Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Addressable Fire Alarm System Design and Installation

Active

Federal

Response Deadline08/11/2026, 04:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract entails the full design, supply, and installation of an addressable fire alarm system meeting stringent compliance standards under NFPA 72 and UFC-3-600, encompassing all core components including control panels, detectors, notification appliances, and associated wiring. This is a subcontract opportunity issued under NAICS code 238220, specifically for a Department of Defense project managed by the W6QK Acc-Apg Cont Ct Software Sector, with the work to be performed at Fort Huachuca, Arizona, 85613. The system must be engineered for reliable performance in a military environment, ensuring seamless integration and compliance with federal defense safety regulations. Proposals must be submitted by the deadline of August 11, 2026, at 4:00 PM, with the solicitation posted on August 7, 2026. While the contract type is classified as a subcontract, no set-aside preferences or organizational details are specified, and no point of contact information is provided. The successful bidder will be responsible for delivering a complete, code-compliant solution with full turnkey execution, including all materials, labor, and testing necessary for system activation and certification at the designated location.

General Info

Design, supply, and install NFPA 72 compliant fire alarm system at Fort Huachuca, Arizona, for DoD by August 11, 2026.

Agency

Department Of Defense → W6QK Acc-Apg Cont Ct Software SectorView Agency

NAICS

238220 - Plumbing, Heating, and Air-Conditioning ContractorsView NAICS

Place of Performance

Fort Huachuca, AZ, 85613, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 7

subcontract

Response DeadlineAug 11

Submission deadline

Response Deadline

08/11/2026, 04:00:00 PM UTCin 3 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → W6QK Acc-Apg Cont Ct Software Sector

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → W6QK Acc-Apg Cont Ct Software Sector

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Full design, supply, and installation of an addressable fire alarm system including panels, detectors, notification appliances, and wiring compliant with NFPA 72 and UFC-3-600.

Similar Contracts

Same NAICS industry code

ESJC – FIRE EXTINGUISHER SERVICES

Solicitation # esjc-fire-extinguisher-services

This subcontracting opportunity, issued by Education & Training Resources for the Excelsior Springs Job Corps Center in Missouri, seeks qualified vendors to provide quarterly fire extinguisher inspection and refilling services across 21 campus buildings and 23 center-owned vehicles, totaling 175 extinguishers. Bidders must submit a completed Fee-For-Service Bid Sheet with a detailed cost breakdown, along with all required documentation including Missouri-specific licensing, Form W-9, Vendor Acknowledgement Form, FFATA Notice, Anti-Lobbying Certification, and Certificates of Insurance. The contract requires compliance with federal regulations including the Service Contract Act, Minimum Wages under Executive Order 14026, and certification against debarment, while also mandating active Sam.gov registration and a Unique Entity ID. All work must adhere to the current National Electrical Code and NFPA Standard No. 101, Life Safety Code, as well as applicable OSHA and local construction regulations. Services are scheduled for four annual visits beginning October 1, 2026, through September 31, 2027, with inspection tags required for each extinguisher and no additional charges for packing or delivery unless pre-approved. Bids must be submitted by 12pm CST on August 14, 2026, to the specified address, clearly marked, with no erasures permitted and all corrections properly initialed. The award will be based on the best overall value, not necessarily the lowest bid, and the procurement is set aside for small business, small disadvantaged business, women-owned, HUBZone, veteran-owned, and service-disabled veteran-owned small businesses. Contractors and personnel must comply with strict site security policies, including a prohibition on alcohol, tobacco, drugs, firearms, and fraternization with students or staff. Payment will be processed within 30 days of invoice submission upon final acceptance by the center, which includes submission of warranties and a signed punch list.

ETR/Excelsior Springs Job Corps

POSTED

about 12 hours ago

DEADLINE

Boiler replacement in IOOF and Administration

Solicitation # boiler-replacement-ioof-administration

Serrato Corporation DBA Flint Hills Job Corps is seeking a licensed HVAC contractor to replace three boilers across two buildings at the Flint Hills Job Corps Center in Manhattan, Kansas—Building 1 (IOOF) and Building 2 (Administrative/Academic). In Building 1, two existing Peerless gas-fired boilers will be removed and replaced with new hot water gas-fired boilers rated at 1,680,000 B.T.U. input and 1,344,000 B.T.U. output per hour. In Building 2, a single high-efficiency gas-fired boiler with 600,000 B.T.U. input, 572,000 B.T.U. output, and 94% efficiency certified by Energy Star will be installed. The work includes commissioning of the boiler control systems by a qualified agent, and full documentation must be submitted at substantial completion, including inspection reports, test results, warranties, commissioning reports, and O&M manuals. The contractor must adhere to all applicable Kansas state codes including NEC, NFPA-72, NFPA 101, IBC, IMC, IPC, and IECC, and comply with EPA regulations such as 40 CFR 761 and 40 CFR 61 Subpart M, as well as OSHA 29 CFR 1926 standards. All materials must be properly stored and secured by the contractor, and pipework must be labeled with preformed PVC tags indicating service and flow direction. The contract is a small business set-aside under SBA programs, open to Small Businesses, Small Disadvantaged Businesses, Women-Owned Small Businesses, HUBZone Businesses, Veteran-Owned Small Businesses, and Service-Disabled Veteran-Owned Small Businesses. Proposals must include a current W-9 and DUNS number, and the contractor must hold a valid, active license to perform work in Manhattan, Kansas. A Certificate of Liability Insurance is required with the Center listed as both Certificate Holder and Additional Insured. The Wage Determination under the Davis-Bacon Act applies, mandating prevailing wage rates for labor. Work must commence within fourteen days of the Notice To Proceed, with an overall 90-day performance period—60 days allotted for substantial completion and 30 days for closeout, though all work, including punch list items, must be completed within 120 calendar days of NTP. Substantial completion requires a seven-day advance

Serrato Corporation DBA Flint Hills Job Corps

POSTED

about 12 hours ago

DEADLINE

Keystone Lincoln Dorm Water Heater Repair

Solicitation # keystone-lincoln-dorm-water-heater-repair

The contract is for the repair of a AquaPlex Turbopower 96 hot water heater, Model # 100L400A-TPX with Serial Number F008076, located at the Keystone Job Corps Center – Lincoln Dormitory in Drums, Pennsylvania. The work includes replacement of critical components such as the blower motor assembly, gas valve, hot surface ignitor, ignitor gasket, and electrode flame rod. The solicitation is exclusively set aside for small business concerns including Small Business, Small Disadvantaged Business, Women-Owned Small Business, HUBZone Small Business, Veteran-Owned Small Business, and Service-Disabled Veteran-Owned Small Business as defined by the SBA. All bidders must be actively registered and in good standing on Sam.gov, and the contract is subject to Davis-Bacon wage requirements, mandating certified payroll submissions for all laborers and mechanics employed on the project. Bidders are required to separately itemize labor and material costs in their proposals, though no pricing schedule or estimated contract value is provided. The place of performance is clearly identified as Drums, Pennsylvania, and while the period of performance, delivery schedule, and FOB terms are unspecified, the response deadline is set for August 14, 2026. The procurement is administered by Adams & Associates Keystone Red Rock Job Corps, with Jennie Drumheller as the primary point of contact. No formal evaluation factors, award methodology, packaging requirements, or inspection criteria are detailed in the solicitation documents.

Adams & Associates Keystone Red Rock Job Corps

POSTED

about 12 hours ago

DEADLINE

2026-Maui-Dorm Exhaust Fans

Solicitation # 2026- Maui- Dorm Exhaust Fans

This is a subcontracting opportunity with Management & Training Corporation (MTC) for the removal and replacement of approximately 25 exhaust fans across three dormitories at the Hawaii Job Corps Center – Maui, located at 500 Ike Drive, Makawao, HI 96768. The solicitation, issued under the title “2026-Maui-Dorm Exhaust Fans,” has a response deadline of August 28, 2026, at 3:00 PM HST, and is exclusively for submission via email to Karllene Allen and Mila Handel at jobcorps.org addresses. The contract is a fixed-price, single lump sum agreement with a required bid breakout detailing materials, labor with categories and rates, equipment, associated fees, bonds, subcontractor costs, overhead, profit, and other direct or indirect costs, all to be presented on contractor letterhead. Bidders must complete and submit the MTC Supplier Packet, including a W-9 form, Supplier Self-Certification, and Terms & Conditions acceptance, and provide three references for comparable projects. A mandatory physical site visit with signature on an attendance roster is required prior to bid submission. The solicitation is set aside for small business categories including Small Business, Small Disadvantaged Business, Women-Owned Small Business, HUBZone, Veteran-Owned, and Service-Disabled Veteran-Owned Small Business under NAICS code 238220. Contractors must comply with federal wage requirements under Executive Order 13658, submit weekly certified payroll reports, display required posters, and adhere to DOL training obligations. Performance and payment bonds are required if the bid is $25,000 or more, at 100% of the contract value, issued by an A-rated surety and in acceptable forms such as AIA A-311, AIA A-312, SF-25, or SF-25A. A bid bond of 20% of the base bid is also required for bids of $25,000 or more. Insurance requirements include general liability ($1M per occurrence, $3M aggregate), auto liability ($1M), workers’ compensation ($500,000), and professional liability ($1M per occurrence, $3M aggregate) with MTC listed as additional insured. All work must include removal and disposal of existing fans per local regulations, installation of new approved units with testing, drywall

Management & Training Corporation

POSTED

about 12 hours ago

DEADLINE

NJCC Building 32 Boiler Replacement in Vermont

Solicitation # njcc-building-32-boiler-replacement-vermont

This solicitation seeks bids for the replacement of an oil-fired boiler with a high-efficiency propane steam boiler at Building 32 of the Northlands Job Corps Center in Vergennes, Vermont. The scope requires full demolition and proper disposal of the existing system, installation of a new propane boiler and gas burner compliant with FEMP JCH-814 standards, replacement of critical components including a duplex boiler feed tank and control panel, condensate tanks, steam traps, Y strainers, check valves, and condensate receivers, as well as installation of new feed water piping with a reduced pressure backflow preventer, insulation, stack modifications, and full system testing and commissioning. All work must adhere to the International Mechanical Code, International Energy Conservation Code, International Plumbing Code, International Fuel Gas Code, National Electrical Code, NFPA Life Safety 101, and NFPA 58. The contractor must provide a propane gas tank and all associated materials, ensuring compliance with applicable federal, state, and local regulations. The solicitation is designated as a small business set-aside under SBA guidelines, open to Small Business, Small Disadvantaged Business, Women-Owned Small Business, HUBZone Small Business, Veteran-Owned Small Business, and Service-Disabled Veteran-Owned Small Business concerns. Bidders must hold an active SAM.gov registration and Unique Entity ID, submit a completed Bid Sheet with detailed, line-item cost breakdowns for equipment, materials, and labor, and provide all required Vermont-specific licenses and credentials. Mandatory attachments include a Vendor Acknowledgement Form, Form W-9, applicable Certificates of Insurance listing Center/ETR as certificate holder, a proposed schedule of work days and hours, and proof of bonding and insurance as required by project value thresholds—specifically, a 100% payment bond for projects over $35,000 and both performance and payment bonds for those exceeding $150,000. The contract incorporates numerous FAR clauses addressing ethical conduct, labor standards including Davis-Bacon and Executive Order 14026 minimum wages, environmental compliance, safety, and anti-kickback provisions. Proposals must be submitted by 12:00 p.m. on August 20, 2026, to the designated delivery address in Vergennes, Vermont, and must be signed and initialed with no erasures. Final acceptance requires a signed punch list and submission of all warranties and project documentation. Bid evaluation is at the sole discretion of

Northlands Job Corps Center /ETR

POSTED

about 12 hours ago

DEADLINE

RFQ#3857 Freezer Door Replacement

Solicitation # RFQ#3857

This subcontracting opportunity with Management & Training Corporation (MTC) for the Charleston Job Corps Center in Charleston, West Virginia, seeks a qualified contractor to perform the removal and replacement of three walk-in refrigeration doors—one cooler door and two freezer doors—along with all associated hardware, gaskets, closers, thresholds, and related components. The work must be completed in accordance with OSHA safety standards and applicable refrigeration and building codes, with all debris properly removed and disposed of. Contractors are required to furnish a lump sum fee covering all labor, materials, equipment, transportation, supervision, and incidental costs. The project must be performed at the designated site, with installation dates coordinated to minimize operational disruption, and final acceptance is contingent upon successful inspection and approval by Charleston Job Corps personnel, ensuring all doors operate correctly, seal airtight, and function without binding or defects, with the work area cleaned upon completion. The solicitation, identified as RFQ#3857 Freezer Door Replacement, is open only to small business concerns meeting specific socioeconomic designations, including Small Business, Small Disadvantaged Business, Women-Owned Small Business, HUBZone Small Business, Veteran-Owned Small Business, and Service-Disabled Veteran-Owned Small Business, with the applicable NAICS code 238220 and size standard of $19 million in annual receipts. Offerors must self-certify their status, provide a completed W-9, Tax ID, DUNS number, and Unique Entity Identifier, and comply with FAR clauses including 52.219-8 (small business representation), 52.209-6 (debarment disclosure for first-tier subcontractors exceeding $30,000), and 52.222-41, requiring adherence to Wage Determination WD#2015-4347 (Rev 29). Contractors must also comply with extensive DOL requirements covering PII encryption, breach reporting within one hour, mandatory training, and records management, while submitting proof of insurance with $1 million general liability per occurrence, $3 million aggregate, $1 million auto, and $500,000 workers’ compensation, naming MTC and DOL as additional insured and certificate holder. Proposals must be submitted via email by 3:00 PM EST on August 17, 2026, and include a completed bid sheet, three relevant references, and the supplier packet, with award based on best value as

Management & Training Corporation

POSTED

about 12 hours ago

DEADLINE

Plumbing and Gas Line Repair

Solicitation # plumbing-gas-line-repair

The contract involves the correction of plumbing and gas system deficiencies at the Earle C. Clements Job Corps Center in Morganfield, Kentucky, to ensure full compliance with the International Plumbing Code and applicable safety standards. The work requires the contractor to provide all labor, materials, equipment, supervision, and incidentals necessary to complete repairs and upgrades across multiple buildings, including isolating and pressure testing gas lines at Building 305, installing backflow preventers at Buildings 607 and 701, and relocating water piping away from electrical panels at Building 610. The contractor must supply all piping, fittings, supports, and accessories, perform rigorous pressure and leak testing, and restore affected areas with proper sealing and patching. The contract is a fixed-price, single lump sum arrangement with an estimated value not exceeding $25,000, and the work must be completed within 60 consecutive business days after receiving a written Notice to Proceed, with work commencing no later than five business days after the agreed start date. An onsite pre-construction meeting is required to coordinate scheduling. All bidders must be registered with a Unique Entity Identifier and provide a nine-digit Tax ID and DUNS number, and the solicitation is exclusively set aside for small businesses, including Small Disadvantaged, Women-Owned, Veteran-Owned, HUBZone, and Service-Disabled Veteran-Owned Small Businesses. The contractor must submit a detailed bid breakout on company letterhead, including fully itemized costs for labor, materials, equipment, permits, subcontractors, overhead, and profit, supported by manufacturer data, cut sheets, and warranty details. Required documentation includes the MTC Supplier Self-Certification Form, Form W-9, signed bid form, three comparable project references, SF 1413 for wage compliance, and adherence to prevailing federal contractor wage rates under Executive Order 13658. Weekly certified payroll reports are mandatory, and safety data sheets must be provided for any hazardous materials used. Insurance requirements include $1 million general liability per occurrence, $1 million auto coverage, and $500,000 workers’ compensation. The contractor must also provide two complete operation and maintenance manuals with manufacturer documentation, certificates of warranty, and at least two hours of on-site training for facility personnel. Bidding closes at 3:00 p.m. CST on August 10, 2026, with submissions emailed to Miranda Wolfe at the designated address, and awards will be made based on

Earle C. Clements Job Corps Center

POSTED

about 12 hours ago

DEADLINE

Plumbing and Waterline InstallationThe contract titled Plumbing and Waterline Installation requires the installation of new waterlines and plumbing systems to support the operation of a hydro actuated diverter and the overall wash rack functionality. This subcontract is issued by the Texas Military Department under the North American Industry Classification System code 238220, which corresponds to plumbing, heating, and air-conditioning contractors. The work is intended to ensure proper water flow and system integrity for the wash rack, enabling efficient and reliable operation of the hydro actuated diverter mechanism. All work must be completed by the response deadline of August 24, 2026, and the performance location is within the state of Texas, though specific city or address details are not provided. The solicitation is open for bids through the Texas SmartBuy portal, and the contractor must be prepared to meet all technical and operational requirements tied to the water and plumbing infrastructure upgrades.

Texas Military Department

POSTED

about 16 hours ago

DEADLINE

Hydro Actuated Diverter ReplacementThe contract seeks the replacement and installation of a new hydro actuated diverter along with all associated components and waterlines to fully restore the hydro functionality of the wash rack. This work is essential to ensure the system operates as intended, maintaining operational readiness and efficiency for the facility. The scope encompasses complete removal of the existing diverter system and the secure, compliant installation of the new unit, including all necessary plumbing, connections, and ancillary elements required for proper hydraulic performance. The contract is classified as a subcontract under NAICS code 238220, indicating it relates to plumbing, heating, and air-conditioning contractors. It is issued by the Texas Military Department under the Texas state agency, with a posted date of August 8, 2026, and a response deadline of August 24, 2026, at 8:00 PM. The place of performance and specific location details are not provided, but the work is intended for a wash rack within a Texas Military Department facility. The solicitation is accessible via the Texas SmartBuy portal for interested vendors to review requirements and submit proposals.

Texas Military Department

POSTED

about 16 hours ago

DEADLINE

HVAC Equipment and Ductwork InstallationThe contract titled HVAC Equipment and Ductwork Installation is a subcontract issued by the California Department of State Hospitals for the comprehensive installation of heating, ventilation, and air conditioning systems, encompassing all necessary components such as units, ducts, piping, and controls. The work is scoped to support facility operations under the North American Industry Classification System code 238220, which corresponds to HVAC installation services. The solicitation was posted on August 7, 2026, with a response deadline set for September 16, 2026, indicating a structured procurement timeline for qualified contractors to submit proposals. The place of performance and organizational details are not specified in the provided data, but the contracting entity is rooted in California, suggesting the work will occur at one or more state hospital facilities within the state. As a subcontract, the award is likely tied to a larger project managed by a prime contractor, with the primary objective being the integration of compliant, efficient HVAC systems throughout designated buildings. The absence of set-aside details implies the opportunity is open to all eligible bidders without demographic or size-based restrictions, and interested parties must submit proposals through the California eProcurement portal by the stated deadline to be considered.

California Department of State Hospitals

POSTED

about 17 hours ago

DEADLINE

in about 1 month

Plumbing and Piping Systems InstallationThe contract pertains to the installation of potable water, sanitary sewer, storm drainage, medical gas, and HVAC piping systems under a subcontract arrangement for a project managed by the California Department of State Hospitals. The work is classified under NAICS code 238220, which specifically covers plumbing, heating, and air-conditioning contractors, indicating the scope is focused on mechanical and utility infrastructure within a healthcare facility. The solicitation was posted on August 7, 2026, with responses required by September 16, 2026, providing a six-week window for qualified subcontractors to submit proposals. The place of performance and agency location details are unspecified, but the involvement of medical gas systems suggests the work will occur within a state-operated healthcare campus requiring strict compliance with health and safety codes. No set-aside provisions or organizational type preferences are indicated, implying the opportunity is open to any eligible subcontractor capable of meeting technical and regulatory requirements.

California Department of State Hospitals

POSTED

about 17 hours ago

DEADLINE

in about 1 month

MEP Rough-In for Future KitchenThe contract is for the installation of structural supports and rough-in mechanical, electrical, and plumbing systems for a future lunch preparation kitchen, with a shell-only scope that excludes all finishes, fixtures, and equipment. This subcontract falls under NAICS code 238220, indicating it is classified as electrical and other wiring installation contractors, and is targeted for bid by qualified subcontractors ready to execute foundational systems without interior finishes or operational machinery. The work must be performed in accordance with the project’s design intent, ensuring all rough-ins are properly coordinated and positioned to accommodate future kitchen expansion, but without any final installation of appliances, cabinetry, or surface treatments. The solicitation was posted on August 7, 2026, with a response deadline of August 28, 2026, managed by the Utah agency through the BonfireHub platform. While no specific location details are provided, performance is expected within Utah, and the contract is open to eligible subcontractors without any identified set-aside designation. All interested parties must submit proposals prior to the deadline to be considered for award, with responsibilities centered solely on the structural and utility rough-in aspects of the kitchen space.

POSTED

about 17 hours ago

DEADLINE

More opportunities from Department Of Defense → W6QK Acc-Apg Cont Ct Software Sector

Same awarding agency

Fire Detection System Testing and CommissioningThe contract involves comprehensive testing, inspection, and commissioning of fire alarm and VESDA systems to ensure full compliance with NFPA 72, UFC-3-600, and operational readiness standards. The work requires detailed evaluation of system performance, calibration of detection devices, verification of control panel functions, and coordination with building systems to guarantee reliable operation under all conditions. All activities must be documented and certified to meet federal fire safety requirements and support mission-critical infrastructure integrity. This subcontract is issued under NAICS code 541350 and is associated with the Department of Defense through the W6QK Acc-Apg Cont Ct Software Sector. Performance is located at Fort Huachuca, Arizona, with a zip code of 85613. The solicitation was posted on August 7, 2026, and responses are due by August 11, 2026, at 4:00 PM. The contract emphasizes adherence to strict technical protocols and timely deliverables to ensure systems are fully functional and compliant prior to operational activation.

Building Inspection Services

POSTED

DEADLINE

Remote Annunciator and Control IntegrationThe contract calls for the installation and integration of remote annunciators and control interfaces to connect fire detection systems with chamber control systems, enabling centralized monitoring across facilities at Fort Huachuca, Arizona. This effort is critical to ensuring real-time visibility and coordinated response capabilities between fire safety infrastructure and environmental control systems within sensitive operational chambers. The work requires precise technical coordination to interface legacy and modern systems, ensuring full compatibility, reliability, and compliance with mission-critical safety standards. The opportunity is structured as a subcontract under the NAICS code 541330, indicating it falls within engineering services, and is administered by the Department of Defense through the W6QK Acc-Apg Cont Ct Software Sector. The solicitation was posted on August 7, 2026, with proposals due by August 11, 2026, and performance is expected to be completed at the designated location in Fort Huachuca. While no set-aside provisions or point of contact information are provided, interested parties must adhere strictly to the submission deadline and technical requirements to qualify for award.

Engineering Services

POSTED

DEADLINE

Electrical Conduit and Wiring Installation (EMT)The contract mandates the installation of electrical metallic tubing conduit and fire-rated wiring dedicated to fire alarm and VESDA detection systems across the facility at Fort Huachuca, Arizona, with strict adherence to NEC Article 760 standards for fire alarm circuits. All work must ensure compliance with fire safety codes, including proper routing, support, and termination of wiring to maintain system integrity under fire conditions. The scope encompasses the full installation process from conduit fabrication and secure mounting to the placement and termination of rated cables, ensuring seamless integration with existing fire protection infrastructure. This subcontract, classified under NAICS code 238210 for electrical contracting, is issued by the Department of Defense through the W6QK Acc-Apg Cont Ct Software Sector and requires submission of proposals by August 11, 2026. Performance is exclusively tied to the location at Fort Huachuca with zip code 85613, and all contractors must be prepared to meet rigorous federal construction and safety requirements. The work is critical to maintaining life safety systems within a military installation, necessitating precision, documented compliance, and qualified personnel familiar with military facility protocols and fire protection system integration.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

VESDA System IntegrationThe contract involves the supply, installation, and commissioning of VESDA high-sensitivity smoke detection units across Chambers 1 through 4, with integrated cross-zone detection capabilities designed for secure environments requiring early fire detection. The system must meet stringent performance standards typical of military and defense-sensitive areas, ensuring rapid smoke identification and alarm activation even in low-smoke conditions. Installation must be completed in accordance with technical specifications for secure facility compliance, including configuration for seamless integration with existing security and monitoring infrastructure. The contract is classified as a subcontract under NAICS code 334511, related to instrumentation and laboratory equipment manufacturing, and is issued by the Department of Defense through the W6QK Acc-Apg Cont Ct Software Sector. Performance is required at Fort Huachuca, Arizona, with a bid response deadline of August 11, 2026. The solicitation was posted on August 7, 2026, and the work will be executed under a government contract framework with no specified set-aside type. All equipment must be fully operational and commissioned upon delivery, with documentation and training provided to ensure long-term system reliability and maintenance.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

DEADLINE

Notice of Intent to Award Sole Source - Chamber Services, Inc.-

Solicitation # PANAPG26P0000052283

The U.S. Department of Defense, through the W6QK Acc-Apg Cont Ct Software Sector office located at Fort Huachuca, Arizona, has issued a Notice of Intent to Award a sole source contract to Chamber Services, Inc. for services under the NAICS code 339999, which covers other miscellaneous manufacturing. There is no set-aside designated for this procurement, meaning it is open without restrictions for small businesses or other socio-economic categories. The solicitation number is PANAPG26P0000052283, and the notice was posted on August 7, 2026, with a response deadline of August 11, 2026, at 4:00 p.m. Eastern Time. The place of performance is also Fort Huachuca, Arizona. Primary point of contact is Neil Mendiola, reachable at neil.s.mendiola.civ@army.mil, with secondary contact Rosa L Rascon at rosa.l.rascon.civ@army.mil. Additional details regarding the scope, requirements, and rationale for sole source selection are contained in the attached Notice of Intent to Award document, accessible via the provided SAM.gov link.

