A--R&D- DEFENSE SYSTEM: ELECTRONICS/COMMUNICATION EQUIPMENT (ENGINEERING DEVELOPMENT)

The U.S. Army Contracting Command - New Jersey (ACC-NJ), on behalf of the U.S. Army Armament Research, Development and Engineering Center (ARDEC), intends to issue a sole source Request for Proposal (RFP) to Technovative Applications 3160A Enterprise Street Brea, CA 92821 pursuant to 10 U.S.C. 2304(c)(1), quote mark Only one responsible source and no other supplies or services will satisfy agency requirements quote mark as implemented by FAR 6.302-1(a)(2)(ii)(B) for the further research and development (R&D) related to interferometric radar technologies. The resultant contract shall be awarded as a single five (5) year, Cost-Plus-Fixed-Fee (CPFF), Indefinite-Delivery Indefinite-Quantity (IDIQ) with a total maximum ceiling value of $25,109,944.28. The applicable NAICS for this effort is: 541330 quote mark Engineering Services quote mark . The contractor shall provide all R&D, software development, and engineering services necessary to further investigate, design, develop, enhance, integrate, prototype, and test the search, acquire, track-and-compute tactical fire control capabilities of interferometric radar technologies to meet current and future operational threat gaps and performance requirements. The highest Distribution Level for this solicitation/contract is: Distribution Statement D 1. The quote mark Extended Area Protection and Survivability (EAPS) Integrated Demonstration (ID) Science and Technology (S&T) Program Security Classification Guide (SCG) quote mark dated 23 July 2010 is a Distribution Statement D document, detailed as follows: Distribution Statement D: Distribution authorized to the Department of Defense and U.S. DoD contractors only to protect technical data that addresses current technology in areas of significant military applications on 23 July 2010. Other requests shall be referred to U.S. Army Aviation and Missile Research, Development, and Engineering (RD&E) Center, ATTN: RDMR-WDS, Redstone Arsenal, AL 35898. The EAPS ID SCG contains information exempt from mandatory disclosure under FOIA. Exemption 2 applies. Export Control Warning: All technical documents that are determined to contain export-controlled technical data shall be marked quote mark WARNING - This document contains technical data whose export is restricted by the Arms Export Control Act (Title 22, U.S.C., Sec 2751, et. seq.) or the Export Administration Act of 1979, as amended, Title 50, U.S.C., App. 2401 et. seq. Violations of these export laws are subject to severe criminal penalties. Disseminate in accordance with provisions of DoD Directive 5230.25. quote mark When it is technically infeasible to use the entire statement, an abbreviated marking may be used, and a copy of the full statement added to the quote mark Notice To Accompany Release of Export-Controlled Data quote mark required by DoD Directive 5230.25. Destruction Notice: Destroy by any method that will prevent disclosure of contents or reconstruction of the document. 2. The quote mark Counter-Rocket, Artillery, and Mortar (C-RAM) Command and Control (C2) System RAM Warn Security Classification Guide (SCG) quote mark dated 6 March 2013 is a Distribution Statement D document, detailed as follows: Distribution Statement D: Distribution authorized to the Department of Defense (DoD) and DoD contractors only by reason of critical technology on 12 October 2005. Other requests shall be referred to Program Director, C-RAM, Building 5250, Martin Road, Redstone Arsenal, AL 35898. The C-RAM SCG contains information exempt from mandatory disclosure under FOIA. Exemption 2 applies. Export Control Warning: All technical documents that are determined to contain export-controlled technical data shall be marked quote mark WARNING - This document contains technical data whose export is restricted by the Arms Export Control Act (Title 22, U.S.C., Sec 2751, et. seq.) or the Export Administration Act of 1979, as amended, Title 50, U.S.C., App. 2401 et. seq. Violations of these export laws are subject to severe criminal penalties. Disseminate in accordance with provisions of DoD Directive 5230.25. quote mark When it is technically infeasible to use the entire statement, an abbreviated marking may be used, and a copy of the full statement added to the quote mark Notice To Accompany Release of Export-Controlled Data quote mark required by DoD Directive 5230.25. Destruction Notice: For classified documents, follow the procedure in DoD 5220.22-M, National Industrial Security Program, Operating Manual, Chapter 5, Section 7, or DoD 5200.1-R, Information Security Program Regulation, Chapter 6, Section 7. For unclassified, limited documents, destroy by any method that will prevent disclosure of contents or reconstruction of the document. 3. The quote mark Black Dart Counter-Unmanned Aircraft Systems (C-UAS) Demonstration Security Classification Guide (SCG) quote mark dated 1 June 2013 is a Distribution Statement C document, detailed as follows: Distribution Statement C: Distribution authorized to the U.S. Government agencies and their contractors only for administration and control of critical technology, DoDI 5230.24, 23 August 2012. Other requests for this document shall be referred to the Black Dart Project Manager, 1235 South Clark Street, Crystal Gateway 1 (CG1), Suite 1000, Arlington, VA 22202. The Black Dart SCG contains information exempt from mandatory disclosure under FOIA. Exemption 2 U.S.C. 552(B) (2) applies. Destruction Notice: Destroy by any method that will prevent disclosure of contents or reconstruction of document. To obtain a copy of the EAPS ID, C-RAM, and Black Dart SCGs: Interested parties to this solicitation shall mail/email a signed and approved copy of their quote mark Military Critical Technologies Data Agreement (DD Form 2345) quote mark or a copy of their applicable license issued by the U.S. Department of State if the offeror is a non U.S. company. After receipt of this document, the point of contact (POC) listed below will provide a quote mark Technical Data Questionnaire (AMSTA-AR Form 1350) quote mark and a quote mark Non-Disclosure and Non-Use Agreement quote mark to be completed and signed by the interested party. Once all documents are complete and received by the POC, the EAPS ID, C-RAM, and Black Dart SCGs will be provided. It is critical that interested parties provide these documents to initiate their request in a timely manner as a proposal submission date will not be extended based on an untimely request. U.S. Army Contracting Command - New Jersey ATTN: Jason Kenlan ACC-NJ-JA Bldg. 9, Phipps Road Picatinny Arsenal, NJ 07806-5000 contact@example.gov THIS SYNOPSIS DOES NOT CONSTITUTE A REQUEST FOR PROPOSAL (RFP). Further, this synopsis is not a guarantee of a future RFP and should not be construed as a commitment of any kind by the U.S. Government. Responses to this synopsis are not considered proposals and cannot be accepted by the Government to form a binding contract. The Government anticipates an RFP to be posted to the Army Single Face to Industry website https://acquisition.army.mil/asfi/default.cfm and FedBizOpps https://www.fbo.gov/ on or about 12 May 2015. The proposal submission date will be thirty (30) days after issuance of the RFP. The POC for this effort is Mr. Jason Kenlan, Contract Specialist, ACC-NJ-JA, contact@example.gov.