ABS Required IntermediateHullSurvey Number 4 Ultrasonic Thickness Gaugings

COMBINED SYNOPSIS/SOLICITATION This is a combined synopsis/solicitation for commercial items prepared in accordance with the format prescribed in Subpart 12.6 of the Federal Acquisition Regulation (FAR), as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. The solicitation number is N32205-13-R-1017, and it is being issued as a request for proposals (RFP). The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-61 effective 15 October 2012. This procurement is/is not being conducted as a small business set-aside, NAICS code 336611 with a small business size standard of 1000 applies. Military Sealift Command (MSC) - Norfolk, Norfolk, VA intends to award a firm-fixed price contract for USNS PATUXENT for the following service: 1.0 ABSTRACT 1.1 An ABS approved ESP Hull Gauging firm shall take and record 30,000 ultrasonic thickness readings on ship's hull, bulkheads, deck plating, scantlings, piping, and in other areas throughout the ship as required by the MSCREP, USCG, and ABS Surveyor. The requirements of the ABS Intermediate Hull Survey No.4 for Double Hull Tankers in the Enhanced Survey Program shall form the basis for this item. 2.0 REFERENCES/ENCLOSURES: 2.1 References: 2.1.1 NAVSEA Dwg No. 101-6580055, General Arrangement Outboard Profile. 2.1.2 NAVSEA Dwg No. 101-6581211, General Arrangement Inboard Profile. 2.1.3 NAVSEA Dwg No. 101-6580164, Scantling Plan 2.1.4 NAVSEA Dwg No. 101-6580165, Scantling Sections 2.1.5 NAVSEA Dwg No. 101-6580820, Shell Expansion TAO Double Hull. 2.1.6 NAVSEA Dwg. No. 101-6581216, General Arrangement of Tanks and Flats, Fwd. Fr. 60 2.1.7 NAVSEA Dwg. No. 101-6580059, General Arrangement of Tanks and Flats, Aft Fr. 60 2.1.8 NAVSEA Dwg. No. 101-6581214, General Arrangement Double Bottom (201, 204 and 203) 2.1.9 NAVSEA Dwg. No. 801-6580572, Capacity Plan (TAO-201 ONLY) 2.1.10 NAVSEA Dwg. No. 631-6580108, MSC "Paint Schedule" (Available onboard) 2.1.11 ABS Rules for Building and Classing Steel Vessels, Part 7, Rule Requirements for Survey After Construction Part 7, Chapter 3 Section 2. Tanker ESP 2.1.12 Intermediate Hull Survey 4, Survey Program - USNS PATUXENT (T-AO 201). 2.2 Enclosures: None 3.0 ITEM LOCATION/DESCRIPTION 3.1 Location/Quantity: 3.1.1 Location: Various locations throughout the vessel. 3.1.2 Quantity: 30,000 UT Readings 4.0 GOVERNMENT FURNISHED EQUIPMENT/MATERIAL/SERVICE: None. 5.0 NOTES 5.1 Period of Performance: 15 March 2013 through 28 March 2013 5.2 Location: Craney Island Fuel Depot, Portsmouth, VA 5.3 Point of Contact: Brendan Donovan Phone +1 (555) 000-0000 5.4 The attending ABS Surveyor shall specifically approve the firm selected to perform the gauge readings. Thickness measurements are to be carried out by a qualified company certified by the American Bureau of Shipping as an ABS approved ESP Hull Gauging Firm and under the supervision of the ABS Surveyor. 5.5 A copy of ABS certification shall be provided to Port Engineer and ABS Surveyor prior to start of work. The qualifications of the ABS approved ESP Hull Gauging Firm shall be provided to the MSCREP prior to the start of the audio gauging. 5.6 All audio gauging equipment shall be acceptable for use by the American Bureau of Shipping. 5.7 ABS Surveyor will recheck the measurements as deemed necessary to ensure acceptable accuracy. 5.8 NOTE: On a daily basis a copy of the Thickness Measurements taken on each given day will be turned over to the MSCREP for local attending ABS Surveyor review. 5.9 Detailed Unit Structural Drawings can be provided by MSC Tech Library upon request. 6.0 QUALITY ASSURANCE REQUIREMENTS 6.1 All work performed shall be to the satisfaction of the ABS, USCG, Port Engineer and the Chief Engineer. 7.0 STATEMENT OF WORK REQUIRED 7.1 Obtain and record 30,000 ultrasonic thickness gaugings to satisfy the requirements of ABS Intermediate Hull Survey #4 for Double Hull Tankers in the Enhanced Survey Program. Accomplish the Thickness Measurements (UT Gauging) in the ballast tanks, cargo tanks, miscellaneous tanks and locations listed in reference 2.1.12 in the presence of the ABS Surveyor(s) and Port Engineer as required in accordance with section 5.14.5 of reference 2.1.11 and reference 2.1.12. 7.1.1 The gaugings shall be taken during performance period at Craney Island Fuel Depot from 15 March 2012 through 28 March 2012. The gaugers shall be available to obtain gaugings during the duration of this performance period. 7.1.2 Thickness measurements are to be carried out by a qualified Thickness Measurement Firm certified by the American Bureau of Shipping as an ABS approved ESP Hull Gauging Firm. 7.1.3 Assistance to the Thickness Measurement Firm for access to the areas and/or structure to be gauged will be accomplished via ladders and rafting support for which shall be provided by a separate Service Order with a general ship repair contractor. 7.1.4 Contractor shall accomplish the thickness measurements in the areas and/or structure to be gauged in No.3 Port and Stbd Salt Water Ballast Tanks via alternate method as tank configuration limits access via rafting and ladders. 7.1.5 The gauging instruments shall be calibrated on site with certified blocks acceptable to the ABS Surveyor. 7.1.6 The contractor is to provide a unit price per shot up to a maximum of 30,000 Shots. Number of shots will be determined by quantity required by ABS. Unit price is to be used for decreasing the scope of the item as it relates to the number of shots required by ABS. 7.1.7 On a daily basis a copy of the Thickness Measurements taken on each given day will be turned over to the MSCREP for local attending ABS Surveyor review. 7.2 After completion of all thickness measurements required, a final typewritten report is to be prepared in ABS acceptable format in accordance with ABS Rules and Regulations and to the satisfaction of Local ABS Surveyor. Contractor shall provide five (5) copies of the final report. Three (3) copies are to be submitted to the ABS Surveyor, one (1) copy shall be submitted to the Port Engineer, and one (1) copy is to be submitted to the Vessel's Master. The final report shall give the location of measurements, the thickness measured as well as the original thickness, maximum allowable wastage and the actual percentage of wastage. The measuring equipment type, calibration certification and names of the persons taking the measurements and their qualifications shall also be included in the report. 7.2.1 Contractor shall submit final reports to the MSCREP within five (5) calendar days of completion of the ultrasonic readings. 7.3 The contractor shall develop and include in its report a composite drawing of location of each reading in relation to the frame numbers, seams and butt welds, plating, and internal structural members. 7.4 Contractor shall take thickness measurements at all web frames in all ballast tanks, all web frames in one cargo tank, one (1) web frame in remaining cargo tanks, all transverse bulkheads in all cargo tanks, all transverse bulkheads in all ballast tanks, all main deck plating within the amidships 0.5L or cargo area (whichever is longer), two (2) transverse sections (including at least one (1) in way of a ballast tank) within the amidships 0.5L, all plating in two (2) wind-and-water strakes (port and starboard full length), internals in forepeak and aftpeak tanks (including plating and stiffeners of tank bulkheads) and suspect areas throughout the vessel (as designated by attending ABS Surveyor) as directed by the Port Engineer and ABS Surveyor. 7.5 Painting 7.5.1 The Contractor shall repair all intact coatings disturbed during the accomplishment of this work item. The disturbed areas shall be coated with the systems specified in reference 2.1.10 using the paint product data sheets for surface preparation, environmental condition requirements, and dry film thickness. Paint will be provided by ships force. 8.0 GENERAL REQUIREMENTS: None additional. The following FAR and DFARS provisions and clauses apply to this solicitation and are incorporated by reference: 52.204-4 Printed or Copied Double-Sided on Postconsumer Fiber Content Paper 52.212-1 Instructions to Offerors-Commercial Items 52.212-3 Alt I Offerors Representations and Certifications-Commercial Items - (Offerors are advised to include a completed copy of this provision with their quote or a statement stating that it is available via the SAM website https://www.sam.gov/portal/public/SAM/) 52.212-4 Contract Terms and Conditions-Commercial Items 52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders - Commercial Items Clauses within 52.212-5 are hereby incorporated: 52.203-6 Restrictions on Subcontractor Sales to the Government 52.204-10 Reporting Subcontract Awards 52.209-6 Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment 52.219-8 Utilization of Small Business Concerns 52.219-28 Post-Award Small Business Program Rerepresentation 52.222-3 Convict Labor 52.222-19 Child Labor - Cooperation with Authorities and Remedies 52.222-21 Prohibition of Segregated Facilities 52.222-26 Equal Opportunity 52.222-35 Equal Opportunity for Veterans 52.222-36 Affirmative Action for Workers with Disabilities 52.222-37 Employment Reports on Special Disabled Veterans of the Vietnam Era, and Eligible Veterans 52.222-40 Notification of Employee Rights Under the National Labor Relations Act. 52.223-18 Contractor Policy to Ban Text Messaging while Driving 52.225-13 Restrictions on Certain Foreign Purchases 52.232-33 Payment by Electronic Funds Transfer- Central Contractor Registration 52.222-22 Previous Contracts and Compliance Reports 52.222-25 Affirmative Action Compliance 52.222-50 Combating Trafficking in Persons 52.233-4 Applicable Law for Breach of Contract Claim 52.232-99 Providing Accelerated Payment to Small Business Sub-contractors" (DEVIATION) (AUG 2012) 52.242-13 Bankruptcy 252.203-7002 Requirement to Inform Employees of Whistleblower Rights 252.203-7005 Representation Relating to Compensation of Former DoD Officials 252.204-7000 Disclosure of Information 252.204-7003 Control of Government Personnel Work Product 252.204-7004 Required Central Contractor Registration (Alternate A) 252.204-7008 Export-Controlled Items 252.209-7001 Disclosure of ownership or control by the government of a terrorist country 252.209-7999 Representation by Corporations Regarding an Unpaid Delinquent Tax Liability or a Felony Conviction under any Federal Law 252.211-7003 Item Identification and Valuation 252.212-7000 Offeror representations and certifications -Commercial items (Offerors are advised to include a completed copy of this provision with their quote or a statement stating that it is available via the SAM website) 252.212-7001 Contract Terms and Conditions Required to Implement Statutes or Executive Orders Applicable to Defense Acquisitions of Commercial Items Clauses within 252.212-7001 are hereby incorporated: 52.203-3 Gratuities 252.203-7000 Requirements Relating to Compensation of Former DoD Officials 252.225-7001 Buy American Act and Balance of Payments Program 252.225-7009 Restriction on Acquisition of Certain Articles Containing Specialty Metals 252.225-7012 Preference for Certain Domestic Commodities 252.232-7003 Electronic Submission of Payment Requests and Receiving Reports 252.247-7023 Transportation of Supplies by Sea. 252.225-7000 Buy American Act and Balance of Payment Program Certificate 252.232-7010 Levies on Contract Payments 252.243-7002 Requests for Equitable Adjustment The following FAR and DFARS provisions and clauses apply to this solicitation and are incorporated by full text: 52.212-1 (ADDENDUM) Additional Instructions to Offerors-Commercial Items 1. General Instructions Offerors shall submit proposal: Technical Proposal Price Proposal Technical Proposals The technical evaluation will be based on the following: Offeror is to provide statement that they are providing parts specified in combined synopsis/solicitation and/or a technical description of the items being offered in sufficient detail to evaluate compliance with the requirements in the solicitation. This may include product literature, or other documents, if necessary. Offeror is to provide statement that requested delivery date can be met. Past Performance Past performance for this procurement is waived IAW FAR 15.304(c)(3)(iii). Price and Other Business Considerations A separate unit price and extended price must be submitted for each line item in above table. The price proposal shall be evaluated in accordance with FAR 15.404-1(b) Responsible sources shall provide the following: 1. Price Proposal which identifies the requested item(s) and includes a separate unit price and extended price for each item in the above table. 2. Estimated time to delivery 3. Terms of any express warranty. 4. Total Firm Fixed Price 5. Remittance address, Tax Identification Number, DUNS number and Cage Code 6. A completed copy of the representations and certifications at FAR 52.212-3 Alternate I or a statement stating that they are available via the ORCA website, http://orca.bpn.gov. 7. REQUIREMENTS FOR SUBMISSION OF PROPOSALS: The offeror shall submit a technical and a price proposal (2 separate volumes). 8. A technical description of the items being offered in sufficient detail to evaluate compliance with the requirements in the solicitation. This may include product literature, or other documents, if necessary. 9. Responses to this combined synopsis/solicitation are due February 19 2013 at 1000 EST, Norfolk, VA. LATE PROPOSALS MAY NOT BE CONSIDERED FOR EVALUATION. Proposals may be e-mailed to contact@example.gov or faxed via +1 (555) 000-0000 Attn: David Foster. Please reference the solicitation number on your proposal. Primary Point of Contact: David Foster / contact@example.gov/ +1 (555) 000-0000 Secondary Point of Contact: Henry Bijak / contact@example.gov / +1 (555) 000-0000 10. Offers submitted in response to this solicitation shall not contain nor be subject to the offeror's standard commercial terms and conditions. Any offer submitted in response to this solicitation which includes the offeror's standard commercial terms and conditions may be considered a material defect and may be rejected as being non-responsive to the solicitation. (End of Addendum) 52.212-2 -- Evaluation -- Commercial Items (JAN 1999). (a) The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation that is determined to be the lowest evaluated price of proposals meeting or exceeding the acceptability standards for non-cost factors. The following factors shall be used to evaluate offers: (i) technical (ii) price; (b) Options. The Government will evaluate offers for award purposes by adding the total price for all options to the total price for the basic requirement. The Government may determine that an offer is unacceptable if the option prices are significantly unbalanced. Evaluation of options shall not obligate the Government to exercise the option(s). (c) A written notice of award or acceptance of an offer mailed or otherwise furnished to the successful offeror within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party. Before the offer's specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award. (End of Provision) 52.233-2 Service of Protest a) Protests, as defined in section 33.101 of the Federal Acquisition Regulation, that are filed directly with an agency, and copies of any protests that are filed with the Government Accountability Office (GAO), shall be served on the Contracting Officer (addressed as follows) by obtaining written and dated acknowledgment of receipt from Henry. contact@example.gov, N104-1, Bldg SP-64, 471 East C Street, Norfolk, VA. 23511. (b) The copy of any protest shall be received in the office designated above within one day of filing a protest with the GAO. (End of Provision) Addendum to 52.233-2 Service of Protest Interested parties may request an independent review of their protest as an alternative to consideration by the contracting officer or as an appeal of the contracting officer's decisions on their protest. See FAR 33.103. Requests for independent review shall be addressed to Code N10 or N10X, Military Sealift Command, 914 Charles Morris Ct SE, Washington Navy Yard, DC 20398-5540. MSC encourages potential protestors to discuss their concerns with the contracting officer prior to filing a protest. 52.252-1 Solicitation Provisions Incorporated by Reference (FEB 1998) This solicitation incorporates one or more solicitation provisions by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. The offeror is cautioned that the listed provisions may include blocks that must be completed by the offeror and submitted with its quotation or offer. In lieu of submitting the full text of those provisions, the offeror may identify the provision by paragraph identifier and provide the appropriate information with its quotation or offer. Also, the full text of a solicitation provision may be accessed electronically at this/these address (es): http://www.arnet.gov/far. (End of Provision) 52.252-2 Clauses Incorporated by Reference (FEB 1998) This contract incorporates one or more clauses by reference with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address (es): http://www.arnet.gov/far. (End of Provision) 52.252-6 Authorized Deviations in Clauses Authorized Deviations in Clauses (Apr 1984) (a) The use in this solicitation or contract of any Federal Acquisition Regulation (48 CFR Chapter 1) clause with an authorized deviation is indicated by the addition of "(DEVIATION)" after the date of the clause. (b) The use in this solicitation or contract of any clause with an authorized deviation is indicated by the addition of "(DEVIATION)" after the name of the regulation. (End of Clause) SYSTEM FOR AWARD MANAGEMENT (SAM) (a) Definitions. As used in this clause- "Central Contractor Registration (CCR) database" means the retired primary Government repository for Contractor information required for the conduct of business with the Government. "Commercial and Government Entity (CAGE) code" means- (1) A code assigned by the Defense Logistics Agency (DLA) Logistics Information Service to identify a commercial or Government entity; or (2) A code assigned by a member of the North Atlantic Treaty Organization that DLA records and maintains in the CAGE master file. This type of code is known as an "NCAGE code." "Data Universal Numbering System (DUNS) number" means the 9-digit number assigned by Dun and Bradstreet, Inc. (D&B) to identify unique business entities. "Data Universal Numbering System+4 (DUNS+4) number" means the DUNS number means the number assigned by D&B plus a 4-character suffix that may be assigned by a business concern. (D&B has no affiliation with this 4-character suffix.) This 4-character suffix may be assigned at the discretion of the business concern to establish additional SAM records for identifying alternative Electronic Funds Transfer (EFT) accounts (see the FAR at Subpart 32.11) for the same concern. "Registered in the SAM database" means that- (1) The Contractor has entered all mandatory information, including the DUNS number or the DUNS+4 number, into the SAM database; (2) The Contractor's CAGE code is in the SAM database; and (3) The Government has validated all mandatory data fields, to include validation of the Taxpayer Identification Number (TIN) with the Internal Revenue Service (IRS), and has marked the record "Active". The Contractor will be required to provide consent for TIN Attachment, Page 1 of 4 validation to the Government as a part of the SAM registration process. "System for Award Management (SAM)" means the primary Government repository for prospective federal awardee information and the centralized Government system for certain contracting, grants, and other assistance related processes. It includes- (1) Data collected from prospective federal awardees required for the conduct of business with the Government; (2) Prospective contractor submitted annual representations and certifications in accordance with FAR Subpart 4.12; and (3) The list of all parties suspended, proposed for debarment, debarred, declared ineligible, or excluded or disqualified under the nonprocurement common rule by agencies, Government corporations , or by the Government Accountability Office. (b)(1) By submission of an offer, the offeror acknowledges the requirement that a prospective awardee shall be registered in the SAM prior to award, during performance, and through final payment of any contract, basic agreement, basic ordering agreement, or blanket purchasing agreement resulting from this solicitation. (2) The SAM registration shall be for the same name and address identified on the contract, with its associated CAGE code and DUNS or DUNS+4. (3) If indicated by the Government during performance, registration in an alternate system may be required in lieu of SAM. (c) If the Contractor does not have a DUNS number, it should contact Dun and Bradstreet directly to obtain one. (1) A contractor may obtain a DUNS number- (i) Via the internet at http://fedgov.dnb.com/webform or if the contractor does not have internet access, it may call Dun and Bradstreet at +1 (555) 000-0000 if located within the United States; or (ii) If located outside the United States, by contacting the local Dun and Bradstreet office. The contractor should indicate that it is a contractor for a U.S. Government contract when contacting the local Dun and Bradstreet office. (2) The Contractor should be prepared to provide the following information: (i) Company legal business name. (ii) Tradestyle, doing business, or other name by which your entity is commonly recognized. (iii) Company physical street address, city, state and Zip Code. (iv) Company mailing address, city, state and Zip Code (if separate from physical). (v) Company telephone number. (vi) Date the company was started. (vii) Number of employees at your location. (viii) Chief executive officer/key manager. (ix) Line of business (industry). (x) Company Headquarters name and address (reporting relationship within your entity). (d) Reserved. (e) Processing