This Combined Synopsis/Solicitation opportunity from Department Of Veterans Affairs was posted on August 31, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

6515--RFQ - DISPOSABLE PERCUTANEOUS ANTENNA

Closed

36C24226Q0956Federal

Submission Closed09/04/2026, 08:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 334510

New

Federal

PINPOINT SIGMA SYS Manufacturing/SupplyThis subcontract involves the manufacturing and supply of the complete PINPOINT SIGMA SYS for prime contractors supporting DLA Mechanicsburg. The selected provider is responsible for procuring or manufacturing integrated hardware, software, and firmware in strict accordance with technical requirements, while maintaining the total equipment baseline configuration and conducting plant quality assurance. The final deliverable consists of one fully inspected and packaged unit. Compliance is a critical component of this effort, requiring the contractor to hold CMMC Level 1 certification. Additionally, all work must adhere to specific military standards, including MIL-STD-973, MIL-STD-130, MIL-STD-129, and MIL-STD-2073-1. The opportunity falls under NAICS code 334510 and is managed by the Department of Defense.

SPRMM1 DLA Mechanicsburg

POSTED

DEADLINE

FAULTFINDER ETS SYS Manufacturing/SupplyThis subcontract involves the manufacturing and supply of the complete FAULTFINDER ETS SYS for prime contractors supporting DLA Mechanicsburg. The scope of work includes the procurement or manufacture of integrated hardware, software, and firmware in strict accordance with technical requirements. The contractor is responsible for maintaining the total equipment baseline configuration and conducting comprehensive plant quality assurance to ensure the delivery of one fully inspected and packaged unit. Compliance is a critical component of this contract, requiring the provider to maintain CMMC Level 1 certification. Additionally, all deliverables must adhere to specific military standards, including MIL-STD-973, MIL-STD-130, MIL-STD-129, and MIL-STD-2073-1. The project falls under NAICS code 334510 and is managed through the Department of Defense.

SPRMM1 DLA Mechanicsburg

POSTED

DEADLINE

Ultrasound Diagnostic System, Hand Carried (USHC) - Prototype

Solicitation # W91CRB-RPP-USHC

The U.S. Army, through the Portfolio Acquisition Executive Maneuver Ground and Project Manager Maneuver Medical Devices, is soliciting prototype proposals for a hand-carried Ultrasound Diagnostic System (USHC). This effort is structured as a Direct Other Transaction Agreement under 10 U.S.C. 4022, meaning it is not a FAR-based contract. The government seeks a Commercial-Off-The-Shelf or Non-Developmental Item capable of supporting medical operations in austere Role of Care 3 environments, specifically for FAST exams, ultrasound-guided procedures, and ruling out deep vein thrombosis. Selected vendors must deliver two prototype units for operational and environmental testing in accordance with MIL-STD-810H. The system must be FDA cleared for human use, Trade Agreements Act compliant, and capable of operating on both CONUS and OCONUS power infrastructures. The estimated period of performance is twelve months, with prototype delivery expected 45 to 60 days after award. Evaluation is based on a comparative best-value methodology, prioritizing technical approach, performance compliance, reliability, schedule realism, and past performance over cost. Key requirements include MIL-STD-130N compliant IUID marking, NIST SP 800-171 cybersecurity compliance, and a minimum one-year warranty. Proposals must be submitted via DoD SAFE or secure email by November 6, 2026, and must adhere to strict page limits across four specific volumes. Notably, participants in this prototype agreement may be eligible for a noncompetitive follow-on production contract.

POSTED

DEADLINE

Specialized Medical Component FabricationThis subcontract for Specialized Medical Component Fabrication involves the production of precision components for medical devices focused on trauma care and fracture stabilization. Working under prime contractors for BARDA projects within the Department of Health and Human Services, the selected provider will utilize precision CNC machining and molding to fabricate hardware from biocompatible polymers and medical-grade alloys. The contract requires strict adherence to FDA regulatory compliance and ISO 13485 certification to ensure the quality of the finished medical device components. Performance will take place in Washington, with a response deadline set for November 18, 2026.

Barda - Aspr / Daappo / Barda Dcma

POSTED

DEADLINE

Automated Ultrasound-Based, Super Intelligence (SI)-Enabled Fracture Detection

Solicitation # BARDA-FY27-10192026

The Center for Biomedical Advanced Research and Development Authority (BARDA) has issued Sources Sought Notice BARDA-FY27-10192026 to identify innovative medical countermeasure technologies for the rapid triage of musculoskeletal injuries, such as fractures and soft tissue injuries of extremities. This request for information is intended for planning and market research purposes to assess commercially available or nearing-commercial technologies that utilize Super Intelligence (SI) and machine learning for automated ultrasound-based fracture detection. The goal is to find standalone, point-of-care devices that can operate in emergency departments, urgent care centers, and austere field settings without relying on traditional imaging infrastructure like X-ray or CT scans. The desired technology must feature automated volumetric capture, 3D-rotatable modeling, and SI-enabled image processing that outperforms human imaging experts and has undergone FDA 510k clearance processes. BARDA is interested in ruggedized, portable units with sufficient battery life for disaster response, interoperability with electronic health record systems, and minimal training requirements for non-specialist operators. Potential acquisition strategies being explored include direct purchases, leases, or vendor-managed inventory arrangements. Interested small businesses and other than small business concerns under NAICS code 334510 must submit their capabilities statements by 1:00 p.m. Eastern Time on November 18, 2026. Submissions must include separate Technical and Business Representation sections, each limited to 10 pages in 12-point Times New Roman font, and be emailed to Justin Moore and Richard Hall. Responses should detail the company's manufacturing capabilities within the United States, regulatory maturity, supply chain resilience, and cybersecurity standards for handling sensitive patient health information.

Barda - Aspr / Daappo / Barda Dcma

POSTED

DEADLINE

Supplier of Digital Levels and Survey AccessoriesThis subcontract agreement establishes a supplier for digital levels and non-core survey accessories to support prime contractors working on projects for the California Department of General Services and Caltrans. The scope of work includes the delivery of digital leveling equipment and a variety of catalog-based accessories, such as poles, prisms, and tripods, all of which must adhere to general land surveying industry standards. Managed under the DGS Statewide Procurement agency, the contract falls under NAICS code 334510. The solicitation was posted on October 20, 2026, with a response deadline set for November 2, 2026.

DGS - Statewide Procurement

POSTED

DEADLINE

Supplier of Robotic Total Stations and Spatial StationsThis subcontract agreement establishes a supplier for high-precision robotic total stations and spatial stations to support prime contractors working on California Department of General Services and Caltrans projects. The contract requires the delivery of new, latest-model equipment, specifically robotic total stations featuring reflectorless capabilities exceeding 50 meters and single prism capabilities exceeding 800 meters. Additionally, spatial stations must provide scan rates of 25,000 points per second and maintain an angular accuracy of 3 arcseconds. All provided equipment must strictly adhere to IEC 60825-1 and ANSI Z136.1 laser safety standards. Managed under the DGS Statewide Procurement agency with NAICS code 334510, the solicitation was posted on October 20, 2026, with a response deadline of November 2, 2026.

DGS - Statewide Procurement

POSTED

DEADLINE

Digital Tomosynthesis Veterinary X-Ray System SupplierThis subcontract involves the supply of a complete portable digital tomosynthesis-capable X-ray system for prime contractors working on City of Norfolk veterinary projects for the Zoo. The required equipment includes a portable X-ray generator, tube, a digital radiographic detector with a minimum size of 6x6 inches, a tomosynthesis workstation, necessary software, and mobile carts. To ensure seamless integration and accessibility, the system must be fully DICOM compatible, PACS-ready for storage, and the software must adhere to WCAG compliance standards. The successful supplier will deliver one fully functional imaging system backed by a one-year manufacturer warranty. This procurement falls under NAICS code 334510, with a response deadline set for November 2, 2026.

POSTED

DEADLINE

Public Safety and Emergency Services - Request for Quotes - CSD Biometrics Scanner

Solicitation # AB-2026-06949

Public Safety and Emergency Services is seeking quotes for the procurement of an in-cell biometric and contactless health-monitoring sensor system. This technology will be implemented at the Edmonton and Calgary Remand Centres to track critical vital signs, specifically heart rate and respiration, for individuals in custody. The solicitation, identified as AB-2026-06949, was posted on October 19, 2026, with a response deadline of November 2, 2026. The project will be performed within Alberta, and interested parties should coordinate with the primary procurement officer, Paul Dinh, for further inquiries.

Public Safety and Emergency Services

POSTED

DEADLINE

Defibrillator Electrode Pad SupplierThis subcontract opportunity is for a supplier to provide defibrillator electrode pads to prime contractors supporting Department of Defense contracts through the Medical Supply Chain MD Surg FSF. The selected provider must manufacture or source electrode pads that strictly adhere to NSN 6515-01-613-1594 specifications. The scope of work includes comprehensive commercial packaging and packing to ensure each unit is sealed in a suitable container for protection, meeting all DLA packaging requirements for medical acquisitions. Interested parties must respond by October 26, 2026, for this requirement categorized under NAICS code 334510.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Battery Test Set ManufacturingThis subcontract involves the manufacture and supply of 16 complete Battery Test Sets for prime contractors supporting the Department of Defense, specifically the DLA Weapons Support Nuclear Reactor Program. The scope of work includes the assembly, integration, and quality assurance testing of the units to ensure they meet the strict specifications required for NSN 6625-01-737-4917, utilizing specialized electronics assembly equipment and calibration tools. The project falls under NAICS code 334510 and will be performed in New Cumberland, Pennsylvania. Interested parties should note the response deadline of October 30, 2026, for this procurement effort.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

ADAPTER, AIRWAY, CAPNOME

Solicitation # SPE2DS-27-T-0778

Solicitation SPE2DS-27-T-0778 is issued by the Department of Defense Medical Supply Chain for the procurement of one box of hand-held capnometer airway adapters, NSN 6515-01-623-0942. These disposable, non-sterile, white plastic adapters are designed for adult and pediatric use and must have a maximum dead-space of 6.0 ml. Each box contains 25 units. The items are subject to a non-extendable shelf life of 60 months, with a requirement that no more than 9 months have elapsed from the date of manufacture to the date of delivery to the government. The contract specifies delivery within 20 days after receipt of order to the Commanding Officer Station Sar Lemoore in California, with FOB, inspection, and acceptance all set to destination. Packaging must comply with ASTM D3951 and DLA requirement RP001, while labeling must adhere to MIL-STD-129 and the latest MMS1A revision, including the manufacturer date, expiration or retest date, and contract/lot number. Bidders must specify the source and part number being supplied. The award is governed by NAICS code 334510 and incorporates various FAR and DFARS clauses, including the HUBZone price evaluation preference and strict cybersecurity reporting requirements under DFARS 252.204-7012.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

2 days ago

DEADLINE

in 5 days

AI Contract Overview

Solicitation 36C24226Q0956 is a Request for Quotation issued by the Department of Veterans Affairs Network Contracting Office 2 to procure twelve disposable, percutaneous microwave ablation antennas for the Margaret Cochran Corbin Healthcare System. The requirement is split equally between the Manhattan and Brooklyn campuses, with each location receiving two antennas each of 15 cm, 20 cm, and 30 cm lengths. These sterile, single-use consumables must be fully compatible with existing MWA generator platforms, cabling, and software controls, and must adhere to all federal, state, and local medical device regulations. This opportunity is a total set-aside for certified Service-Disabled Veteran-Owned Small Businesses (SDVOSB). The government will award the contract to a responsible offeror whose proposal is most advantageous, evaluating technical capability, past performance, and total price. Offers are due by September 4, 2026, at 4:00 PM EDT. Submissions must include the solicitation number, offeror details, UEI, and a signed limitations on subcontracting certificate of compliance. The contract incorporates various FAR and VAAR clauses, including specific deviations regarding commercial products, sustainable products, and domestic shipment packing requirements.