Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

316L Stainless Steel Tubing Supplier

Active

Federal

Response Deadline11/09/2026, 06:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract opportunity is for the supply of high-pressure, annealed seamless 316L stainless steel tubing to support prime contractors on Air Force Sustainment Center projects located at Tinker AFB. The required materials include tubing in 3/4 inch OD with 0.109 inch wall thickness, as well as 1/2 inch and 1/4 inch sizes. All delivered products must be certified and strictly adhere to ASTM A269 specifications and MIL-STD-129 marking and labeling standards. Managed by the Department of Defense under agency FA8126 Afsc Pzimb, this procurement is designated as a total Small Business Set Aside under NAICS code 331210. The solicitation was posted on November 2, 2026, with a response deadline of November 9, 2026. Performance for this contract is centered in the 73145 zip code area.

General Info

Small business subcontract for 316L stainless steel tubing supporting Air Force projects at Tinker.

Agency

Department Of Defense → FA8126 Afsc Pzimb

NAICS

331210 - Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

Place of Performance

0, OK, 73145, USA

Set-Aside

SBA

Documents

This scope was carved out of FA812627Q0004.

The full solicitation package (5 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

NITROGEN PIPING REPLACEMENT FOR PLASMA SPRAY BOOTH

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 2

subcontract

Response DeadlineNov 9

Submission deadline

Response Deadline

11/09/2026, 06:00:00 PM UTCin 7 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → FA8126 Afsc Pzimb

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → FA8126 Afsc Pzimb

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies high-pressure, annealed seamless stainless steel tubing for prime contractors on Air Force Sustainment Center projects at Tinker AFB. Provides 316L SS tubing, specifically 3/4" OD with 0.109" wall thickness, as well as 1/2" and 1/4" sizes. Materials must meet ASTM A269 and MIL-STD-129 marking and labeling standards. Delivers certified 316L Stainless Steel tubing.

Similar Contracts

Same NAICS industry code

Supply of Aluminum Alloy 7075 Rolled SheetsThis subcontract, issued by Construction & Equipment MRO SVC I for the Department of Defense, requires the supply of high-strength Aluminum Alloy 7075 rolled metal sheets to support DLA supply contracts. The materials must be produced using rolled fabrication with T-6 solution heat treatment to ensure a minimum tensile strength of 76,000 psi and a yield strength of 67,000 psi. Each sheet must adhere to strict dimensions of 48.000 inches in width, 12.000 feet in length, and 0.0160 inches in thickness, while complying with all DLA packaging and marking standards for delivery to designated destinations. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 331210, with the place of performance located at Robins Air Force Base. Interested parties must respond by November 13, 2026. This contract focuses on the precise manufacturing and delivery of aerospace-grade aluminum to meet rigorous military specifications.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 12 hours ago

DEADLINE

Supply of Aviation-Grade Raw Material for Angle BracketsThis subcontract involves the supply of certified aviation-grade raw metal stock for the production of angle brackets under the DLA Weapons Support SMSG Aviation Supply Chain. The provider is responsible for sourcing alloys that strictly adhere to Government Design Control Activity specifications and ensuring all materials are delivered directly to the fabricator. To maintain regulatory compliance, the supplier must provide Material Test Reports and Certificates of Conformance in accordance with DFARS Buy American Act requirements. The project is managed by the Department of Defense with the place of performance located at Tinker AFB.

DLA WEAPONS SUPPORT SMSG AVIATION SUP CH CORPORATE LTC

POSTED

about 12 hours ago

DEADLINE

Supply of Certified Aerospace Grade MaterialsThis subcontract involves the supply of certified aerospace-grade metals and alloys to support prime contractors for the DLA Weapons Support Aviation Supply Chain. The materials must strictly adhere to Lockheed Martin TDP specifications specifically for the Inner Skin-Hor Stab and must be accompanied by Mill Test Reports for all stock to ensure quality and certification. The contract requires full compliance with the Buy American Act and the Berry Amendment. Performance will take place at Robins Air Force Base, and the procurement falls under NAICS code 331210. Interested parties must respond by November 10, 2026.

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN

POSTED

about 12 hours ago

DEADLINE

STA 563.89 Metallic Tubing/Hose SupplyThis HUBZone set-aside subcontract involves the supply of raw metallic hose material for prime contractors supporting the Department of Defense DLA Weapons Support Fluid Handling Division. The contractor is responsible for providing metallic tubing that strictly adheres to the chemical and physical properties outlined in specification STA 563.89. All deliveries must be accompanied by Mill Test Reports to verify compliance with these technical specifications. The project is performed at Hill AFB and requires strict adherence to the Buy American Act as well as ITAR and EAR regulations. Interested parties must respond by November 13, 2026, under NAICS code 331210.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 12 hours ago

DEADLINE

Specialized Alloy Supply for Fluid AdaptersThis subcontract, titled Specialized Alloy Supply for Fluid Adapters, involves the provision of raw metal stock including bars, billets, or tubing for prime contractors supporting the DLA Weapons Support Fluid Handling Division. All materials must strictly adhere to the chemical and physical properties outlined in Basic Drawing NR 53711 7052719. To ensure quality and compliance, the supplier must provide Material Test Reports and Certificates of Conformance, guaranteeing that all delivered materials are of domestic origin, mercury-free, and manufactured without the use of Class I ozone-depleting chemicals. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 331210 and is managed by the Department of Defense. Performance for this contract will take place in Tracy, California. Interested parties must submit their responses by the deadline of November 13, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 12 hours ago

DEADLINE

Supply of Aluminum Alloy 2024 Sheets

Defense Logistics Agency

POSTED

about 12 hours ago

DEADLINE

Supply of Aerospace-Grade Metal TubingThis subcontract involves the supply of raw aerospace-grade metal tubing to prime contractors supporting DLA Weapons Support aviation supply contracts. The materials must strictly adhere to the chemical and physical specifications outlined in Drawing 77445 822837 and be delivered as certified raw metal stock. To ensure quality and compliance, the provider must maintain full material traceability through Mill Test Reports and operate in strict accordance with the Buy American Act and the Berry Amendment. The contract is managed under the Department of Defense for the DLA Weapons Support SMSG Aviation Supply Chain, with the place of performance located at Tinker AFB. Falling under NAICS code 331210, the solicitation was posted on November 2, 2026, with a response deadline of November 9, 2026.

DLA WEAPONS SUPPORT SMSG AVIATION SUP CH CORPORATE LTC

POSTED

about 12 hours ago

DEADLINE

Supply of Specialized Metal Sheets (NSN 9535002777423)This subcontract, issued by the Department of Defense under the Construction and Equipment MRO Service I agency, requires the supply of nine specialized metal sheets matching NSN 9535002777423. The project is designated as a Total Small Business Set-Aside under NAICS code 331210, with performance taking place in Tracy, California. The contractor is responsible for ensuring strict compliance with Metal Certification Contract Data Requirements Lists and the submission of DD Form 1423s. All materials must adhere to DLA packaging and quality assurance standards and be delivered through the First Destination Transportation program. The response deadline for this solicitation is November 13, 2026.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 12 hours ago

DEADLINE

Supply of Certified Aerospace Alloys (BMS Specifications)This subcontract, titled Supply of Certified Aerospace Alloys (BMS Specifications), involves the provision of raw materials for prime contractors working on DLA Weapons Support ASC projects for the Department of Defense. The scope of work requires the sourcing and certification of alloys according to specific Boeing Material Specifications, including BMS8-80, BMS8-11A, BMS9-3T, and BMS10-11. To ensure quality and compliance, the provider must deliver certified raw materials accompanied by mill test reports and maintain full material traceability documentation in accordance with C03 Contractor Retention of Supply Chain Traceability. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 331210. It was posted on November 2, 2026, with a response deadline of November 16, 2026. The contract is managed by the DLA Weapons Support ASC Supplier Oper AE and AF Div.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 12 hours ago

DEADLINE

Specialty Fastener Stock SupplyThis subcontract for the Defense Logistics Agency involves the sourcing and delivery of raw metal bar stock for prime contractors. The supplier is responsible for providing metallurgical alloys that strictly adhere to NSN 5320-01-316-1503 specifications. All delivered materials must be certified free of mercury or mercury compounds and must be accompanied by Material Test Reports or Certificates of Conformance to ensure quality and compliance. Strict adherence to federal procurement regulations is required, specifically the Berry Amendment for the domestic sourcing of specialty metals and the Buy American Act. The contract falls under NAICS code 331210 and is managed through the Department of Defense. Interested parties must meet the response deadline of November 10, 2026.

Defense Logistics Agency

POSTED

about 12 hours ago

DEADLINE

Specialized Metal Supply for Field RacksThis subcontract involves the supply of raw metals and pre-cut components for prime contractors working on Defense Logistics Agency Troop Support projects, specifically for the production of field racks. All materials must strictly adhere to the grades specified in Drawing NR 81337 and Drawing NR 81996. To ensure quality compliance with QAP 14153, the provider is required to furnish Mill Test Reports for all certified raw metal stock or semi-finished components delivered. In accordance with the Buy American Act, all supplied materials must be of domestic origin. This procurement falls under NAICS code 331210 and is managed through the Department of Defense. Interested parties should note the tight response window following the posting date of November 2, 2026.

Defense Logistics Agency

POSTED

about 12 hours ago

DEADLINE

Supply of Aerospace Structural Plate StockThis subcontract involves the supply of certified raw aerospace-grade metal plate stock to prime contractors supporting Department of Defense contracts through the DLA Weapons Support ASC Supplier Oper OEM Division. The material must strictly adhere to Boeing part number L3223818-012 specifications and requires the provision of Mill Test Reports to ensure full traceability. Performance for this contract will take place at Tinker AFB. To ensure regulatory compliance, all provided materials must meet the requirements of the Buy American Act and the Berry Amendment. The opportunity is categorized under NAICS code 331210.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 12 hours ago

DEADLINE

More opportunities from Department Of Defense → FA8126 Afsc Pzimb

Same awarding agency

High-Pressure Nitrogen Piping ContractorThis subcontract opportunity is for a Small Business Set Aside to perform demolition and installation of high-pressure nitrogen gas piping for the Air Force Sustainment Center at Tinker AFB. The selected contractor will be responsible for removing unserviceable piping and installing 316 Stainless Steel lines to connect generators, storage cylinders, and plasma spray booths in accordance with drawing 24E173. The project requires strict adherence to ASME B31.3 standards to deliver a certified, leak-free piping system. A critical component of the scope of work includes conducting hydrostatic pressure testing up to 7,500 psi. This effort falls under NAICS code 238220 and is managed by the Department of Defense.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

about 17 hours ago

DEADLINE

NITROGEN PIPING REPLACEMENT FOR PLASMA SPRAY BOOTH

Solicitation # FA812627Q0004

Solicitation FA812627Q0004 is a request for quote issued by the Air Force Sustainment Center at Tinker Air Force Base, Oklahoma, for the replacement and installation of a 5,000 psi nitrogen gas piping system in Building 3001. The project requires the contractor to provide all labor, materials, and expertise to demolish existing unserviceable piping and install a new high-pressure system using 316L stainless steel annealed seamless tubing. The system must connect the nitrogen generator, storage cylinders, regulator, and plasma spray booth in strict accordance with government drawing 24E173 and ASME B31.3 standards. A critical performance requirement includes hydrostatic pressure testing of the new piping up to 7,500 psi to ensure a leak-free installation. This is a 100% Small Business Set-Aside contract with a ten percent price evaluation preference for HUBZone small business concerns. The government intends to award a single purchase order to the responsible vendor offering the lowest price that meets all technical specifications. The period of performance is 60 days after receipt of award. Contractors must comply with stringent marking and labeling requirements, including MIL-STD-129 for uniquely identified items and OSHA-compliant HAZMAT labeling. Final acceptance is contingent upon the submission and approval of a project schedule, material specifications, hydrostatic test results, and personnel certifications. Invoicing and payments will be processed electronically through the Wide Area WorkFlow system.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

about 17 hours ago

DEADLINE

Trumpf/Pilz OEM Replacement Parts SupplierThis subcontract involves the supply of Original Equipment Manufacturer components for prime contractors supporting Air Force Sustainment Center projects. The scope specifically requires the sourcing of Trumpf interface components and Pilz safety modules in accordance with established TT&E reports, with all certified parts to be delivered to Tinker AFB. The agreement mandates strict adherence to military standards, specifically MIL-STD-130 for unique item identification and MIL-STD-129 for packaging and shipment labeling. Managed under NAICS code 423830 for the Department of Defense, the contract ensures that all critical safety and interface hardware meets rigorous government specifications for sustainment operations.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

DEADLINE

Pilz Safety Controller Reprogramming ServicesThis subcontract for Pilz Safety Controller Reprogramming Services supports prime contractors on Air Force Sustainment Center projects under the Department of Defense. The scope of work involves the specialized programming and configuration of integrated Pilz safety controllers, specifically focusing on validation and integration with Trumpf TrumaBend V170X hardware. Key technical requirements include conducting Test, Teardown, and Evaluation (TT&E) and the recovery of lost original programs using proprietary Pilz software. The selected provider must ensure strict adherence to DFARS 252.204-7012 compliance standards. Final deliverables for the project consist of a fully programmed controller and a comprehensive TT&E evaluation report. The opportunity is categorized under NAICS code 811210, with a response deadline of November 6, 2026.

Electronic and Precision Equipment Repair and Maintenance

POSTED

DEADLINE

Trumpf Pilz Programming Service

Solicitation # FA812627Q0003

The Air Force Sustainment Center at Tinker Air Force Base, Oklahoma, is seeking a Firm-Fixed-Price contract for a one-time programming service to reprogram and configure the integrated Pilz safety controller for a Trumpf TrumaBend V170X, serial number B0105A0093. The contractor is required to perform Test, Teardown, and Evaluation on the part and submit an evaluation report to the government within one business day. The period of performance for this service is scheduled from November 15, 2026, to November 14, 2027. Award decisions will be based on a technical proposal and cost/price evaluation, with a 10 percent price preference granted to HUBZone small business concerns. The contractor must comply with strict packaging and marking standards, including MIL-STD-130 for unique item identification and MIL-STD-129 for shipment labeling. Additionally, the contractor must adhere to cybersecurity reporting under DFARS 252.204-7012 and provide all necessary quality control and inspection manuals. Invoicing and payment will be processed electronically through the Wide Area WorkFlow system.

Electronic and Precision Equipment Repair and Maintenance

POSTED

DEADLINE

Independent Calibration & Certification Services (Future Potential)The contract pertains to independent calibration and performance certification of electron microscopes using traceable standards, intended for potential future use should the government elect to pursue depot-level maintenance or open the requirement to competition. This service is critical to ensuring the accuracy and reliability of electron microscope operations, with all calibrations tied to nationally or internationally recognized traceable standards to guarantee measurement integrity. The work is linked to a NAICS code of 541380, indicating it falls under scientific and technical consulting services, and is managed by the Department of Defense under the office FA8126 Afsc Pzimb, with performance expected to occur in the 73145 zip code area. Although currently listed as a subcontract opportunity with no solicitation number or set-aside details, it remains a pending requirement that may be activated based on future maintenance strategies or competitive bidding decisions.

Testing Laboratories and Services

POSTED

DEADLINE

On-Site Technical Support for Precision Laboratory InstrumentsThe contract is for on-site technical support services focused on high-maintenance scientific instruments located at government facilities, with a primary emphasis on emergency repairs, troubleshooting, and performance validation. Services are required to be provided on-call and in-person to ensure continuous operational readiness of precision laboratory equipment critical to defense-related research and testing activities. The work is governed under NAICS code 541715, indicating it falls under scientific research and development services, and is structured as a subcontract within the broader framework of the Department of Defense’s procurement system. The place of performance is identified as a facility in Oklahoma City, Oklahoma, with a ZIP code of 73145, suggesting the support must be delivered directly at that location. The contract was posted on July 28, 2026, and is managed under the FA8126 Afsc Pzimb office, indicating oversight by a U.S. Air Force contracting entity. While no solicitation number is provided, the UI link directs to the SAM.gov portal for official documentation and submission purposes. The requirement implies a high degree of technical expertise, rapid response capability, and clearance to work in secure government environments. There is no set-aside designation specified, meaning participation is open to all qualified contractors without restrictions based on size or socioeconomic status. All support must meet stringent standards for instrument accuracy, safety, and uptime to sustain mission-critical operations.

Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

DEADLINE

High-Precision Diagnostic Equipment Parts SupplyThe contract entails the supply of authentic, JEOL-certified replacement and maintenance parts for the JSM-IT300LV scanning electron microscope, covering critical components such as electron optics, vacuum seals, detectors, and control boards, ensuring continued operational integrity and performance fidelity. All parts must meet stringent quality and authenticity standards as validated by JEOL, with delivery and installation aligned to support uninterrupted use in high-precision diagnostic applications. Performance is required at a location with ZIP code 73145, under the oversight of the Department of Defense’s FA8126 Afsc Pzimb office, and the contract is classified as a subcontract within the NAICS code 334517 for other electronic instrument manufacturing. The posting date indicates the opportunity was issued in 2026, and though no solicitation number is provided, the official listing can be accessed through the SAM.gov platform via the specified URI. The agreement emphasizes compliance with certified OEM specifications to maintain system calibration, safety, and resolution standards critical to defense-related research and analysis.

Irradiation Apparatus Manufacturing

POSTED

DEADLINE

OEM Preventative Maintenance & Calibration ServicesThe contract entails biannual on-site preventative maintenance and calibration services for a JEOL JSM-IT300LV scanning electron microscope, performed using proprietary tools, specialized software, and authentic original equipment manufacturer parts to guarantee optimal performance, measurement accuracy, and long-term reliability. All service activities must be conducted at the designated location in Oklahoma City, with a zip code of 73145, ensuring minimal downtime and uninterrupted operational readiness for critical applications. Services are provided under a subcontract classification within the NAICS code 811210, which pertains to electronic equipment repair and maintenance, and are managed by the Department of Defense through the FA8126 Afsc Pzimb office. The work is scheduled to occur twice per year on a fixed cycle, with compliance and quality control ensured through adherence to manufacturer-specified protocols and the exclusive use of OEM components. The contract was posted on July 28, 2026, and all servicing must align with the technical requirements specified by the equipment manufacturer to maintain system precision and warranty integrity.

Electronic and Precision Equipment Repair and Maintenance

POSTED

DEADLINE

Technical Documentation and Reporting ServicesThis contract, titled Technical Documentation and Reporting Services, is a small business set-aside subcontract under the SBA Total Small Business Set-Aside program, with a NAICS code of 541611 for Management Consulting Services. The work involves preparing and submitting detailed service reports, compliance documentation, and certified technician credentials, while also managing electronic invoicing through the Wide Area Workflow system and maintaining complete, audit-ready records to ensure full regulatory adherence. Performance is required at the location in Coffeyville, Kansas, with a zip code of 73145, and the contract is associated with the Department of Defense, specifically under the agency identifier FA8126 Afsc Pzimb. The opportunity was posted on July 28, 2026, and bidders must be designated as small businesses to qualify, with all submissions and recordkeeping expectations aligned with federal compliance standards.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Supply of OEM Replacement Parts for SEMThe contract is a total small business set-aside under the SBA program for the supply of genuine JEOL or approved-equivalent replacement components essential for the maintenance of scanning electron microscopes. It covers a broad range of parts including filaments, detectors, gaskets, vacuum pumps, control boards, and associated software licenses, ensuring uninterrupted operational capability of SEM equipment. The procurement is classified under NAICS code 423490 and is designated as a subcontract, indicating it supports a larger prime contract or program. Performance of the contract is required at a location in Coffeyville, Kansas, with a zip code of 73145, and the responsible agency is the Department of Defense under the FA8126 Afsc Pzimb office. Although specific details such as contract value, duration, or point of contact are not provided, the posting date of July 28, 2026, suggests this is a future solicitation with a focus on securing reliable, certified components from small business suppliers. The intent is to maintain the integrity and performance of critical defense-related SEM systems through genuine or equivalent replacement parts, ensuring compliance with technical and supply chain requirements.

Other Professional Equipment and Supplies Merchant Wholesalers

POSTED

DEADLINE

Preventative Maintenance Services for Scanning Electron Microscope (SEM)The contract engages a qualified vendor to perform two annual preventative maintenance service calls on a JEOL JSM-IT300LV Scanning Electron Microscope, ensuring optimal performance and prolonged equipment lifespan. Each service visit includes a comprehensive inspection, precise calibration, thorough cleaning, component testing, replacement of any worn or degraded parts, and full operational verification to confirm the instrument meets all manufacturer specifications. These services are critical for maintaining the accuracy, resolution, and reliability of the SEM, which supports key scientific and technical operations. The contract is structured as a subcontract under a Total Small Business Set-Aside classification, reserved exclusively for small businesses as defined by the SBA, and falls under NAICS code 811212 for industrial and commercial machinery and equipment repair and maintenance. It is issued by the Department of Defense through the FA8126 Afsc Pzimb office, with performance required at the location in Coffeyville, Oklahoma, ZIP 73145. The solicitation was posted on July 28, 2026, and all work must be conducted in compliance with federal contracting standards, emphasizing quality, timeliness, and adherence to technical protocols outlined for the specific SEM model.

Computer and Office Machine Repair and Maintenance

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS