Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 30 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

AI System Heat Rejection and Cooling Installation

Active

Federal

Response Deadline10/05/2026, 09:30:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for the AI System Heat Rejection and Cooling Installation involves the installation and integration of cooling systems for prime contractors at Argonne National Laboratory. The primary objective is to implement cooling-connection locations capable of meeting a maximum heat-rejection requirement of 10 MW through the use of cooling distribution units, heat exchangers, or liquid cooling manifolds. The project requires the delivery of a fully operational heat rejection system integrated with compute racks while maintaining strict compliance with Department of Energy Environmental, Safety, and Health standards. This effort falls under NAICS code 238220 and is managed by a DOE contractor for the Department of Energy.

General Info

Installation of 10 MW AI system cooling and heat rejection at Argonne Laboratory.

Agency

Department Of Energy → Argonne National Labor - DOE ContractorView Agency

NAICS

238220 - Plumbing, Heating, and Air-Conditioning ContractorsView NAICS

Place of Performance

IL

Set-Aside

NONE

Documents

This scope was carved out of 6-B143-P-00251-00.

The full solicitation package (17 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Request for Proposal: ALCF Equinox AI System

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedSep 18

subcontract

Response DeadlineOct 5

Submission deadline

Response Deadline

10/05/2026, 09:30:00 PM UTCin 16 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Energy → Argonne National Labor - DOE Contractor

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Energy → Argonne National Labor - DOE Contractor

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Installs and integrates cooling systems for prime contractors on Argonne National Laboratory (DOE) projects. Implements cooling-connection locations to meet a maximum Heat-Rejection Requirement of 10 MW using liquid cooling manifolds, heat exchangers, or cooling distribution units (CDUs). Complies with DOE Environmental, Safety, and Health (ESH) standards. Delivers an operational heat rejection system integrated with compute racks.

Similar Contracts

Same NAICS industry code

PIDC Project 3 - Dorm RTU Replacement and SCADA

Solicitation # 70CMSW26D00000004

Solicitation 70CMSW26D00000004 is a firm-fixed-price construction task order issued by U.S. Immigration and Customs Enforcement for the Port Isabel Detention Center in Los Fresnos, Texas. The project consists of two primary scopes of work: the replacement and upgrade of rooftop HVAC units for Alpha, Bravo, Charlie, and Delta dorms, and a SCADA system upgrade including the installation of two chemical feed pumps. The HVAC systems must be high quality, durable, and coastal weather resistant, while the SCADA system must comply with Texas Commission of Environmental Quality standards. The estimated magnitude of the project is between 1.2 million and 1.5 million dollars, with a period of performance of 365 days from the date of award. The contract is set aside for 8(a) Multiple Award Construction Contract holders and will be awarded to the offeror proposing the lowest total evaluated price. Key requirements include a one-year warranty for installation and craftsmanship, the provision of performance and payment bonds, and adherence to Davis-Bacon wage determinations for Cameron County. Due to the secure nature of the facility, all personnel must undergo rigorous employment screening, including criminal history and citizenship checks, and pass the DHS E-Verify program. The contractor must provide a qualified Project Manager with at least five years of federal contracting experience and submit a comprehensive quality control and safety plan for government approval.

Bristol Alliance of Companies

POSTED

about 12 hours ago

DEADLINE

2026-Clearfield-Bldg E8 Welding HVAC

Solicitation # 2026- Clearfield- Welding Bldg. E8 HVAC Replacement

Management & Training Corporation (MTC) is seeking fixed-price lump sum bids for a subcontracting opportunity to replace the HVAC system at the Clearfield Job Corps Center, specifically for Building E8 Welding in Clearfield, Utah. The scope of work includes the complete change-out of the existing motor, provision of all necessary wiring, conduit, breakers, and rigging services, and ensuring the system is fully operational post-installation. Key deliverables include startup and testing documentation, as well as onsite training for maintenance personnel. All work must comply with OSHA requirements, federal, state, and local codes, and site safety procedures. This is a small business set-aside opportunity under NAICS code 238220. Bids will be evaluated based on overall best value, and a physical site visit and signature on the attendance roster are mandatory for consideration. Required submission documents include the MTC Bid for Lump Sum Contract form, a detailed cost breakout on company letterhead, and a bid bond guarantee. The deadline for submission via email to the designated points of contact is September 19, 2026, at 3:00 PM MST. The contract requires adherence to Davis-Bacon prevailing wage rates for Davis County, Utah, and incorporates various FAR clauses, including those regarding the Buy American Act and combating trafficking in persons. Awarded contractors must provide a 12-digit Unique Entity ID (UEI) and a 9-digit Tax ID. Payment will be processed via pay applications using AIA G702 and G703 forms based on a submitted Schedule of Values. Performance and payment bonds must be submitted within five business days of the Intent to Award letter.

Management & Training Corporation

POSTED

about 12 hours ago

DEADLINE

in about 5 hours

Joliet JCC Dorm Bathroom Renovations

Solicitation # joliet-jcc-dorm-bathroom-renovations

Management & Training Corporation (MTC), operator of the Joliet Job Corps Center for the US Department of Labor, is seeking a subcontractor for the renovation of thirty-two female dorm room bathrooms in Joliet, Illinois. This fixed-price, single lump sum contract, with an estimated value between $100,000 and $250,000, falls under NAICS 238220. The scope of work includes providing all labor, materials, and equipment to rod and clear sanitary drain lines and replace existing shower assemblies with Delta Hydrof ProCrylic units or comparable alternatives. The project must be completed within 60 consecutive business days following a written Notice to Proceed. Bids are due by September 23, 2026, and must be submitted via email. To be considered, bidders must have completed a mandatory site visit and provided a detailed cost breakout on company letterhead. Required documentation includes a bid bond of 20% for bids over $25,000, a completed MTC Supplier Packet, and a signed SF1413 form. Award decisions will be based on overall best value. The contractor must adhere to strict regulatory and administrative requirements, including paying prevailing wages per Executive Order 13658 and submitting weekly certified payroll reports. Insurance minimums include $1 million per occurrence for general liability, $1 million for auto insurance, and $500,000 for workers compensation. Additionally, performance and payment bonds from a surety with at least an A- rating are required for awards of $25,000 or more. Final payment is contingent upon the submission of two sets of operation and maintenance manuals and the successful completion of a final inspection.

Joliet Job Corps

POSTED

about 12 hours ago

DEADLINE

CBP7664 Wellness HVAC Compressor Replacement

Solicitation # CBP7664

Management & Training Corporation is seeking bids for a subcontracting opportunity to replace a failed HVAC/refrigeration compressor at the Wellness facility of the Sierra Nevada Job Corps Center in Reno, Nevada. The project, identified as CBP7664, requires the contractor to provide all labor, materials, equipment, and supervision to restore full cooling capacity and operational efficiency. The scope of work is divided into four phases: preparation and environmental safety, demolition and removal, installation of an OEM-specified compressor, and system testing and commissioning. The awarded contractor must complete all work within 30 consecutive business days following the written Notice to Proceed. Bids will be evaluated based on overall best value, considering price, quality, and delivery schedule. Interested bidders must conduct a mandatory site visit and sign an attendance roster before submitting a lump sum bid and detailed cost breakout. For bids equal to or greater than 25,000 dollars, a bid bond of 20 percent is required, as well as performance and payment bonds from an A-rated surety company. The contract is subject to various federal regulations, including the Davis-Bacon Act for prevailing wage compliance in Washoe County, EPA Section 608 for refrigerant recovery, and FAR reporting requirements for first-tier subcontractors if the award exceeds 40,000 dollars. This opportunity is set aside for various small business categories, including SDB, WOSB, HUBZone, and SDVOSB.

Sierra Nevada Job Corps Center

POSTED

about 12 hours ago

DEADLINE

AAL-0880-02 HVAC and Electrical Upgrades Fairbanks

Solicitation # AAL-0880-02

Solicitation AAL-0880-02 involves HVAC and electrical upgrades at the Fairbanks FSS facility in Alaska. The scope of work includes the replacement of the chiller, four AC units, and chilled-water piping, along with all associated electrical systems. Key technical requirements include the modification of HVAC circuits and Panel P1, as well as the provision of temporary and redundant cooling systems to maintain operations throughout the construction period. The project concludes with system startup, testing, commissioning, FAA training, and the completion of punch-list items. The project has an estimated construction magnitude between 250,000 and 500,000 dollars and is categorized under NAICS code 238220. It is designated as a set-aside for various small business categories, including Small Disadvantaged, Women-Owned, HUBZone, and Veteran-Owned small businesses. The proposed start date for the work is April 15, 2027. Primary coordination for this effort is managed by Masanori Akers of PTSI Managed Services Inc. on behalf of the FAA.

PTSI Managed Services Inc.

POSTED

about 12 hours ago

DEADLINE

Main Building 1 Wing 5 – Six Rooftop HVAC Unit Replacement – Glenmont Job Corps Center

Solicitation # S26-010

The Glenmont Job Corps Center is soliciting proposals from qualified, New York State licensed contractors for the replacement and installation of HVAC equipment within Main Building No. 1, Wing 5 (Education Building) in Glenmont, New York. The project involves replacing two 7.5-ton split-system units for the auditorium, one 6-ton rooftop unit for the library and computer lab, and one 12.5-ton rooftop unit for the north and east wing classrooms. Additionally, the scope includes installing four 2-ton ductless mini-split heat pump systems, removing a window air-conditioning unit, and abandoning two 5-ton rooftop units in place. Comprehensive associated work encompasses demolition, roof curbs and penetrations, ductwork, refrigerant and condensate piping, electrical work, controls, structural roof evaluations, and fire alarm and duct smoke detector installations, concluding with testing, balancing, and commissioning. This solicitation is set aside for various small business categories, including SDB, WOSB, HUBZone, and Veteran-Owned Small Businesses. The project must be completed within 210 calendar days following the written Notice to Proceed, and the facility will remain operational throughout the construction period. Key deadlines include a pre-proposal site walkthrough on September 10, 2026, with vendor questions due by September 14, 2026. Final proposals must be submitted by September 21, 2026, at 4:00 PM ET. All work must comply with applicable New York State codes, safety regulations, and environmental requirements.

Adams and Associates, Inc.

POSTED

about 12 hours ago

DEADLINE

Replace HVAC Systems in the following buildings on our campus –1.) 1091 – Glazing/Welding/Heavy Mechanics Bldg

Solicitation # 26-140

This project involves the replacement of a failing 10-ton pad-mounted gas-fired packaged HVAC unit at the Atterbury Job Corps Center in Edinburgh, Indiana, specifically within Building 1091. The contractor must install a new 12.5 SEER packaged unit utilizing non-R22 refrigerants, such as R-410A or R-454B, while reusing existing ductwork, electrical disconnects, and thermostat wiring. Key deliverables include providing a sequenced construction schedule within 10 days of the Notice to Proceed and ensuring the old unit and labeled recovered refrigerant are left at the maintenance building for parts. The project requires a one-year guarantee of workmanship and manufacturer product warranties. The solicitation is a single lump sum contract awarded based on best value, evaluating price, quality, past performance, and schedule. Mandatory requirements for bidders include attending the site visit on September 23, 2026, maintaining an active SAM.gov registration with a Unique Entity ID, and holding a valid Indiana Contractor's License. Proposals are due by October 5, 2026, and must include a detailed cost breakdown, insurance certificates, and certification of compliance with Davis-Bacon Act wage rates. All work must adhere to EPA, OSHA, and state and local building codes. Payment terms are Net 30, and the center is tax-exempt.

Adams & Associates, Inc.

POSTED

about 12 hours ago

DEADLINE

Inland Empire HVAC Tile & Landscape Trade

Solicitation # inland-empire-hvac-tile-landscape-trade

Inland Empire Job Corps

POSTED

about 12 hours ago

DEADLINE

Replace HVAC Systems in the following buildings on our campus –1.) ABL Dormitory

Solicitation # 26-141

Adams & Associates, Inc. is soliciting a single lump sum subcontract for the replacement of HVAC systems at the Atterbury Job Corps Center ABL Dormitory in Edinburgh, Indiana. The project requires replacing eight vertical up-flow gas-fired furnaces with DX-coils and matched air-cooled condensing units, specifically replacing R-22 Bryant units with new 12.5 SEER packaged units using non-R22 refrigerants such as R-410A or R-454B. The scope includes reusing existing electrical disconnects, ductwork, and thermostat wiring, while ensuring all recovered refrigerant is labeled and left on-site. All work must comply with EPA, OSHA, and Indiana state and local building codes. Eligible bidders must be registered in SAM.gov with a valid Unique Entity ID and hold a valid Indiana Contractor's License. A mandatory site visit is scheduled for September 23, 2026, with proposals due by October 5, 2026. Proposals must be submitted on company letterhead and include a detailed cost breakdown, a timeline for substantial completion, a 90-day bid guarantee, and certification of compliance with Davis Bacon Act wage rates. Award will be based on best value, evaluated across price (60 points), quality (20 points), past performance (10 points), and schedule (10 points). The contractor is responsible for all material storage and must provide proof of automobile liability and workers' compensation insurance, naming Adams and Associates, Inc. as an additional insured. Final payment is subject to Net 30 terms and requires the submission of a completed SF 1413, certified payroll records, and a release of liens from all subcontractors. Workmanship is guaranteed for one year from the date of substantial completion.

Adams & Associates, Inc.

POSTED

about 12 hours ago

DEADLINE

Replace HVAC Systems in the following buildings on our campus –1.) ABL Dormitory

Solicitation # 26-141

This subcontracting opportunity, managed by Adams and Associates, Inc. for the Atterbury Job Corps Center in Indiana, involves the replacement of aging R-22 HVAC systems in the ABL Dormitory. The scope of work requires replacing existing Bryant air-cooled condensing units and coils serving common areas and dormitory Wings A, B, C, and D with new 12.5 SEER packaged units utilizing non-R22 refrigerants, such as R-410A or R-454B. The contractor will reuse existing electrical disconnects, ductwork, and thermostat wiring, and must ensure all recovered refrigerant is labeled and left on-site. All work must comply with EPA and OSHA regulations, as well as state and local building codes, with Indiana regulations prevailing if more stringent. The project is a single lump sum contract, with award based on best value considering price (60 points), quality (20 points), past performance (10 points), and schedule (10 points). Mandatory requirements for bidders include attending a site visit on September 23, 2026, maintaining an active SAM.gov registration with a Unique Entity ID, and holding a valid Indiana Contractor's License. Proposals are due by October 5, 2026, and must include a detailed cost breakdown, a timeline for completion, and certification of compliance with Davis-Bacon Act wage rates. Final payment is subject to net 30 terms and is contingent upon the submission of a completed SF 1413, certified payroll records, and the release of all subcontractor and material supplier liens.

Adams & Associates, Inc.

POSTED

about 12 hours ago

DEADLINE

AAL-0810-01 Sitka (SIT) Flight Service Station (FSS) Fire Esc

Solicitation # AAL-0810-01

Solicitation AAL-0810-01 is a design-build construction project for the Sitka Flight Service Station in Sitka, Alaska. The scope of work involves the design and construction of an access stair platform serving the third floor of the facility. Key deliverables include the initial site survey, obtaining necessary permits, final design development, construction, inspections, punch-list completion, and the delivery of as-built drawings. The project has an estimated construction magnitude between 250,000 and 500,000 dollars and is proposed to start on February 1, 2027. This opportunity is designated as a presolicitation and is set aside for various small business categories, including Small Disadvantaged Businesses, Women-Owned Small Businesses, HUBZone Small Businesses, and Veteran-Owned Small Businesses. The project falls under NAICS code 238220 and is managed by PTSI Managed Services Inc.

PTSI Managed Services Inc.

POSTED

about 12 hours ago

DEADLINE

WOJC - Buried Domestic Hot Water (DHW) Pipe Repair

Solicitation # WOJC – Buried Domestic Hot Water (DHW) Pipe Repair

Education and Training Resources is seeking quotes for a subcontracting opportunity to repair a compromised buried domestic hot water pipe at the Westover Job Corps Center in Chicopee, Massachusetts. The scope of work involves excavating a trench approximately 15 linear feet long to a depth of 8 feet, removing and repairing up to 10 linear feet of piping with a diameter up to 4 inches, and installing insulation on the new piping. The selected contractor must provide all labor, materials, and equipment, ensuring all work adheres to industry standards, applicable construction codes, and OSHA regulations. A one-year equipment and workmanship warranty is required, and project close-out necessitates a signed punch list. Bids are due by October 2, 2026, at 4:00 PM, with a site walkthrough scheduled for September 23, 2026. To be eligible for award, bidders must submit a completed bid sheet with a detailed cost breakdown, a proposed service schedule, and proof of required Massachusetts licensing and credentials. Administrative requirements include an active SAM.gov registration with a Unique Entity ID, a W-9, a Vendor Acknowledgement Form, and applicable certificates of insurance. The contract mandates compliance with the Davis-Bacon Act and the Service Contract Act, requiring the submission of weekly certified payroll reports. Award selection is at the sole discretion of Education and Training Resources and is not automatically granted to the lowest bidder.

Westover Job Corps Center

POSTED

about 12 hours ago

DEADLINE

More opportunities from Department Of Energy → Argonne National Labor - DOE Contractor

Same awarding agency

AI System Integration and Acceptance TestingThis subcontract for AI System Integration and Acceptance Testing supports prime contractors on Department of Energy projects at Argonne National Laboratory. The scope of work involves performing final assembly, integration, and validation, as well as managing the installation and transition-to-service processes. Key deliverables include a fully operational production resource, final bill of materials, rack elevations, and comprehensive as-built documentation for hardware replacement and operating maintenance. The project falls under NAICS code 541512 and requires personnel to obtain specific site-access clearances for Argonne National Laboratory. Interested parties must respond by October 5, 2026, to meet the established deadline for this technical integration effort.

Computer Systems Design Services

POSTED

DEADLINE

AI System Software Deployment and LicensingThis subcontract for AI System Software Deployment and Licensing focuses on the supply and installation of a comprehensive software environment for prime contractors working on Department of Energy projects at Argonne National Laboratory. The scope of work includes providing essential software licenses, telemetry tools, and resource management software, specifically incorporating NVIDIA AI Enterprise software. A critical requirement of the deployment is to ensure that there is no ongoing operational dependence on cloud-hosted services. The contractor is responsible for delivering a fully installed software stack along with valid licenses and detailed telemetry documentation for software licensing monitoring. This opportunity falls under NAICS code 541511 and was posted on September 18, 2026, with a response deadline of October 5, 2026.

Custom Computer Programming Services

POSTED

DEADLINE

High-Density Power Distribution InstallationThis subcontract for High-Density Power Distribution Installation involves the installation of electrical infrastructure for prime contractors on Department of Energy projects at Argonne National Laboratory. The scope of work includes installing 480V five-wire service power whips to manage a Design Maximum IT Electrical Load of 10 MW through the use of industrial power distribution units, ultimately delivering tested power distribution to 16 compute racks. Qualified providers must hold the necessary electrical licensing and strictly adhere to all Laboratory safety and site-access requirements. The project falls under NAICS code 238210, with a response deadline of October 5, 2026.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

AI Cluster Network Integration and SupplyThe AI Cluster Network Integration and Supply subcontract focuses on providing and configuring high-speed networking fabric for prime contractors operating on Department of Energy projects at Argonne National Laboratory. The scope of work involves the implementation of High-Speed East-West Networks for inter-node communication and North-South Ethernet Networks for storage and external integration, utilizing Juniper Apstra artifacts. Deliverables include the operational network fabric, detailed cable schedules, and comprehensive configuration diagrams. This engagement requires strict adherence to NIST security frameworks and compliance with SOC2, PCI-DSS, and HITRUST standards. The project is categorized under NAICS code 517110, with a response deadline of October 5, 2026.

Wired Telecommunications Carriers

POSTED

DEADLINE

NVIDIA GB300 NVL72 Rack-Scale Systems SupplyThis subcontract involves the supply of core compute hardware for prime contractors working on Department of Energy projects at Argonne National Laboratory. The primary objective is the delivery of sixteen NVIDIA GB300 NVL72 compute racks, which must be aligned with the NVIDIA AI Factory model to support the Equinox AI System. The agreement requires the delivery of sixteen fully configured compute racks under NAICS code 334111. A critical requirement of the contract is strict adherence to Suspect Counterfeit/Parts Certification to guarantee that no counterfeit components are integrated into the hardware. The solicitation was posted on September 18, 2026, with a response deadline of October 5, 2026.

Electronic Computer Manufacturing

POSTED

DEADLINE

Request for Proposal: ALCF Equinox AI System

Solicitation # 6-B143-P-00251-00

UChicago Argonne, LLC, operating Argonne National Laboratory under a Department of Energy prime contract, has issued Request for Proposal 6-B143-P-00251-00 for the procurement of the Equinox AI System. This project involves the acquisition of a scalable, rack-scale artificial intelligence computing environment designed to support the Genesis Mission and DOE science. The required Base System consists of sixteen NVIDIA GB300 NVL72 compute racks, including all necessary software, licensing, installation, and integration services. The system must adhere to strict facility constraints, including a maximum IT electrical load and heat-rejection requirement of 10 MW and a data-center footprint of under 6,000 square feet. The contract includes a five-year period for maintenance and support following system acceptance at the laboratory in Lemont, Illinois. The procurement utilizes a best-value tradeoff approach, prioritizing technical merit over price. Proposals must be submitted in three separate parts: a Business/Management proposal for a pass/fail responsibility determination, a Technical Proposal evaluated on an adjectival scale, and a Price Proposal. Financing options include a firm-fixed-price structure and a Lease-to-Ownership (LTO) arrangement, governed by a Master Lease to Ownership Agreement. Key compliance requirements include adherence to FAR and DEAR regulations, NIST cybersecurity standards, and strict Environment, Safety and Health regulations. Final acceptance of the system is contingent upon the successful execution of an Acceptance Test Plan covering functional, performance, and stability criteria. Proposals are due by October 5, 2026.

Electronic Computer Manufacturing

POSTED

DEADLINE

Pump Installation Hardware SupplyThis subcontract for Pump Installation Hardware Supply involves the procurement and delivery of compatible mounting and sealing hardware for prime contractors working on UChicago Argonne, LLC projects. The scope of work includes providing two sets of brackets, gaskets, and stainless steel bolts and nuts, with a specific requirement to certify that no suspect or counterfeit parts are utilized. The materials are to be delivered DAP to Lemont, Illinois. This opportunity is associated with the Department of Energy and Argonne National Labor, falling under NAICS code 332722. The response deadline for this requirement is September 21, 2026.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE

Submersible Wastewater Pump Motor SupplyThis subcontract involves the procurement and delivery of two submersible wastewater pump motors for prime contractors working on UChicago Argonne, LLC projects. The equipment must be delivered DAP to Lemont, Illinois, under the oversight of the Department of Energy. The supplier is required to certify that no suspect or counterfeit parts are utilized in the equipment. Additionally, the contract mandates strict compliance with FAR 52.204-26 regarding the use of covered telecommunications equipment.

Pump and Pumping Equipment Manufacturing

POSTED

DEADLINE

Submersible wastewater pump motor

Solicitation # 6-B169-Q-00449-00

Argonne National Laboratory is soliciting quotations for the procurement of two submersible wastewater pump motors and associated installation hardware, including brackets, gaskets, and stainless bolts. The pump motors must meet specific technical requirements: 460/230 volts, 4.7HP, 1750 RPM, 60Hz 3-phase, with a maximum flow of 447.8 GPM and a maximum head of 41.7 ft. The award will be made based on the Lowest Price, Technically Acceptable (LPTA) criteria. Delivery is required DAP Lemont, IL 60439, and offerors must provide the total lead time from purchase order to final delivery. Submission requirements include a completed and signed ANL-70 Request for Quotation, the ANL-70A Representations and Certifications, and a clear statement of the country of origin. Compliance with the Buy American Act is mandatory, with domestic content thresholds ranging from 60 to 75 percent depending on the delivery year. The contract is governed by UChicago Argonne, LLC terms and conditions and incorporates various FAR and DEAR clauses, including those regarding whistleblower protections, equal opportunity, and the prohibition of certain telecommunications equipment. Payment terms are Net 30 days, and the laboratory reserves the right to inspect all supplies for conformity prior to acceptance. Quotations must be submitted by September 21, 2026.

Measuring, Dispensing, and Other Pumping Equipment Manufacturing

POSTED

DEADLINE

Window Treatment Installation ContractorThis subcontract for window treatment installation supports prime contractors on UChicago Argonne, LLC projects. The selected contractor is responsible for mounting and configuring aluminum tubes and installing and testing Somfy or equivalent drive motors for solid, dual color, and room darkening shades to deliver fully operational systems. The contractor must coordinate site access with the ANL Building Manager group and strictly adhere to DOE directives regarding site access and the handling of Controlled Unclassified Information per DOE Directive O471.7. This opportunity is associated with NAICS code 238390 and is managed by the Argonne National Laboratory under the Department of Energy.

Other Building Finishing Contractors

POSTED

DEADLINE

Specialized Window Shade and Motorized Hardware SupplierThis subcontract opportunity with the Argonne National Laboratory DOE Contractor involves the supply of specialized window shades and motorized hardware for prime contractors on UChicago Argonne, LLC projects. The scope of work includes the manufacture and delivery of solid, dual color, and room darkening roller shades featuring aluminum construction for rollers and tubes, along with Somfy or equivalent drive motors and necessary mounting hardware. The supplier is responsible for delivering complete window shade units, motorized hardware, and installation accessories while ensuring full compliance with FAR 52.204-26 and DEAR 952.223-78 regulations. This requirement falls under NAICS code 339999 and is centered in the 60439 zip code area, with a response deadline of September 23, 2026.

All Other Miscellaneous Manufacturing

POSTED

DEADLINE

Window Treatments (Building Managers, Site-Wide)

Solicitation # 6-S176-Q-00448-00

Argonne National Laboratory is soliciting a contractor for the supply and installation of window treatments across its site under solicitation 6-S176-Q-00448-00. This blanket agreement, which includes a base year and two option years, is based on a good faith annual estimate of 80,000 dollars, though it does not obligate the laboratory to specific quantities. The scope of work encompasses the provision of materials, such as aluminum roller shades and Somfy motors, and professional installation services. To ensure timely service for onsite measurements and quoting, vendors must maintain a primary business location within 25 miles of the laboratory in Lemont, Illinois, and provide three commercial references of similar scope. The contract will be awarded based on the lowest price, technically acceptable criteria. Technical requirements include adherence to NFPA 701 fire classifications, ASTM bacterial and fungal standards, and NRTL listing for motorized equipment. Offerors must submit a completed price list, representations and certifications, and evidence of technical capabilities by September 23, 2026. Compliance with the Buy American Act is required, with specific domestic content percentages based on the delivery year. The contractor is responsible for all labor, materials, and the removal of old treatments and debris, with final acceptance contingent upon a post-installation inspection by the laboratory.

Blind and Shade Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS