84--Simunition Gear

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. The solicitation number is DJF-19-0200-PR-0008349 and is issued as a Request for Quote (RFQ), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2019-06. The associated North American Industrial Classification System (NAICS) code for this procurement is 448190 with a small business size standard of $20.50M. This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids. The solicitation pricing on www.UnisonMarketplace.com will start on the date this solicitation is posted and will end on 2019-09-20 12:30:00.0 Eastern Time or as otherwise displayed at www.UnisonMarketplace.com. FOB Destination shall be Quantico, VA 22135 The Federal Bureau of Investigation requires the following items, Brand Name or Equal, to the following: LI 001: Ultimate Training Munitions (UTM) Helmet, 69-HELMET-BLACK - Full-face, anti-fogging helmet, allows for 180 degree visibility, Includes sweatband and neck wraps, can be worn with sunglasses or prescription eyewear Passes high velocity impact requirements of ANSI/ISEA Z87.1-2015. Face shield flips up, 13, EA; LI 002: Ultimate Training Munitions (UTM), 69-RPJKT-TAN-L/XL, ROLE PLAYER TAN JACKET L/XL Side hook & loop fasteners for size adjustment. Breathable nylon mesh, cushion padding. Front zipper. Includes red & green vests, 13, EA; LI 003: Ultimate Training Munitions (UTM), 69-RPJKT-TAN-M/L, ROLE PLAYER TAN JACKET M/L Side hook & loop fasteners for size adjustment. Breathable nylon mesh, cushion padding. Front zipper. Includes red & green vests, 13, EA; LI 004: Ultimate Training Munitions (UTM), 69-LEG-BLACK, LEGGINGS WITH GROIN PROTECTOR - Adjustable fit to various leg sizes Includes integrated, padded groin protector, 7, EA; LI 005: Ultimate Training Munitions (UTM), 69-0310-XL, PROTECTIVE GLOVES EXTRA LARGE - Adjustable, Unrestricted Trigger Finger for precise trigger control, flexible armor that does not inhibit the natural movement of the hands keeping hands unrestricted while protected from Non-Lethal Training Ammunition, 7, EA; LI 006: Ultimate Training Munitions (UTM), 69-3910-L, PROTECTIVE GLOVES LARGE - Adjustable, Unrestricted Trigger Finger for precise trigger control, flexible armor that does not inhibit the natural movement of the hands keeping hands unrestricted while protected from Non-Lethal Training Ammunition, 7, EA; LI 007: Ultimate Training Munitions (UTM), 69-0310-M, PROTECTIVE GLOVES MEDIUM - Adjustable, Unrestricted Trigger Finger for precise trigger control, flexible armor that does not inhibit the natural movement of the hands keeping hands unrestricted while protected from Non-Lethal Training Ammunition, 7, EA; LI 008: Ultimate Training Munitions (UTM), 69-GP-BLACKN - GROIN PROTECTOR - Padded mesh. Center strap & adjustable belt., 20, EA; LI 009: MECHANIX WEAR ORIGINAL GLOVE COVERT SMALL - Form-fitting fabric that helps keep hands cool and dry, adjustable wrist closures, reinforced thumb and index finger, Touchscreen capable Machine washable., 10, EA; LI 010: MECHANIX WEAR ORIGINAL GLOVE COVERT MEDIUM - Form-fitting fabric that helps keep hands cool and dry, adjustable wrist closures, reinforced thumb and index finger, Touchscreen capable Machine washable., 60, EA; LI 011: MECHANIX WEAR ORIGINAL GLOVE COVERT LARGE- Form-fitting fabric that helps keep hands cool and dry, adjustable wrist closures, reinforced thumb and index finger, Touchscreen capable Machine washable., 100, EA; LI 012: MECHANIX WEAR ORIGINAL GLOVE COVERT EXTRA LARGE - - Form-fitting fabric that helps keep hands cool and dry, adjustable wrist closures, reinforced thumb and index finger, Touchscreen capable Machine washable., 20, EA; LI 013: MECHANIX WEAR ORIGINAL GLOVE COVERT, EXTRA EXTRA LARGE (XXL)- - Form-fitting fabric that helps keep hands cool and dry, adjustable wrist closures, reinforced thumb and index finger, Touchscreen capable Machine washable., 10, EA; LI 014: MAXPEDITION, 0208, ROLLYPOLY & REG FOLDING DUMP POUCH (BLACK) - Holds 7 thirty round M16 magazines in horizontal or vertical positions, Cinch cord closure and flap Belt: Closed Loop, 300, EA; LI 015: SHIPPING, 1, EA; Solicitation and Buy Attachments ***Question Submission: Interested Offerers must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.UnisonMarketplace.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, Federal Bureau of Investigation intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, Unison, Inc. Unison Marketplace has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. Federal Bureau of Investigation is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids. All responsible Offerers that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.UnisonMarketplace.com. There is no cost to register, review procurement data or make a bid on www.UnisonMarketplace.com. Offerers that are not currently registered to use www.UnisonMarketplace.com should proceed to www.UnisonMarketplace.com to complete their free registration. Offerers that require special considerations or assistance may contact Marketplace Support at +1 (555) 000-0000 or via email at contact@example.gov. Offerers may not artificially manipulate the price of a transaction on www.UnisonMarketplace.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.UnisonMarketplace.com process or to collude with the intent or effect of hampering the competitive www.UnisonMarketplace.com process. Should Offerers require additional clarification, notify the point of contact or Marketplace Support at +1 (555) 000-0000 or contact@example.gov of Unison Marketplace: Buyers and Sellers agree to conduct this transaction through Unison Marketplace in compliance with the Unison Marketplace Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. New Equipment ONLY; NO remanufactured or "gray market" items. All items must be covered by the manufacturer's warranty. Bid MUST be good for 30 calendar days after close of Buy. This solicitation requires registration with the System for Award Management (SAM) at the time an offer or quotation is submitted, excluding the exceptions outlined in FAR 4.1102(a). Registration information can be found at www.sam.gov. Sellers understand that FedBid ranks all Bids by price; however, pursuant to applicable acquisition regulations and/or departmental guidelines, Buyers may use criteria other than price to evaluate offers. Accordingly, please note that, unless otherwise specified in the Buy Terms below, to the extent required by applicable regulations and/or guidelines, award will be made to the responsible Seller whose offer conforming to the solicitation will be most advantageous to the Buyer on the basis of price, technical capability, delivery, and past performance. No partial shipments are permitted unless specifically authorized at the time of award. Delivery must be made within 30 days or less after receipt of order (ARO). The offer must provide within its offer the number of days - not to exceed 30 - required to make delivery after it receives a purchase order from the buyer. In addition to providing pricing at www.FedBid.com for this solicitation, each Offer must provide any required, NON-PRICING responses (e.g. technical proposal, representations and certifications, etc.) so that they are received no later than the closing date and time for this solicitation. Submissions can be sent to contact@example.gov. The selected Offeror must comply with the following commercial item terms and conditions, which are incorporated herein by reference: FAR 52.212-1, Instructions to Offerors - Commercial Items, applies to this acquisition; FAR 52.212-3, Offeror Representations and Certifications - Commercial Items - the selected offeror must submit a completed copy of the listed representations and certifications; FAR 52.212-4, Contract Terms and Conditions - Commercial Items; FAR 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, paragraph (a) and the following clauses in paragraph (b): 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.225-13, 52.232-34. The full text of the referenced FAR clauses may be accessed electronically at https://www.acquisition.gov/far/. BRAND NAME OR EQUAL FAR 52.211-6 Aug. 1999 (a) If an item in this solicitation is identified as "brand name or equal", the purchase description reflects the characteristics and level of quality that will satisfy the Government’s needs. The salient physical, functional, or performance characteristics that "equal" products must meet are specified in the solicitation. (b) To be considered for award, offers of "equal" products, including "equal" products of the brand name manufacturer, must: (1) Meet the salient physical, functional, or performance characteristic specified in this solicitation; (2) Clearly identify the item by— (i) Brand name, if any; and (ii) Make or model number; (3) Include descriptive literature such as illustrations, drawings, or a clear reference to previously furnished descriptive data or information available to the Contracting Officer; and (4) Clearly describe any modifications the offeror plans to make in a product to make it conform to the solicitation requirements. Mark any descriptive material to clearly show the modifications. (c) The Contracting Officer will evaluate "equal" products on the basis of information furnished by the offeror or identified in the offer and reasonably available to the Contracting Officer. The Contracting Officer is not responsible for locating or obtaining any information not identified in the offer. (d) Unless the offeror clearly indicates in its offer that the product being offered is an “equal? product, the offeror shall provide the brand name product referenced in the solicitation. To be considered for award, all Sellers must be manufacturer/ Federally authorized distributors of the equipment/services they are offering with a demonstrated capability of delivering the entire order within the time frames specified by the Buyer on the award. Sellers may be required to provide documentation as proof of authorization to be considered for award.