Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Electrical Conduit and Wiring Installation (EMT)

Active

Federal

Response Deadline08/11/2026, 04:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract mandates the installation of electrical metallic tubing conduit and fire-rated wiring dedicated to fire alarm and VESDA detection systems across the facility at Fort Huachuca, Arizona, with strict adherence to NEC Article 760 standards for fire alarm circuits. All work must ensure compliance with fire safety codes, including proper routing, support, and termination of wiring to maintain system integrity under fire conditions. The scope encompasses the full installation process from conduit fabrication and secure mounting to the placement and termination of rated cables, ensuring seamless integration with existing fire protection infrastructure. This subcontract, classified under NAICS code 238210 for electrical contracting, is issued by the Department of Defense through the W6QK Acc-Apg Cont Ct Software Sector and requires submission of proposals by August 11, 2026. Performance is exclusively tied to the location at Fort Huachuca with zip code 85613, and all contractors must be prepared to meet rigorous federal construction and safety requirements. The work is critical to maintaining life safety systems within a military installation, necessitating precision, documented compliance, and qualified personnel familiar with military facility protocols and fire protection system integration.

General Info

Install fire alarm and VESDA wiring with metallic conduit at Fort Huachuca per NEC 760, meet DoD safety standards.

Agency

Department Of Defense → W6QK Acc-Apg Cont Ct Software SectorView Agency

NAICS

238210 - Electrical Contractors and Other Wiring Installation ContractorsView NAICS

Place of Performance

Fort Huachuca, AZ, 85613, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 7

subcontract

Response DeadlineAug 11

Submission deadline

Response Deadline

08/11/2026, 04:00:00 PM UTCin 3 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → W6QK Acc-Apg Cont Ct Software Sector

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → W6QK Acc-Apg Cont Ct Software Sector

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Installation of EMT conduit and fire-rated wiring for fire alarm and VESDA systems throughout the facility in compliance with NEC Article 760.

Similar Contracts

Same NAICS industry code

RFO AWP-0772-00, HNL Fiber Optic Transmission System (FOTS) Design Support and Construction in Honolulu, HI

Solicitation # rfo-awp-0772-00-hnl-fiber-optic-transmission-system-fots-design-support-construction-honolulu-hi-0

The contract involves the installation of a new Fiber Optic Transmission System (FOTS) at Daniel K. Inouye International Airport in Honolulu, Hawaii, in two phases, with work including conduit trenching and boring between three buildings to support the deployment of fiber optic cable. The project is valued between one and five million dollars and is classified under NAICS codes 238210, 237130, and 237990, relating to electrical and telecommunications construction. The solicitation is reserved exclusively for small businesses, including Small Disadvantaged Businesses, Women-Owned Small Businesses, HUBZone Small Businesses, Veteran-Owned Small Businesses, and Service-Disabled Veteran-Owned Small Businesses, ensuring participation by eligible disadvantaged and veteran-owned firms. The solicitation was posted on August 8, 2026, with a response deadline of August 15, 2026, and is managed by PTSI Managed Services, Inc. with Anna Ma serving as the primary point of contact for inquiries and subcontractor coordination.

PTSI Managed Services, Inc.

POSTED

about 12 hours ago

DEADLINE

RFO AWP-0772-00, HNL Fiber Optic Transmission System (FOTS) Design Support and Construction in Honolulu, HI

Solicitation # rfo-awp-0772-00-hnl-fiber-optic-transmission-system-fots-design-support-construction-honolulu-hi

The contract solicits the installation of a new Fiber Optic Transmission System (FOTS) at Daniel K. Inouye International Airport in Honolulu, Hawaii, to be completed in two phases with conduit trenching and boring connecting three buildings. The project falls under NAICS codes 238210, 237130, and 237990 and has a construction magnitude between $1 million and $5 million. The solicitation is restricted to small business entities including Small Disadvantaged Businesses, Women-Owned Small Businesses, HUBZone Small Businesses, Veteran-Owned Small Businesses, and Service-Disabled Veteran-Owned Small Businesses, as designated by the SBA. The solicitation number is RFO AWP-0772-00-HNL-Fiber-Optic-Transmission-System-FOTS-Design-Support-Construction-Honolulu-HI, posted on August 8, 2026, with a response deadline of August 15, 2026. All inquiries and submissions should be directed to Anna Ma, Subcontract Administrator at Parsons, via email at anna.t-ctr.ma@faa.gov or phone at 360-204-4418.

PTSI Managed Services, Inc.

POSTED

about 12 hours ago

DEADLINE

Replacement Fiber Line

Solicitation # Replacement Fiber Line

The contract pertains to the replacement of existing multimode fiber optic cabling with a new 12-strand single-mode fiber optic cable system connecting Building 2436 to Building 2443 at the Earle C. Clements Job Corps Center in Morganfield, Kentucky. The work involves removing retired multimode aerial fiber lines and splice boxes from utility poles and the building’s MDF to IDF infrastructure, and installing the new fiber using center-owned utility poles. All labor, equipment, tools, and materials must be furnished by the contractor, including specific approved components such as Belden FS3L0024NS 12-strand OS2 OSP fiber, Belden ECX-01U 1U rack-mounted enclosures, Belden FFSX12LD 12-port adapter panels, and Belden FTSLC900FS01 LC OS2 connectors, or approved equivalents. SFPs are to be provided by Job Corps. The contract is structured as a fee-for-service agreement with a lump sum bid format, and the award will be based solely on best value as determined by Management & Training Corporation, the operator of the center. The place of performance is clearly defined at the Job Corps Center campus, with title to all work vesting in MTC at the F.O.B. point. The solicitation is set aside for small business categories including Small Business, Small Disadvantaged Business, Women-Owned Small Business, HUBZone, Veteran-Owned, and Service-Disabled Veteran-Owned Small Business under NAICS code 238210 with a size standard of $19.0 million. Bidders must self-certify their business status and provide a UEI, tax ID, and DUNS number. Required contractual clauses include Service Contract Labor Standards with Wage Determination WD# 2015-4687 (Rev 31), reporting of executive compensation, small business size representation, and protections when subcontracting. First-tier subcontractors exceeding $30,000 must disclose debarment status. Contractors must comply with the Contract Work Hours and Safety Standards Act, maintain a drug-free workplace, adhere to the Anti-Kickback Act, and report any data breaches to the Department of Labor within one hour. Insurance requirements mandate $1 million per occurrence and $3 million aggregate general liability coverage with MTC named as additional insured, $1 million auto liability, and $500,000 workers’ compensation. In

Earle C. Clements Job Corps Center

POSTED

about 12 hours ago

DEADLINE

AEA-0536, VORTAC (ART) Doppler Conversion, Watertown, NY

Solicitation # aea-0536-vortac-art-doppler-conversion-watertown-ny

The FAA is upgrading its existing VHF Omnidirectional Range facility in Watertown, New York, to a modern Doppler VORTAC system with an offset TACAN, requiring the complete demolition of the current infrastructure. The new installation will feature an on-site 37-foot by 37-foot steel building equipped with a 60-foot diameter counterpoise integrated into the roof, along with full foundations, site preparation, and utility connections. Adjacent to the main structure, a standalone 16-foot by 16-foot by 20-foot steel tower will be constructed to support the offset TACAN component, also including dedicated foundations, site work, and utility services. This project represents a significant modernization of navigational aid capabilities in the region, replacing outdated equipment with a more accurate and reliable Doppler-based system. The solicitation for this project is issued under contract number AEA-0536 and is open exclusively to small business concerns as defined by the Small Business Administration, including Small Disadvantaged Businesses, Women-Owned Small Businesses, HUBZone firms, Veteran-Owned Small Businesses, and Service-Disabled Veteran-Owned Small Businesses. The solicitation was posted on August 8, 2026, with responses due by August 28, 2026, and the North American Industry Classification System code is 238210 for site preparation and infrastructure construction. The contracting activity is managed by PTSI Managed Services, Inc., operating as Parsons, with Angela Stydinger from the FAA serving as the primary point of contact for inquiries. The entire project will be performed at the existing facility location in Watertown, New York.

PTSI Managed Services, Inc (Parsons)

POSTED

about 12 hours ago

DEADLINE

Wiring and Electrical System UpgradeThe contract involves the installation of new electrical wiring linked to a wash rack facility, with full integration into a newly installed control panel and diverter system. This work requires precise coordination between electrical systems and mechanical components to ensure seamless operation, safety compliance, and operational efficiency. The project focuses on upgrading existing infrastructure to support modernized washing functions through properly configured wiring and automated controls. This is a subcontract under the Texas Military Department, with a NAICS code of 238210 indicating it falls within electrical contracting services. The solicitation was posted on August 8, 2026, and responses must be submitted by August 24, 2026, at 8:00 PM. The work is to be performed at a location managed by the Texas Military Department, though specific city or state details are not provided. All activities must align with state and federal electrical codes, and contractors must demonstrate expertise in integrating control systems with industrial equipment.

Texas Military Department

POSTED

about 16 hours ago

DEADLINE

Control Panel Replacement and Electrical IntegrationThe contract requires the replacement of the existing control panel with a new UL-listed unit designed for enhanced safety and compliance, ensuring seamless integration with the wash rack system to maintain full operational functionality. This work involves the removal of the current panel, installation of the approved replacement unit, and thorough electrical integration to synchronize with all components of the wash rack, including sensors, pumps, and automation controls, to guarantee reliable and efficient performance under operational conditions. All work must meet industry standards for electrical safety and system interoperability. The contract is issued as a subcontract by the Texas Military Department under NAICS code 238210 for electrical contracting services, with a response deadline of August 24, 2026, and was posted on August 8, 2026. The performance location and specific agency office details are not provided, but the solicitation is accessible via the Texas SmartBuy portal. The subcontractor must ensure complete compliance with UL listing requirements and demonstrate the ability to integrate the new control panel without disrupting existing facility operations.

Texas Military Department

POSTED

about 16 hours ago

DEADLINE

PA System Installation and Integration (Electrical Trade)The contract involves the physical installation and integration of a public address system across multiple school sites within the North East ISD district in Texas, requiring the provision and setup of speakers, amplifiers, control units, and associated cabling. This work must be seamlessly coordinated with existing electrical systems and fire alarm networks to ensure full operational compatibility and compliance with safety standards. The scope is strictly for electrical trade subcontractors, classified under NAICS code 238210, and demands precise on-site execution across a wide geographic footprint of school facilities. The opportunity is open for bids with a response deadline of August 27, 2026, and was posted on August 7, 2026. It is designated as a subcontract and does not specify any set-aside provisions or eligibility restrictions based on business size or category. All work must be performed at the district’s school locations, with no specific city or zip details provided in the posting. Interested parties must engage through the official bidding portal linked in the contract data to access full specifications and submission requirements.

POSTED

about 17 hours ago

DEADLINE

Request for Qualifications for Design Build of District Wide Integrated Public Address/Announcement (PA) Systems in support of the 2025 Bond (A03)

Solicitation # 31-26

North East Independent School District is soliciting qualifications from vendors to design and build a district-wide integrated public address and announcement system in support of its 2025 Bond (A03) initiative through RFQ #31-26. Proposals must demonstrate the bidder’s ability to deliver best value to the district in alignment with the specified requirements, and must be submitted electronically via the Ionwave platform no later than 2:00 p.m. Central Standard Time on Thursday, August 27, 2026. Late, incomplete, or non-electronic submissions will not be accepted, though a single hardcopy sealed envelope containing wet-ink signatures and a USB digital copy may be alternatively delivered to the Procurement office by the deadline. Bidders must register as suppliers to access the portal, and faxed or emailed responses are strictly prohibited. This is not a purchase order but a qualification request, and no guaranteed quantities or dollar values are promised; purchases will occur on an as-needed basis moving forward. The district encourages electronic submission and provides contact support through the procurement office for any assistance with the process.

POSTED

about 17 hours ago

DEADLINE

Relocation and Integration of Laser Firing TankThe contract involves the mechanical and systems engineering required to relocate and integrate a Laser Firing Tank into a newly constructed Tail Building, encompassing comprehensive structural, electrical, and safety system modifications to accommodate the specialized equipment. This subcontract requires expert coordination across multiple disciplines to ensure the tank’s physical relocation is executed without compromising operational integrity, while also aligning all supporting infrastructure with stringent safety and performance standards for high-energy laser operations. The work is being procured by the Texas A&M University System under a subcontract category, with the solicitation posted on August 7, 2026, and responses due by September 1, 2026. The project falls under NAICS code 238210, indicating it is classified as Electrical and Other Wiring Installation Contractors, reflecting the scope’s emphasis on integrated systems installation. Although specific performance location details are not provided, the activity is tied to Texas A&M’s facility development efforts, and all work must meet technical and regulatory requirements for secure, high-hazard environments. The contract’s success hinges on precise engineering execution, regulatory compliance, and seamless integration with existing building systems.

Texas A&M University System

POSTED

about 17 hours ago

DEADLINE

Electrical Installation and Wiring ServicesThe contract titled Electrical Installation and Wiring Services is a subcontract under the NAICS code 238210, focused on the installation of electrical systems including wiring, conduits, lighting, and power distribution as part of a larger building or infrastructure project. It is issued by the California Department of State Hospitals and is open for response until September 16, 2026, with a posting date of August 7, 2026. The work is intended for performance within California, although specific city or zip details are not provided. This subcontract is not set aside for any specific small business category, and no point of contact information is listed. Interested parties must engage through the online portal at the provided UI link to access full solicitation details and submit responses.

California Department of State Hospitals

POSTED

about 17 hours ago

DEADLINE

in about 1 month

Minority Business Enterprise (MBE) Participation and SubcontractingThe contract seeks to engage certified Minority Business Enterprises (MBEs) in electrical, civil, or supply roles to fulfill the University System of Georgia Board of Regents' policy on diversity and inclusion while ensuring eligibility for state tax credits under O.C.G.A. §48-7-38. Participation is mandatory for contractors to meet set goals, and MBEs must be properly certified to qualify for inclusion in the project workforce or supply chain. This subcontract opportunity is tied to a specific project under NAICS code 238210, indicating an emphasis on electrical contracting services, though civil and supply roles are also included to broaden MBE involvement. The solicitation is open for responses until September 11, 2026, and is posted under the Georgia state procurement system with an active digital portal for access and submissions. The engagement is not a direct government procurement but rather a subcontracting requirement imposed by the agency, meaning prime contractors must demonstrate how they will integrate certified MBEs into their project execution plan. Failure to meet MBE participation targets may jeopardize tax credit eligibility and could result in contract noncompliance penalties. There is no specified location for performance, but the oversight and compliance responsibilities fall under the Georgia state agency, requiring all participants to align with state regulations and reporting standards. This contract is designed to drive economic equity by channeling project opportunities to historically underrepresented business owners within Georgia’s construction and supply sectors.

Board Of(university System of Georgia) Regents

POSTED

about 18 hours ago

DEADLINE

in about 1 month

Electrical Distribution System InstallationThe contract mandates the installation of a 25kV primary electrical distribution system encompassing pad-mounted transformers, switchgear, grounding infrastructure, and all necessary terminations, strictly in accordance with the referenced electrical drawings labeled E101 through E301. This work is scoped as a subcontract under the broader electrical infrastructure initiative by the Board of Regents of the University System of Georgia, with performance expected to meet all technical specifications and safety standards implied by the drawings and industry practices for high-voltage distribution systems. The solicitation was posted on August 7, 2026, with a firm deadline for responses set for September 11, 2026, at 7:00 PM. The North American Industry Classification System code 238210 indicates this is for electrical contracting services, aligning with specialized power system installation activities. Although specific location details for performance or contact points are not provided, the contracting entity is clearly the Georgia agency under the University System of Georgia, and the work is likely situated at one or more of its campuses or facilities governed by the Board of Regents. All bids must fully comply with the technical requirements and timeline, with no set-aside provisions indicated for small or disadvantaged businesses.

Board Of(university System of Georgia) Regents

POSTED

about 18 hours ago

DEADLINE

in about 1 month

More opportunities from Department Of Defense → W6QK Acc-Apg Cont Ct Software Sector

Same awarding agency

Fire Detection System Testing and CommissioningThe contract involves comprehensive testing, inspection, and commissioning of fire alarm and VESDA systems to ensure full compliance with NFPA 72, UFC-3-600, and operational readiness standards. The work requires detailed evaluation of system performance, calibration of detection devices, verification of control panel functions, and coordination with building systems to guarantee reliable operation under all conditions. All activities must be documented and certified to meet federal fire safety requirements and support mission-critical infrastructure integrity. This subcontract is issued under NAICS code 541350 and is associated with the Department of Defense through the W6QK Acc-Apg Cont Ct Software Sector. Performance is located at Fort Huachuca, Arizona, with a zip code of 85613. The solicitation was posted on August 7, 2026, and responses are due by August 11, 2026, at 4:00 PM. The contract emphasizes adherence to strict technical protocols and timely deliverables to ensure systems are fully functional and compliant prior to operational activation.

Building Inspection Services

POSTED

DEADLINE

Remote Annunciator and Control IntegrationThe contract calls for the installation and integration of remote annunciators and control interfaces to connect fire detection systems with chamber control systems, enabling centralized monitoring across facilities at Fort Huachuca, Arizona. This effort is critical to ensuring real-time visibility and coordinated response capabilities between fire safety infrastructure and environmental control systems within sensitive operational chambers. The work requires precise technical coordination to interface legacy and modern systems, ensuring full compatibility, reliability, and compliance with mission-critical safety standards. The opportunity is structured as a subcontract under the NAICS code 541330, indicating it falls within engineering services, and is administered by the Department of Defense through the W6QK Acc-Apg Cont Ct Software Sector. The solicitation was posted on August 7, 2026, with proposals due by August 11, 2026, and performance is expected to be completed at the designated location in Fort Huachuca. While no set-aside provisions or point of contact information are provided, interested parties must adhere strictly to the submission deadline and technical requirements to qualify for award.

Engineering Services

POSTED

DEADLINE

VESDA System IntegrationThe contract involves the supply, installation, and commissioning of VESDA high-sensitivity smoke detection units across Chambers 1 through 4, with integrated cross-zone detection capabilities designed for secure environments requiring early fire detection. The system must meet stringent performance standards typical of military and defense-sensitive areas, ensuring rapid smoke identification and alarm activation even in low-smoke conditions. Installation must be completed in accordance with technical specifications for secure facility compliance, including configuration for seamless integration with existing security and monitoring infrastructure. The contract is classified as a subcontract under NAICS code 334511, related to instrumentation and laboratory equipment manufacturing, and is issued by the Department of Defense through the W6QK Acc-Apg Cont Ct Software Sector. Performance is required at Fort Huachuca, Arizona, with a bid response deadline of August 11, 2026. The solicitation was posted on August 7, 2026, and the work will be executed under a government contract framework with no specified set-aside type. All equipment must be fully operational and commissioned upon delivery, with documentation and training provided to ensure long-term system reliability and maintenance.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

DEADLINE

Addressable Fire Alarm System Design and InstallationThe contract entails the full design, supply, and installation of an addressable fire alarm system meeting stringent compliance standards under NFPA 72 and UFC-3-600, encompassing all core components including control panels, detectors, notification appliances, and associated wiring. This is a subcontract opportunity issued under NAICS code 238220, specifically for a Department of Defense project managed by the W6QK Acc-Apg Cont Ct Software Sector, with the work to be performed at Fort Huachuca, Arizona, 85613. The system must be engineered for reliable performance in a military environment, ensuring seamless integration and compliance with federal defense safety regulations. Proposals must be submitted by the deadline of August 11, 2026, at 4:00 PM, with the solicitation posted on August 7, 2026. While the contract type is classified as a subcontract, no set-aside preferences or organizational details are specified, and no point of contact information is provided. The successful bidder will be responsible for delivering a complete, code-compliant solution with full turnkey execution, including all materials, labor, and testing necessary for system activation and certification at the designated location.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

Notice of Intent to Award Sole Source - Chamber Services, Inc.-

Solicitation # PANAPG26P0000052283

The U.S. Department of Defense, through the W6QK Acc-Apg Cont Ct Software Sector office located at Fort Huachuca, Arizona, has issued a Notice of Intent to Award a sole source contract to Chamber Services, Inc. for services under the NAICS code 339999, which covers other miscellaneous manufacturing. There is no set-aside designated for this procurement, meaning it is open without restrictions for small businesses or other socio-economic categories. The solicitation number is PANAPG26P0000052283, and the notice was posted on August 7, 2026, with a response deadline of August 11, 2026, at 4:00 p.m. Eastern Time. The place of performance is also Fort Huachuca, Arizona. Primary point of contact is Neil Mendiola, reachable at neil.s.mendiola.civ@army.mil, with secondary contact Rosa L Rascon at rosa.l.rascon.civ@army.mil. Additional details regarding the scope, requirements, and rationale for sole source selection are contained in the attached Notice of Intent to Award document, accessible via the provided SAM.gov link.

All Other Miscellaneous Manufacturing

POSTED

DEADLINE

ARMY OPEN SOLICITATION (AOS)

Solicitation # W9128Z-25-S-A002

The Army Open Solicitation (AOS), identified by solicitation number W9128Z-25-S-A002, is an indefinite, open solicitation issued by the U.S. Army Contracting Command – Aberdeen Proving Ground to rapidly acquire innovative commercial technologies and research-driven solutions across all Army mission areas. Designed to revitalizing the industrial base and enhancing Warfighter lethality, the solicitation leverages a flexible acquisition framework under multiple FAR, DFARS, and U.S. Code authorities, including Other Transactions, Commercial Solutions Opening, and prototype authorities. It supports both Active Capability Gap submissions and periodic Calls for Solutions, with responses evaluated based on technical merit, feasibility, schedule, price estimation, viability, and desirability using a trade-off approach rather than lowest price technically acceptable. The solicitation remains open indefinitely until canceled, with recent amendments through March 2026 expanding and clarifying Army Example Areas, refining submission procedures, and updating contracting information including Active Capability Gap mailboxes. All submissions must adhere to strict formatting requirements, including a single PDF submission not exceeding five pages or fifteen slides, with mandatory inclusion of an executive summary, company information, and rough order of magnitude cost and schedule estimates. Offerors must be registered in SAM, use WAWF for invoicing, and comply with stringent data storage and security requirements, including U.S.-only data hosting and full organizational conflict of interest disclosures. The solicitation encourages participation from small businesses, nontraditional defense contractors, and nonprofit research institutions, with specific certifications required through the Affirmation of Business Status Certification. Performance may occur at government facilities including Aberdeen Proving Ground and other CONUS/OCONUS locations as directed, with award timing anticipated in fiscal year 2026, and support expected through 2032. No fixed contract value is provided, as pricing is determined through competitive evaluation of commercial proposals under the solicitation's open-ended structure.

Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

DEADLINE

Repair Buffalo Soldier Gate Fence

Solicitation # W91RUS26RA010

The contract titled Repair Buffalo Soldier Gate Fence is a small business set-aside solicitation issued by the Department of Defense under the Office of W6QK Acc-Apg Cont Ct Software Sector, located at Fort Huachuca, Arizona. The solicitation number is W91RUS26RA010 and was posted on July 22, 2026, with a response deadline of August 24, 2026, at 7:00 PM Eastern Time. It is classified under NAICS code 237990, indicating it pertains to other heavy and civil engineering construction, and is wholly reserved for small businesses as per the SBA’s Total Small Business Set-Aside guidelines. Work is to be performed at Fort Huachuca, Arizona, with no specific city or state provided beyond the ZIP code 85613. The primary point of contact for inquiries is Nadia Firestone, reachable by phone at 520-692-1411 or via email at nadia.i.firestone.civ@army.mil. Interested parties must submit proposals through the SAM.gov platform using the provided URL before the deadline to be considered.

Other Heavy and Civil Engineering Construction

POSTED

DEADLINE

Repair Van Deman Gate Fence

Solicitation # W91RUS26RA011

The contract titled Repair Van Deman Gate Fence is a small business set-aside solicitation issued by the Department of Defense under the W6QK Acc-Apg Cont Ct Software Sector, with solicitation number W91RUS26RA011 and NAICS code 237990. It is exclusively reserved for small businesses as defined under the SBA Total Small Business Set-Aside provision, ensuring opportunities for qualified small business contractors. The solicitation was posted on July 22, 2026, with a response deadline of August 24, 2026, at 7:00 PM Eastern Time. Work will be performed at Fort Huachuca, Arizona, 85613, and all performance obligations must be satisfied at this location. The primary point of contact for inquiries is Nadia Firestone, reachable via phone at 520-692-1411 or email at nadia.i.firestone.civ@army.mil. This contract falls under the Office category and is part of the broader Department of Defense infrastructure maintenance efforts focused on securing and restoring critical perimeter fencing assets at the Fort Huachuca installation.

Other Heavy and Civil Engineering Construction

POSTED

DEADLINE

Capstone Project Design and Evaluation for DE Certification ProgramThe contract entails the design and evaluation of a capstone project for the DE Certification Program, specifically tailored to allow trainees to apply digital engineering and model-based systems engineering principles to authentic U.S. Army acquisition scenarios. The project must incorporate structured rubrics for assessment, targeted mentoring support, and a clear methodology for evaluating trainee performance against defined competency benchmarks. Its purpose is to bridge theoretical knowledge with practical application in a military acquisition context, ensuring participants develop the skills necessary to contribute effectively to modern defense systems development. This effort is classified as a subcontract under NAICS code 611430, indicating an educational services focus, and is issued by the Department of Defense through the W6QK Acc-Apg Cont Ct Software Sector. The solicitation was posted on August 5, 2026, with a response deadline of August 11, 2026, at 4:00 PM. While details such as the place of performance and point of contact are not specified, the project is expected to operate within the broader framework of Army modernization initiatives and must align with existing DE and MBSE standards used across defense acquisition programs. The successful bidder will be responsible for creating a scalable, measurable, and pedagogically sound capstone experience that delivers tangible outcomes for certification readiness.

Professional and Management Development Training

POSTED

DEADLINE

Data Governance and Digital Thread Implementation TrainingThe contract seeks to deliver specialized training on managing engineering data through digital thread methodologies, focusing on establishing end-to-end traceability and seamless interoperability across disparate systems and platforms. Participants will learn how to implement governance structures that ensure data integrity, consistency, and accessibility throughout the product lifecycle, enabling efficient collaboration and decision-making in complex engineering environments. The training is designed to equip technical teams with practical skills to align data processes with industry best practices and support modernized defense acquisition and systems engineering workflows. Issued under the NAICS code 541690 for other professional, scientific, and technical services, this subcontract falls under the Department of Defense’s W6QK Acc-Apg Cont Ct Software Sector and is open for responses until August 11, 2026. The work is not subject to a specific set-aside classification, and performance location details are not specified, indicating flexibility in delivery format or site. While no point of contact is listed, the opportunity is accessible via the SAM.gov portal, and proposers are expected to demonstrate expertise in digital thread frameworks, data governance, and cross-platform integration within defense or aerospace engineering contexts.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

Cybersecurity Integration via NIST RMF in Digital Engineering TrainingThe contract seeks to deliver specialized training on integrating the NIST Risk Management Framework into Digital Engineering workflows to enhance secure development practices, ensure proper data handling, and maintain model integrity throughout the system lifecycle. This effort is targeted at organizations and personnel involved in cyber-secure engineering environments, with a focus on embedding NIST RMF controls directly into digital engineering processes to reduce vulnerabilities and promote compliance with federal cybersecurity standards. The training must be practical, hands-on, and aligned with current DoD cyber resilience objectives. Issued as a subcontract under the Department of Defense’s W6QK Acc-Apg Cont Ct Software Sector, the opportunity is classified under NAICS code 541690 for Other Scientific and Technical Consulting Services. The solicitation was posted on August 5, 2026, with a response deadline of August 11, 2026, at 4:00 PM. There is no specified set-aside status or place of performance location, and the contract does not include a designated point of contact. Interested parties must submit proposals through the provided SAM.gov link before the deadline to be considered for award.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

AI and LLMs Integration in Systems Engineering TrainingThe contract seeks the development and delivery of specialized training modules focused on integrating artificial intelligence and large language models into systems engineering workflows, with emphasis on practical applications in requirements generation, risk analysis, and documentation automation. The training is designed to equip systems engineering professionals with the skills to leverage AI tools effectively, improving efficiency and accuracy in critical project phases. The work is structured as a subcontract under the Department of Defense, specifically managed by the W6QK Acc-Apg Cont Ct Software Sector, and classified under NAICS code 541715 for research and development in the physical, engineering, and life sciences. The solicitation was posted on August 5, 2026, with a deadline for responses set for August 11, 2026, at 4:00 PM. Performance location and specific agency office details are not provided, and no set-aside provisions or point of contact information are included in the posting.

Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

DEADLINE