All Other Miscellaneous Manufacturing

POSTED

DEADLINE

ARMY OPEN SOLICITATION (AOS)

Solicitation # W9128Z-25-S-A002

The Army Open Solicitation (AOS), identified by solicitation number W9128Z-25-S-A002, is an indefinite, open solicitation issued by the U.S. Army Contracting Command – Aberdeen Proving Ground to rapidly acquire innovative commercial technologies and research-driven solutions across all Army mission areas. Designed to revitalizing the industrial base and enhancing Warfighter lethality, the solicitation leverages a flexible acquisition framework under multiple FAR, DFARS, and U.S. Code authorities, including Other Transactions, Commercial Solutions Opening, and prototype authorities. It supports both Active Capability Gap submissions and periodic Calls for Solutions, with responses evaluated based on technical merit, feasibility, schedule, price estimation, viability, and desirability using a trade-off approach rather than lowest price technically acceptable. The solicitation remains open indefinitely until canceled, with recent amendments through March 2026 expanding and clarifying Army Example Areas, refining submission procedures, and updating contracting information including Active Capability Gap mailboxes. All submissions must adhere to strict formatting requirements, including a single PDF submission not exceeding five pages or fifteen slides, with mandatory inclusion of an executive summary, company information, and rough order of magnitude cost and schedule estimates. Offerors must be registered in SAM, use WAWF for invoicing, and comply with stringent data storage and security requirements, including U.S.-only data hosting and full organizational conflict of interest disclosures. The solicitation encourages participation from small businesses, nontraditional defense contractors, and nonprofit research institutions, with specific certifications required through the Affirmation of Business Status Certification. Performance may occur at government facilities including Aberdeen Proving Ground and other CONUS/OCONUS locations as directed, with award timing anticipated in fiscal year 2026, and support expected through 2032. No fixed contract value is provided, as pricing is determined through competitive evaluation of commercial proposals under the solicitation's open-ended structure.

Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

DEADLINE

Repair Buffalo Soldier Gate Fence

Solicitation # W91RUS26RA010

The contract titled Repair Buffalo Soldier Gate Fence is a small business set-aside solicitation issued by the Department of Defense under the Office of W6QK Acc-Apg Cont Ct Software Sector, located at Fort Huachuca, Arizona. The solicitation number is W91RUS26RA010 and was posted on July 22, 2026, with a response deadline of August 24, 2026, at 7:00 PM Eastern Time. It is classified under NAICS code 237990, indicating it pertains to other heavy and civil engineering construction, and is wholly reserved for small businesses as per the SBA’s Total Small Business Set-Aside guidelines. Work is to be performed at Fort Huachuca, Arizona, with no specific city or state provided beyond the ZIP code 85613. The primary point of contact for inquiries is Nadia Firestone, reachable by phone at 520-692-1411 or via email at nadia.i.firestone.civ@army.mil. Interested parties must submit proposals through the SAM.gov platform using the provided URL before the deadline to be considered.

Other Heavy and Civil Engineering Construction

POSTED

DEADLINE

Repair Van Deman Gate Fence

Solicitation # W91RUS26RA011

The contract titled Repair Van Deman Gate Fence is a small business set-aside solicitation issued by the Department of Defense under the W6QK Acc-Apg Cont Ct Software Sector, with solicitation number W91RUS26RA011 and NAICS code 237990. It is exclusively reserved for small businesses as defined under the SBA Total Small Business Set-Aside provision, ensuring opportunities for qualified small business contractors. The solicitation was posted on July 22, 2026, with a response deadline of August 24, 2026, at 7:00 PM Eastern Time. Work will be performed at Fort Huachuca, Arizona, 85613, and all performance obligations must be satisfied at this location. The primary point of contact for inquiries is Nadia Firestone, reachable via phone at 520-692-1411 or email at nadia.i.firestone.civ@army.mil. This contract falls under the Office category and is part of the broader Department of Defense infrastructure maintenance efforts focused on securing and restoring critical perimeter fencing assets at the Fort Huachuca installation.

Other Heavy and Civil Engineering Construction

POSTED

DEADLINE

Capstone Project Design and Evaluation for DE Certification ProgramThe contract entails the design and evaluation of a capstone project for the DE Certification Program, specifically tailored to allow trainees to apply digital engineering and model-based systems engineering principles to authentic U.S. Army acquisition scenarios. The project must incorporate structured rubrics for assessment, targeted mentoring support, and a clear methodology for evaluating trainee performance against defined competency benchmarks. Its purpose is to bridge theoretical knowledge with practical application in a military acquisition context, ensuring participants develop the skills necessary to contribute effectively to modern defense systems development. This effort is classified as a subcontract under NAICS code 611430, indicating an educational services focus, and is issued by the Department of Defense through the W6QK Acc-Apg Cont Ct Software Sector. The solicitation was posted on August 5, 2026, with a response deadline of August 11, 2026, at 4:00 PM. While details such as the place of performance and point of contact are not specified, the project is expected to operate within the broader framework of Army modernization initiatives and must align with existing DE and MBSE standards used across defense acquisition programs. The successful bidder will be responsible for creating a scalable, measurable, and pedagogically sound capstone experience that delivers tangible outcomes for certification readiness.

Professional and Management Development Training

POSTED

DEADLINE

Data Governance and Digital Thread Implementation TrainingThe contract seeks to deliver specialized training on managing engineering data through digital thread methodologies, focusing on establishing end-to-end traceability and seamless interoperability across disparate systems and platforms. Participants will learn how to implement governance structures that ensure data integrity, consistency, and accessibility throughout the product lifecycle, enabling efficient collaboration and decision-making in complex engineering environments. The training is designed to equip technical teams with practical skills to align data processes with industry best practices and support modernized defense acquisition and systems engineering workflows. Issued under the NAICS code 541690 for other professional, scientific, and technical services, this subcontract falls under the Department of Defense’s W6QK Acc-Apg Cont Ct Software Sector and is open for responses until August 11, 2026. The work is not subject to a specific set-aside classification, and performance location details are not specified, indicating flexibility in delivery format or site. While no point of contact is listed, the opportunity is accessible via the SAM.gov portal, and proposers are expected to demonstrate expertise in digital thread frameworks, data governance, and cross-platform integration within defense or aerospace engineering contexts.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

Cybersecurity Integration via NIST RMF in Digital Engineering TrainingThe contract seeks to deliver specialized training on integrating the NIST Risk Management Framework into Digital Engineering workflows to enhance secure development practices, ensure proper data handling, and maintain model integrity throughout the system lifecycle. This effort is targeted at organizations and personnel involved in cyber-secure engineering environments, with a focus on embedding NIST RMF controls directly into digital engineering processes to reduce vulnerabilities and promote compliance with federal cybersecurity standards. The training must be practical, hands-on, and aligned with current DoD cyber resilience objectives. Issued as a subcontract under the Department of Defense’s W6QK Acc-Apg Cont Ct Software Sector, the opportunity is classified under NAICS code 541690 for Other Scientific and Technical Consulting Services. The solicitation was posted on August 5, 2026, with a response deadline of August 11, 2026, at 4:00 PM. There is no specified set-aside status or place of performance location, and the contract does not include a designated point of contact. Interested parties must submit proposals through the provided SAM.gov link before the deadline to be considered for award.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

AI and LLMs Integration in Systems Engineering TrainingThe contract seeks the development and delivery of specialized training modules focused on integrating artificial intelligence and large language models into systems engineering workflows, with emphasis on practical applications in requirements generation, risk analysis, and documentation automation. The training is designed to equip systems engineering professionals with the skills to leverage AI tools effectively, improving efficiency and accuracy in critical project phases. The work is structured as a subcontract under the Department of Defense, specifically managed by the W6QK Acc-Apg Cont Ct Software Sector, and classified under NAICS code 541715 for research and development in the physical, engineering, and life sciences. The solicitation was posted on August 5, 2026, with a deadline for responses set for August 11, 2026, at 4:00 PM. Performance location and specific agency office details are not provided, and no set-aside provisions or point of contact information are included in the posting.

Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

DEADLINE