Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

HOUSING, CENTRIFUGAL

Active
SPE4A5-26-T-322SFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of a centrifugal fan housing identified as a commercial item, with part number 3386410-1 and NSN 4140-01-346-5350, under solicitation SPE4A5-26-T-322S. A total of 22 units are required to be delivered FOB origin within 336 days of contract award, with zero tolerance for quantity variance and inspection and acceptance to occur at the destination. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951. Packaging must comply with MIL-STD-129 and DLA Packaging Requirements for Procurement, while item marking follows RQ017 for bare item identification, though Unique Item Identification is not required per the service customer’s request. Sampling inspections must adhere to MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required unless otherwise specified, and critical attributes are subject to the most stringent verification levels. The item is designated as a critical application, and all documentation must meet Source Approval Request and Measuring and Test Equipment requirements. Delivery is directed to DLA Distribution Cherry Point in North Carolina, with a required ship date of January 26, 2026, and an original delivery deadline of April 25, 2028. The contract is managed by the Department of Defense’s ASC Supplier OEM Division, with primary contact information provided for inquiries.

General Info

DLA Aviation seeks 22 centrifugal housings for delivery within 336 days via SAM.gov, electronic quotes due August 12, 2026.

Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISIONView Agency

NAICS

333413 - Industrial and Commercial Fan and Blower and Air Purification Equipment ManufacturingView NAICS

Place of Performance

PHANTOM RD BLDG 147 BAY A, CHERRY POINT, NC, 28533-5040, US

Set-Aside

NONE

Documents

(1)

SPE4A5-26-T-322S.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Combined Synopsis

Type Changed

Combined Synopsis → Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER OEM DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER OEM DIVISION
View Agency Profile
Office AddressUS
Contacts
FRANCIS POLAKIEWICZ
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
HOUSING,CENTRIFUGAL
HOUSING, CENTRIFUGAL FAN
THIS ITEM IS IDENTIFIED AS A COMMERCIAL ITEM (TO INCLUDE 'COMMERCIAL
OF A TYPE')
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RT001: MEASURING AND TEST EQUIPMENT
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
CRITICAL APPLICATION ITEM
HAMILTON SUNDSTRAND CORPORATION 73030 P/N 3386410-1
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
SPE4A5-26-T-322S
SECTION B
PR: 7017741908 PRLI: 0001 CONT’D
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017741908 0001 EA 22.000
NSN/MATERIAL:4140013465350
DELIVERY (IN DAYS):0336
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3113
DLA DISTRIBUTION CHERRY POINT
PHANTOM RD BLDG 147 BAY A
CHERRY POINT NC 28533-5040
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3113
DLA DISTRIBUTION CHERRY POINT
PHANTOM RD BLDG 147 BAY A
CHERRY POINT NC 28533-5040
US
Need Ship Date:01/26/2026 Original Required Delivery Date:04/25/2028
SPE4A5-26-T-322S NSN/Part Number: 4140-01-346-5350 Quantity: 22 EA Purchase Request: 7017741908QTY: 22 Delivery: 336 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 333413
New
DIBBS
FAN, CENTRIFUGAL
Solicitation # SPE8E9-26-T-3281
The contract is for the procurement of one centrifugal fan identified by NSN 4140-01-299-6712 and purchase request 7017646416, with a total quantity of one unit to be delivered within 20 days to the USS GEORGE WASHINGTON CVN 73 at FPO AP 96607 under FOB destination terms. The item must comply with DLA packaging requirements per MIL-STD-2073-1E and marking standards per MIL-STD-129, with no special marking required. Packaging must adhere to specified methods including preservation type 10, dry storage, and containment using unit containers marked with packaging code U. Mercury and mercury compounds are strictly prohibited from direct contact with the fan or its components, except in exempted cases such as batteries, fluorescent lamps, and specified instruments, provided these contain a secondary containment meeting NAVSEA 5100-003D standards. The contract falls under a total small business set-aside with NAICS code 333413, and the solicitation number is SPE8E9-26-T-3281, issued by the Department of Defense’s Construction & Equipment MRO Service I. The required delivery date is January 20, 2026, and all shipments must follow DLAD procedures C19 and C20 for transportation. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date as applicable.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 5 hours ago