time for registration in SAM, which normally takes five business days, should be taken into consideration when registering. Contractors who are not already registered should consider applying for registration at least two weeks prior to invoicing. (f) The Contractor is responsible for the accuracy and completeness of the data within the SAM database, and for any liability resulting from the Government's reliance on inaccurate or incomplete data. To remain registered in the SAM database after the initial registration, the Contractor is required to review and update on an annual basis from the date of initial registration or subsequent updates its information in the SAM database to ensure it is current, accurate and complete. Updating information in the SAM does not alter the terms and conditions of this contract and is not a substitute for a properly executed contractual document. (g) (1)(i) If a Contractor has legally changed its business name, "doing business as" name, or division name (whichever is shown on the contract), or has transferred the assets used in performing the contract, but has not completed the necessary requirements regarding novation and change-of-name agreements in Subpart 42.12, the Contractor shall provide the responsible Contracting Officer sufficient documentation to support the legally changed name with a minimum of one business day's written notification of its intention to- (A) Change the name in the SAM database; (B) Comply with the requirements of subpart 42.12 of the FAR; and (C) Agree in writing to the timeline and procedures specified by the responsible Contracting Officer. (ii) If the Contractor fails to comply with the requirements of paragraph (g) (1) (i) of this clause, or fails to perform the agreement at paragraph (g) (1) (i) (C) of this clause, and, in the absence of a properly executed novation or change-of-name agreement, the SAM information that shows the Contractor to be other than the Contractor indicated in the contract will be considered to be incorrect information within the meaning of the "Suspension of Payment" paragraph of the electronic funds transfer (EFT) clause of this contract. (2) The Contractor shall not change the name or address for EFT payments or manual payments, as appropriate, in the SAM record to reflect an assignee for the purpose of assignment of claims (see FAR Subpart 32.8, Assignment of Claims). Assignees shall be separately registered in the SAM database. Information provided to the Contractor's SAM record that indicates payments, including those made by EFT, to an ultimate recipient other than that Contractor will be considered to be incorrect information within the meaning of the "Suspension of payment" paragraph of the EFT clause of this contract. (h) Contractors may obtain information on registration and annual confirmation requirements via the SAM accessed through https://www.acquisition.gov or by calling +1 (555) 000-0000, or +1 (555) 000-0000 for international calls. WOOD PACKAGING MATERIAL (WPM) - ADDITIONAL DELIVERY INSTRUCTIONS: In accordance with the requirements of International Standards for Phytosanitary Measures (ISPM) 15, the following commercial heat treatment process has been approved by the American Lumber Standards Committee (ALSC) and is required for all Wood Packaging Material (WPM). WPM is defined as wood pallets, skids, load boards, pallet collars, wooden boxes, reels, dunnage, crates, frames, and cleats. Packaging materials exempt from the requirements are materials that have undergone a manufacturing process such as corrugated fiberboard, plywood, particleboard, veneer and oriented strand board. All WPM shall be constructed from Heat Treated (HT to 56 degrees Centigrade for 30 minutes) lumber and certified by an accredited agency recognized by the ALSC in accordance with Wood Packaging Material Policy and Wood Packaging Material Enforcement Regulations (see URL: http://www.alsc.org). All materials must include certification markings in accordance with ALSC standards and be placed in an unobstructed area that will be readily visible to inspectors. Pallet markings shall be applied to the stringer or block on diagonally opposite sides and ends of the pallet and be contrasting and clearly visible. All dunnage used in configuring and/or securing the load shall also comply with ISPM 15 and be marked with an ALSC approved "DUNNAGE" stamp. Failure to comply with the requirements of this restriction may result in refusal, destruction, or treatment of materials at the point of entry. (End of instructions) SHIP & BASE ACCESS (SEP 2011) Vendors are responsible for correctly submitting forms/applications. Vendors are encouraged to monitor email using "Request a Read Receipt" function and to confirm receipt of facsimile transmissions. Due to enhanced security measures, ship and base access is required for pre-award ship visits (e.g. ship-check) and for contract performance. Specifically the following permissions are required: 1. El Paso Intelligence Center (EPIC) personnel screening requirement 2. Base/Repair Facility Access Request 3. Vehicle Access Request 4. Ship Access List (vendor-provided) All forms are available for download on the MSC contracts webpage at http://www.msc.navy.mil. Click on "Contracts" in the upper right corner. "EPIC template" is under "Reference" subheading. Click on "Online Library of Common Documents" for all other forms. EPIC: Required for access to MSC vessels. Complete EPIC form strictly adhering to format requirements and forward to (CONUS East Coast repairs) MSFSC(underscore)EPIC(underscore)contact@example.gov and (CONUS West Coast and HI repairs) contact@example.gov. EPIC personnel screening requests are desired seven calendar days prior to performance start date. Requests will be managed as expeditiously as circumstances permit. Vendor will be notified by MSFSC of personnel who are denied access to the vessel. Base/Repair Facility Access: Permit is required to access Navy facilities. Base/Repair Facility Access Request is desired seven days prior to ship check or performance start date. Submit forms per the document instruction and to the Port Engineer. A courtesy copy (CONUS West Coast performance locations only) to Ermanno Magliulo, Engineering Director, at contact@example.gov will be appreciated. RAPIDGate is being implemented for access to DoD facilities in CONUS, HI, Guam and Puerto Rico. Vendor is responsible to acquire RAPIDGate status and destination base individual access badge(s) activation prior to performance start date. Delays that may result from inadequate planning are contractor responsibility. Vendor instructions and program information is available at http://www.RAPIDGate.com or tel. +1 (555) 000-0000. RAPIDGate access requires (in succession) (1) Individual Base Commander approval for vendor to access base, (2) Successful vendor RAPIDGate company annual enrollment, (3) Company employee individual enrollment and possession of RAPIDGate identification badge for single base or multiple base (enterprise) access. Vendor is responsible to confirm that each employee held annual RAPIDGate badge is active for the specific facility and performance period in accordance with RAPIDGate User Agreement (http://www.RAPIDGate.com). Additional access permissions may be required such as Navy Base Point Loma "Enclave Access request form". Vehicle Access: Required for vehicle access to Navy facilities. Follow supplemental instructions on Base Access forms or base-specific vehicle access forms. Ship Access List* (Vendor-Provided): On company letterhead attachment via email, the vendor is required to provide the ship master (courtesy copy the Port Engineer) with an accurate, current list of performing personnel prior to being admitted aboard the vessel. Under no circumstances will a hand-delivered list be accepted. (End of instructions) 252.232-7006 WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JUN 2012) (a) Definitions. As used in this clause-- Department of Defense Activity Address Code (DoDAAC) is a six position code that uniquely identifies a unit, activity, or organization. Document type means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF). Local processing office (LPO) is the office responsible for payment certification when payment certification is done external to the entitlement system. (b) Electronic invoicing. The WAWF system is the method to electronically process vendor payment requests and receiving reports, as authorized by DFARS 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports. (c) WAWF access. To access WAWF, the Contractor shall-- (1) Have a designated electronic business point of contact in the Central Contractor Registration at https://www.acquisition.gov; and (2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this Web site. (d) WAWF training. Th...