Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

99--Sound Soak

Active
W909MY10Q0028Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The U.S. Army CECOM Contracting Center-Washington plans to negotiate a sole source contract with Advanced Global Construction for the installation of new sound soak materials. The work scope includes removing existing wood chair rail, cove base, affected suspended ceiling sections, and electrical fixtures such as light switches and outlets, followed by furnishing and installing sound soak on one conference room wall, three office walls, and an office door. All construction debris must be removed off-site. The installation is expected to be completed within five days, no later than October 29, 2010, and all personnel involved must have clearance from the CERDEC security office. The contract will be Firm Fixed Price and is justified under the authority allowing for non-competitive procurement based on the requirement that only one responsible source can fulfill the agency’s needs. Although this is a sole source intent, the government invites all interested and capable parties to express their interest or submit proposals by September 24, 2010. Responses must not exceed five pages and should be submitted in Microsoft Word format via email. Requests for additional information must be submitted in writing via email; phone inquiries will not be entertained. The government retains full discretion to decide whether to move forward with a competitive process based on the responses received. The contract falls under NAICS code 238390 and is managed by the Department of Defense office located in Alexandria, VA.

General Info

Sole source contract for sound soak installation by Advanced Global Construction, completion by October 29.

NAICS

238390 - Other Building Finishing Contractors

Place of Performance

VA

Set-Aside

NONE

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

Posted

special-notice

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → W6QK Acc-Apg Cont Ct Wash Ofc
ContactsNo contacts available
OfficeALEXANDRIA, VA, 22331-0700, USA
Office AddressALEXANDRIA, VA, 22331-0700, USA
ContactsNo contact information available

Full Description

Show more
The U.S. Army CECOM Contracting Center-Washington intends to negotiate with Advanced Global Construction, 44645 Guilford Drive, Ashburn, VA 20147 on a sole source basis for the installation of new sound soak. The effort shall include: removal of existing wood chair rail and cove base, removal of existing suspended ceiling affected by new construction, removal of light switches and outlet, furnish and installation of Sound Soak on 1 wall in a conference room, 3 walls and the door in an office, and the removal of all construction debris to a location off site. Installation shall take no longer than 5 days and shall be completed before 29 October 2010. All personnel must be cleared by the CERDEC security office. The resultant contract shall be Firm Fixed Price. The statutory authority for other than full and open competition is 10 U.S.C. 2304(c)(1); Only One Responsible Source and no Other Supplies or Services will Satisfy Agency Requirements. The notice of intent is not a request for proposals. However, all responsible sources may identify their interest and capability to respond to the requirement or submit proposals. All proposals received before 5:00 pm 24 September 2010 will be considered by the Government. Responses shall be no longer than five (5) pages and provided in Microsoft Word compatible format. Responses shall be submitted via email to contact@example.gov. All requests for further information must be in writing and via email to the above address. Telephone requests for additional information will not be honored. Acknowledgement of receipt will be issued. A determination by the Government not to compete this proposed contract based upon responses to this notice is solely within the discretion of the Government. Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement.

Similar Contracts

Same NAICS industry code

More opportunities from Department Of Defense → W6QK Acc-Apg Cont Ct Wash Ofc

Same awarding agency

NAICS: 335999
Federal
Power Distribution and Illumination Systems, Electrical (PDISE)
Solicitation # W909MY27RA001
The Department of the Army, through the Army Contracting Command-Aberdeen Proving Ground, has issued a Sources Sought and Request for Information for the build-to-print manufacture, assembly, and delivery of Power Distribution and Illumination Systems, Electrical (PDISE). These ruggedized, man-portable systems are designed to connect mobile power generation to mission equipment in harsh tactical environments. The potential requirement focuses on four specific configuration items: the M200 and M100 A/P Feeder Systems, the M40 A/P Distribution System, and the M46 Utility Assembly. All production must strictly adhere to Government Technical Data Packages and military standards, including MIL-DTL-53126 for general specifications, MIL-DTL-53072 for Chemical Agent Resistant Coating, and MIL-DTL-22992 for Class L connectors. The government is utilizing this market research phase to identify qualified large and small business sources under NAICS codes 335999 and 335313. Key areas of interest include industry production capacity, lead times for long-lead materials, and the ability to perform First Article Testing (FAT) within 360 days after contract award. Interested vendors must provide a detailed response by November 6, 2026, including corporate experience, technical capabilities, quality certifications such as ISO 9001:2015 or AS9100D, and Rough Order of Magnitude pricing for quantity ranges between 1 and 200 units. This information will be used to determine the final acquisition strategy and the feasibility of a small business set-aside.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

10 days ago

DEADLINE

in 8 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS