Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, December 9 at 2:00 PM ET

Register Free →

This Subcontract opportunity from Department Of Defense was posted on September 29, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

ACM Abatement and Disposal (Hatch Panel Doors)

Closed
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

AI Contract Overview

Show more

This subcontract involves the removal, abatement, and off-site disposal of up to 150 lbs of asbestos-containing gaskets from isolated phase bus hatch panel doors for USACE Portland District projects. The selected contractor will be responsible for implementing full asbestos containment, utilizing required personal protective equipment, and ensuring the transport of hazardous waste to approved facilities via certified means. Final deliverables include the successful removal of the material and the provision of all disposal manifests. Managed under the Department of Defense and the W071 Endist Portland agency, the project falls under NAICS code 562910. A critical compliance requirement for this engagement is CMMC Level 2 self-verification. The response deadline for this opportunity is October 26, 2026, with performance centered in the 97058 zip code area.

General Info

Asbestos removal and disposal for USACE Portland projects; CMMC Level 2 required.

NAICS

562910 - Remediation Services

Place of Performance

OR, 97058

Set-Aside

NONE

Documents

This scope was carved out of W9127N27QA002.

The full solicitation package (19 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

TDA Isolated Phase Bus and Duct Inspection

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

This one is closed. Find the next one like it.

Open contracts like this one, right now:

  • Asbestos & Lead AbatementOpen now
  • Los Alamos Legacy Cleanup Contract (LLCC)Open now
See open contracts like this

Ask CLEATUS

I've read this contract. Ask me anything.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → W071 Endist Portland
ContactsNo contacts available
OfficeN/A
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Performs removal, abatement, and off-site disposal of Asbestos Containing Material (ACM) for prime contractors on USACE Portland District projects. Abates up to 150 lbs of asbestos-containing gaskets from isolated phase bus hatch panel doors and transports material to approved facilities. Requires asbestos containment, PPE, and certified hazardous waste transport. Requires CMMC Level 2 self-verification. Delivers ACM removal and disposal manifests.

More opportunities from Department Of Defense → W071 Endist Portland

Same awarding agency

NAICS: 237990
New
Federal
NAVIGATION LOCK TAINTER VALVE (TV) REPAIR, TV1
Solicitation # W9127N27BA010
The U.S. Army Corps of Engineers Portland District is soliciting firm-fixed-price bids for the repair and rehabilitation of Tainter Valve TV1 at The Dalles Lock and Dam in Dallesport, Washington. This full and open competition project has an estimated construction magnitude between $1,000,000 and $5,000,000. The scope of work includes mobilization, inspection, transport, and the actual repair of the valve, with a total performance period of 323 calendar days from the date of the Notice to Proceed. Key technical requirements include adherence to EM 385-1-1 safety standards, AWS D1.6/D1.6M stainless steel welding specifications, and a strict quality control system. Acceptance testing for self-lubricated components requires precise measurements within a temperature range of 40 to 60 degrees Fahrenheit and a maximum deviation of 1/32 inch for trunnion hub alignment. Administrative requirements include a CMMC Level 1 (Self) certification and the submission of bids in a specific Adobe Acrobat PDF format. Bidders must provide a bid guarantee and, upon award, a performance bond for 100 percent of the original contract price. While the procurement is full and open, it includes a HUBZone 10% price evaluation. Following Amendment 0002, the bid closing date has been extended to 11:00 A.M. PST on December 3, 2026. Bids must be submitted via email to the Contracting Officer and Contract Specialist, ensuring all documentation is in English and follows the prescribed formatting and labeling guidelines.
Other Heavy and Civil Engineering Construction

POSTED

2 days ago

DEADLINE

in 11 days
View Details
NAICS: 237990
New
Federal
W9127N27BA005 Foster Spillway Gate Nut Replacements and Re-Tensioning
Solicitation # W9127N27BA005
The U.S. Army Corps of Engineers Portland District is soliciting firm-fixed-price bids for the Foster Spillway Gate Nut Replacements and Re-Tensioning project located at Foster Dam in Linn County, Oregon. This project is a Total Small Business Set-Aside under NAICS 237990, with an estimated construction value between $1,000,000 and $5,000,000. The scope of work involves replacing wire rope attachment components, including nuts, washers, u-bolts, and u-bolt spacers, and performing wire rope tensioning for all spillway gates. Successful completion requires the gates to be operated through at least three complete cycles. The contractor must begin performance within 10 calendar days of the Notice to Proceed and complete all work within 400 calendar days. Key requirements include compliance with CMMC Level 1 for any systems processing Federal Contract Information or Controlled Unclassified Information. The contractor must provide a project manager, site superintendent, project engineer, quality control manager, and site safety health officer. Bids must be submitted electronically by December 16, 2026. Site access requires U.S. citizenship and a REAL ID, and all participants must adhere to EM 385-1-1 safety standards. The contract includes strict packaging and marking requirements for all components, and the contractor is responsible for all loss or damage during shipment.
Other Heavy and Civil Engineering Construction

POSTED

6 days ago

DEADLINE

in 24 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Get AI-powered intelligence on the opportunities still open

Every solicitation package arrives shredded into a compliance breakdown and matched to your past performance, with incumbent history and alerts on amendments and award.

Miguel
Hillary
Keith Deutsch
Christine

Join 900+ contractors already using CLEATUS