producing these items. The procurement will be evaluated and awarded on a per NSN/CLIN basis, with specific requirements for standard commercial packaging and MIL-STD-129 markings. Interested parties must submit a Market Research Questionnaire by October 28, 2026, providing details on their business size, manufacturer status, and distribution networks. The performance location is listed as Columbus, Ohio, and the effort falls under NAICS code 332999. Estimated buy quantities have been identified for various components, though a total contract value has not yet been established.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

7 days ago

DEADLINE

in about 14 hours
View Details
NAICS: 332212
Federal
Specialized Maintenance ToolingThis subcontract opportunity with the Department of Defense, specifically for DLA Land and Maritime, involves the manufacture and supply of specialized maintenance tooling for diesel engines. The selected provider will be responsible for fabricating diagnostic equipment and specialized hand tools that meet or exceed original equipment manufacturer quality specifications, ensuring all deliverables align with specific National Stock Numbers. The procurement falls under NAICS code 332212 and is intended to support prime contractors delivering on DLA Land and Maritime supply contracts. Interested parties must note the response deadline of November 4, 2026, to submit their proposals for this specialized fabrication requirement.
Hand and Edge Tool Manufacturing

POSTED

8 days ago

DEADLINE

in 7 days
View Details
NAICS: 339999
Federal
Engine Gaskets and Seal KitsThis subcontract opportunity involves the manufacture and supply of sealing components and comprehensive repair kits for prime contractors supporting DLA Land and Maritime. The scope of work includes the fabrication of gaskets and O-rings, as well as the assembly of multi-part diesel engine repair kits identified by specific National Stock Numbers. To be eligible, providers must obtain DLA Approved Source qualification to ensure all products meet or exceed original equipment manufacturer quality specifications. The solicitation was posted on October 20, 2026, with a response deadline of November 4, 2026.
All Other Miscellaneous Manufacturing

POSTED

8 days ago

DEADLINE

in 7 days
View Details
NAICS: 333618
Federal
Fuel Injection and Fluid System ComponentsThis subcontract opportunity with DLA Land and Maritime involves the manufacture and supply of precision fuel delivery and fluid control components. The scope of work includes the precision machining and calibration of specific parts such as metering pumps, safety relief valves, calibrated flow valves, and fuel injection nozzles, all identified by specific National Stock Numbers. To be eligible, providers must obtain DLA Approved Source qualification to ensure all components meet or exceed original equipment manufacturer quality specifications. The solicitation was posted on October 20, 2026, with a response deadline of November 4, 2026, falling under NAICS code 333618.
Other Engine Equipment Manufacturing

POSTED

8 days ago

DEADLINE

in 7 days
View Details
NAICS: 332710
Federal
Heavy Engine Component ManufacturingThis subcontract for Heavy Engine Component Manufacturing involves the production and supply of high-tolerance structural diesel engine parts, including cylinder heads, camshafts, connecting rods, and vibration dampeners. The selected provider will perform casting, machining, and finishing services to support prime contractors fulfilling DLA Land and Maritime supply contracts. All delivered components must be identified by specific National Stock Numbers and meet or exceed original equipment manufacturer quality specifications. To qualify for this opportunity, providers must submit a Source Approval Request through the DLA Alternate Offer program. The contract falls under NAICS code 332710 and is managed by the Department of Defense. Interested parties must submit their responses by the deadline of November 4, 2026.
Machine Shops

POSTED

8 days ago

DEADLINE

in 7 days
View Details
NAICS: 333618
Federal
MULTI NSN DIESEL ENGINE
Solicitation # CM26259595
DLA Land and Maritime is conducting a sources-sought market survey under solicitation CM26259595 to identify potential manufacturers for a wide array of diesel engine components and assemblies. The scope of work includes the procurement of various parts identified by National Stock Numbers, such as cylinder heads, camshafts, connecting rods, fuel injection nozzles, gaskets, and specialized maintenance tools. Interested parties must provide the location of the manufacturer and relevant points of contact to Contract Specialist Zachary Mullins by the response deadline of November 4, 2026. Companies seeking to be qualified as an Approved Source must submit a Source Approval Request through the DLA Land and Maritime Alternate Offer program. This application package must include all necessary technical data to demonstrate that the prospective contractor can manufacture products that meet or exceed the quality of the Original Equipment Manufacturer. The process is categorized under NAICS code 333618, and the primary objective is to identify capable sources who can provide the specific engine components and repair kits detailed in the provided NSN list.
Other Engine Equipment Manufacturing

