Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

5340--Electronic Cylinder Cores, Cylinder Locks, 640-A69159

Awarded
36C26126Q0818Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The government is soliciting quotes for Electronic Cylinder Cores and Cylinder Locks under solicitation number 36C26126Q0818, with the goal of awarding a contract to the offeror whose proposal provides the most advantageous balance of technical capability and price. Evaluation will be conducted through direct comparison of all conforming offers based on three key factors: technical capability, authorized distributor status, and delivery date. Technical evaluation focuses on how well each response meets or exceeds the requirements outlined in the solicitation, with the government retaining full discretion to select a proposal that surpasses minimum requirements if it delivers additional benefit, even if not the lowest price. Quotes must be submitted by the Original Equipment Manufacturer or through an authorized distributor with a valid letter on OEM letterhead, dated within 18 months of submission. Delivery performance will be assessed based on the number of days after receipt of order, as specified. Pricing will be determined by summing all line-item costs to derive the total evaluated price. Offers must strictly adhere to the solicitation without alternates, and only responses that satisfy all mandatory requirements will be considered. The contract will become binding upon written notice of award sent to the successful offeror within the acceptance period, and the government may accept an offer at any time prior to its expiration unless formally withdrawn. The procurement is managed by the Department of Veterans Affairs, Office 261-NETWORK Contract Office 21, located in Mather, California, with Mohammed Hussain serving as the primary point of contact.

General Info

Government seeks electronic cylinder cores and locks via best-value award, requiring OEM or authorized distributor quotes with delivery and technical compliance.

Agency

Department Of Veterans Affairs → 261-NETWORK Contract Office 21 (36C261)View Agency

Contract Value

$507,360.84

NAICS

334290 - Other Communications Equipment ManufacturingView NAICS

Place of Performance

CA

Set-Aside

NONE

Awardee

INTERMOUNTAIN LOCK AND SECURITY SUPPLY COView Profile

Award Issued Date

Documents

(1)

GS-07F-0239W 36C26126F0283 - Electronic Cylinder Cores and Locks

DOCXaward

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseAwarded
Posted

Award Notice

Awarded

Contract was awarded

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Veterans Affairs → 261-NETWORK Contract Office 21 (36C261)
Contacts1 person available
OfficeMATHER, CA, 95655, USA
Organization / Agency
Department Of Veterans Affairs → 261-NETWORK Contract Office 21 (36C261)
View Agency Profile
Office AddressMATHER, CA, 95655, USA
Contacts
Mohammed HussainContracting Officer

Full Description

Show more
The quotes will undergo a comparative evaluation to determine which quote is the best overall offer to the government in terms of high technical capability, while also providing a competitive price. Quotes will be evaluated by performing a direct comparison of one offer with another in a uniform manner to determine which quote provides the government with its needs, as identified in the RFQ. The government reserves the right to consider a response that offers more than the minimum and select that response if it provides a benefit to the government. The government has the discretion to accept other than the lowest priced offeror that provides additional benefits. The government reserves the right to select a response that provides benefit to the Government that exceeds the minimum but is not required to do so. Responses may exceed requirements. Each response at a minimum must meet solicitation requirement statement. The government is not requesting or accepting alternate quotes.
(a) The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers: Technical
b) Authorized Distributor Delivery Date Price
Technical: The quotation will be evaluated to the extent to which it can meet and/or exceed the Government's requirements as outlined in the solicitation and based on the information requested in the instructions to offerors section of the solicitation. b) Authorized Distributor: Quote responses that are not submitted by the Original Equipment Manufacturer (OEM) must include an authorized distributor letter on OEM stationary, dated within 18 months of quote submission. Delivery Date: The quotation will be evaluated based on delivery days after receipt of order (ARO) as outlined in instructions to offerors. Price: The Government will evaluate the price by adding the total of all line-item prices. The Total Evaluated Price will be that sum. (b) A written notice of award or acceptance of an offer, mailed or otherwise furnished to the successful offeror within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party. Before the offer's specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award. (End of Provision)

Similar Contracts

Same NAICS industry code

More opportunities from Department Of Veterans Affairs → 261-NETWORK Contract Office 21 (36C261)

Same awarding agency

NAICS: 236220
New
Federal
Z2LZ--Design Build to Install Parking Shades and Parking Lot Reconfiguration Project 593-26-306
Solicitation # 36C26126R0055_2
Solicitation 36C26126R0055 is a firm-fixed-price design-build project for the Department of Veterans Affairs at the Southern Nevada Healthcare System in Las Vegas. The project focuses on installing parking lot shades and reconfiguring parking lots to reduce vehicle-pedestrian conflicts, enhance accessibility, and protect staff and Veterans from extreme heat. The scope includes complete design services, demolition of existing structures, and infrastructure work such as grading, drainage, and the installation of carports and protected walking paths. The project is a 100% set-aside for Service-Disabled Veteran-Owned Small Businesses (SDVOSB) under NAICS code 236220, with an estimated magnitude between 5 million and 10 million dollars and a performance period of 550 calendar days. The procurement follows a two-phase selection process. Phase One evaluates technical approach, experience, and past performance to select up to five qualified offerors. Phase Two utilizes a best-value trade-off process focusing on key personnel, project schedule, and price. Proposals are due by October 15, 2026. The contract requires strict adherence to OSHA, OHS, and VA Master Specifications, as well as ADA/ABAAS accessibility standards. Key requirements include the submission of a security memorandum for sensitive information, compliance with the Davis-Bacon Act for prevailing wages in Clark County, and the provision of bid, payment, and performance bonds. Final acceptance is contingent upon a joint inspection to verify the facility is complete and ready for occupancy.
Commercial and Institutional Building Construction

POSTED

1 day ago

DEADLINE

in about 1 month
View Details
NAICS: 811310
New
Federal
J035--ELEVATOR MAINTENANCE, INSPECTION, & REPAIR SERVICE VA SIERRA NEVADA HEALTH CARE SYSTEM
Solicitation # 36C26126Q1078
Solicitation 36C26126Q1078 is a request for quotes for elevator maintenance, inspection, and repair services at the VA Sierra Nevada Health Care System in Reno, Nevada. The contract covers 17 elevators and one cart lift, with a primary objective of maintaining vertical transportation equipment according to original manufacturer designs and applicable safety codes, including NFPA and Joint Commission standards. The award is set aside for Service-Disabled Veteran-Owned Small Businesses (SDVOSB) under NAICS code 238290. The base period of performance runs from October 1, 2026, to September 30, 2027, with four subsequent option years extending the contract through September 30, 2031. The selected contractor must provide 24/7 emergency callback services and a dedicated contract manager. Technical requirements include a minimum of ten years of experience within the last twelve years maintaining similar equipment, as well as valid Nevada state and Washoe County licensure. The government will award a firm-fixed-price contract based on best value, evaluating technical capabilities, past performance, and pricing. The price schedule consists of a flat monthly rate for routine maintenance and a not-to-exceed amount of 20,000 dollars per period for miscellaneous repairs. Performance will be monitored via a Quality Assurance Surveillance Plan using random, periodic, and 100 percent inspections to ensure compliance with safety and operational standards.
Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

1 day ago

DEADLINE

in 4 days
View Details
NAICS: 561621
New
Federal
MEDECO INTELLIGENT KEY HIGH-SECURITY LOCK SYSTEM
Solicitation # 36C26127Q0049
The Department of Veterans Affairs, through the Northern California Health Care System, is seeking a qualified ASSA ABLOY/MEDECO authorized vendor to provide comprehensive support for its existing Intelligent Key high-security lock system. This requirement involves the procurement of specific hardware and software components to maintain system security and functionality, including 150 lock cores, 200 key fobs (175 standard and 25 heavy-duty), 5 Integrated Programming Devices, and 100 industrial-rated micro SD cards. Additionally, the contractor must provide at least one server software upgrade annually, critical security updates, and 24-hour software support. The government intends to award a single firm-fixed-price contract consisting of a 12-month base period and four 12-month option periods, with an anticipated award date in December 2026. The contract falls under NAICS code 561621 and requires strict adherence to invoicing procedures via Tungsten, including the submission of detailed electronic consolidated invoice reports to the Contracting Officer's Representative for approval. All provided equipment and software must be fully compatible with the existing MEDECO environment, and the contractor must provide proof of authorization as a certified vendor or distributor during the proposal process.
Security Systems Services (except Locksmiths)

POSTED

1 day ago

DEADLINE

in about 1 month
View Details
NAICS: 811310
New
Federal
Dry Type Fire Suppression - Grease Hood and HAZMAT services
Solicitation # 36C26126Q1073
The Department of Veterans Affairs Network Contracting Office 21 is soliciting quotes for dry-type fire suppression system maintenance and testing for the Veterans Affairs Palo Alto Health Care System. This total small business set-aside contract covers services for grease hoods, exhaust fans, chemical hazmat sheds, and data centers across multiple locations, including the Livermore Medical Center. The scope of work includes preventative maintenance performed on monthly, quarterly, semi-annual, and annual schedules, with specific requirements for high-frequency cleaning of certain hoods and fans. The contract structure consists of a base period and four option years, with the government reserving the right to extend services in increments of one to six months. To be eligible, offerors must possess a California C-16 contractor license and be certified by system manufacturers to service Ansul and related automatic fire control systems. Additionally, grease hood cleaning must be performed by specialists certified by the International Kitchen Exhaust Cleaning Association or an equivalent body, ensuring compliance with NFPA 96, 17A, 10, and 72 standards. Award will be based on the best value, evaluating technical capabilities, past performance within the last three years, and competitive pricing. The contractor is responsible for providing up to 5,000 dollars in replacement parts for preventative maintenance per period of performance and must submit quotes for emergency repairs within 72 hours of a device failure. Performance will be monitored via a Quality Assurance Surveillance Plan focusing on safety, environmental compliance, and adherence to OSHA LOTO procedures.
Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

1 day ago

DEADLINE

in 5 days
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 650+ contractors already using CLEATUS