This Government Contract opportunity from Department Of Defense was posted on October 13, 2010. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

61--selection, and delivery of electrical equipment to be used by the government during winter maintenance dewatering at Lock & Dam #10.

Awarded

W912ES-10-T-0123Federal

Submission Closed10/13/2010, 12:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 237130

New

AAL-1440-01 RCO Relocation Hooper Bay - BNATCS

Solicitation # AAL-1440-01

Solicitation AAL-1440-01 is for the RCO relocation project located in Hooper Bay, Alaska, managed by PTSI Managed Services Inc. and the FAA. The scope of work involves specialized construction activities including foundation work, duct bank installation, and grounding work. This project falls under NAICS code 237130 for Power and Communication Line and Related Structures Construction, with an estimated contract magnitude between 100,000 and 250,000 dollars. The solicitation was posted on October 29, 2026, with a response deadline of November 14, 2026, and a proposed start date of December 10, 2026. This opportunity is set aside for small businesses, including certified Veteran Owned, Service-Disabled Veteran Owned, Women-Owned, and HUBZone small businesses. Interested firms should coordinate with the primary point of contact, Masanori Akers, the Parsons Subcontract Administrator.

PTSI Managed Services Inc.

POSTED

DEADLINE

Installation of Buried Fiber Optic Cable Stanton North Substation to Hoskins Substation

Solicitation # 26085

The Nebraska Public Power District is soliciting bids for Request for Bid No. 26085 to install approximately six miles of underground fiber optic cable between the Stanton North and Hoskins Substations in northeast Nebraska. The scope of work encompasses all labor, materials, and supervision required for staking, material coordination, property owner contacts, schedule preparation, mobilization, demobilization, and right-of-way restoration. Key deliverables include the installation of contractor-provided 48-strand buried fiber optic cable and district-provided 48-strand all-dielectric fiber, starting from the Hoskins 345kV substation control building. Work must be completed by April 15, 2027, with an expected award date on or before November 25, 2026. Qualified bidders must demonstrate the completion of at least three similar projects within the last five years and provide certifications regarding litigation and bonding history. Bids are due by November 13, 2026, and must include a completed pricing spreadsheet, current labor and equipment rates, and a proposed schedule. The contract will be awarded to the responsible bidder with the best evaluated bid based on price, technical conformance, and general qualifications. Payment terms specify that 95 percent of the price is paid upon acceptable performance, with 5 percent retained until final acceptance. Contractors are required to maintain comprehensive insurance coverages, including Commercial General Liability of 1 million dollars per occurrence and Workers Compensation as required by the State of Nebraska.

Nebraska Public Power District

POSTED

DEADLINE

High-Voltage Transmission Installation & InterconnectionThis subcontract for High-Voltage Transmission Installation and Interconnection involves the installation of 230kV transmission lines at the NSB Kings Bay US Navy facility. The scope of work includes the recapitalization of the transmission loop, the coordination of power service interruptions to ensure continuity of operations, and the integration of proprietary protection schemes with the Georgia Power Company to deliver a fully operational transmission loop. The project requires the use of specialized machinery and 230kV transmission equipment suitable for military zones. Due to the nature of the facility and the critical infrastructure involved, personnel must possess Secret security clearances and maintain strict NERC CIP compliance. The contract is managed under Navfacsyscom Southeast for the Department of Defense.

Navfacsyscom Southeast

POSTED

DEADLINE

B21 Utilities & Site Improvements, Communications & Electrical Infrastructure, Dyess AFB OT Feasibility & Business Feedback

Solicitation # W9126G27R1CSY

The U.S. Army Corps of Engineers, Fort Worth District, is conducting market research via a Sources Sought notice for the B-21 Utilities and Site Improvements project at Dyess Air Force Base, Texas. This initiative aims to establish high-reliability primary electrical power distribution and dedicated fiber-optic communications infrastructure to support the bed-down of the B-21 weapons system. The scope includes the installation of single-mode fiber optic cables, telephone system expansion, power cabling in concrete encased ducts, pole-mounted conductors, and associated transformers and switchgear. The project also encompasses site improvements such as earthwork, grading, and erosion control. The estimated Construction Cost Limitation is $28,550,000, though an $8 million electric substation and specific end-user network equipment are expressly excluded from this contract. The government is currently evaluating whether to utilize a traditional Federal Acquisition Regulation based contract or an Other Transaction Agreement under 10 U.S.C. section 2808a. If a collaborative procurement framework is chosen, a two-phase selection process will be implemented, focusing first on technical capability, past performance, and collaborative execution history, followed by an evaluation of final technical and price proposals. The project must adhere to strict Department of Defense standards, including UFC 1-200-01 for general building requirements, UFC 4-010-01 for antiterrorism, and UFC 4-010-06 for cybersecurity of facility-related control systems. The anticipated period of performance is 690 calendar days from the notice to proceed, with a required beneficial occupancy date of March 8, 2030.

POSTED

DEADLINE

De Palma Road Electrical Conduit Installation Project

Solicitation # TLARC-819

The County of Riverside is soliciting bids for the De Palma Road Electrical Conduit Installation Project (Project No. D4-0072) located in the Community of Horsethief Canyon, California. The project involves the excavation and backfill of approximately 1,000 feet of trenching, the installation of 685 feet of 1.5-inch and 350 feet of 3-inch electrical conduit and handholes, and the installation of 6-inch Type D concrete curb per County Standard No. 204. All work must adhere to Southern California Edison plans and be completed within 30 working days from the commencement date specified in the County's written order. The estimated project cost is 209,000 dollars. The contract will be awarded to the lowest responsive and responsible bidder. Bidders must submit their proposals by December 2, 2026, at 1:30 P.M. Pacific Time, including a non-collusion declaration and a bid guarantee of 10 percent of the total bid. The awarded contractor must provide performance and payment bonds, comply with California State Labor Code prevailing wage requirements, and adhere to specific affirmative action plans based on contract value and employee count. Payments will be made monthly, with the Owner paying 90 percent of the value of labor and materials incorporated into the work and 75 percent of materials stored on site, subject to certification by the Architect.

POSTED

DEADLINE

Installation Of Street Lighting On Raymond Avenue From Maple Street To North City Limits

Solicitation # 2026-IFB-CIV-0549

The City of Pasadena Department of Public Works is soliciting bids under solicitation number 2026-IFB-CIV-0549 for the installation of a new street lighting system on Raymond Avenue, extending from Maple Street to the North City Limits. The project requires the contractor to furnish and install concrete street lighting standards, foundations, LED luminaires and fixtures, conduits, conductors, pull boxes, and other appurtenant work. Key technical deliverables include 29W or 50W LED replacements, galvanized steel conduits, and 6 foot Type S Scroll Arms. The contractor must provide all necessary labor, materials, and equipment, ensuring compliance with the ADA, CBC, Title 24, and PROWAG accessibility guidelines. Bids must be submitted electronically via the City of Pasadena eProcurement Portal by 2:00 pm on November 17, 2026. Qualified bidders must provide evidence of experience with two similar governmental projects and submit several mandatory documents, including Form AA-1, Form AA-2 for labor exceeding 25,000 dollars, a non-collusion declaration, and a DHS contract disclosure. A bid security of five percent of the total bid price is required, and the successful awardee must provide material and faithful performance bonds for 100 percent of the base bid. Work must commence within 15 calendar days of the Notice to Proceed and be completed within 20 working days. Invoicing is handled through the city's Vendor Invoice Portal, with payments issued on Tuesdays and Thursdays.

City of Pasadena Department of Public Works

POSTED

DEADLINE

Fiber Optic Ground Wire (OPGW) InstallationThis subcontract involves the installation of .551 diameter fiber optic ground wire for prime contractors working on Nebraska Public Power District projects. The scope of work specifically covers the installation of OPGW from Structure 107 to Dead-End Structure 79, requiring the delivery of a fully installed and tested system. To ensure the integrity of the fiber and prevent damage, the contractor must utilize specialized pulling and tensioning equipment in strict accordance with the engineering specifications outlined in Section G. The project falls under NAICS code 237130, with a response deadline set for December 2, 2026.

Nebraska Public Power District

POSTED

DEADLINE

High-Voltage Conductor and Shield Wire InstallationThis subcontract for High-Voltage Conductor and Shield Wire Installation involves performing specialized electrical infrastructure work for prime contractors on Nebraska Public Power District projects. The scope of work focuses on upgrading existing 266 26/7 ACSR to 954 45/7 ASCR Rail conductor and replacing 3/8 inch EHS steel shield wire with 7/16 inch EHS steel. Additionally, the contractor is responsible for installing insulators, dampers, crossarms, and X-braces in strict accordance with the stringing charts provided in Section I. To successfully execute the project, the contractor must utilize tensioners and pullers to deliver a fully tensioned conductor and shield wire system. This opportunity falls under NAICS code 237130, with a response deadline set for December 2, 2026.

Nebraska Public Power District

POSTED

DEADLINE

Transmission Structure Erection and Pole SettingThis subcontract for the Nebraska Public Power District involves the erection and setting of transmission structures. The scope of work requires the installation of 28 wood H-Frame tangent structures and one steel monopole on a drilled pier. Key technical requirements include backfilling poles with crushed limestone and the installation of ground rods, wire, molding, and staples, with ground impedance testing performed according to specific technical drawings. The contractor is responsible for providing all necessary pole setting equipment and drilling rigs to deliver fully assembled and set structures. This project falls under NAICS code 237130, with a response deadline set for December 2, 2026.

Nebraska Public Power District

POSTED

DEADLINE

115kV Transmission Line 1266 Rebuild Stanton North Substation to Dead-End Structure 79

Solicitation # 26-012

Nebraska Public Power District is soliciting sealed bids for Contract No. 26-012 to rebuild approximately 4.05 miles of the 115kV transmission line 1266, extending from the Stanton North substation to Dead-End Structure 79. The scope of work requires the contractor to provide all labor, supervision, equipment, and miscellaneous materials to replace all structures, conductors, shield wires, and hardware. Key technical deliverables include the installation of 28 wood H-Frame tangent structures and one tubular steel monopole dead-end on a drilled pier, upgrading the conductor to 954 kcmil 45/7 ASCR Rail, and installing 0.551 diameter fiber optic ground wire and EHS steel shield wire. The project also involves tree clearing, site preparation, and the removal of existing structures and conductors. Bids are due by 2:00 p.m. CST on December 2, 2026, and must be submitted as sealed hard copies to the Procurement Department in Columbus, Nebraska. The award will be based on the lowest cost and best bid, with evaluation factors including technical conformance, schedule capability, financial standing, and past performance history. Prospective bidders are encouraged to attend an optional pre-bid teleconference and site visit on November 23, 2026. Required submission documents include a signed proposal page, a completed price quotation table, a W-9 form, and bid security in the form of a certified check, irrevocable letter of credit, or bid bond. The successful contractor must provide a performance bond and maintain workers compensation and commercial general liability insurance.

Nebraska Public Power District

POSTED

DEADLINE

RFP No. 27-05: Demolition, Development, Construction & Lease of a Telecommunications Tower Facility

Solicitation # BD-27-1158-NBPT3-NBPT3-134879

The City of Newburyport is soliciting proposals under RFP No. 27-05 for the design, permitting, financing, construction, ownership, operation, and maintenance of a telecommunications tower facility. Located at 1 Plum Island Point Road in Newburyport, Massachusetts, the project aims to improve broadband infrastructure, public safety communications, and emergency response reliability on Plum Island and surrounding coastal areas. The selected vendor will be responsible for constructing a facility capable of supporting multiple carriers and city public safety equipment, relocating existing safety equipment, and demolishing the current tower on the premises. This solicitation, identified as BD-27-1158-NBPT3-NBPT3-134879, was posted on October 28, 2026, with a response deadline of November 20, 2026, at 4:00 PM. Interested qualified telecommunications infrastructure developers, wireless carriers, or tower management companies must submit their proposals by the deadline, as electronic quotes are not permitted. Tom Watkins serves as the primary point of contact and purchaser for the project. An optional pre-proposal site visit was scheduled for November 5, 2026.

POSTED

DEADLINE

MBE, WBE and SDVOB Contracting Opportunity

Solicitation # 2140303

L3Harris Technologies has been contracted by the New York State Thruway Authority to implement a new Land Mobile Radio system across 54 communications sites along the Thruway corridor, extending from Buffalo to New York City. This system is designed to support essential personnel performing roadway maintenance, road repair, and snow removal. The project involves significant site-level work, including pouring concrete for antenna towers, shelters, and generators, providing New York certified concrete testing services, installing antennas and coaxial cables with sweep testing, and performing electrical work such as installing power conduits, grounding components, transfer switches, electrical panels, and site fences. L3Harris is seeking qualified lower-tier subcontractors to support these efforts, with specific socioeconomic goals of 15 percent for Minority-Owned Businesses, 15 percent for Women-Owned Businesses, and 6 percent for Service-Disabled Veteran-Owned Businesses. Interested parties must submit their company and contact information, a brief description of capabilities, and a NYSTA Certified Vendor Number to Program Manager Daniel Voiland by December 10, 2026. An executed Non-Disclosure Agreement will be required before project plans are released for review.

New York

POSTED

2 days ago

DEADLINE

in about 1 month

AI Contract Overview

This contract is a solicitation for the selection and delivery of electrical equipment to support winter maintenance dewatering at Lock and Dam 10 in Guttenberg, Iowa. The project requires the contractor to provide and deliver specific materials, including two 400 ampere manual transfer switches, two 400 ampere panelboards with circuit breakers, eight 60 ampere receptacles, six 100 ampere receptacles, and various lengths of copper cable ranging from #4 AWG to 250 MCM, along with corresponding cable strain reliefs. All equipment must meet strict technical standards, including NEMA 3R ratings for enclosures and compliance with ANSI, NFPA 70, and UL safety specifications. The acquisition is set aside for small businesses under NAICS Code 237130. The contractor is responsible for all delivery and off-loading arrangements, with a required delivery date of November 1, 2010, to ensure equipment is on-site before the dewatering period begins on December 6, 2010. Payment is structured as a lump sum upon government acceptance of the materials. Proposals must include manufacturer cut sheets for all specified equipment to ensure technical compliance.

General Info

Agency

Department Of Defense → W07V Endist St Paul

Contract Value

$71,787

NAICS

237130 - Power and Communication Line and Related Structures Construction

Place of Performance

USACE Lock & Dam 10 5 Lock and Dam Lane Guttenberg IA 52052 US, MN, USA

Set-Aside

NONE

Awardee

MID STATES ELECTRIC CO.

Award Issued Date

10/13/2010, 12:00:00 AM UTC

Documents

Electrical Equipment Locations Plan - US Army Corps of Engineers

specifications

High

Solicitation W912ES-10-T-0123: Electrical Supplies for Lock & Dam #10

6 pages · rfq

High

USACE St. Paul District - Dewatering Pumps One Line Diagram

specifications

High

W912ES-10-T-0123 - Lock 10 Dewatering Electrical Equipment

rfq

High

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

2 updates

PhaseAwarded

PostedSep 22

Combined Synopsis

Notice updatedSep 23

The notice description changed.

Notice updatedSep 23

Response deadline changed from Oct 1, 2010 to Oct 2, 2010. The notice description changed. The point of contact changed.

AwardedOct 13

Contract was awarded

Submission Closed

10/13/2010, 12:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → W07V Endist St Paul

Contacts2 people available

OfficeSAINT PAUL, MN, 55101-1323, USA

Organization / AgencyDepartment Of Defense → W07V Endist St Paul

Office AddressSAINT PAUL, MN, 55101-1323, USA

Contacts

Christopher G. Dake

contact@example.gov

+1 (555) 000-0000

Patrick MallyCONTRACTING OFFICER

contact@example.gov

+1 (555) 000-0000

Full Description

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. This acquisition is set aside for NAICS Code 237130; small business size is $33,500,000.00 (not $3,500,000.00 as listed elsewhere) LOCK 10 DEWATERING ELECTRICAL EQUIPMENT MATERIAL SCOPE Part 1 GENERAL 1.1 SCOPE. The work specified herein includes the selection, and delivery of electrical equipment to be used by the government during winter maintenance dewatering at Lock & Dam #10. Lock & Dam #10 will be closed for winter maintenance dewatering from December 6, 2010 to March 13, 2011. All electrical equipment shall be delivered to the site specified on or before November 1, 2010. The contractor shall be responsible for making all arrangements for delivery and for off-loading of electrical equipment and materials. 1.1.1 Provide two, 400 ampere manual transfer switches. 1.1.2 Provide two, 400 ampere panelboards with circuit breakers. 1.1.3 Provide eight, 60 ampere receptacles. 1.1.4 Provide six, 100 ampere receptacles. 1.1.5 Provide 2100 feet of cable with three #4 AWG conductors and #8 AWG equipment ground. a. Provide 60 cable strain reliefs sized for cable provided. 1.1.6 Provide 600 feet of cable with three 250 MCM conductors and #4 AWG equipment ground. a. Provide 24 cable strain reliefs sized for cable provided. 1.1.7 Provide 2500 feet of cable with three #1 AWG conductors and #6 AWG equipment ground. a. Provide 52 cable strain reliefs sized for cable provided. 1.1.8 Provide 1200 feet of with three #1/0 conductors and #6 AWG equipment ground. a. Provide 32 cable strain reliefs sized for cable provided. 1.2 APPLICABLE PUBLICATIONS. The publications listed below form a part of this specification to the extent referenced. The publications are referred to in the text by basic designation only. 1.2.1 American National Standard (ANSI): IEEE C2-2007 National Electrical Safety Code 1.2.2 National Electrical Manufacturers Association (NEMA): NEMA 250-2008 Enclosures for Electrical Equipment (1000 Volts Maximum) NEMA AB 1-2002 Molded-Case Circuit Breakers, Molded-Case Switches and Circuit-Breaker Enclosures NEMA PB 1-2002 Standards for Panelboards 1.2.3 National Fire Protection Association (NFPA) Publications: NFPA 70-2008 National Electrical Code 1.2.4 Underwriters Laboratories: UL 44-2005 Standard for safety Thermoset-Insulated Wires and Cables UL 489-2009 Molded-Case Circuit Breakers, Molded-Case Switches and Circuit-Breaker Enclosures 1.2.5 US Army Corps of Engineers (USACE): EM 385-1-1-2008Safety and Health Requirements Manual 1.3 SUBMITTALS. The Contractor shall submit the following items with their proposals. 1.3.1 Manufacturers cut sheets. The information shall be submitted in a single transmittal entitled Lock #10 dewatering electrical equipment. Equipment and material cut sheets shall be of sufficient size and quality so as to be easily read and reproduced. The following items shall be submitted: a. Panelboards b. Transfer Switches c. Circuit Breakers d. 60 ampere receptacles e. 100 ampere receptacles f. Cable (each size) g. Cable strain relief (each size) 1.4 MEASUREMENT AND PAYMENT. The payment provided for in the contract shall constitute full compensation for furnishing all materials under the contract in a complete and acceptable manner. 1.4.1 Electrical Equipment. Payment will be made on a lump sum (LS) basis at the contract price and will constitute full compensation for all materials and delivery to include off-loading of materials to Lock & Dam #10, Electrical Equipment included in the lump sum payment shall include panelboards with circuit breakers, transfer switches, receptacles, cables and cable reliefs. Part 2 PRODUCTS 2.1 Provide two 400 amp surface mounted manual transfer switches; transfer switches shall be rated for 480/277 VAC, three phase, four wire, 400 amperes, have short circuit rating of 18K amperes (RMS symmetrical), contain separate neutral and equipment ground buss bars. Manual transfer switch enclosure shall be NEMA 3R rated per NEMA 250, shall be designed so that the switch contacts will break before make, shall be suitable for use as service equipment when installed, shall be interlock such that the door opens only when the switch is in the off position, shall be provided with padlock provision in all three positions main, off, standby, and the door shall lockable. Basis of specification is Midwest Electric Products, Inc model number GS3464B01Ul 2.2 Provide a 400 amp surface mounted panelboard; panelboard shall be rated for 480/277 VAC, three phase, 60 hertz, four wire, 400 amperes with main circuit breaker, have short circuit rating of 18K amperes (RMS symmetrical), contain separate neutral and equipment ground buss bars. Panelboards shall comply with NEMA PB 1 and NEMA AB 1. Enclosure shall be NEMA 3R rated per NEMA 250 and shall have the capacity for the number of circuit breakers specified as follow: Install a 400 amp main circuit breaker. Install two (2) 125 amp branch breakers. Install three (2) 60 amp branch breakers. Install four (4) 50 amp breakers branch breaker. Install one (1) 45 amp breaker and install one (1) 40 amp branch breaker. Short circuit rating of circuit breakers shall be the same as panelboard. All branch circuit breakers shall be three phase and rated for motor loads. Basis of specification is Square D, I-line series panelboard type HCN. 2.3 Provide a 400 amp surface mounted panelboard; panelboard shall be rated for 480/277 VAC, three phase, 60 hertz, four wire, 400 amperes with main circuit breaker, have short circuit rating of 18K amperes (RMS symmetrical), contain separate neutral and equipment ground buss bars. Panelboards shall comply with NEMA PB 1 and NEMA AB 1. Enclosure shall be NEMA 3R rated per NEMA 250 and shall have the capacity for the number of circuit breakers specified as follow: Install a 400 amp main circuit breaker. Install one (1) 150 amp branch circuit breaker. Install one (1) 110 amp branch breaker. Install one (1) 70 amp branch circuit breaker. Install four (3) 60 amp branch circuit breakers. Install three (3) 50 amp branch circuit breakers. Install three (3) 50 amp branch circuit breakers and install two (2) 45 amp branch breaker. Short circuit rating of circuit breakers shall be the same as panelboard. All branch circuit breakers shall be rated for motor loads. Basis of specification is Square D, I-line series panelboard type HCN. 2.4 Provide eight, 60 ampere, pin and sleeve raintight receptacles; receptacles shall be rated for 600 Vac, three wire, four pole, style 2 with shell and extra pole grounding. Basis of specification is Appleton, ADR6034 2.5 Provide two, 100 ampere, pin and sleeve raintight receptacles; receptacles shall be rated for 600 Vac, three wire, four pole, style 2 with shell and extra pole grounding. Basis of specification is Appleton, ADR1034 2.6 Provide type XLPE/PVC, Low-voltage, unshielded, 600V, UL type TC-ER cable rated at 90 degrees Celsius for wet and dry locations. The cable shall be sunlight- and weather-resistant. Cable shall comply with the requirements of UL 44. Provide cable in the size and quantity as specified above. Conductors shall be annealed copper per ASTM B3 and class B stranded per ASTM B8. The conductor insulation shall be flam-retardant Cross-Linked Polyethylene (XLPE). Ground wire shall be un-insulated bare annealed copper annealed copper per ASTM B3 and class B stranded per ASTM B8. Cable jacket shall be lead-free, flame-retardant, sunlight-resistant Polyvinyl Chloride (PVC). 2.7 Provide steel liquidtight strain relief cord connectors in the quantity and as specified for each type of cable specified above. PART 3 EXECUTION 3.1 RESPONSIBILITIES. 3.1.1 The Contractor shall furnish and deliver to Lock #10 at location specified in paragraph 3.2 DELIVERY, the panelboards, transfer switches, receptacles, cables and cable reliefs. 3.2 DELIVERY. 3.2.1 General. On or before November 1, 2010, the Contractor shall deliver the panelboards with circuit breakers, transfer switches, receptacles, cables and cable reliefs required by the provisions of this contract to: Lock and Dam 10 5 Lock and Dam Lane Guttenberg, IA 52052 3.3 Acceptance. Payment for electrical equipment shall be made upon acceptance at the designated point of shipment. Within five calendar days after delivery to the designated point of shipment, the items shall be inspected by the Government. The inspection shall include an accounting of the items delivered and a visual inspection to determine any possible damage during shipment. If this inspection reveals any defects or deviations from contract requirements which could render the items unsuitable for the use intended, the Contractor shall repair or replace each identified deficiency. In the event deficiencies cannot be acceptably corrected, the equipment will be subject to rejection. * * * * *