POSTED

8 days ago

DEADLINE

in 7 days
View Details
NAICS: 332912
Federal
VALVE, REGULATING, FL
Solicitation # CM26163006
DLA Weapons Support is conducting a sources sought action under project number CM26163006 to identify potential manufacturers for a regulating fluid valve, identified by NSN 4810010865757. The agency is seeking to establish a long-term contract with an estimated annual quantity of 301 units. This opportunity falls under NAICS code 332912 for Fluid Power Valves and Hose Fittings manufacturing, with a small business size standard of 1,000 employees. Because the agency does not possess the drawings or specifications for these items, interested parties must submit the required documentation per DLAD 52.217-9002 to become approved sources. Prospective bidders are required to complete a market survey and spreadsheet, providing manufacturer locations and points of contact. All responses must be submitted to Kristina Blanton by October 29, 2026.
Fluid Power Valve and Hose Fitting Manufacturing

POSTED

9 days ago

DEADLINE

in 1 day
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

NAICS: 213113
Awarded
DIBBS
53--BUSHING,SLEEVE
Solicitation # SPE4A7-26-T-357K
Defense Logistics Agency

POSTED

5 months ago

DEADLINE

N/A
View Details
NAICS: 213113
Closed
DIBBS
PIN, QUICK RELEASE
Solicitation # SPE4A6-26-T-59A7
ASC COMMODITIES DIVISION

POSTED

5 months ago

CLOSED

5 months ago
View Details
NAICS: 213113
Closed
Federal
53--STRAP,WEBBING
Solicitation # SPE7LX26U7365
DLA Land And Maritime

POSTED

6 months ago

CLOSED

5 months ago
View Details
NAICS: 213113
Closed
DIBBS
PIN, STRAIGHT, HEADLE
Solicitation # SPE4A6-26-T-50U2
ASC COMMODITIES DIVISION

POSTED

6 months ago

CLOSED

5 months ago
View Details
NAICS: 213113
Awarded
DIBBS
BEARING, SLEEVE
Solicitation # SPE4A6-26-T-47Q6
ASC COMMODITIES DIVISION

POSTED

6 months ago

CLOSED

6 months ago
View Details
NAICS: 213113
Closed
Federal
30--SHAFT,SHOULDERED
Solicitation # SPE7LX26U7032
DLA Land And Maritime

POSTED

6 months ago

CLOSED

5 months ago
View Details
NAICS: 213113
Awarded
DIBBS
BEARING, SLEEVE
Solicitation # SPE4A6-26-T-37H1
ASC COMMODITIES DIVISION

POSTED

6 months ago

CLOSED

6 months ago
View Details
NAICS: 213113
Closed
DIBBS
BEARING, SLEEVE
Solicitation # SPE4A6-26-T-34Z7
ASC COMMODITIES DIVISION

POSTED

6 months ago

CLOSED

6 months ago
View Details
NAICS: 213113
Awarded
DIBBS
PIN, QUICK RELEASE
Solicitation # SPE4A6-26-T-26E1
ASC COMMODITIES DIVISION

POSTED

6 months ago

CLOSED

6 months ago
View Details
NAICS: 213113
Awarded
DIBBS
BEARING, SLEEVE
Solicitation # SPE4A6-26-T-14B0
ASC COMMODITIES DIVISION

POSTED

6 months ago

CLOSED

6 months ago
View Details
NAICS: 213113
Awarded
DIBBS
PIN, STRAIGHT, HEADLE
Solicitation # SPE4A6-26-T-24J8
ASC COMMODITIES DIVISION

POSTED

6 months ago

CLOSED

6 months ago
View Details
NAICS: 213113
Awarded
DIBBS
BEARING, SLEEVE
Solicitation # SPE4A6-26-T-20M5
ASC COMMODITIES DIVISION

POSTED

7 months ago

CLOSED

6 months ago
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS