This Government Contract opportunity from Government of Canada was posted on April 28, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Accredited Calibration Services

Closed

International

Submission Closed05/13/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541380

New

Geotechnical and Materials Testing Services for Waterline Replacement Project in Hemet, CA

Solicitation # CIP 5661

Albert A. Webb Associates is seeking qualified small and disadvantaged business firms to serve as a subconsultant for the Oakland and Santa Fe Waterline Replacement project (CIP 5661) in Hemet, California. The anticipated scope of work involves providing geotechnical and materials inspection and testing services throughout a construction period estimated at 210 working days. Specific responsibilities include material and compaction testing for roadway subgrade, aggregate base, trench backfill, pipe bedding, and trench bottom, as well as initial sampling, acceptance testing, and the preparation of a certification memorandum signed by a professional engineer to identify any non-complying materials. The subcontract award is contingent upon Webb Associates being selected by the City of Hemet. Because the project is funded in part by a U.S. Environmental Protection Agency Community Grant, the selected firm must comply with rigorous federal and state requirements. These include EPA Disadvantaged Business Enterprise (DBE) requirements under 40 CFR Part 33, procurement standards under 2 CFR § 200.321, and the Build America, Buy America Act. Additionally, the consultant must adhere to California prevailing wage laws, maintain Department of Industrial Relations (DIR) registration, and meet specific insurance requirements, including a minimum general liability of $2,000,000 per occurrence. Interested firms are required to submit a technical proposal, a fee proposal, and documentation of their small or disadvantaged business certifications via PlanetBids by the specified deadline.

Albert A. Webb Associates

POSTED

DEADLINE

Acoustic Emission Testing Equipment for Coal Mine Roof Safety

Solicitation # 75D301-26-Q-79226

The CDC's National Institute for Occupational Safety and Health is seeking to acquire a complete Acoustic Emission Testing Equipment system for coal mine roof safety under solicitation 75D301-26-Q-79226. The required equipment consists of a four-channel data acquisition system, signal conditioners with root-mean-square output, AE sensors, software licenses, and all necessary cabling. The final system must be delivered to the Pittsburgh Mining Research Division in Pennsylvania within 60 calendar days of the award. This acquisition is intended as a sole-source procurement from MISTRAS Group, Inc., as market research indicates they are the only source capable of providing the fully integrated system. While intended for MISTRAS, the solicitation is posted on SAM.gov to allow all responsible sources to submit quotations by the deadline of September 23, 2026. The procurement falls under NAICS code 541380 and is managed by the CDC Office of Acquisition Services.

CDC Office Of Acquisition Services

POSTED

DEADLINE

Shasta Trinity NF Drinking Water Sampling & Testing

Solicitation # 127EAY26Q0136

The USDA Forest Service is soliciting quotes for solicitation 127EAY26Q0136 to provide water quality sampling, testing, notification, and monthly reporting for potable water systems at administrative sites within the Shasta-Trinity National Forest. This total small business set-aside under NAICS 541380 is a firm-fixed price requirements contract consisting of a one-year base period and two one-year option periods, with a total duration not to exceed three years and a potential six-month extension. The scope includes routine bacteriological and chemical sampling, including coliform, E. coli, and PFAS testing, in accordance with California Code of Regulations Title 22 and US Forest Service policy. Qualified contractors must utilize a laboratory facility with current State of California and/or US EPA certifications. Personnel performing the sampling must hold at least a level one California distribution system operator certification or possess equivalent specialized experience and education. Quotes are due by September 25, 2026, at 4:30 pm PDT and must be emailed to margaret.forrest@usda.gov. Evaluation will be based on technical acceptability and fair and reasonable pricing for the base period, all option periods, and a potential six-month extension. Awardees must comply with applicable Service Contract Act wage determinations for Shasta, Siskiyou, and Trinity counties and utilize the Government's Invoice Processing Platform for payments.

POSTED

DEADLINE

DI-ELECTRIC TESTING SERVICES OF EQUIPMENT AND VEHICLES

Solicitation # PAN413-26-P-0000-026951

This Sources Sought Notice is a market research effort by the Department of Defense to identify qualified firms capable of providing di-electric testing services for equipment and vehicles at Fort Shafter and Schofield Barracks in Hawaii. The scope of work includes semi-annual ground analysis testing for 40 pairs of electrical protective gloves and annual ground analysis testing for various assets, including ten hot sticks, one line truck, and five bucket trucks with liners of varying capacities. Interested firms under NAICS code 541380 must submit a capability statement to Angela McColor by September 30, 2026, at 10:00 a.m. HST. The submission must include the firm's intent to quote, contact information, Cage Code, Unique Entity Identifier, business size category, and a detailed statement of capabilities. This announcement is for planning purposes only and does not constitute a formal solicitation or a commitment to award a contract.

POSTED

DEADLINE

Environment and Protected Areas - Request for Proposal - Laboratory Analysis of Polycyclic Aromatic Compounds in Biological Tissues

Solicitation # AB-2026-06378

The Resource Stewardship Division of Alberta Environment and Protected Areas is seeking a qualified commercial laboratory to perform analytical services for polycyclic aromatic compounds in biological tissues, specifically focusing on whole fish and fish tissue samples. This project supports environmental monitoring programs within the Alberta Oil Sands Region to evaluate the spatial and temporal distribution of parent and alkylated PACs in aquatic ecosystems and assess changes relative to baseline data. The selected contractor will be responsible for the receipt, homogenization, extraction, and analysis of these biological samples according to specific analytical requirements. This solicitation, identified as AB-2026-06378, was posted on September 18, 2026, with a response deadline of October 13, 2026. The primary point of contact for this requirement is the Fish Monitoring Biologist, Keegan Hicks.

Environment and Protected Areas

POSTED

DEADLINE

Concrete Field Sampling and Testing ServicesThis subcontract for Concrete Field Sampling and Testing Services involves providing quality control testing for prime contractors on bridge projects within the Town of Wasaga Beach. The selected provider will be responsible for conducting field sampling and laboratory testing, utilizing slump cones and compression testing machines in strict accordance with CAN/CSA A23.1 standards. The scope of work includes the delivery of comprehensive concrete test reports and the formal certification of strength. Interested parties must respond by the deadline of October 2, 2026, for this opportunity associated with NAICS code 541380.

POSTED

DEADLINE

Quality Assurance & Material TestingThis subcontract for Quality Assurance and Material Testing is issued by the Virginia Public Works Capital Development agency for irrigation projects within the City of Charlottesville. The selected qualified testing agency will be responsible for performing independent material testing and inspections for prime contractors, which includes conducting field inspections of substrates and installation procedures to ensure all work complies with project specifications. The primary deliverable for this contract is the production of certified inspection and material test reports. Interested parties must submit their responses by October 9, 2026, in accordance with NAICS code 541380.

Public Works - Capital Development

POSTED

DEADLINE

Geologic Laboratory Testing and AnalysisThis subcontract for Geologic Laboratory Testing and Analysis supports prime contractors on New Hampshire Department of Environmental Services projects. The scope of work involves performing laboratory analysis on rock samples to determine unit petrogenesis through the use of chemical analysis tools, X-ray diffraction, and thin-section microscopy. The selected provider must adhere to standard geologic laboratory reporting protocols and is responsible for delivering both digital analysis files and original laboratory reports. This opportunity was posted on September 18, 2026, with a response deadline of October 19, 2026, under NAICS code 541380.

Department Of Environmental Services

POSTED

DEADLINE

Specialized Termite Treatment & ControlThis subcontract for Specialized Termite Treatment and Control supports prime contractors on State of Alabama NorthEast agency projects. The scope of work involves performing specialized soil treatment and structural fumigation, including termite inspections, moisture mapping, liquid soil barrier trenching, and the installation of baiting systems. These tasks require the use of moisture meters and soil injection equipment to deliver termite-treated perimeters and official warranty certificates. To be eligible for this contract, providers must hold a specialized Alabama Termite License. The opportunity is categorized under NAICS code 541380 and was posted on September 18, 2026, with a response deadline of September 23, 2026.

POSTED

DEADLINE

General Pest Control ServicesThis subcontract for General Pest Control Services involves providing comprehensive pest management for prime contractors supporting the State of Alabama NorthEast agency in Etowah and Calhoun. The scope of work includes routine interior and exterior inspections, the application of pesticides, baits, and traps, and the execution of Integrated Pest Management strategies utilizing commercial-grade equipment and rodent bait stations. The primary objective is to maintain pest-free facilities and provide periodic service reports to document activities. To be eligible for this contract, the provider must hold a valid Alabama State Pesticide Applicator License. The opportunity is categorized under NAICS code 541380 and was posted on September 18, 2026, with a response deadline of September 23, 2026.

POSTED

DEADLINE

First Article Testing (FAT) and EvaluationThis subcontract opportunity, posted by the Department of Defense ASC Supplier Oper AE and AF Div, requires a provider to perform First Article Testing (FAT) for prime contractors on DLA Aviation projects. The primary objective is to validate structural plates by conducting testing in accordance with Section E08 and Drawing NR 98897. The selected provider must utilize specialized equipment to verify dimensional accuracy and structural integrity, and they must maintain certified testing laboratory status or possess approved in-house manufacturer capabilities. The final deliverables for this contract include the FAT Evaluation Report and certified test results. This is a Total Small Business Set-Aside under NAICS code 541380. Interested parties must submit their responses by the deadline of October 19, 2026.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Production Lot Testing and Quality ValidationThis subcontract, titled Production Lot Testing and Quality Validation, is a total small business set-aside under the Department of Defense for the Nuclear Reactor Program. The project involves performing Production Lot Testing for prime contractors on DLA/NAWC aircraft launch recovery equipment, specifically validating the quality conformance of manufactured switches. Following first article approval, the contractor will test the first lot of up to 100 pieces against Technical Data Package sampling plans using specialized laboratory equipment to meet ALRE Critical Application standards. The performance of this contract will take place in San Diego, California. The selected provider is responsible for delivering a government-acceptable Final Test Report. This opportunity falls under NAICS code 541380 and has a response deadline of September 30, 2026.

NUCLEAR REACTOR PROGRAM

POSTED

1 day ago

DEADLINE

in 11 days

AI Contract Overview

The contract requires the provision of ISO/IEC 17025-accredited calibration services for each temperature scanner prior to delivery, ensuring all instruments meet internationally recognized standards for measurement correctness and reliability. Each calibration must include detailed as-found and as-left data, a comprehensive uncertainty analysis, and a formal certificate of conformance that verifies compliance with specified technical requirements. The work must be performed to support the operational readiness of equipment used by the Department of National Defence, with performance taking place in Gatineau. The solicitation is structured as a subcontract under NAICS code 541380, indicating it falls within the category of other scientific and technical consulting services, and is issued by the Government of Canada. Bidders must submit their proposals by May 13, 2026, with no set-aside provisions specified, meaning all eligible vendors may compete for the award.

General Info

ISO/IEC 17025-accredited calibration of temperature scanners with certification for Department of National Defence.

Agency

Government of Canada → Department of National Defence

NAICS

541380 - Testing Laboratories and ServicesView NAICS

Place of Performance

Gatineau, CAN

Set-Aside

NONE

Documents

This scope was carved out of W8486-270824/A.

The full solicitation package (3 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Fluke Super-DAQ Precision Temperature Scanner

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed

PostedApr 28

subcontract

Response DeadlineMay 13

Deadline has passed

Submission Closed

05/13/2026, 07:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyGovernment of Canada → Department of National Defence

ContactsNo contacts available

OfficeN/A

Organization / Agency

Government of Canada → Department of National Defence

Office AddressN/A

ContactsNo contact information available

Full Description

Provide ISO/IEC 17025-accredited calibration for each temperature scanner prior to delivery, including as-found/as-left data, uncertainty analysis, and certificate of conformance.

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS