Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Airline Regulator Replacement

Active

State & Local

Response Deadline11/23/2026, 06:00:00 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the installation of pneumatic system components for prime contractors at an Army State Military Department facility located in Gadsden, Alabama. The scope of work requires the removal of four defective airline regulators and the installation of four new Wilkerson 1/2 inch regulators, or approved equivalents, to restore proper pneumatic line functionality. The contractor is expected to utilize standard mechanical and pneumatic plumbing tools to ensure the successful delivery of four fully installed and functioning regulators. The project is categorized under NAICS code 238220 and is managed by the Alabama Army MCA Real Property Operations and Maintenance agency. Interested parties must adhere to the response deadline of November 23, 2026. This effort focuses on critical infrastructure maintenance to ensure the operational efficiency of the facility's pneumatic systems.

General Info

Agency

Alabama → Army MCA_App 01_Real Property Operations & Maintenance, State Military Department

NAICS

238220 - Plumbing, Heating, and Air-Conditioning Contractors

Place of Performance

AL, USA

Set-Aside

NONE

Documents

This scope was carved out of SRC0000037488.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Annual Inspection/Maint. and Repair on Generator at FMS #8

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 30

subcontract

Response DeadlineNov 23

Submission deadline

Response Deadline

11/23/2026, 06:00:00 AM UTCin 23 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyAlabama → Army MCA_App 01_Real Property Operations & Maintenance, State Military Department

ContactsNo contacts available

OfficeN/A

Organization / AgencyAlabama → Army MCA_App 01_Real Property Operations & Maintenance, State Military Department

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Installs pneumatic system components for prime contractors on Army State Military Department facility projects in Gadsden, AL. Removes four defective airline regulators and installs four new Wilkerson 1/2 inch regulators or approved equivalents to ensure proper pneumatic line function. Requires standard mechanical and pneumatic plumbing tools. Delivers four installed and functioning 1/2 inch airline regulators.

Similar Contracts

Same NAICS industry code

Water Pump Replacement

Solicitation # water-pump-replacement

The Cassadaga Job Corps Center in New York is soliciting bids for a water pump replacement project at their Pump House. The scope of work involves removing existing end suction centrifugal pumps and check valves to install two new booster pumps equipped with variable speed drives and automatic tower fill valves. The project also requires the installation of a hydro pneumatic expansion tank, 3 inch Type L copper piping with sweat fittings, and fiberglass insulation on all piping, concluding with final testing and factory startup. This solicitation is set aside for small businesses, including certified Veteran Owned, Service-Disabled Veteran Owned, Women-Owned, and HUBZone small businesses. Interested parties must submit their responses by November 30, 2026. The primary point of contact for this opportunity is Derrick Dickerson.

Cassadaga Job Corps Center

POSTED

about 2 hours ago

DEADLINE

in about 1 month

CBP#9772 HVAC Air Handling Unit (AHU) and Ductwork Cleaning Services

Solicitation # CBP#9772

Management & Training Corporation (MTC) is seeking a subcontractor for solicitation CBP#9772 to provide comprehensive HVAC Air Handling Unit (AHU) and ductwork cleaning services at the Edison Job Corps Center in Edison, New Jersey. The project involves the cleaning and restoration of 12 AHUs and 28 heating and cooling coils serving the Kilmer and Edison dormitories to improve airflow and heat-transfer efficiency. The awarded contractor must provide all labor, equipment, and materials, including the installation of permanent access panels and the restoration of affected building finishes. The contract is a fixed-price, single lump sum agreement with an estimated value between $100,000 and $250,000, and work must be completed within 90 consecutive business days following the Notice to Proceed. Bids are due by November 17, 2026, and will be evaluated based on overall best value. A mandatory physical site visit and signature on the attendance roster are required prior to bid submission. For bids equal to or greater than $25,000, a bid bond of 20% is required, and the awarded contractor must provide Performance and Payment Bonds from a surety company with at least an A- rating. Compliance with Davis-Bacon prevailing wage determinations for Middlesex County and various FAR clauses regarding small business utilization, security, and labor standards is mandatory. Final acceptance is contingent upon the submission of post-cleaning photographs, completion checklists, operational verification records, and a final project completion report.

Edison Job Corps

POSTED

about 2 hours ago

DEADLINE

CBP7787 ED1 RM 123 HVAC Compressor Replacement

Solicitation # CBP7787 ED1 RM 123

Management & Training Corporation (MTC) is soliciting bids for a fixed-price, single lump sum subcontract to replace a failed HVAC/refrigeration compressor at the ED1 Building of the Sierra Nevada Job Corps Center in Reno, Nevada. The project requires the contractor to provide all labor, materials, equipment, and supervision to restore full cooling capacity and operational efficiency while adhering to EPA Section 608 regulations for refrigerant recovery. The estimated price range for this effort is between 0 and 25,000 dollars. Bids will be awarded based on overall best value, with MTC serving as the sole judge of responsiveness. To be eligible for award, bidders must complete a mandatory physical site visit and sign the attendance roster. For bids equal to or greater than 25,000 dollars, a bid bond guarantee of 20 percent of the base bid is required, and the awarded contractor must provide performance and payment bonds from a surety company with at least an A- rating. Additionally, contractors must obtain a Unique Entity Identifier (UEI) and submit an SF 1413 Statement and Acknowledgement form. The contract incorporates various Federal Acquisition Regulation (FAR) clauses, including those for the Buy American Act, Service Contract Labor Standards, and combating trafficking in persons. Insurance requirements include general liability coverage of at least 1,000,000 dollars and worker's compensation with employer's liability limits of at least 500,000 dollars. Final acceptance and payment are contingent upon a successful final inspection, the resolution of all claims or liens, and the submission of closeout documentation, including operation and maintenance manuals and certified payroll reports.

Sierra Nevada Job Corps Center

POSTED

about 2 hours ago

DEADLINE

MJCC Multiple HVAC Replacement System

Solicitation # mjcc-multiple-hvac-replacement-system

Education & Training Resources is seeking quotes for a subcontracting opportunity to provide turnkey replacement of multiple HVAC systems at the Montgomery Job Corps Center in Montgomery, Alabama. The scope of work involves the removal of existing equipment and the installation of new systems across several buildings, including units ranging from 3.5 to 10 tons in Buildings A, B, E, F, and G. Technical requirements include the use of R-454B refrigerant and adherence to the National Electrical Code, NFPA Standard No. 101, and OSHA regulations. The project requires a 5 to 10 year warranty on equipment parts and a 2 year warranty on workmanship. Interested bidders must be registered in SAM.gov with a Unique Entity ID and provide Alabama licensing, certificates of insurance, a W-9, and a completed bid sheet with a detailed cost breakdown and proposed schedule. This solicitation is set aside for small businesses, including VOSB, SDVOSB, WOSB, and HUBZone certifications. Compliance with the Davis-Bacon Act for prevailing wages and various FAR clauses regarding debarment and the Service Contract Act is mandatory. Bonding requirements are tiered based on project value, with 100 percent payment bonds required for projects over 35,000 dollars and both performance and payment bonds required for projects exceeding 150,000 dollars. Bids are due by November 27, 2026, at 12:00 PM CST.

Montgomery Job Corps Center

POSTED

about 2 hours ago

DEADLINE

ACT-0124-00 BNATCS: Installation of two (2) existing Chillers Bldg. 366 at the Willima J. Hughes Technical Center, Atlantic City, NJ

Solicitation # act-0124-00-bnatcs-installation-two-2-existing-chillers-bldg-366-willima-j-hughes-technical-center

This contract involves the installation of two existing chillers at Building 366 of the William J. Hughes Technical Center in Atlantic City, New Jersey. The scope of work encompasses the necessary electrical power setup, control interface connections, chilled water piping, and final start-up procedures. The project is managed by PTSI Managed Services Inc. and is categorized under NAICS codes 238210, 238220, and 238290. The estimated magnitude of construction for this project is between 250,000 and 500,000 dollars. This is a solicitation set aside for small businesses, including certified Veteran Owned, Service-Disabled Veteran Owned, Women-Owned, and HUBZone small businesses. Interested parties must submit their responses by the deadline of November 18, 2026.

PTSI Managed Services Inc.

POSTED

about 2 hours ago

DEADLINE

Centennial Dry Sprinkler System & Compressor Replacement Services

Solicitation # centennial-dry-sprinkler-system-compressor-replacement-services

Management & Training Corporation (MTC) is soliciting bids for a fixed-price, single lump sum subcontract to provide dry-type sprinkler system and compressor replacement services at the Centennial Job Corps Center in Nampa, Idaho. The project aims to eliminate severe piping leaks and prevent equipment wear caused by air compressor short-cycling in Building CM (Men's Dormitory), Building CW (Women's Dormitory), and Building D (Recreation). The scope of work includes the demolition and removal of existing distribution piping and compressors, installation of new equipment sized per NFPA standards, and rigorous operational and leak testing. All work must be completed within 30 consecutive business days following a written Notice to Proceed and must adhere to NFPA 25 (2023 Edition) and all local, state, and national codes. Bids are due by December 1, 2026, and must be submitted via email to Sandra Clore. A mandatory physical site visit and signature on the attendance roster are required prior to bid submission. Bidders must be certified to provide services in the State of Idaho and provide a detailed cost breakout. For bids equal to or greater than $25,000, a bid bond guarantee of 20% of the base bid is required, and the awarded contractor must provide performance and payment bonds from an A-rated surety company. Award decisions will be based on overall best value and bidder responsiveness. The contract is subject to various federal regulations, including the Davis-Bacon Act and associated wage determinations for building construction in Canyon and Gem Counties, Idaho. Contractors must comply with FAR clauses regarding whistleblower rights, security requirements, and the Buy American Act. Payment is contingent upon the submission of weekly certified payroll reports, and final payment requires a Notice of Final Completion, a certificate of release of liens, and the delivery of two sets of operation and maintenance manuals. This opportunity is set aside for HUBZone, Woman-owned, and Service-Disabled Veteran-owned small businesses.

Management & Training Corporation/Centennial Job Corps Center

POSTED

about 2 hours ago

DEADLINE

in about 1 month

Dorm Hot Water Tank Replacement – Glenmont Job Corps Center – S26-006

Solicitation # S26-006

Adams and Associates, Inc. is seeking qualified mechanical and plumbing contractors for solicitation S26-006 to replace domestic hot water storage tanks and associated equipment at the Glenmont Job Corps Center in Glenmont, New York. This subcontracting opportunity involves the removal and disposal of four 505-gallon tanks and the installation of four new 500-gallon insulated storage tanks, four heat exchangers, and one bronze Bell and Gossett circulator pump in the North Dormitory. The scope of work includes all necessary piping modifications using ProPress materials, electrical disconnections and reconnections, insulation, rigging, and the provision of a temporary hot water heater to ensure the facility remains operational during the estimated 2.5 to 3 week construction period. Proposals are due by November 9, 2026, at 4:00 PM ET, following a site walkthrough on October 29, 2026. Award decisions will be based on a weighted evaluation of price (60 percent), quality (20 percent), past performance (10 percent), and schedule (10 percent), meaning the lowest price does not guarantee selection. Contractors must comply with New York State statutory insurance requirements, Davis-Bacon prevailing wage determinations, and strict site security protocols, including a prohibition on fraternization with students. Required submission documents include a current W-9, vendor questionnaire with UEI and NAICS code, New York State licenses, and certificates of insurance. Payment terms are Net 30 days upon completion and receipt of invoice.

Adams and Associates, Inc.

POSTED

about 2 hours ago

DEADLINE

Roswell JCC – Male Dormitory Bldg. Water Source Heat Pump Replacement (20 units)

Solicitation # roswell-jcc-male-dormitory-bldg-water-source-heat-pump-replacement-20-units

The Career Systems Development Corporation is soliciting proposals for the total replacement of twenty failed ceiling-mounted water source heat pumps at the Roswell Job Corps Center Male Dormitory Building 558 in New Mexico. The scope of work includes the removal and off-site disposal of the damaged units and the installation of twenty new Bosch 1-ton units or an equivalent model. This installation must encompass all necessary ducting, electrical work, thermostat wiring, flexible hoses, and pressure valves. Additionally, the contractor must perform critical safety upgrades by installing smoke dampers with fusible links in all vents leading into the plenum, ensuring all materials used in the plenum are plenum rated. All work must comply with NFPA 101, NFPA 70, and all applicable plumbing, mechanical, and building codes. This project is subject to the Davis Bacon Act Wage Determination NM20260014, requiring the submission and approval of weekly certified payroll reports prior to the payment of any invoices. Proposals exceeding 100,000 dollars will require payment and performance bonding for 100 percent of the contract value upon award. Qualified contractors must be licensed, certified, and insured. Proposals are due by November 7, 2026, and must include a technical approach for safe completion, a detailed cost breakdown for labor and materials, equipment cut sheets, warranty information, and a requested payment schedule. Upon project completion, the contractor is required to provide operation manuals to the Facility Manager.

Career Systems Development Corporation

POSTED

about 2 hours ago

DEADLINE

Exeter Job Corps Boiler Room Pump Replacement

Solicitation # exeter-job-corps-boiler-room-pump-replacement

The Exeter Job Corps is seeking a qualified contractor for the replacement of boiler room pump number two. The project requires the installation of a new TACO pump model TACF1511, along with the integration of new valves, fittings, gauges, and thermo-wells. Work will be performed in Rhode Island under NAICS code 238220. Eligible bidders must be licensed, insured, and maintain an active UEI registration. This solicitation is set aside for small businesses, including certified Veteran Owned, Service-Disabled Veteran Owned, Women-Owned, and HUBZone small businesses. Interested parties must submit their responses by November 6, 2026.

Exeter Job Corps

POSTED

about 2 hours ago

DEADLINE

WOJC – Buried Domestic Hot Water (DHW) Pipe Repair

Solicitation # wojc-buried-domestic-hot-water-dhw-pipe-repair-0

Education & Training Resources is seeking quotes for a subcontracting opportunity to repair buried domestic hot water piping at the Westover Job Corps Center in Chicopee, Massachusetts. The scope of work involves providing all labor, materials, and equipment to excavate approximately 15 linear feet of trench to a depth of 8 feet, repair up to 10 linear feet of damaged pipe with diameters up to 4 inches, and install insulation on the new piping. These services are required at two specific locations: behind Singletary Hall and on the east side of Harris Hall. The project requires a one-year equipment and workmanship warranty, and final payment is contingent upon a signed punch list and final inspection. Interested bidders must submit their proposals by November 6, 2026, at 4:00 PM. Required documentation includes a completed bid sheet with a detailed cost breakdown, a proposed service schedule, Massachusetts licensing, certificates of insurance, a W-9, and an active SAM.gov registration with a Unique Entity ID. This opportunity is set aside for small businesses, including VOSB, SDVOSB, WOSB, and HUBZone certifications. Award selection is at the sole discretion of ETR and is not based solely on the lowest bid. Contractors must comply with federal and state prevailing wage laws, including the Davis-Bacon Act, and adhere to OSHA and NFPA safety standards. Bonding requirements apply for projects exceeding 35,000 dollars.

Westover Job Corps Center

POSTED

about 2 hours ago

DEADLINE

DETROIT JCC-2026-41 – PLUMBING, HEATING, COOLING & ELECTRICAL

Solicitation # detroit-jcc-2026-41-plumbing-heating-cooling-electrical

Serrato Corporation is seeking a licensed contractor to provide ongoing plumbing, heating, cooling, and electrical services for the Detroit Job Corps located at 11801 Woodrow Wilson in Detroit, Michigan. This solicitation, identified as detroit-jcc-2026-41-plumbing-heating-cooling-electrical, falls under NAICS code 238220 and is specifically set aside for small businesses, including certified veteran-owned, service-disabled veteran-owned, women-owned, and HUBZone small businesses. Interested parties must submit their responses by the deadline of May 31, 2027. The primary point of contact for this opportunity is Toni Robinson. This contract ensures the continued maintenance and operational efficiency of the facility's essential mechanical and electrical systems.

Serrato Corporation

POSTED

about 2 hours ago

DEADLINE

CBP6729 Cafeteria Dishwasher Replacement

Solicitation # CBP6729

Management & Training Corporation (MTC) is soliciting bids for a fixed-price, single lump sum subcontract to replace the cafeteria dishwashing system at the San Diego Job Corps Center in Imperial Beach, California. The project involves the removal and disposal of an existing Stero STPCW-ER-20 dishwasher and the installation of a new commercial-grade conveyor system capable of supporting meal service for 600 people, three times daily, seven days a week. The estimated contract value ranges from $25,000 to $100,000. Bidders must conduct a mandatory physical site visit and submit their proposals by November 9, 2026. Award decisions will be based on overall best value. Required submission documents include the MTC Bid for Lump Sum Contract form, a detailed bid breakout, and a completed supplier onboarding packet. For bids equal to or greater than $25,000, a bid bond of 20% of the base bid is required, and the awarded contractor must provide performance and payment bonds from a surety with at least an A- rating. The project is subject to Construction Wage Rate Requirements (Davis-Bacon Act), requiring compliance with prevailing wage rates for San Diego County. Additionally, the contract incorporates various Federal Acquisition Regulation (FAR) clauses regarding small business utilization, security requirements, and the Buy American Act. Payment is subject to a 10% retainage until substantial completion and final acceptance by center staff.

San Diego Job Corps Center

POSTED

about 2 hours ago

DEADLINE

More opportunities from Alabama → Army MCA_App 01_Real Property Operations & Maintenance, State Military Department

Same awarding agency

Air Compressor Filters and Mats SupplyThis subcontract involves the supply of filtration components for prime contractors working on Army State Military Department facility projects in Alabama. The scope of work requires the provision of manufacturer-specified filters and cabinet filter mats specifically compatible with Speed Air Model 1WD44 compressors. The selected provider must be capable of delivering either original equipment manufacturer parts or certified equivalents directly to the designated project site. The opportunity is categorized under NAICS code 423840 and was posted on October 30, 2026. Interested parties must submit their responses by the deadline of November 23, 2026. This procurement is managed through the Alabama State Military Department's Real Property Operations and Maintenance division.

Industrial Supplies Merchant Wholesalers

POSTED

about 5 hours ago

DEADLINE

Speed Air Compressor Technical ServiceThis subcontract involves providing specialized maintenance and repair services for a Speed Air air compressor, model 1WD44, located at FMS 8 in Gadsden, Alabama. The work is performed on behalf of prime contractors for the Army State Military Department's Real Property Operations and Maintenance agency in Alabama. The scope of work includes replacing belts, installing oil and thermostatic valve repair kits, and conducting oil sampling for analysis. The contractor is required to utilize Speed Air specific repair kits and professional oil sampling equipment to ensure the compressor is returned to fully operational status. Final deliverables include a functioning unit and a detailed oil sample report. The solicitation was posted on October 30, 2026, with a response deadline of November 23, 2026, under NAICS code 333912.

Air and Gas Compressor Manufacturing

POSTED

about 5 hours ago

DEADLINE

Annual Inspection/Maint. and Repair on Generator at FMS #8

Solicitation # SRC0000037488

Solicitation SRC0000037488 is for the annual inspection, maintenance, and repair of a Speed Air air compressor (Model 1WD44, SN: D063475) at FMS #8 in Gadsden, Alabama. The scope of work includes replacing belts, collecting oil samples, and installing filters, cabinet filter mats, and repair kits for the oil and thermostatic valves. A mandatory site visit is required on November 18, 2026, at 10:00 AM at 5319 Airport Road, Gadsden, Alabama. The response deadline is November 23, 2026, and all bids must be submitted electronically through the Alabama Buys portal. The contract is managed by the Army MCA and the State of Alabama, with a maximum total value of 25,000 dollars over a potential five-year period, subject to annual renewals. Award evaluation will be based on price reasonableness, cost realism, and supplier qualifications, including professional licenses and insurance. Vendors must comply with the Code of Alabama, including the Beason-Hammon Alabama Taxpayer and Citizen Protection Act and registration requirements for foreign corporations. Payment will be handled electronically via P-cards, EFT, or state-issued credit cards. Final acceptance of services is contingent upon a satisfactory inspection by the State of Alabama in accordance with the Universal Commerce Code.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

about 5 hours ago

DEADLINE

Overhead Door Replacement Parts SupplierThis subcontract opportunity is for a supplier to provide genuine Overhead Door brand or approved equivalent replacement parts for industrial roll-up doors measuring 12 by 14 feet. The project supports prime contractors working on Army State Military Department facility projects located at Fort Whiting in Alabama. The scope of work includes providing components for both motor and manual operation systems, along with detailed technical specifications for any equivalent parts used. The selected supplier is responsible for delivering all replacement parts and technical documentation directly to the site or the prime contractor. This opportunity is categorized under NAICS code 423810 and was posted on October 30, 2026, with a response deadline of November 11, 2026.

Construction and Mining (except Oil Well) Machinery and Equipment Merchant Wholesalers

POSTED

about 5 hours ago

DEADLINE

Commercial Roll-Up Door Repair ServicesThis subcontract for Commercial Roll-Up Door Repair Services involves the repair and restoration of a non-operational 12 by 14 foot roll-up door at a State Military Department facility located at Fort Whiting. The selected contractor will be responsible for diagnosing and repairing both motorized and manual operation systems to ensure a full range of motion in compliance with the International Building Code. The scope of work includes the delivery of a fully operational door and the removal of all associated debris from the property. This opportunity is categorized under NAICS code 238290 and is managed by the Alabama Army MCA Real Property Operations and Maintenance office, with a response deadline of November 11, 2026.

Other Building Equipment Contractors

POSTED

about 5 hours ago

DEADLINE

Roll Up Door Repairs at Fort Whiting, Mobile

Solicitation # SRC0000037487

Solicitation SRC0000037487 is a fixed-price purchase order for the repair of a non-operational 12 by 14 foot overhead roll-up door located on the north side of the Battle Space Surveillance Company work bay at the Fort Whiting USMC Maintenance Facility in Mobile, Alabama. The door is currently stuck twelve inches above floor level with both the motor and manual systems inoperable. All work must meet or exceed International Building Code requirements and manufacturer specifications. The contractor is responsible for all travel, labor, materials, and special equipment, and must remove all debris from the property as the use of facility dumpsters is prohibited. A mandatory site visit is required for all bidders on Friday, November 6, 2026, at 9:00 AM at 1630 South Broad Street, Mobile, AL. Responses must be submitted electronically through the Alabama Buys portal by November 11, 2026. The contract has a not-to-exceed total value of 25,000 dollars. Award evaluation may include cost realism and price reasonableness, and the state may request professional licenses, certificates of insurance, or manufacturer authorizations after the bid opening. The agreement is subject to Alabama state law, including sales tax exemptions and specific dispute resolution through the Board of Adjustment of the State of Alabama.

All Other Specialty Trade Contractors

POSTED

about 5 hours ago

DEADLINE

Commercial Push Bar Hardware SupplierThis subcontract opportunity is for a supplier to provide commercial-grade push bar and panic hardware mechanisms for Army National Guard facility projects. The specific scope of work involves sourcing and delivering hardware compatible with a USAR Supply Cage vault area door for the JFHQ/SMD located in Montgomery, Alabama. The procurement is managed under NAICS code 423710 for the Alabama State Military Department. Interested parties must submit their responses by the deadline of November 23, 2026, to support the prime contractors overseeing these real property operations and maintenance efforts.

Hardware Merchant Wholesalers

POSTED

about 6 hours ago

DEADLINE

Commercial Door Push Bar ReplacementThis subcontract involves the removal and installation of a commercial push bar door mechanism at the Army National Guard JFHQ/SMD facility in Montgomery, Alabama. The scope of work specifically requires the removal of a broken mechanism located in the downstairs basement USAR Supply Cage vault area and the installation of a new replacement. The contractor is responsible for testing the hardware to ensure normal entry and exit functionality, ultimately delivering a fully restored and operational door mechanism. The project is categorized under NAICS code 238990 and is managed through the Alabama State Military Department's Real Property Operations and Maintenance agency. Interested parties must adhere to the response deadline of November 23, 2026. This effort supports prime contractors overseeing facility projects to maintain secure and functional access within the military installation.

All Other Specialty Trade Contractors

POSTED

about 6 hours ago

DEADLINE

Push Bar Replacement on Door at JFHQ/SMD

Solicitation # SRC0000037485

Solicitation SRC0000037485 is a request for a vendor to replace a broken push bar door mechanism at the Joint Force Headquarters located at 1720 Congressman William L Dickinson Dr, Montgomery, Alabama, specifically for the downstairs basement of the USAR Supply Cage vault area. The selected vendor is responsible for providing all necessary labor and materials to restore the door to normal entry and exit functionality and must perform a final cleanup upon completion. The contract is administered by the State of Alabama and may be renewed annually for up to five years, with a total contract cost ceiling of 25,000 dollars. The State of Alabama will evaluate bids based on pricing, cost realism, and price reasonableness, and may request professional licenses, certificates of insurance, or manufacturer reseller authorizations following the bid opening. Vendors must submit responses electronically through Alabama Buys and certify compliance with Alabama tax laws, non-collusion agreements, and debarment regulations. Payment will be made via electronic methods, including state-issued credit cards, P-cards, or EFT. Final acceptance of the work is subject to a satisfactory inspection by the State in accordance with the Universal Commerce Code of Alabama.

POSTED

about 6 hours ago

DEADLINE

McQuay Chiller Replacement Compressors SupplyThis subcontract involves the procurement and delivery of two replacement compressors and corresponding installation kits for the Army State Military Department in Montgomery, Alabama. The equipment must be compatible with McQuay Model AGZ130CHHNN-E, with a preference for OEM certification or authorization. The selected provider will supply either new or refurbished units to be delivered directly to the 187th Fighter Wing site. The opportunity is categorized under NAICS code 423450 and is managed through the Alabama State Military Department's Real Property Operations and Maintenance office. Interested parties must submit their responses by the deadline of November 17, 2026.

Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

DEADLINE

McQuay Chiller Compressor Replacement and System RestorationThis subcontract involves the mechanical repair and restoration of a McQuay Chiller located at an Army State Military Department facility in Montgomery, Alabama. The scope of work focuses on restoring Circuit 1 by removing and replacing two defective compressors, correcting minor system issues, and conducting comprehensive testing and commissioning to ensure the unit is fully operational. To qualify for this project, contractors must hold a valid Alabama HVAC/R License and EPA Section 608 Certification. The project is categorized under NAICS code 238220, with a response deadline set for November 17, 2026.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

McQuay Chiller Repair for 187th FW BLDG 1501

Solicitation # SRC0000037470

Solicitation SRC0000037470 is a request for the repair of a McQuay Chiller (Model AGZ130CHHNN-E, Serial STNU071200080) located at the 187th Fighter Wing, Building 1501 in Montgomery, Alabama. The primary objective is to restore Circuit 1 by replacing two defective compressors, which includes recovering refrigerant from the circuit, recharging the system upon completion, and disposing of the old compressors. A mandatory site visit is scheduled for November 10, 2026, at 1:00 PM at 5187 Selma Hwy, Montgomery, AL. Responses must be submitted electronically through the Alabama Buys portal by November 17, 2026. The contract is governed by the Department of Finance Administrative Code and is subject to a not-to-exceed total value of 25,000 dollars. The term may be renewed annually for up to five years, provided the total cost does not exceed the 25,000 dollar limit. Key compliance requirements include E-Verify enrollment for Alabama employers, registration with the Alabama Secretary of State for foreign entities, and a mandatory disclosure statement for contracts exceeding 25,000 dollars. The State of Alabama is exempt from paying sales tax, and the contractor is prohibited from seeking indemnification from the State. Payment will be made via electronic methods, including state-issued credit cards, P-cards, or EFT.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS