Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Aircraft Structural Sustaining Engineering Support

Active

Federal

Response Deadline08/20/2026, 08:30:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract seeks comprehensive structural sustaining engineering support for the HH-60W airframe, focusing on ensuring long-term airworthiness through detailed assessments of structural integrity, fatigue life analysis, and the development of viable repair methodologies. These technical efforts are critical to maintaining operational readiness and safety by identifying potential degradation mechanisms and defining engineering solutions that extend the service life of the airframe under real-world operational loads. This is a subcontract opportunity under the Department of Defense, specifically managed by the FA8552 Aflcmc Wiu office, with a North American Industry Classification System code of 541330 indicating engineering services. The solicitation was posted on July 20, 2026, and responses are due by August 20, 2026, at 8:30 PM. Performance location details are unspecified, but the work will directly support the HH-60W fleet’s sustainment objectives, requiring contractors to demonstrate expertise in military aircraft structural analysis and repair innovation.

General Info

Engineer structural sustainment for HH-60W airframe to ensure airworthiness and extend service life under DoD contract.

Agency

Department Of Defense → FA8552 Aflcmc WiuView Agency

NAICS

541330 - Engineering ServicesView NAICS

Place of Performance

GA, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 20

subcontract

Response DeadlineAug 20

Submission deadline

Response Deadline

08/20/2026, 08:30:00 PM UTCin 12 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → FA8552 Aflcmc Wiu

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → FA8552 Aflcmc Wiu

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Provide structural integrity assessments, fatigue life evaluations, and repair methodology development for the HH-60W airframe to ensure continued airworthiness.

Similar Contracts

Same NAICS industry code

SEEKING QUALIFIED SUBCONSULTANTS IN RIVERSIDE COUNTY/SOCAL TO SUPPORT WELL REPLACEMENT PROJECT WITH WATER DISTRICT

Solicitation # seeking-qualified-subconsultants-riverside-countysocal-support-well-replacement-project-water

GHD Inc. is soliciting qualified subconsultants to support the Corydon Well Replacement Design Project for Elsinore Valley Municipal Water District in Riverside County, California, with a focus on engaging Disadvantaged Business Enterprises, Small Business Enterprises, Women-Owned Business Enterprises, Minority-Owned Business Enterprises, and other certified small businesses including those owned by veterans and service-disabled veterans. The project requires professional services covering engineering, environmental analysis, surveying, geotechnical investigations, permitting, public outreach, and utility location, under NAICS code 541330 and related codes. Interested firms must submit a qualifications package to Charlie Brown at charles.brown@ghd.com by August 7, 2026, and request solicitation documents no later than 5 p.m. PST on August 14, 2026. The formal response deadline for proposals is September 15, 2026, and the contract is set aside for small and disadvantaged businesses as defined by the SBA and Department of Transportation guidelines.

POSTED

about 9 hours ago

DEADLINE

in about 1 month

Corydon Well Replacement (C2305)

Solicitation # C2305

Ardurra Group, Inc. is soliciting proposals for the Corydon Well Replacement Project (C2305), aimed at designing a new municipal groundwater production well to replace and decommission the existing Corydon well in California. The project requires comprehensive professional services including structural, geotechnical, architectural, corrosion, noise, survey, and full-time on-site construction management oversight, delivered in two distinct phases: Phase 1 focuses on technical specifications, civil site design, and bidding support for drilling and abandonment of the old well, aligned with Riverside County and State Water Resources Control Board standards; Phase 2 involves detailed engineering design for equipping, testing, and commissioning the new well, including architectural, mechanical, electrical, and instrumentation and controls systems. The scope includes preparation of a Preliminary Design Report at up to 30% design level, review of approximately 200 submittals, assistance with permit amendments, development of record drawings reflecting field changes, and support for commissioning and operator training. The contract is a professional services agreement with an estimated total project cost of $2,260,788, including $2 million in construction costs and a negotiated professional services fee to be determined post-award, with a not-to-exceed limit to be established. The solicitation is designated as a Small Business Set-Aside under SBA and DBE categories, requiring all offerors to be certified as Disadvantaged Business Enterprises and to provide detailed information on any DBE subconsultants utilized, along with explanations for any not selected. Proposals must include compliance certifications covering American Iron and Steel, Lobbying, Debarment and Suspension, System for Award Management, Executive Order N-6-22, Conflict of Interest, Insurance Requirements, and Public Works Registration, all submitted via Attachment “2,” and must adhere to Build America Buy America Act provisions requiring domestic content documentation and waiver procedures for non-compliant materials. Technical evaluation prioritizes relevant experience and qualifications at 25%, followed by understanding of the project and approach (25%), scope and schedule (20%), innovation (10%), cost value (10%), and overall proposal quality (10%), with award based on demonstrated competence rather than lowest price. The proposal deadline is September 1, 2026, submitted exclusively through the PlanetBids portal, and responses must remain valid for 180 days. Payment must be processed through the Treasury’s ASAP system, with remittance details provided for both electronic and check

Ardurra Group, Inc.

POSTED

about 9 hours ago

DEADLINE

Corydon Well Replacement Project - Professional Design, Bidding Support, Engineering Services During Construction

Solicitation # corydon-well-replacement-project-professional-design-bidding-support-engineering-services-during-0

The Corydon Well Replacement Project, managed by the Elsinore Valley Municipal Water District, seeks professional design, bidding support, and ongoing engineering services during construction for a water infrastructure upgrade in Lake Elsinore, California. The solicitation, identified as C2305, is open to contractors capable of delivering comprehensive engineering expertise throughout the project lifecycle, from initial design through construction oversight. The project is categorized under NAICS code 541330 for architectural and engineering services and includes specific participation goals for Disadvantaged Business Enterprises aligned with Department of Transportation guidelines, encouraging participation from certified DBEs. The proposal response deadline is September 1, 2026, with all submissions required to meet the technical and compliance standards outlined by the contracting agency. AKM Consulting Engineers is the designated contracting authority, with Katie Neubauer serving as the primary point of contact for inquiries and submissions. Interested parties must navigate the federal opportunity portal via the provided SBA link and adhere to all submission protocols tied to the solicitation number. While location details are limited to the state of California, performance is exclusively centered on the Corydon Well site in Lake Elsinore. The agency does not specify a set-aside type beyond DBE participation, and no detailed budget or scope of work is provided in the posting, suggesting that proposers are expected to thoroughly review supplemental materials and site conditions. All communication and documentation must be directed through the provided contact information to ensure timely consideration.

AKM Consulting Engineers

POSTED

about 9 hours ago

DEADLINE

Corydon Well Replacement Project – Professional Design, Bidding Support and Engineering Services During Construction

Solicitation # WO# C2305

The Corydon Well Replacement Project entails the design of a new municipal groundwater production well to replace and permanently abandon the existing Corydon Well, located on Elsinore Valley Municipal Water District property, with full engineering support for site facilities, construction management, and hydrogeological oversight throughout the drilling and equipping phases. The scope spans two phases: Phase One involves technical specifications, civil site design, line-bid items, bidding support, and full-time on-site construction management to ensure compliance with Riverside County and California State Water Resources Control Board standards for well construction and abandonment, including sanitary seal placement per AWWA guidelines and a 24-inch diameter stainless steel Ful-Flo louvered well screen matching the existing casing depth. Phase Two focuses on architectural, civil, mechanical, structural, electrical, and instrumentation and controls design for well equipping, testing, and commissioning, supported by engineering services during construction. The project is governed by the Build America, Buy America Act and 2 CFR Part 184, mandating domestic content in materials and strict documentation of origin for iron, steel, and manufactured products, with bidders required to certify best-effort sourcing and compliance through formal submittals. Federal funding from a BOR Grant up to $400,000 imposes adherence to 2 CFR Part 200, including audit rights, debarment and suspension requirements, and lobbying restrictions under the Byrd Act, while also triggering Clean Air and Clean Water Act provisions for subcontracts exceeding $150,000. The contract demands an integrated team of hydrogeologists, civil and structural engineers, electrical and instrumentation specialists, surveyors, geotechnical analysts, environmental regulators, and construction managers, with key personnel resumes and California licensure required for submission. Proposals must detail hourly rates, task-based cost breakdowns, travel expenses, and a not-to-exceed project value capped at $1,000,000, with payment tied to monthly itemized invoices supported by progress reports and schedule updates reviewed within 45 days. Compliance extensions include public works registration, Executive Order N-6-22 sanctions certification, conflict of interest disclosures, American Iron and Steel certification, SAM and UEI registration, and active California Air Resources Board compliance. Subcontracting to certified DBEs, SDBs, WOSBs, MBEs, and other diverse businesses is strongly desired, with full disclosure of subconsultant participation mandatory. The project is scheduled to begin in November 2

GEI Consultants, Inc.

POSTED

about 9 hours ago

DEADLINE

Technical Reporting and Documentation ServicesThe contract requires the production of formal inspection and overhaul completion reports for each pump, ensuring full compliance with Coast Guard technical and formatting standards. All documentation must be precise, thorough, and aligned with federal maritime regulatory requirements, emphasizing accuracy in detailing inspection findings, maintenance actions, and final validation of equipment readiness. The work is classified as a subcontract under a Small Business Set Aside, specifically designated for small businesses, and falls under the NAICS code 541330 for engineering services. The solicitation was posted on August 8, 2026, with a strict response deadline of August 13, 2026, at 2:00 PM, and the contracting agency is the Department of Homeland Security through its Sflc Procurement Branch 1. Performance location details are not specified, but the deliverables must meet federal standards regardless of where the work is executed.

Sflc Procurement Branch 1(00080)

POSTED

about 13 hours ago

DEADLINE

On-Site Inspection and Acceptance SupportThe contract requires on-site technical support for the government inspection and acceptance of a laser system at White Sands Missile Range, specifically during the readiness verification and documentation phases. The vendor must ensure the system is fully prepared for inspection, provide expert personnel to assist with operational testing, and deliver complete, accurate, and compliant documentation to meet federal acceptance standards. All activities must occur at the designated location in White Sands Missile Range, ZIP 88002, and align with the technical requirements of the Department of Defense under the NAICS code 541330 for scientific research and development services. This is a subcontract opportunity with a response deadline of August 14, 2026, at 5:00 PM, following a posting date of August 8, 2026. The contracting office, W6QK Acc-Apg Adelphi, is part of the Department of Defense and will oversee the evaluation and award process. The support team must possess specialized knowledge of laser systems, be able to interact effectively with government inspectors, and ensure all performance metrics and procedural checks are satisfactorily completed prior to formal acceptance. No set-aside type is specified, and the contract will be awarded based on technical capability, compliance, and responsiveness to the inspection readiness requirements.

W6QK Acc-Apg Adelphi

POSTED

about 13 hours ago

DEADLINE

Design and Engineering of Integrated PA SystemThe contract involves the system design, architectural integration, and development of detailed technical specifications for a district-wide public address system to be implemented across multiple school facilities within North East ISD in Texas. The scope requires comprehensive engineering work to ensure seamless communication capability throughout all designated locations, with strict adherence to life-safety codes and industry standards to guarantee reliability in emergency situations. The project demands coordination with existing infrastructure and future expansion plans, requiring expertise in acoustic planning, network integration, and fail-safe communication protocols. This is a subcontract opportunity under NAICS code 541330, which pertains to architectural, engineering, and related services. The solicitation was posted on August 7, 2026, with responses due by August 27, 2026. All work must be performed within the district’s jurisdiction, and contractors are expected to demonstrate proven experience in large-scale educational facility deployments. The contract does not specify a set-aside program, and while no point of contact is listed, all inquiries and submissions must follow the process outlined through the provided online portal.

POSTED

DEADLINE

A/E RFQ - Ballistic Aero-Optics and Materials Range Phase 2 - Bryan, Texas

Solicitation # TAMUS-RFQ-01-3489

The Texas A&M University System, through its Office of Facilities Planning & Construction, is seeking qualified Architect/Engineer firms to support the Ballistic Aero-Optics and Materials Range Phase 2 project at the RELLIS Campus in Bryan, Texas. This initiative expands upon a facility completed in 2024 to significantly enhance capabilities in aero-optics and hypersonic testing, including extending aero-optics performance beyond 1,000 meters and hypersonic testing beyond 500 meters, while doubling the recovery tube length from 305 meters to approximately 610 meters. The project calls for the design and construction of critical infrastructure components including a new Tail Building at the south end of the range to house the relocated Laser Firing Tank and final sections of the recovery tube, as well as at least two additional test buildings aligned with project test sections. Standardized 14.6-meter range tube sections will be used throughout the expansion. The total planning budget for the project is $70,605,000, with $17,129,803 allocated specifically for the construction contract, while the remainder covers fees, furnishings, contingencies, and related expenses. Selection will proceed through a qualifications-based process where firms submit statements of qualifications via the e-Builder portal by 2:00 p.m. Central Time on September 1, 2026. The top-ranked respondents may be invited to present their qualifications in an interview, but no pricing or cost information is solicited at this stage. All firms must complete the State of Texas Subcontracting Plan form, for which guidance and a tutorial are provided by the system’s Office of Procurement & Business Services. Inquiries must be directed to Jeff Herring at the Texas A&M University System Office of Facilities Planning & Construction, with contact information provided for phone and email. The solicitation is issued under NAICS code 541330 and administered by a state educational agency with no set-aside provisions identified.

Texas A&M University System

POSTED

DEADLINE

Medical Equipment Installation, Calibration, and Training ServicesThe contract involves the comprehensive on-site installation, commissioning, calibration, and clinical training for all medical equipment delivered under the agreement. The scope requires the contractor to ensure that each piece of equipment is properly set up, tested, and verified to meet operational and safety standards before being deployed for clinical use. Clinical training must be delivered to healthcare staff to ensure proficient and safe operation of the equipment, with an emphasis on hands-on instruction tailored to the facility’s workflow and patient care protocols. This subcontract is issued by the Southern Regional Health Authority under the Government of Jamaica and falls under the NAICS code 541330, indicating it relates to medical and diagnostic laboratory services. The work must be performed at the designated healthcare locations within Jamaica, though specific site details are not provided. The contract was posted on August 7, 2026, and all activities must align with the health authority’s operational requirements to support the safe and effective use of medical technology in clinical settings.

Southern Regional Health Authority

POSTED

DEADLINE

Transportation and Economic Corridors - Request for Proposal - CON0025815-OVERLAYS of HWY 49:06 and HWY 49:08

Solicitation # AB-2026-05586

Alberta Transportation and Economic Corridors is soliciting proposals from three pre-qualified firms—Associated Engineering Alberta Ltd., Progressive Engineering and Consulting Ltd. (dba CAP Engineering), and ISL Engineering and Land Services Ltd.—for comprehensive engineering services on two sections of Highway 49: Overlay limits 34.946 to 52.425 (WAC0077705) and 0.000 to 2.486 (WAC0077705). The scope includes preliminary engineering, detailed design, contract tendering, contract administration, construction supervision, post-construction review, and warranty inspections. Proposals must be submitted in two separate PDF files under 10 MB each: one detailing technical qualifications and the other containing the proposal fee. This is a Request for Proposal, not an Invitation to Tender, and only submissions from the listed firms will be considered. Alberta Transportation and Economic Corridors reserves the right to request clarifications, accept or reject proposals without negotiation, or negotiate changes with the selected firm. There is no reimbursement for proposal preparation costs. Selection will be based on overall value, not simply the lowest price. The deadline for submissions is September 2, 2026, at 5:30 AM MT, and inquiries should be directed to Rence Balaccua, Project Procurement Officer.

Transportation and Economic Corridors

POSTED

DEADLINE

Construction Engineering & Inspection (CEI) ServicesThe contract is for Construction Engineering & Inspection services encompassing onsite inspection, materials testing, and quality assurance and quality control activities related to road, grading, and utility construction projects. It is issued as a subcontract under NAICS code 541330 by the Development Authority of Dawson County in Georgia, with a posted date of August 7, 2026, and a mandatory response deadline of September 7, 2026. The scope requires qualified contractors to provide technical oversight throughout all phases of construction, ensuring compliance with engineering standards and specifications. Performance will occur at unspecified locations within Dawson County, and while the exact point of contact and physical address details are not provided, interested parties must submit proposals through the designated state portal by the stated deadline.

Development Authority of Dawson County

POSTED

DEADLINE

Civil Site Engineering & Grading DesignThe contract entails the comprehensive design and engineering services for the site grading, access roads, and overall layout of a 200,000 square foot industrial park, with a strong emphasis on integrating topographic data and accurate earthwork calculations to ensure proper land transformation and infrastructure alignment. The scope requires detailed civil site engineering expertise to translate terrain conditions into practical, buildable designs that meet regulatory and functional standards for industrial development. The work is solicited as a subcontract under NAICS code 541330, with a response deadline of September 7, 2026, and is managed by the Development Authority of Dawson County in Georgia. The project is set to be performed on-site within Dawson County, though specific location details are not provided. The contract was posted on August 7, 2026, and no set-aside provisions or point of contact information are indicated, leaving potential bidders to engage directly through the provided online portal for further instructions and submissions.

Development Authority of Dawson County

POSTED

DEADLINE

More opportunities from Department Of Defense → FA8552 Aflcmc Wiu

Same awarding agency

HH-60W Degraded Visual Environment System(DVES) - FA8552-26-R-B001

Solicitation # FA8552-26-R-B001

The United States Air Force is seeking a system to mitigate the risks associated with Degraded Visual Environments (DVE) for the HH-60W Jolly Green II helicopter, requiring a comprehensive solution that detects hazards in real time during both enroute and terminal phases of flight. This system must function reliably across diverse challenging conditions such as smoke, smog, snow, nighttime sand or dust storms, and aircraft-induced brownout and whiteout scenarios, delivering clear, actionable data to cockpit and cabin displays to enhance situational awareness and safety. The effort encompasses the full lifecycle of the Degraded Visual Environment System (DVES), including design, development, testing, integration, procurement, installation, and deployment of the required hardware and software kits, along with all non-recurring engineering necessary to adapt the system to the HH-60W platform. The contract will be structured with a 24-month base period and the potential to activate up to five additional ordering periods, creating a maximum possible duration of eight years. The solicitation, identified as FA8552-26-R-B001, was posted on June 23, 2026, with proposals due by July 15, 2026. It falls under NAICS code 336411 for aircraft manufacturing and carries no set-aside designation, representing an open competition. The contract office is located at Robins Air Force Base in Georgia, with primary point of contact Theresa Younce and secondary contact Millie Danko available for inquiries. Performance is expected to support Air Force operations globally, with the system intended to significantly improve operational capability and crew safety under adverse visual conditions.

Aircraft Manufacturing

POSTED

DEADLINE

Supply Chain and OEM Parts Procurement SupportThe contract seeks a subcontractor to source, qualify, and supply legacy or obsolete electronic and mechanical components critical to maintaining aging defense systems. This includes the reverse engineering of discontinued parts, conducting first-article testing to validate performance and compliance, and identifying and qualifying alternate suppliers to ensure continuity of supply. The work is essential for sustaining the operational readiness of military platforms where original equipment manufacturer parts are no longer available through standard channels. The contract emphasizes technical rigor in component validation, requiring documented proof of functionality, reliability, and compatibility under operational conditions. The procurement is issued under the Department of Defense through the FA8552 Aflcmc Wiu office and falls under NAICS code 423830 for wholesale trade of electronic parts and equipment. Responses are due by August 20, 2026, with solicitation details accessible through the SAM.gov portal. While no set-aside provisions or specific geographic performance location have been outlined, the work is intended to directly support national defense readiness by mitigating supply chain risks associated with obsolescence. The subcontractor must demonstrate proven capability in handling complex component lifecycle challenges with a focus on quality assurance and regulatory compliance.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

DEADLINE

Technical Data Management and Documentation ServicesThe contract pertains to the comprehensive technical data management and documentation services required for the HH-60W helicopter fleet, with responsibilities encompassing the maintenance, periodic updates, and secure distribution of technical orders, interactive electronic technical manuals, engineering drawings, and configuration management records. The work ensures that all technical documentation remains accurate, current, and accessible to support operational readiness, maintenance activities, and lifecycle management of the aircraft system. This subcontract falls under NAICS code 541330, indicating specialized professional services in technical documentation and engineering support, and is issued under the Department of Defense, specifically by the FA8552 Aflcmc Wiu office, with a submission deadline of August 20, 2026. The services are critical to sustaining the fleet’s mission effectiveness through precise, controlled, and compliant documentation practices.

Engineering Services

POSTED

DEADLINE

Propulsion and Mechanical Systems EngineeringThis contract encompasses engineering support for propulsion and mechanical systems, specifically focusing on the reliability, maintenance, and technical documentation of critical aircraft components including the T700-GE-700 engines, transmissions, rotor systems, and hydraulic systems. The work is intended to ensure sustained operational readiness and technical accuracy across defense aviation platforms by providing expert engineering services that support lifecycle management and system performance. All activities must adhere to strict technical standards and are tied directly to the maintenance and enhancement of mission-critical military aviation hardware. The contract is structured as a subcontract under the Department of Defense and is classified under NAICS code 336411, which pertains to aircraft engine and engine parts manufacturing. It was posted on July 20, 2026, with a firm response deadline of August 20, 2026, at 8:30 PM Eastern Time. Although the solicitation number and specific point of contact are not provided, the place of performance and agency details indicate that the work is aligned with the Air Force Life Cycle Management Center. Participation is open under general subcontracting terms without a specified set-aside, and all proposals must be submitted through the official SAM.gov portal linked in the documentation.

Aircraft Manufacturing

POSTED

DEADLINE

Avionics and Electrical Systems Engineering SupportThe contract focuses on sustaining and modernizing critical avionics, flight control, communication, navigation, and electrical systems for defense platforms, with a strong emphasis on managing component obsolescence and integrating emerging technologies to maintain operational readiness. This effort involves engineering support to upgrade legacy systems, ensure long-term functionality, and enhance performance through the seamless incorporation of new capabilities without disrupting existing missions. The work is structured as a subcontract under the Department of Defense, categorized under NAICS code 334511 for aviation and missile systems manufacturing, and is scheduled for response by August 20, 2026. The agency responsible is FA8552 Aflcmc Wiu, with performance expected across unspecified locations tied to military aviation infrastructure. No set-aside provisions or detailed point of contact information are provided, and the contract is positioned within the broader context of defense system modernization across air platforms.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

DEADLINE

Engineering Support Services of the HH-60W Helicopter Platforms

Solicitation # FA8552-26-R-HH60W

The U.S. Air Force is conducting market research to identify potential sources capable of providing engineering and logistical support for the HH-60W helicopter platform, with Sikorsky Aircraft Corporation identified as the only anticipated sole source due to its exclusive access to proprietary data, technical expertise, and original equipment manufacturer knowledge required to maintain operational, safety, suitability, and effectiveness standards. The support includes access to structural and component data, drawings, qualification records, and analysis methods necessary for sustaining the HH-60W fleet, and contractors must supply all materials, tools, test equipment, and services while ensuring replacements meet or exceed original quality standards, including maintaining and calibrating equipment at their own or subcontractor facilities. No set-aside classifications apply, and the North American Industry Classification System code for this effort is 541330. This request for information is strictly for market research purposes and does not constitute a solicitation for proposals or an obligation for the government to award a contract; responses will not be treated as formal proposals nor compensated beyond potential inclusion as allowable costs under future contracts. Participation does not guarantee future contract opportunities, and respondents are not entitled to reimbursement for any expenses incurred. All correspondence must be directed to the designated primary and secondary points of contact, and submissions are due by August 20, 2026. The effort falls under the Department of Defense, managed by the Office at Robins Air Force Base, Georgia, with the solicitation number FA8552-26-R-HH60W, and no security or foreign participation requirements have been finalized.

Engineering Services

POSTED

DEADLINE

Program Management and Small Business Utilization SupportThe contract titled Program Management and Small Business Utilization Support requires the contractor to manage and track subcontractor activities, ensure accurate reporting of small business participation, and prepare Volume V submissions in compliance with federal requirements. Key responsibilities include maintaining and updating CAGE codes and detailed work descriptions to support contractual transparency and compliance. The effort is aligned with NAICS code 541611, indicating a focus on management consulting services supporting government program oversight. This subcontract opportunity is issued under the Department of Defense through the FA8552 Aflcmc Wiu office, with responses due by October 8, 2026, and posted on July 10, 2026, with no set-aside designation specified. There is no designated place of performance or point of contact listed, and the work is expected to be performed remotely or as needed to support federal reporting obligations.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Cybersecurity and CUI Compliance SupportThe contract provides ongoing cybersecurity support to ensure compliance with DFARS 252.204-7012 and NIST SP 800-171 requirements, focusing on the protection of controlled unclassified information and covered defense information. It encompasses a full suite of services including implementation and maintenance of safeguards, regular audits to verify adherence to standards, mandatory training programs for personnel, and robust incident reporting procedures to address potential breaches or exposures. The work is structured as a subcontract under the Department of Defense, with the North American Industry Classification System code 541512 indicating it relates to computer systems design and related services. Compliance activities must be sustained throughout the contract period to meet federal mandates for securing sensitive defense information. All performance is expected to align with the operational environment of the Department of Defense, ensuring that systems handling controlled unclassified information meet stringent security controls defined by NIST and mandated by DFARS. The solicitation was posted on July 10, 2026, with a response deadline of October 8, 2026, indicating an active procurement cycle aimed at securing qualified subcontractors. There is no specified set-aside designation or location restrictions outlined, but performance is anticipated to support DoD systems globally. The contract requires a strong understanding of defense cyber requirements, experience in continuous monitoring, and the ability to deliver timely incident response and documentation under strict federal oversight.

Computer Systems Design Services

POSTED

DEADLINE

Technical Documentation and Data Package ProductionThe contract calls for the production of comprehensive technical documentation including System Test Requirements Plan, Component Performance Metrics, Software Requirements Specification, and Software Design Description, all aligned with Contract Data Requirements List standards and Department of Defense guidelines. The deliverables must be submitted via the Web-based Application for Workflow and Funding system, ensuring compliance with federal contracting protocols and data management practices. All documentation is expected to meet precise technical and formatting requirements to support system validation and operational readiness under DoD protocols. This is a subcontract opportunity under the NAICS code 541611 for management, scientific, and technical consulting services, posted on July 10, 2026, with a response deadline of October 8, 2026. The contracting activity is managed by the FA8552 Aflcmc Wiu office within the Department of Defense, though no specific location for performance or point of contact is provided. The solicitation does not specify a set-aside designation, and interested parties must ensure full adherence to the required documentation deliverables as outlined in the CDRL requirements to be eligible for award.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Systems Integration and Test EngineeringThe contract involves the integration of DVES hardware and software onto the HH-60W platform, requiring comprehensive systems integration and test engineering to ensure full operational compatibility. This includes laboratory testing, ground-based evaluations, and flight testing to verify that all performance metrics meet the established Key Performance Parameters and Key System Attributes. The work demands rigorous validation across multiple environments to confirm system reliability, functionality, and readiness for operational deployment. The contract is classified as a subcontract under NAICS code 541330, issued by the Department of Defense through the FA8552 Aflcmc Wiu office. It was posted on July 10, 2026, with a response deadline of October 8, 2026. There is no set-aside designation specified, and the place of performance details are not provided. All technical deliverables must align with strict military standards, and successful execution will require close coordination between engineering teams, testing units, and operational stakeholders to ensure the integrated system delivers the required capabilities on schedule.

Engineering Services

POSTED

DEADLINE

Embedded Avionics Software DevelopmentThe contract entails the design and development of real-time embedded software for the HH-60W DVES, focusing on critical systems including sensor fusion, pilot interface logic, and diagnostic functionalities. The software must comply with stringent airworthiness and safety-critical standards to ensure operational reliability and mission readiness in high-stakes aviation environments. The work requires deep expertise in embedded systems, aviation-grade software engineering, and adherence to industry-specific certification protocols for safety-critical applications. This is a subcontract opportunity under the NAICS code 541715, issued by the Department of Defense through the FA8552 Aflcmc Wiu office. The solicitation was posted on July 10, 2026, with a firm deadline for responses on October 8, 2026. The place of performance and specific location details are not specified, but the work will support the HH-60W program, indicating a focus on U.S. military rotary-wing aircraft modernization efforts. There is no set-aside designation provided, and the contract is structured to be awarded to a subcontractor supporting a larger prime contractor or program initiative.

Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

DEADLINE