DEADLINE

in 13 days
View Details
NAICS: 333413
New
Federal
BOAST RFOP - Centrifugal Fan - NSN: 4140-00-895-3417
Solicitation # PANDTA_26_P_0000_032254
The U.S. Army Contracting Command – Detroit Arsenal is conducting market research through a Sources Sought Notice to assess industry capabilities for the potential future procurement of 220 centrifugal fans with NSN 4140-00-895-3417, with an additional 220 units available under a 100% option quantity. This effort is classified as a Total Small Business Set-Aside under FAR 19.5, requiring all responding vendors to certify their small business status through SAM.gov and comply with the SBA’s nonmanufacturer rule, which mandates that small businesses either manufacture the product themselves, supply a product made by another small business, or hold an SBA waiver. The procurement is intended to be conducted through the BOAST Program, and contractors not currently approved under BOAST are directed to reference W912CH-26-R-0001 on SAM.gov. Responses must include a comprehensive vendor profile with company name, mailing address, CAGE code, point of contact details, and website, and must be submitted via email to the designated contracting specialist no later than June 29, 2026, at 1:30 PM EST. Information requested includes production lead time, sustainable monthly production rates, proposed production location, and commercial availability of the item. All proprietary information must be clearly marked with “PROPRIETARY INFORMATION CONTAINED WITHIN” on the cover and restricted legends such as “CONFIDENTIAL,” “CONFIDENTIAL DATA BEGINS,” and “CONFIDENTIAL PORTION ENDS” for electronic files, with a release statement permitting distribution to Army personnel. Participation is strictly voluntary, and the government retains no obligation to proceed with a solicitation or contract award based on responses. The place of performance is Warren, Michigan, and the NAICS code applicable to this effort is 333413 for industrial and commercial fan and blower manufacturing. Submission formats must be in .doc, .docx, or .pdf, and responses must be sent with the exact subject line specified.
W6QK Acc- Dta

POSTED

about 10 hours ago

DEADLINE

in 30 days
View Details
NAICS: 333413
New
Federal
FAN,VANEAXIAL
Solicitation # SPRPA126QWB45
This contract issued under EAF authority with a waived synopsis due to urgency solicits a Vaneaxial Fan under solicitation number SPRPA126QWB45, with a response deadline of August 14, 2026. It is classified as a Critical Safety Item requiring strict compliance with DFARS clause 252.209-7010 for identification and associated procurement controls. The contract incorporates multiple mandatory clauses including fixed-price inspection requirements, a 12-month warranty with 45-day defect discovery window, Buy American Act certifications, and compliance with the Value Engineering and Integrity of Unit Prices provisions. Delivery and shipping follow FMS instructions directed to Daniel A. Heckler, and payment must adhere to the Wide Area Workflow Invoice and Receiving Report combo system. The item falls under NAICS 333413 and is procured by the Department of Defense via the DLA Aviation office in Philadelphia, Pennsylvania. The contract enforces strict quality standards requiring AS/EN/JISQ 91000 or equivalent certification, and includes mandatory use of Workflow Pro's Assist Module for compliance tracking. Security prohibitions and exclusion requirements from a February 2026 deviation apply, alongside provisions for Equal Opportunity for Veterans and Workers with Disabilities. Transportation by sea is permitted, and recovered material content reporting is required per EPA guidelines. A priority rating notice under national defense programs binds the contractor, and an annual representations and certifications deviation applies. The solicitation includes royalty information obligations and incorporates Procurement Note E05 and Contractor Business Systems clauses as applicable. All pricing and performance must align with the fixed-price structure, and the offeror’s information is subject to release under FMS protocols.
Pa DLA Aviation At Philadelphia

POSTED

about 10 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333413
New
DIBBS
IMPELLER, FAN, CENTRI
Solicitation # SPE8E7-26-T-3453
The contract pertains to the procurement of a centrifugal fan impeller with part number 7733403 and NSN 4140013260996, issued under solicitation SPE8E7-26-T-3453 by the Department of Defense through the DLA Distribution facility in New Cumberland, Pennsylvania. A total of 36 units are required at a unit price of $36.00, with a total contract value of $1,296.00, and delivery is mandated within 71 days of contract award, FOB origin. The item must be packaged in strict accordance with MIL-STD-2073-1E, marked per MIL-STD-129, and labeled with no special marking codes. All supplies must comply with DLA’s Master List of Technical and Quality Requirements, and mercury or mercury-containing compounds are strictly prohibited except in specific functional applications such as batteries, fluorescent lamps, sensors, or weapon systems, which must include a secondary containment as per NAVSEA 5100-003D. The inspection and acceptance points are both designated at the destination, and no quantity variance is permitted. Transportation and shipping instructions are governed by DLAD Procurement Notes C19 and C20, with the delivery address confirmed as the DLA Distribution facility in New Cumberland, PA. The solicitation was posted on August 3, 2026, with responses due by August 14, 2026, under NAICS code 333413 for industrial fan and blower manufacturing.
DDSP NEW CUMBERLAND FACILITY

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 333413
New
DIBBS
FAN, CENTRIFUGAL
Solicitation # SPE8E7-26-T-3367
The contract calls for the delivery of three centrifugal fans identified by NSN 4140016192919 and part number 5000028, issued under solicitation SPE8E7-26-T-3367 by the Defense Logistics Agency. Delivery is required within 10 days of the issuance of the delivery order to the designated destination at Camp Darby, Pisa, Italy, with FOB Origin terms placing transportation responsibility and risk on the government once goods leave the contractor’s facility. The contract mandates strict compliance with DLA Master List of Technical and Quality Requirements, which supersedes all other standards including ASTM D3951 for packaging, and requires all packaging and labeling to conform to MIL-STD-129, including barcoding and hazardous material markings consistent with OSHA’s Hazard Communication Standard. Palletization must follow RP001 DLA Packaging Requirements, and government identification must be removed from non-accepted supplies. Inspection and acceptance occur at the destination point, and electronic invoicing must be submitted through WAWF. The contract includes numerous FAR and DFARS clauses covering safeguarding covered defense information, combating trafficking in persons, employment verification, sustainable products, hazardous material handling, export controls, cybersecurity, and prohibitions on acquiring certain telecommunications equipment or services from restricted entities. Offerors must provide accurate entity identifiers and disclose any covered defense telecommunications equipment or services, and small business representations are required under applicable clauses. No pricing is listed in the contract, and the award method or evaluation factors are not specified. All submissions must be made electronically through DIBBS by the deadline, and compliance with all referenced standards and regulatory requirements is mandatory for contract acceptance.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

in 2 days
View Details
NAICS: 333413
New
DIBBS
COOLER, COMPRESSED AIR,
Solicitation # SPE7M1-26-Q-1327
The contract requires the procurement of four units of a cooler, compressed air, compressor with NSN 4310-01-356-8696 under solicitation SPE7M1-26-Q-1327, issued by the Department of Defense through the Maritime Supply Chain. The item is classified as a critical application item and must adhere to all DLA packaging requirements, including MIL-STD-2073-1E standards for preservation, packaging, and marking in compliance with MIL-STD-129. No special markings are required, and palletization must follow DLA’s procedural guidelines. The contract enforces a firm fixed price with zero variance allowed in quantity, and delivery must occur within 100 days after award date with FOB origin terms. Inspection and acceptance occur at the destination, specifically at the designated receiving warehouse in Tracy, California. The supply is subject to strict prohibitions regarding mercury or mercury-containing compounds, which cannot be intentionally added or come in direct contact with the item, except in limited functional cases such as batteries, fluorescent lamps, sensors, or instruments specified by NAVSEA, provided they include double containment and are shockproof as per NAVSEA 5100-003D. All technical and quality requirements referenced through R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. The item is to be shipped to the government’s designated freight and parcel post address, and transport protocols follow DLAD procedural notes C19 and C20. The required delivery date is August 6, 2027, and the purchase request number is 7017226197.
MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 3 days
View Details
NAICS: 333413
New
DIBBS
FAN, TUBEAXIAL
Solicitation # SPE8E7-26-T-3452
The contract is for the procurement of two tubeaxial fans identified by NSN 4140-01-685-6531 and part number 44-12-DD3 from HARTZELL FAN, INC. The item must be delivered within five days of award, with delivery terms set at FOB origin and zero tolerance for quantity variance. Inspection and acceptance occur at the destination, and all packaging must comply with ASTM D3951 unless superseded by the DLA Master List of Technical and Quality Requirements, which take precedence. Packaging and labeling must adhere to MIL-STD-129, and palletization must follow DLA’s RP001 packaging requirements. The goods must be shipped by the fastest traceable method, excluding parcel post, to the designated delivery point at Fort Eustis, Virginia. The contracted quantity is two units at a total price of $2.00 per unit. The contract number is SPE8E7-26-T-3452, with a required delivery date of August 8, 2025, and all provisions are governed by the DLA’s current master list of technical and quality standards in effect on the solicitation issue date. Marking and documentation must include the government-provided mailing and shipping identifiers, and government-use-only codes are embedded for internal tracking.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 333413
New
DIBBS
FAN
Solicitation # SPE8E7-26-T-3374
The contract solicitation SPE8E7-26-T-3374 issues a requirement for five centrifugal fans, identified by NSN 4140008420520 and part numbers 15A4416-1 and C7Z15G-10CC, sourced from Ashland Electric Products Inc, with a total contract value of $25.00. Delivery is set for 93 days after order placement to the DLA Distribution facility in New Cumberland, Pennsylvania, under FOB Origin terms, meaning risk and title transfer to the Government upon delivery to the carrier. Inspection and acceptance occur at the destination, with packaging strictly adhering to MIL-STD-2073-1E using dry preservation methods and no preservation materials, while labeling and marking must comply with MIL-STD-129, including standardized barcoding and no special markings. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced online, with applicable revisions controlled by the solicitation issue date. The contract incorporates numerous FAR and DFARS clauses addressing cybersecurity safeguards, trafficking in persons, employment eligibility, sustainable products, hazardous materials, whistleblower rights, electronic invoicing via WAWF, and NIST SP 800-171 compliance, with specific DFARS clauses mandating the safeguarding of covered defense information and prohibiting acquisition of certain telecommunications equipment. Offerors must provide current UEI and CAGE codes, affirm size status and socioeconomic certifications in SAM, and disclose any involvement with covered defense telecommunications equipment or services. No evaluation factors or source selection criteria are stated, and the contract type remains to be determined by the Contracting Officer upon award. Submission of quotes is mandatory via the DLA Internet Bid Board System by the specified deadline, with no hardcopy or alternative submission methods permitted.
DDSP NEW CUMBERLAND FACILITY

POSTED

1 day ago

DEADLINE

in 2 days
View Details
NAICS: 333413
New
Federal
POWER BREEZER PB4MAX/ FANS
Solicitation # W911S226U3886
The contract is for the procurement of ten POWER BREEZER PB4MAX Portable misting coolers, classified as mission-critical goods essential for life, health, and safety. It was issued under solicitation number W911S226U3886 with a combined solicitation type and is set aside exclusively for small businesses under the SBA program. The North American Industry Classification System code is 333413, indicating the procurement falls under the manufacturing of air conditioning and refrigeration equipment. The contract is managed by the Department of Defense through the W6QM Micc-Ft Drum office located in Fort Drum, New York, with performance expected at a location with ZIP code 30905. The solicitation was posted on August 3, 2026, with responses due by 2:00 PM Eastern Time on August 5, 2026. Primary point of contact for inquiries is Shakela Williams, reachable via email at shakela.d.williams.civ@army.mil or by phone at 706-791-6988. The contract details are accessible through the SAM.gov portal, and the issuance reflects a focused effort to procure reliable cooling equipment critical to sustaining operational readiness and personnel welfare in high-temperature environments.
W6QM Micc-Ft Drum

POSTED

1 day ago

DEADLINE

in about 16 hours
View Details
NAICS: 333413
New
DIBBS
FAN, VANEAXIAL
Solicitation # SPE8E7-26-T-3446
A single axial vane fan, identified by NSN 4140-01-481-7645 and part number B3725-1, is being procured under solicitation SPE8E7-26-T-3446 for a total quantity of one unit, with a required delivery within five days of award. The contract is a total small business set-aside under NAICS code 333413, and all technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, incorporating referenced R and I numbers. Packaging must comply with MIL-STD-2073-1E and DLA Packaging Requirements, including marking per MIL-STD-129 with no special labeling, and palletization as specified under RP001. Delivery is FOB origin, with inspection and acceptance occurring at the destination, and no quantity variance is allowed. The shipment must be sent by the fastest traceable means, explicitly excluding parcel post, to the designated DLA Distribution Norfolk RMC Proj address in Norfolk, Virginia. The unit of issue is each, with a price of one dollar per unit, and the contract mandates compliance with all applicable federal acquisition regulations and documentation standards as defined by the DLA. The required delivery date is April 14, 2025, and the point of contact for the procurement is Kelly Mitchell, with additional government use identifiers and shipping codes applied for logistics tracking and administrative purposes.
NORFOLK RMC PROJ BUNKER HILL TOWAWAY BLDG X136 MR CUNNINGHAM

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 333413
New
DIBBS
FILTER UNIT, AIR PUR
Solicitation # SPE8E8-26-T-4936
The contract is for the procurement of two air filter units under solicitation SPE8E8-26-T-4936 issued by the Defense Logistics Agency, with a total contract value of $2.00. Delivery is required within 20 days after award, with the original delivery date set for July 29, 2026, and the goods must be shipped FOB origin to Fort Carson, Colorado, with inspection and acceptance occurring at the destination. All packaging must comply with ASTM D3951 and be marked and labeled in strict accordance with MIL-STD-129, including barcoding, unit of issue, and quantity per unit pack as specified, while palletization must follow DLA’s RP001 packaging requirements, which take precedence over any industry standards. The DLA Master List of Technical and Quality Requirements governs all technical and quality specifications and supersedes other standards. The items must be shipped via traceable means, excluding parcel post, and invoicing is to be performed exclusively through the Wide Area WorkFlow system using approved document types such as invoices and receiving reports. The contract incorporates numerous FAR and DFARS clauses addressing equal opportunity, combating trafficking, employment eligibility verification, sustainable products, hazardous materials identification, cybersecurity compliance including NIST SP 800-171, subcontracting for commercial items, and whistleblower protections, many with approved deviations. Offerors must provide accurate Unique Entity ID and CAGE codes if supplying covered defense telecommunications equipment or services and must certify their small business status and socioeconomic designations. The solicitations are evaluated on a likely lowest price technically acceptable basis, though formal evaluation factors are not detailed. No option periods or additional quantities are included, and proposals must be submitted electronically through the DLA Internet Bid Board System by the August 14, 2026 deadline, with no hardcopy submissions accepted.
Defense Logistics Agency

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 333413
New
DIBBS
FAN, CENTRIFUGAL
Solicitation # SPE8E7-26-T-3450
The contract solicitation SPE8E7-26-T-3450 is for the procurement of one centrifugal fan with specifications tied to 440 volts, 3-phase, 60-cycle electrical requirements, and is governed by a comprehensive set of military and federal standards. The item is identified by NSN 4140-00-289-4304 and requires strict compliance with MIL-STD-130N for unique item identification and barcoding, MIL-STD-2073-1E for packaging and preservation, and MIL-STD-129 for shipment labeling. Inspection and acceptance occur at the origin, with the contractor responsible for conducting first article testing and submitting detailed test reports at least 14 days prior to shipment. The fan is subject to export control under ITAR or EAR due to technical data restrictions, and access to such data is limited to contractors with approved U.S./Canada Joint Certification Program status, completed DLA export control training, and official authorization. Cybersecurity requirements mandate CMMC Level 2 certification for third-party assessors and compliance with NIST SP 800-171 for safeguarding covered defense information, alongside mandatory adherence to DFARS 252.204-7012 for cyber incident reporting. The contract enforces the use of WAWF for invoicing and payment processing and prohibits the use of certain plastics in packaging unless authorized, with preservation methods limited to cleaning and drying per QUP:001 PRES MTHD:50. All deliveries are FOB origin, with a 337-day delivery schedule, and the contractor must maintain accurate representation of small business status and socioeconomic certifications through SAM.gov, including disclosure of joint ventures, CAGE codes, and UEIs if applicable. The solicitation applies deviations to multiple FAR and DFARS clauses, including those on trafficking in persons, sustainable products, electronic submission maintenance, and subcontracting, while also requiring hazard communication compliance per OSHA and other federal laws. The contract does not specify pricing, contract type, or evaluation factors, and all pricing and award determination are left to offeror submission through the DIBBS portal by the deadline of August 13, 2026, with contact routed through Kelly Mitchell of the Defense Logistics Agency.
PUGET SOUND

POSTED

2 days ago

DEADLINE

in 9 days
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

Same awarding agency

NAICS: 332119
New
DIBBS
BUSHING, SLEEVE
Solicitation # SPE4A5-26-T-328Q
The contract is for the procurement of two BUSHING, SLEEVE items with NSN 5365-01-729-5733 and part number BACB28AP12Z059, issued under solicitation SPE4A5-26-T-328Q. Delivery is required within 127 days to the DLA Distribution facility in New Cumberland, Pennsylvania, with FOB origin terms and no variance allowed in quantity. The item is classified as a critical application component for Boeing and must comply with stringent technical and quality requirements referenced from the DLA Master List, including configuration change management, supply chain traceability per DLA Procurement Note C03, and FAA-specific provisions such as bare item marking and airworthiness certification. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129, with preservation methods specified for dry conditioning and no special marking required. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances mandated unless otherwise stated, and attributes are assigned verification levels or AQLs based on criticality. The supplier must retain supply chain documentation and ensure all materials meet FAA airworthiness standards, as outlined in DFARS 252.211-7003, despite the absence of unique identification requirements. Transportation and shipping logistics are governed by DLA Procurement Notes C19 and C20, and all documentation must align with the Technical Data Package and associated Contract Data Requirements Lists. The item is subject to the DLA Packaging Requirements and must be delivered on or before December 18, 2026. The contract includes mandatory compliance with quality assurance provisions, and nonconforming supplies must be processed per RQ011 guidelines regarding removal of government identification. All technical specifications referenced are incorporated by link to the DLA eProcurement portal, and the procurement is conducted under the DoD-authorized unit of issue with a unit price and total price specified for the two-piece order.
Metal Crown, Closure, and Other Metal Stamping (except Automotive)

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332999
New
DIBBS
SHIM
Solicitation # SPE4A5-26-T-323P
The contract pertains to the procurement of five units of a specific shim identified by NSN 5365-01-493-6230 and part number 212-011-731-101, supplied by BELL TEXTRON INC with CAGE code 97499. Delivery is required FOB origin within 171 days of contract award, with no tolerance for quantity variance. Inspection and acceptance both occur at the destination facility. Packaging must comply with MIL-STD-2073-1E, including specified preservation methods, materials, and unit containers, while marking adheres strictly to MIL-STD-129 and DLA packaging requirements, with no special marking codes applied. Unit identification is not required per customer request under DFARS 252.211-7003(c)(1)(i). Acceptable sampling follows Sikorsky Corporation’s Alternate Sampling Plan QAP 1201, which must meet or exceed ASQ H1331 or MIL-STD-1916 standards. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, with the same address used for freight shipping. The required ship date is January 31, 2027, with an original delivery requirement of October 15, 2027. Technical and quality requirements referenced are governed by the DLA Master List, with applicable revisions determined by the solicitation or award date depending on acquisition scale. The contract is issued under solicitation SPE4A5-26-T-323P, with a unit price of $5.00 per piece for a total value of $25.00.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332618
New
DIBBS
WIRE ROPE ASSEMBLY,
Solicitation # SPE4A5-26-T-325N
The contract is for the procurement of 20 single-leg wire rope assemblies with NSN 4010-01-611-5048 and part number 6898106-107, supplied by Mazzeolla Lifting Technologies, Inc. Delivery is required FOB origin within 171 days, with no tolerance for quantity variance, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, and marking must adhere to MIL-STD-129 without any special codes. Palletization follows DLA standards, and preservation methods are strictly controlled with no mercury or mercury-containing compounds permitted in preservation, packaging, or marking materials. The item must meet all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with sampling governed by MIL-STD-1916 or ASQ H1331, applying zero non-conformances unless otherwise stipulated. Mercury is prohibited except in specified exempted applications such as batteries, fluorescent lights, and certain instruments, with portable mercury-containing devices requiring shockproof design and a secondary containment barrier. All deliveries must be sent to the DLA Distribution facility in New Cumberland, PA, and the contract is subject to transportation guidelines outlined in DLAD Proc Notes C19 and C20. The original required delivery date is May 30, 2027, with a needed ship date of January 31, 2027. The solicitation, issued under SPE4A5-26-T-325N, was posted August 4, 2026, with a response deadline of August 12, 2026, and falls under NAICS code 332618 as a federal procurement managed by the Department of Defense’s ASC Supplier Oper OEM Division.
Other Fabricated Wire Product Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
STAKE, GUY
Solicitation # SPE4A5-26-T-326K
STAKE, GUY is a procurement contract issued by the Department of Defense through the ASC SUPPLIER OPER OEM DIVISION under solicitation number SPE4A5-26-T-326K, requiring delivery of 67 units of item NSN 4030-01-710-7034 with a unit price of $67.00, totaling $4,489. The contract mandates strict adherence to DLA’s Master List of Technical and Quality Requirements, which override any conflicting standards such as ASTM D3951. Packaging must comply with MIL-STD-129 and RP001 DLA Packaging Requirements, with all items palletized and labeled according to specified guidelines. Inspection and acceptance occur at the destination, with no variance allowed in quantity. Delivery is due within 171 days of award, with an original required delivery date of March 30, 2027, and a needed ship date of January 31, 2027. The item must be delivered FOB origin to the receiving warehouse in Tracy, California, with transportation governed by DLAD PROC NOTES C19 and C20. The contract enforces a zero-defect sampling standard, requiring compliance with MIL-STD-1916 or ASQ H1331, where critical, major, and minor attributes must be verified at levels VII, IV, and II or with AQLs of 0.1, 1.0, and 4.0 respectively, and any unspecified attributes are treated as major. Acceptance requires zero non-conformances unless otherwise directed. Cybersecurity requirements mandate a CMMC Level 2 Self-Assessment, and all government identification must be removed from non-accepted supplies. The seller is subject to all DLA directives, including unit of issue specifications and packaging standards, with no exceptions permitted. Contract performance is monitored via the point of contact Hien-Van Trinh, and all documentation must reference the authorized DLA unit of issue as defined in official DoD guidelines.
Hardware Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
STAND, COMPRESSED GA
Solicitation # SPE4A5-26-T-325J
The contract is for the procurement of 18 units of a commercial off-the-shelf stand designed for compressed gas cylinders, identified by part number G-600 and NSN 4920-01-587-5435, sourced from First Safety Corporation Inc. The item must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which take precedence over ASTM D3951 packaging standards. Packaging and labeling must follow MIL-STD-129, and palletization must adhere to DLA Packaging Requirements for Procurement (RP001). Delivery is FOB origin with a 171-day lead time, and inspection and acceptance occur at the destination. The quantity is fixed with no variance allowed. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, with the required ship date set for January 31, 2027, and the original delivery date as July 24, 2027. Each unit is priced at $18.00, totaling $324.00 for the order, under contract SPE4A5-26-T-325J. Transportation details are governed by DLAD Proc Notes C19 and C20, and the unit of issue is each (EA). All government identification must be removed from non-accepted supplies, and compliance with the DLA Master List controls the applicable revision level based on the solicitation or award date.
Other Electronic Component Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334513
New
DIBBS
THERMOMETER, SELF-IN
Solicitation # SPE4A5-26-T-325E
The contract concerns the procurement of six self-injecting thermometers with NSN 6685-01-643-7750 under solicitation SPE4A5-26-T-325E, issued by the Department of Defense’s ASC SUPPLIER OPER OEM DIVISION. Delivery is required FOB origin within 171 days of award, with a firm delivery deadline of January 31, 2027, and no variance permitted in quantity. All units must comply with DLA’s technical and quality requirements referenced in the DLA Master List, including sampling protocols aligned with MIL-STD-1916 or ASQ H1331, where critical, major, and minor attributes must be verified at levels VII, IV, and II or corresponding AQLs of 0.1, 1.0, and 4.0. Zero non-conformances are required in sampled lots unless otherwise specified. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129 with the special marking code 05 indicating a delicate instrument, and palletization must conform to DLA packaging standards. The product is labeled as RTEMP INSTRUMENT CORPORATION P/N B4T6QPX2256X-C3TSVB and requires no government identification removal. The shipment must be sent to the specified receiving warehouse in Tracy, California, following DLA transportation notes C19 and C20, and packaging must comply with hazardous materials standards where applicable. The unit price is $6.00 per unit, totaling $36.00, with all terms governing inspection and acceptance occurring at the destination.
Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334519
New
DIBBS
ADAPTER, GAGE
Solicitation # SPE4A5-26-T-321C
The contract pertains to the procurement of an Adapter, Gage with NSN 6685-00-274-5533 and part number 421371-1, manufactured by Enerpac Tool Group Corp under specification SPE4A5-26-T-321C. Nine units are required at a unit price of $9.00, with delivery due in 171 days FOB origin to DLA Distribution San Diego. The item is classified as a critical application item requiring physical identification and compliance with MIL-STD-129 marking standards. Packaging must adhere to MIL-STD-2073-1E, with specific preservation methods and unit containment codes, and palletization must meet DLA’s packaging requirements. Inspection and acceptance occur at the destination, with zero tolerance for non-conformances under sampling plans specified by MIL-STD-1916 or equivalent zero-based systems, unless otherwise designated. Attributes are assigned verification levels or AQLs per defined standards, and unspecied attributes are treated as major. Mercury and mercury-containing compounds are strictly prohibited except in exempted functional components such as batteries or instrument sensors, which must include secondary containment as per NAVSEA 5100-003D. Configuration changes require formal engineering change proposals or variance requests, and government identification must be removed from non-accepted supplies. Covered defense information provisions apply, and the contract explicitly excludes Item Unique Identification per DFARS 252.211-7003(c)(1)(i). The solicitation opened on August 4, 2026, with responses due August 12, 2026, and performance is directed under DLA’s authorized unit of issue system with full alignment to technical and quality requirements referenced from the DLA Master List.
Other Measuring and Controlling Device Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
NUT, PLAIN, PLATE
Solicitation # SPE4A5-26-T-328K
The contract pertains to the procurement of 24 plain plate nuts with NSN 5310-00-241-0092 under solicitation SPE4A5-26-T-328K, issued by the Department of Defense’s ASC SUPPLIER OPER OEM DIVISION. Delivery is required within 115 days after award, with responses due by August 12, 2026. The item has no shelf life requirement and does not require Unique Item Identification as specified by the Service customer, in accordance with DFARS 252.211-7003(c)(1)(i). Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless superseded by an amendment. Packaging must comply with DLA standards, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers. Inspection and acceptance occur at origin, and government identification must be removed from non-accepted supplies. Bare items must be physically marked according to RQ017, and measuring and test equipment used must meet specified standards. Sampling follows MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Unspecified attributes are treated as major. Zero non-conformances are required unless otherwise stated. Data supporting this procurement is deemed proprietary or insufficient for competitive bidding. The place of performance is Cherry Point, North Carolina, 28533-5040, with Jaelyn Buford listed as the primary point of contact.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
BATTERY CHARGER, AIR
Solicitation # SPE4A5-26-T-326V
The contract is for the procurement of six battery chargers, air model, identified by NSN 4920-01-498-2543 and part numbers 4159-MIL and CA 1550 MIL from Lamar Technologies LLC, with delivery required within 171 days under a total small business set-aside. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951, and packaging must comply with MIL-STD-129 and DLA Packaging Requirements, including palletization per RP001. Sampling follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are classified with verification levels VII, IV, and II corresponding to AQLs of 0.1, 1.0, and 4.0 respectively. The item is designated as a critical application requiring strict configuration control and physical identification, and non-approved sources must obtain source approval from the design control activity with technical data packages submitted with their offer. Delivery is FOB origin to the DLA Distribution facility in New Cumberland, Pennsylvania, with inspection and acceptance occurring at destination. The purchase request number is 7017739882, unit of issue is EA, quantity is fixed at six units with zero variance allowed, and the required delivery date is January 31, 2027, with an original target of January 26, 2027. All markings, labeling, and documentation must adhere to applicable DoD and DLA directives, and transportation follows DLAD procedural notes C19 and C20.
Other Electronic Component Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334514
New
DIBBS
TRANSMITTER, LIQUID QUA
Solicitation # SPE4A5-26-T-325X
The contract specifies the procurement of four liquid quantity transmitters under solicitation SPE4A5-26-T-325X, with a delivery deadline of 171 days after order. The item, identified by NSN 6680-01-666-8749, is subject to stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation or award date depending on acquisition size. Packaging, identification, and documentation must comply with specific DLA standards including RP001, RQ011, RQ017, and RC001, while sampling follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated. Configuration changes require formal engineering change proposal procedures, and cybersecurity compliance mandates CMMC Level 2 certification for third-party assessors. Technical data associated with the item is subject to ITAR or EAR export controls, prohibiting unauthorized disclosure to foreign persons regardless of location, with distribution restricted to contractors who hold US/Canada Joint Certification Program status, have completed mandatory DLA training, and received explicit approval. Item Unique Identification is waived per customer request under DFARS 252.211-7003(c)(1)(i). The contract is managed by the Department of Defense’s ASC Supplier Oper OEM Division, with performance located in New Cumberland, Pennsylvania, and primary point of contact Hien-Van Trinh.
Totalizing Fluid Meter and Counting Device Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
NUT, SHEET SPRING
Solicitation # SPE4A5-26-T-323A
This contract is for the procurement of 951 units of a nut, sheet spring, identified as a commercial off-the-shelf item under part number 03A111-3-1 and its alternate variants including 13100009-1 and 132A11144-7-3, sourced from multiple approved suppliers such as Northrop Grumman Systems Corporation, Republic Fastener Mfg. Corp., GE Engine Services Distribution, LLC, STE MRAS, LLC, and The Monadnock Company. The item is classified as a critical application component and is not required to have unique item identification, in accordance with DFARS 252.211-7003(c)(1)(i). The National Stock Number is 5310-01-331-8030, with a unit price of $951.00, resulting in a total contract value based on the agreed quantity. Delivery is required within 171 days, with shipment to be made FOB origin under strict packaging standards including MIL-STD-2073-1E and MIL-STD-129 marking requirements, and palletization per DLA’s RP001 packaging guidelines. The item is designated for delivery to the DLA Distribution Depot in Tinker AFB, Oklahoma, with no tolerance for quantity variance. The contract does not require special marking and mandates that all units be packaged and labeled in full compliance with federal packaging and transportation regulations. The procurement is part of a HUBZone Set-Aside solicitation, with the NAICS code 332722 indicating manufacturing of screw, nut, and bolt products. The ordering activity is the ASC Supplier Oper OEM Division under the Department of Defense, with the solicitation issued under reference SPE4A5-26-T-323A. The original required delivery date is August 16, 2027, with a need ship date of January 31, 2027, and the point of contact for logistics inquiries is Donetta Nelson. Transportation logistics follow DLA Procurement Notes C19 and C20, and all units must be delivered in accordance with the DoD-authorized unit of issue as defined in the official DLA documentation.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334519
New
DIBBS
ADAPTER ASSEMBLY, COMPA
Solicitation # SPE4A5-26-T-321S
This contract specifies the procurement of an Adapter Assembly, Comparator, identified by NSN 6685-00-934-8642 and part number 3460-108-0120, with a quantity of four units. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revision control based on the solicitation or award date depending on the acquisition size. Packaging must comply with MIL-STD-2073-1E and DLA Packaging Requirements, including marking per MIL-STD-129 with no special markings required. The item is designated as a Critical Application Item, and mercury or mercury-containing compounds are strictly prohibited in any hardware, preservation, packaging, or marking materials except for specific functional applications such as batteries, fluorescent lights, sensors, or chemical reagents as defined by NAVSEA, with portable devices containing mercury requiring shock-proof construction and a secondary containment boundary. Sampling for inspection follows MIL-STD-1916 or a comparable zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, and only zero non-conformances are acceptable unless otherwise stated. Delivery is FOB origin, with inspection and acceptance occurring at destination, and the item must be delivered within 171 days from the award date with zero tolerance for quantity variance. The destination is the DLA Distributor San Joaquin warehouse in Tracy, CA, with shipping details and transportation governed by DLAD Proc Notes C19 and C20. The original required delivery date is January 18, 2027, with a need ship date of January 31, 2027, and the contract was solicited under SPE4A5-26-T-321S with a response deadline of August 12, 2026.
Other Measuring and Controlling Device Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details