Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

80 -- ADHESIVE

Active
8040-01-458-2768Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract calls for the procurement of 19,200 units of a permanent, flexible, abrasion-resistant polyurethane rubber repair adhesive and waterproofing sealant, designed for bonding various materials such as Nylon, vinyl, polyester, Neoprene, canvas, wood, metal, and ceramic. The adhesive will be supplied in 1-ounce, factory-sealed, collapsible tubes with resealable screw-cap closures that prevent leakage or contamination during shipment and storage. The product, specifically McNett Corporation’s Seam Grip 10510, must have a shelf life of four years and be delivered with a maximum age of six months. Each unit must be clearly marked with lot or batch numbers, manufacture and reinspection dates, the manufacturer's name and part number, usage instructions, and proper storage guidelines. Packaging requirements include intermediate packaging of up to 25 units per corrugated fiberboard box meeting specific regulatory standards for freight classification and box strength. These boxes must then be packed in additional corrugated fiberboard boxes under the same standards. All packaging and unit loads must carry marking consistent with civilian or military delivery standards as applicable. The contract mandates domestic manufacture of the product, requests delivery in increments of 3,200 units every other month, and requires bids to be received by close of business on August 12, 2002. Bidders must specify FOB or destination terms and include a Material Safety Data Sheet (MSDS) with their submission.

General Info

Procurement of 19,200 McNett Seam Grip adhesive units, domestic manufacture, bi-monthly delivery, marked packaging.

Agency

N/A

NAICS

325520 - Adhesive Manufacturing

Place of Performance

Not specified

Set-Aside

NONE

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

Posted

special-notice

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyN/A
ContactsNo contacts available
OfficeN/A
Organization / Agency
N/A
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
QTY REQUESTED: 19,200/1 ORDER8040-01-458-2768 UI: TU ADHESIVE : DESCRIPTION A permanent, flexible, abrasion resistant, polyurethane rubber repair adhesive and waterproofing sealant for bonding to Nylon, vinyl, polyester, Neoprene, canvas, wood, metal, and ceramic. Size: The product shall be furnished in 1 oz quantities in factory-sealed, collapsible metal or plastic tubes having resealable screw-cap closures of the type normally used for this product provided that the there will be no interaction chemically or physically with the contents so as to damage the tube or alter the strength, quality, or purity of the contents. The filled tubes shall be closed in a manner that will insure that the contents will not spill or leak from the tube during shipment, handling, storage, and redistribution. Shelf life code: 8 (4 years) Maximum age on delivery: 6 months McNett Corporation, product Seam Grip 10510. ITEM MARKING Each item shall be marked with the following: (1) lot or batch number (2) dates of manufacture and reinspection (3) manufacturer's name and part number (4) instructions for use, thinning, mixing, shaking, etc. (5) instructions for storage, i.e. do not freeze, requires refrigeration, etc. PACKAGING INTERMEDIATE PACKAGING: Not more than 25 units packaged as specified above shall be further packaged in a close-fitting, corrugated fiberboard box conforming to Section 6(a), Rule 41 of the Uniform Freight Classification and Item 222 of the National Motor Freight Classification (200 minimum burst). Closure of the boxes shall be in accordance with Section 7 of Rule 41 of the Uniform Freight Classification. PACKAGING: Intermediate packaged boxes shall be packed in a close-fitting, corrugated fiberboard box conforming to Section 6(a), Rule 41 of the Uniform Freight Classification and Item 222 of the National Motor Freight Classification (200 minimum burst). Closure of the boxes shall be in accordance with Section 7 of Rule 41 of the Uniform Freight Classification. MARKING All unit, intermediate, transport packages and unit loads shall be marked for delivery to civilian activities in accordance with the FED-STD-123G, dated June 6, 1997, or marked for delivery to military activities in accordance with MIL-STD-129N, dated 15, May, 1997, as applicable. PLEASE SPECIFY FOB OR DESTINATION. ALL BIDS MUST BE RECEIVED BY COB 8-12-02. PRODUCT MUST BE MADE IN THE U.S.A. PLEASE FAX OR EMAIL BIDS TO: FAX# +1 (555) 000-0000 E-MAIL: contact@example.gov PLEASE INCLUDE MSDS. CUSTOMER IS REQUESTING DELIVERY OF 3200 EVERY OTHER MONTH.

Similar Contracts

Same NAICS industry code

NAICS: 325520
New
DIBBS
ADHESIVE
Solicitation # SPE8ES-27-T-0238
Solicitation SPE8ES-27-T-0238 is a Request for Quotations issued by the Defense Logistics Agency Troop Support Construction and Equipment for the procurement of two cartridges of a one-part, electrically conductive, amine-curing, silicone rubber adhesive-sealant. This black adhesive is used for bonding conductive rubber to metals, creating gaskets for EMI and RFI assemblies, and promoting electrostatic discharge in metal assemblies. The item is classified as a Type I (Code H) material with a non-extendable shelf life of 12 months and must be stored between 40 and 110 degrees Fahrenheit. Delivery is required within five days after receipt of order, with a required delivery date of October 30, 2026, shipped FOB Destination to the McAlester Army Ammo Plant in Oklahoma. The contract mandates strict adherence to hazardous materials regulations, requiring the submission of Safety Data Sheets and Hazard Communication Standard labels prior to award. Packaging must comply with MIL-STD-2073-1E and RP001, with a maximum of 25 cartridges per corrugated fiberboard box not exceeding 65 pounds. Marking must follow MIL-STD-129, specifically using Special Marking Code 32 for shelf-life items. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and compliance with various FAR and DFARS clauses, including the Buy American Act, safeguarding of covered defense information, and prohibitions on certain telecommunications equipment. Inspection and acceptance will occur at the destination.
Defense Logistics Agency

POSTED

about 20 hours ago

DEADLINE

in 5 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS