This Solicitation opportunity from Department Of Defense was posted on June 23, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Albeni Falls Dam (AFD) CO2 Cylinder Hydrostatic Testing - Amendment 1

Closed

W912DW26QA036Federal

Submission Closed06/29/2026, 06:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 811310

New

Kubota M8200 Clutch Replacement

Solicitation # kubota-m8200-clutch-replacement

Management & Training Corporation is soliciting bids for the clutch replacement of a Kubota M8200 tractor with front wheel assist, no cab or loader, located at the Earle C. Clements Job Corps Center in Morganfield, Kentucky. The contractor is responsible for providing all transportation, labor, supervision, tools, and new manufacturer-specified parts to diagnose and repair the clutch assembly and power take-off system. Key technical requirements include replacing friction discs, bearings, oil seals, and O-rings, as well as resurfacing the flywheel and replacing hydraulic pipes and filters as necessary. Final acceptance is contingent upon the Facility Maintenance Department verifying proper clutch engagement and PTO operation under load. This is a fee-for-service contract awarded on a best-value basis, with a response deadline of November 3, 2026. The solicitation is set aside for small businesses, including VOSB, SDVOSB, WOSB, and HUBZone certifications. Applicants must submit a bid sheet, proof of insurance, a completed supplier packet including Form W-9, and a self-certification form. The contract is subject to various Federal Acquisition Regulations, including Service Contract Labor Standards under Wage Determination 2015-4687 Revision 31 for Kentucky, and strict requirements regarding the security of non-public information and the prevention of trafficking in persons.

Earle C. Clements Job Corps Center

POSTED

DEADLINE

Bus Fire Suppression System Maintenance

Solicitation # WMATA-0000010906

The Washington Metropolitan Area Transit Authority is seeking proposals for the maintenance of bus fire suppression systems under solicitation number WMATA-0000010906. This procurement falls under NAICS code 811310 and is managed through the agency's Virginia operations. The solicitation was posted on October 27, 2026, and requires all responses to be submitted by the deadline of November 4, 2026. Interested parties can access further details and manage their bids through the official WMATA supplier portal.

Washington Metropolitan Area Transit Authority

POSTED

DEADLINE

ANNUAL ROTATING EQUIPMENT INSPECTION, TESTING, REPAIR, RECONDITIONING AND STORAGE SERVICES

Solicitation # 2026-RFP-130

Lakeland Electric is soliciting proposals under RFP 2026-RFP-130 to establish a pool of qualified contractors for the annual inspection, testing, repair, reconditioning, and storage of critical rotating equipment at the McIntosh and Larsen Power Plants. The scope of work covers a wide range of assets, including low- and medium-voltage AC/DC electric motors and circulating water and condensate pumps. Required services include clean inspection tests, troubleshooting, motor rewinding, dynamic field balancing, laser alignment, and vibration analysis. Additionally, the selected contractors must provide logistics support, including pickup, delivery, and secure indoor storage with ongoing preservation activities such as shaft rotation and lubrication. Proposals are due by 3:00 pm on October 30, 2026, via the OpenGov portal. Award decisions will be based on a 100-point scoring system evaluating pricing (30%), qualifications and experience (25%), technical and facility capabilities (25%), service approach and response (15%), and past performance (5%). Mandatory submittals include a signed W-9, Florida Sunbiz registration, a notarized Hold Harmless Indemnification Agreement, and a Human Trafficking Affidavit. Contractors must adhere to strict safety standards, including OSHA regulations for crane operations and powered industrial trucks, and must certify compliance with drug-free workplace and suspension and debarment regulations.

LE - Production - MPP

POSTED

DEADLINE

Airport Baggage Handling System

Solicitation # PUR-RFP2026.08.10068

The City of San Jose is seeking responses from qualified vendors for an Airport Baggage Handling System under solicitation number PUR-RFP2026.08.10068. All proposals must be submitted electronically via Biddingo by December 4, 2026, at 12:00 PM PT. The contract will be awarded based on a best value evaluation rather than price alone, and preference may be given to Local and Small Business Enterprises that maintain an office in Santa Clara County and hold a valid City of San Jose Business Tax Certificate. Vendors are instructed to exclude sales tax from their initial responses, as the city will determine the applicable tax upon award. It is important to note that any quantities provided in the solicitation are estimates and are not guaranteed, meaning variations in volume will not justify adjustments to unit pricing or rates. Further details and required documentation are available through the official solicitation documents and the Biddingo platform.

City of San José - Purchasing

POSTED

DEADLINE

Laboratory Instrument Installation and Calibration

NASA Shared Services Center

POSTED

DEADLINE

Inspection, Testing, and Repair of Rosemount Model 6888 Oxygen Sensors

260-NETWORK Contract Office 20 (36C260)

POSTED

DEADLINE

Specialized NDT (Non-Destructive Testing) ServicesThis small business set-aside subcontract involves providing specialized non-destructive testing services for Department of the Army UH-60 helicopter projects. The contractor is responsible for detecting cracks, corrosion, and catastrophic damage using ultrasonic equipment and inspection kits through methods such as X-ray, Magnetic Particle, and Dye Penetrant testing. All work must be performed by personnel holding NAS410 or equivalent certification to ensure the delivery of accurate inspection reports and airworthiness certifications. Managed by the Department of Defense under agency W6QK Acc-Rsa, the opportunity falls under NAICS code 811310. Interested parties must submit their responses by the deadline of December 1, 2026.

POSTED

DEADLINE

Radiator Core & Heat Exchanger RepairThis small business set-aside subcontract, managed by the Department of Defense agency W6QK Acc-Rsa, involves specialized repair, cleaning, and refurbishment of radiator cores and heat exchanger elements. The work supports prime contractors on Department of the Army UH-60 helicopter projects to ensure components meet continued airworthiness standards. Technical requirements include chemical cleaning, pressure leak testing using specialized rigs, brazing, soldering, and fin straightening. The opportunity is categorized under NAICS code 811310 and was posted on October 27, 2026, with a response deadline of December 1, 2026. The selected contractor will be responsible for utilizing industrial cleaning solvents and pressure testing equipment to deliver fully refurbished heat exchangers and radiator cores.

POSTED

DEADLINE

Preventative Maintenance and Repairs

Solicitation # W911KF27QA006

This sole source procurement, solicitation number W911KF27QA006, is awarded to Phillips Corporation for the provision of preventive maintenance and repair services for Haas Computer Numerical Controlled machines. The work will be performed at the Anniston Army Depot in Alabama under the Department of Defense. The presolicitation was posted on October 22, 2026, with a response deadline of December 3, 2026. While this specific action is sole sourced, other organizations possessing the required capabilities may submit written evidence to the contracting officer to be considered for future procurement opportunities.

POSTED

DEADLINE

Material Handling Equipment (MHE) Repair Services

Solicitation # N0018927QL011

Navsup Flt Logistics Ctr Norfolk

POSTED

DEADLINE

Combined Synopsis/Solicitation Notice: Maintenance of Commissary Refrigeration Systems and Repair of Refrigeration, Heating, Ventilation, and Air Conditioning Systems (HVAC) at Hario and Sasebo, Japan

Solicitation # W912HV26QA013

Solicitation W912HV26QA013 is a combined synopsis and request for quote for a firm-fixed-price contract to provide maintenance and repair services for commissary refrigeration systems, including Refrigeration Monitoring and Control Systems (RMCS), and heating, ventilation, and air conditioning (HVAC) systems. The work will be performed at the Hario Commissary (Building 5127), Sasebo Commissary (Building 1436), and Sasebo Storage Facility (Building 306) in Japan. The contract includes a base period from December 1, 2026, through November 30, 2027, with the option for four additional extension years. The contractor is required to provide monthly preventive maintenance and maintain 24/7 emergency service availability, with a two-hour response time and a 24-hour repair completion window. Replacement parts under 500,000 JPY are included in the base price, while those exceeding this amount are handled via reimbursable CLINs with a not-to-exceed limit of 3,000,000 JPY per period. Award will be based on the most advantageous quotation, evaluated in order of past performance (Acceptable/Unacceptable), technical capability (Good/Acceptable/Unacceptable), and price fairness and reasonableness. Quotations must be submitted electronically via the PIEE Solicitation Module by October 28, 2026. Required submissions include a technical narrative addressing emergency response and supply chain capabilities, financial documentation such as Standard Form 1407 and corporate tax returns, and at least three past performance questionnaires or CPARS evaluations. This acquisition is not set aside for small business concerns and requires compliance with OSHA and USACE safety standards.

POSTED

DEADLINE

Equipment Operations, Maintenance, and Repair Services at Joint Base Pearl harbor Hickam, Hawaii (JBPHH).

Solicitation # N6247827R2535

Solicitation N6247827R2535 is a Request for Proposal issued by NAVFAC Systems Command Hawaii for equipment operations, maintenance, and repair services at Joint Base Pearl Harbor Hickam, Hawaii. This Indefinite Delivery Indefinite Quantity (IDIQ) contract is a total small business set-aside, specifically open to HUBZone and Economically Disadvantaged Women-Owned Small Business entities under NAICS code 811310. The scope of work involves the calibration, maintenance, and repair of various systems, including boilers, unfired pressure vessels, wastewater instrumentation, autoclaves, and auxiliary generators. The contract is structured with a base period and four option periods, running from March 1, 2027, to September 1, 2032, and consists of both recurring preventive maintenance and non-recurring unit priced labor. The government will utilize the Lowest Price Technically Acceptable (LPTA) process for award, evaluating proposals based on total price and non-price factors including corporate experience, qualifications, safety, and past performance. To be eligible, offerors must achieve an acceptable rating in all non-price factors. Key requirements include the provision of a Project Manager with at least three years of relevant experience, a Site Safety and Health Officer, and an Environmental/Energy Manager. All technical work must be performed by personnel trained and certified by the Original Equipment Manufacturer. Proposals must be submitted via the Procurement Integrated Enterprise Environment (PIEE) by December 8, 2026, and must include a comprehensive Quality Management Plan and specific safety data, including DART and TCR rates from 2020 to 2024.

Navfacsyscom Hawaii

POSTED

about 13 hours ago

DEADLINE

in about 1 month

AI Contract Overview

The contract covers the inspection, hydrostatic testing, recertification, repair, replacement, transportation, and refilling of high-pressure carbon dioxide cylinders used in the fire suppression systems at Albeni Falls Dam in Oldtown, Idaho. A minimum of 48 and up to 62 cylinders are to be serviced under this firm-fixed-price contract, with all work required to comply strictly with Title 49 CFR 180.205 and other applicable Department of Transportation regulations. The contractor must perform all services including safe discharge and reclamation of CO2, internal and external visual inspections for defects such as corrosion, dents, and thread damage, hydrostatic testing at specified pressures, measurement of expansion, and proper recertification labeling. All serviceable cylinders must be refilled to manufacturer specifications and returned to the dam’s powerhouse entrance, with pickup and delivery limited to Mondays through Thursdays between 7:00 a.m. and 3:30 p.m. local time, excluding weekends and federal holidays. The base line item, CLIN 0001, includes transport, evaluation, testing, reporting, and refilling of all cylinders, with an As-Found Inspection Report required prior to any additional work. This report must detail each cylinder’s condition, test results, valve status, and repair or replacement recommendations with estimated costs. No repairs or replacements—including valve rebuilds (CLIN 0002), valve replacements (CLIN 0003), full cylinder assembly replacements (CLIN 0004), or cylinder-only replacements (CLIN 0005)—may proceed without written government authorization. Optional CLINs have not-to-exceed prices of $20,000 per unit and are contingent on the findings of the preliminary inspection. All new cylinders and assemblies must meet DOT and manufacturer standards, include required markings and protective caps, and be secured with proper transportation restraints. The U.S. Army Corps of Engineers retains the right to inspect cylinders before release and upon return, verifying proper documentation, recertification marks, physical condition, and valve installation. The contract is a total small business set-aside with a performance period running through August 31, 2026, and all invoicing must be submitted electronically through the Wide Area WorkFlow system. Payment and technical oversight are managed by designated Corps personnel, and contractor access is restricted to public areas at the dam with no security clearance required.

General Info

Inspection, testing, recertification, and transport of 48-62 CO2 cylinders for Albeni Falls Dam fire suppression.

Agency

Department Of Defense → W071 Endist Seattle

NAICS

811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

Place of Performance

Oldtown, ID, 83822, USA

Set-Aside

SBA

Documents

26QA036 Revised SOW for CO2 Cylinder Hydrostatic Testing at Albeni Falls Dam

sow

High

A.02 AFD CO2 Cylinder Testing SOW QASP 31March2026 UPDATED

sow

High

Amendment 0001 to Solicitation W912DW26QA036 for AFD CO2 Hydrostatic Cylinder Testing

amendment

High

RFQ W912DW26QA036 - AFD CO2 Cylinder Hydrostatic Testing

rfq

High

Kidde+HPCO2+Cylinder+System+TDSs.pdf

AI Contract Breakdown

Uniform Contract Format

Timeline

1 update

PhaseClosed

PostedApr 2

Solicitation

Notice updatedJun 23

Response deadline changed from Apr 13, 2026 to Jun 29, 2026. The notice title changed. The notice description changed.

Response DeadlineJun 29

Deadline has passed

Submission Closed

06/29/2026, 06:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → W071 Endist Seattle

Contacts2 people available

OfficeSEATTLE, WA, 98134-2329, USA

Organization / AgencyDepartment Of Defense → W071 Endist Seattle

Office AddressSEATTLE, WA, 98134-2329, USA

Contacts

Della S. Overton

contact@example.gov

+1 (555) 000-0000

Alex R. Marcinkiewicz

contact@example.gov

+1 (555) 000-0000

Full Description

UPDATED Scope of Work
CO2 Cylinder Inspection, Hydrostatic Testing, and Recertification Albeni Falls Dam | Seattle
U.S. Army Corps of Engineers

1. General
The purpose of this contract is to provide inspection, hydrostatic testing, recertification, repair, replacement, transportation, and refilling services for high-pressure carbon dioxide (CO2) cylinders utilized in the fire suppression systems at Albeni Falls Dam (AFD).

The Contractor shall furnish all labor, supervision, materials, equipment, transportation, permits, and incidentals necessary to perform the services specified herein.

2. Description of Services
The Contractor shall provide pickup, transportation, inspection, hydrostatic testing, recertification, repair, replacement, refilling, and return delivery of CO2 cylinders and associated valves in accordance with applicable federal regulations and industry standards.
All cylinder inspections, testing, and recertification activities shall comply with the requirements of Title 49, Code of Federal Regulations (CFR), Section 180.205, Requalification of Specification Cylinders, and all other applicable Department of Transportation (DOT) regulations.

3. Contract Type
Firm-Fixed-Price (FFP) with separately priced Contract Line-Item Numbers (CLINs) for repair and replacement actions, as approved by the Government.

4. Background
The CO2 cylinders covered under this contract provide fire suppression protection for electrical power generation equipment at Albeni Falls Dam. The fire suppression system consists of forty-eight (48) active 75-pound CO2 cylinders. A minimum reserve inventory of forty-eight (48) cylinders is maintained. An additional fourteen (14) cylinders may be available for inspection and evaluation. The total quantity of cylinders requiring service under this contract is estimated to be between forty-eight (48) and sixty-two (62) cylinders.

5. Period of Performance
The Contractor shall commence performance upon contract award and complete all work no later than 31 August 2026.

6. Place of Performance
Pickup and delivery shall occur at:
Albeni Falls Dam Powerhouse Entrance 2376 East Highway 2
Oldtown, Idaho 83822

Pickup and delivery shall occur only Monday through Thursday between 7:00 a.m. and 3:30 p.m. local time. No pickup or delivery activities shall occur on Fridays, weekends, or Federal holidays. AFD personnel will stage cylinders at or near the public entrance to the powerhouse for Contractor pickup.

7. Contract Line Item Numbers (CLINs)

CLIN 001 – Transport, Evaluation, Hydrostatic Testing, Reporting, Recertification, and Refilling

The Contractor shall:
• Take custody of a minimum of 48 and a maximum of 62 CO2 cylinders.
• Transport cylinders to the Contractor's facility.
• Safely discharge and reclaim CO2 from each cylinder.
• Remove and inspect each valve.
• Conduct internal and external visual inspections of each cylinder.
• Inspect for corrosion, pitting, dents, gouges, thread damage, and other defects.
• Perform hydrostatic testing in accordance with 49 CFR 180.205.
• Test cylinders at the required requalification pressure.
• Measure total and permanent expansion.
• Identify cylinders that fail testing requirements and designate them as unserviceable.
• Evaluate valve condition and determine whether rebuilding or replacement is required.
• Refill all serviceable cylinders to manufacturer-recommended fill capacity.
• Affix required recertification markings and labels.
• Return all serviceable cylinders to Albeni Falls Dam.

As-Found Inspection Report

The Contractor shall provide an As-Found Inspection Report identifying each cylinder by serial number and/or existing recertification stamp.

The report shall include:
• Cylinder identification number.
• Inspection findings.
• Hydrostatic test results.
• Serviceability determination.
• Valve condition.
• Recommended repair or replacement actions.
• Estimated costs associated with repair or replacement recommendations.

The Contractor shall submit the report to the Government Technical Point of Contact prior to performing any repair or replacement work beyond CLIN 001.

Repair Authorization
No repairs, valve replacements, cylinder replacements, or cylinder assembly replacements shall be performed without written Government authorization. The Contractor shall provide a detailed proposal identifying the affected cylinder(s), and
recommended quantities of rebuild/replacement needed for Optional CLINs 0002-0005. Government approval shall be obtained before proceeding with CLINs 0002 through 0005.

Recertification Documentation
Upon completion, the Contractor shall provide recertification documentation for each cylinder and valve assembly including:
• Cylinder serial number.
• Hydrostatic test date.
• Test results.
• Work performed.
• Serviceability determination.
• Recertification date.
• Technician or testing facility identification.

Optional Item CLIN 0002 – Rebuild Kidde Type I Valve

The Contractor shall rebuild existing Kidde Type I valves determined to be repairable. Amount is based upon the As-Found Inspection Report.

Rebuild services shall include replacement of worn seals, gaskets, springs, and other internal components as required to restore the valve to serviceable condition.

Optional Item CLIN 0003 – Replace Kidde Type I Valve

The Contractor shall furnish and install a new Kidde Type I valve when rebuilding is not feasible or economically advantageous.
Replacement valves shall be new and fully compatible with existing cylinder assemblies and fire suppression system requirements.

Amount is based upon the As-Found Inspection Report.

Optional Item CLIN 0004 – Replace Complete 75-Pound Cylinder Assembly

The Contractor shall furnish a new complete cylinder assembly including:
• New 75-pound CO2 cylinder.
• New valve assembly.
• Required markings and certifications.
• Protective cap.

The assembly shall meet all applicable DOT and manufacturer requirements.

Amount is based upon the As-Found Inspection Report.

Optional Item CLIN 0005 – Replace 75-Pound Cylinder Only

The Contractor shall furnish a new 75-pound CO2 cylinder without valve. The cylinder shall be compatible with existing Kidde Type I valves and comply with all applicable DOT requirements.

Amount is based upon the As-Found Inspection Report.

8. Quality Assurance
The Government Quality Assurance Representative (QAR) shall inspect cylinders prior to release to the Contractor. Upon return, the Government will verify:
• Required recertification markings.
• Documentation completeness.
• Physical condition of cylinders.
• Proper valve installation.
• Required safety labels and identification markings.

The Government reserves the right to reject improperly tested, documented, or certified cylinders.

SEE ATTACHED: UpdatedScope of Work and Price Schedule in Amendment.