Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Alert System Integration (Electrical & Sensors)

Active

Federal

Response Deadline09/09/2026, 09:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract involves the installation of an electronic alert system designed to detect and respond to high-flow conditions at a dam located in Mercedes, Texas, with a zip code of 78570. The system will integrate flashing lights, sensors, and alarms to provide immediate visual and auditory warnings during elevated water flow events, ensuring safety and operational readiness. This is a subcontract under NAICS code 238210, classified as an electrical and sensors installation project, and is being managed by the International Boundary and Water Commission, U.S.-Mexico division. The solicitation was posted on August 4, 2026, with a response deadline of September 9, 2026, at 9:00 PM. Performance is required at the specified location with no alternate performance sites indicated, and no set-aside designation or funding details are provided.

General Info

Install electronic alert system with sensors and alarms at dam in Mercedes, Texas, for high-flow detection.

Agency

International Boundary And Water Commission: Us-Mexico → Internat Boundary And Water CommissionView Agency

NAICS

238210 - Electrical Contractors and Other Wiring Installation ContractorsView NAICS

Place of Performance

Mercedes, TX, 78570, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 4

subcontract

Response DeadlineSep 9

Submission deadline

Response Deadline

09/09/2026, 09:00:00 PM UTCin about 1 month

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyInternational Boundary And Water Commission: Us-Mexico → Internat Boundary And Water Commission

ContactsNo contacts available

OfficeN/A

Organization / Agency

International Boundary And Water Commission: Us-Mexico → Internat Boundary And Water Commission

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Installation of an electronic alert system including flashing lights, sensors, and alarms to activate during high-flow conditions at the dam.

Similar Contracts

Same NAICS industry code

Elevator Lobby 2 Way CommunicationsThe contract involves the installation of 23 new two-way communication boxes in elevator lobbies across the terminal, including 17 passenger elevators, three service elevators, and three ramp landing elevators. This work is part of a broader effort to enhance emergency communication infrastructure within the airport facility and is being managed by the Aviation Project Management Group under the Port of Seattle. The project is forecasted with a posting date of July 31, 2026, and falls under NAICS code 238210, indicating it pertains to electrical contracting services. Primary point of contact is Angela Peterson, with Christina Burdett serving as the project manager, and all correspondence should be directed through the provided email addresses and phone numbers. The work location is at the Port of Seattle facility, though specific city or state details are not provided in the data.

Aviation Project Management Group

POSTED

about 10 hours ago

DEADLINE

Variable Frequency Drives (VFD) Replacement Phase 3 (DBB)The Port of Seattle will replace 125 aging Robicon variable frequency drives (VFDs) with new equipment as part of Phase 3 of its VFD Replacement initiative. This effort aims to upgrade outdated infrastructure to ensure system reliability and improve operational efficiency across aviation facilities and infrastructure. The new VFDs will be fully integrated with the Port’s Direct Digital Controller (DDC) system to enable real-time energy usage monitoring, output control readings, and efficiency tracking, enhancing the Port’s ability to manage power consumption and maintain optimal performance. The scope includes all necessary wiring, testing, commissioning, and installation of associated equipment required to deliver a fully functional and synchronized system. The work falls under NAICS code 238210 and is managed by the Aviation Facilities & Infrastructure division, with technical oversight from Project Manager Sharon Miick and primary point of contact Yanet Maldonado. Although the solicitation number and set-aside details are not specified, the forecast was posted on July 31, 2026, signaling upcoming procurement activities. The project is critical for modernizing the Port’s electrical infrastructure and supporting long-term sustainability goals through precise control and monitoring of motor-driven systems. All work must be performed on-site at the Port’s facilities, with full accountability for system integration, performance validation, and operational readiness upon completion.

Aviation Facilities & Infrastructure

POSTED

about 10 hours ago

DEADLINE

Operational Security Cameras Bagwell and North Cargo AreasThe contract requires the provision of design, permitting, and construction services to install 50 high-resolution cameras across 43 sites in the Bagwell and North Cargo Operations areas of the Port of Seattle. The primary objective is to enhance security and enforcement capabilities by replacing outdated systems with improved coverage, specifically targeting main terminal drive lanes and entrances previously unmonitored, with the goal of supporting forensic investigations and adherence to port movement rules. In the Bagwell area, the new cameras will shift focus from conveyor systems and security doors to critical transit corridors, while the North Cargo operations will benefit from flexible, user-controlled Pan Tilt Zoom units that provide broad surface area monitoring and dynamic viewing capabilities to address operational gaps. All work must be completed in accordance with specified technical and operational standards to ensure seamless integration with existing security infrastructure. The project is managed by the Aviation Project Management Group under the Port of Seattle, with primary point of contact Angela Peterson and Project Manager Randa Williams available for coordination. The North American Industry Classification System code 238210 identifies this as a specialty trade contracting effort focused on electrical and communication system installation. Although the solicitation has not yet been formally issued, the forecasted posting date is July 31, 2026, indicating this is a forward-looking opportunity for qualified contractors to prepare proposals. The place of performance is within the Port of Seattle’s operational boundaries, and all contractors must be prepared to navigate port-specific logistics, security protocols, and environmental constraints during installation and commissioning.

Aviation Project Management Group

POSTED

about 10 hours ago

DEADLINE

Rental Car Facility (RCF) Quick Turn Around (QTA) Area Fire Suppression System Replacement (Re-bid)The Port of Seattle’s Aviation Project Management Group is planning to replace the existing Aqueous Film Forming Foam (AFFF) fire suppression system at the Rental Car Facility located in SeaTac with a full dry chemical system to eliminate contamination from per- and polyfluoroalkyl substances (PFAS). The project entails the complete removal of the current foam-based system, including all contaminated components such as tanks, piping, and sprinkler heads, followed by the design and installation of a new dry system comprising new storage tanks, control valves, pumps, sprinkler lines, and sprinkler heads, along with reserve tanks for system integrity. The new system must be fully integrated with the facility’s existing Fire Alarm System to ensure seamless operation and compliance with safety protocols. The work is classified under NAICS code 238210 and is being advertised as a re-bid under the title Rental Car Facility (RCF) Quick Turn Around (QTA) Area Fire Suppression System Replacement, targeting an efficient and timely execution to minimize service disruption. Primary point of contact for inquiries is Todd Rehm, with Pat Nakamura serving as the Project Manager.

Aviation Project Management Group

POSTED

about 10 hours ago

DEADLINE

Parking Garage UPSThe contract involves the demonstration and full replacement of the existing uninterruptible power supply (UPS) system in a parking garage that supports critical operations including ticketing kiosks and automated gates. The scope includes installing new UPS equipment along with associated electrical infrastructure such as subpanels, feeders, disconnects, and circuit breakers to ensure reliable backup power. The new UPS system will feature integrated data connections to enable remote alarm monitoring and system diagnostics, enhancing operational awareness and response capabilities. All work will be performed at the Port of Seattle’s parking facility, under the oversight of the Aviation Project Management Group. The project is forecasted to be released on July 31, 2026, with no set-aside provisions indicated and NAICS code 238210 specifying electrical contracting services. Primary point of contact is Yanet Maldonado, reachable via email and phone, with JJ Jordan serving as the project manager for coordination and technical inquiries. All work must comply with the operational and safety standards required by the Port of Seattle, and performance is expected to be completed at the designated parking garage location without specified alternative sites.

Aviation Project Management Group

POSTED

about 10 hours ago

DEADLINE

Electrical Unit Price Portwide 2026_1 and _2This contract encompasses a broad range of electrical services to be performed across multiple Port of Seattle facilities including Seattle-Tacoma International Airport, maritime properties, and surrounding areas. The work includes but is not limited to the installation of raceways, wiring, medium voltage cabling, electrical boxes, transformers, temporary power and lighting systems, grounding, and associated testing, all in full compliance with applicable codes and regulations. The Contractor is responsible for providing all labor, tools, equipment, materials, and incidentals required to complete tasks as directed through Work Authorizations issued by the Port. Labor must be delivered according to the specified classifications outlined in the Schedule of Unit Prices, ensuring consistent pricing and accountability. The Port of Seattle anticipates a high volume of small-scale electrical projects over the coming year and plans to award two separate contracts under this solicitation to ensure sufficient capacity and rapid response times. The goal is to maintain operational continuity and meet dynamic project demands by leveraging two qualified contractors. The contract is identified under the NAICS code 238210 and is issued through Port Construction Services, with primary coordination handled by Heather Bowden and Lesley Miles. All work must be performed at designated Port-wide locations, and contractors are expected to adhere strictly to the terms and pricing structure detailed in the bid documents.

Port Construction Services

POSTED

about 10 hours ago

DEADLINE

RFO AWP-0772-00, HNL Fiber Optic Transmission System (FOTS) Design Support and Construction in Honolulu, HI

Solicitation # rfo-awp-0772-00-hnl-fiber-optic-transmission-system-fots-design-support-construction-honolulu-hi-0

The contract involves the installation of a new Fiber Optic Transmission System (FOTS) at Daniel K. Inouye International Airport in Honolulu, Hawaii, executed in two phases with work spanning conduit trenching and bored pathways between three airport buildings. The scope includes both design support and construction activities, targeting a project value between one and five million dollars, with North American Industry Classification System codes 238210, 237130, and 237990 indicating specialized construction and utility infrastructure work. The solicitation is reserved exclusively for small business categories including Small Disadvantaged Businesses, Women-Owned Small Businesses, HUBZone Small Businesses, Veteran-Owned Small Businesses, and Service-Disabled Veteran-Owned Small Businesses under an SBA set-aside program. Interested firms must submit responses by the deadline of August 15, 2026, and should direct all inquiries to Anna Ma, Parsons Subcontract Administrator, at anna.t-ctr.ma@faa.gov or contact her via phone at 360-204-4418. The project is managed by PTSI Managed Services, Inc., with performance strictly located within the state of Hawaii.

PTSI Managed Services, Inc.

POSTED

about 11 hours ago

DEADLINE

RFO AWP-0772-00, HNL Fiber Optic Transmission System (FOTS) Design Support and Construction in Honolulu, HI

Solicitation # rfo-awp-0772-00-hnl-fiber-optic-transmission-system-fots-design-support-construction-honolulu-hi

The contract involves the installation of a new Fiber Optic Transmission System at Daniel K. Inouye International Airport in Honolulu, Hawaii, executed in two phases and including conduit trenching and boring between three airport buildings. The work falls under NAICS codes 238210, 237130, and 237990, with an estimated construction value between one and five million dollars. This solicitation is reserved exclusively for small business set-asides, including Small Disadvantaged Businesses, Women-Owned Small Businesses, HUBZone Small Businesses, Veteran-Owned Small Businesses, and Service-Disabled Veteran-Owned Small Businesses. The solicitation was posted on August 5, 2026, with a response deadline of August 15, 2026. All inquiries and submissions must be directed to Anna Ma, Subcontract Administrator at Parsons, via email at anna.t-ctr.ma@faa.gov or by phone at 360-204-4418. The project is managed under PTSI Managed Services, Inc., and the performance location is clearly identified as Honolulu, Hawaii.

PTSI Managed Services, Inc.

POSTED

about 11 hours ago

DEADLINE

Replacement Fiber Line

Solicitation # Replacement Fiber Line

The contract entails the replacement of existing multimode fiber optic cabling with 12-strand single mode fiber optic cabling to establish a reliable network connection between Building 2436 and Building 2443 at the Earle C. Clements Job Corps Center in Morganfield, Kentucky. The scope requires full provision of labor, equipment, and tools to remove retired multimode aerial fiber lines and splice boxes from utility poles and building infrastructure, while installing new Belden FS3L0024NS OS2 12-strand outdoor fiber along center-owned utility poles from the MDF in Building 2436 to the IDF in Building 2443. Approved materials include Belden ECX-01U rack-mounted enclosures, FFSX12LD adapter panels, and FTSLC900FS01 LC connectors, with all SFPs to be supplied by Job Corps. Performance is governed by stringent quality standards requiring all work and materials to conform to specifications, be merchantable, of good workmanship, and free from defects. The contract is administered by Management & Training Corporation on behalf of the Department of Labor, with invoicing required weekly or bi-weekly, including detailed line items, purchase order numbers, breakdown dates, pricing, and invoice identifiers. The award will be made based on best value, with MTC serving as the sole judge of bid competitiveness. The solicitation is a subcontracting opportunity under a fee-for-service, lump-sum pricing model, open exclusively to small business concerns as defined by NAICS code 238210 with a size standard of $19.0 million in annual receipts, and set aside for Small Business, Small Disadvantaged Business, Women-Owned Small Business, HUBZone, Veteran-Owned, and Service-Disabled Veteran-Owned Small Businesses. Bidders must self-certify their status, provide UEI, tax ID, and DUNS numbers, and comply with FAR clauses including Service Contract Labor Standards (WD# 2015-4687 Rev 31), Contract Work Hours and Safety Standards Act, and Reporting Executive Compensation. First-tier subcontractors exceeding $30,000 must disclose debarment status. Contractors must carry $1 million per occurrence/$3 million aggregate general liability insurance with MTC listed as additional insured, $1 million auto coverage, and $500,000 workers compensation. Additional compliance obligations include adherence to the Drug-Free Workplace Act, Anti

Earle C. Clements Job Corps Center

POSTED

about 11 hours ago

DEADLINE

AEA-0536, VORTAC (ART) Doppler Conversion, Watertown, NY

Solicitation # aea-0536-vortac-art-doppler-conversion-watertown-ny

The FAA is transitioning its existing VHF Omnidirectional Range facility in Watertown, New York, to a modernized Doppler VORTAC system with an offset TACAN component, requiring full demolition of the old structure and construction of a new on-site facility. The new Doppler VORTAC will include a 37-foot by 37-foot steel building housing the equipment, equipped with a 60-foot diameter counterpoise integrated into the roof, along with reinforced foundations, comprehensive site work, and full utility connections. Complementing the main system, an offset TACAN will be installed as a separate 16-foot by 16-foot by 20-foot steel tower with its own foundations, site preparation, and utility infrastructure, designed for walk-up access and operational reliability. The project is being managed by PTSI Managed Services, Inc under the contract designation AEA-0536, with solicitation open to qualified small businesses including SBA-certified categories such as Small Disadvantaged Businesses, Women-Owned Small Businesses, HUBZone, Veteran-Owned, and Service-Disabled Veteran-Owned Small Businesses. The solicitation was posted on August 5, 2026, with responses due by August 28, 2026, and the primary point of contact is Angela Stydinger of the FAA.

PTSI Managed Services, Inc (Parsons)

POSTED

about 11 hours ago

DEADLINE

Electrical Services

Solicitation # COR26-00237

The City of Regina is soliciting qualified providers to deliver comprehensive electrical services for the maintenance, repair, and potential capital upgrades of assets at its Materials Yard, including the Asphalt Plant and associated equipment. Respondents must be experienced in industrial electrical environments and capable of providing electrician, engineering, instrumentation, and technologist/technician services for routine and preventative maintenance, fault diagnosis, and the supply and installation of new or replacement components. All new installations or reconfigurations must be documented with accurate schematics, service diagrams, and manuals. Subcontracting for engineering and instrumentation services is permitted, but submissions must be made under a designated prime contractor if multiple firms are involved. Bidders are responsible for thoroughly evaluating the scope, conditions, and assets through independent site investigation prior to submission, with no claims accepted post-submission for misunderstandings or omissions. Any discrepancies in the solicitation must be reported to the City immediately. A voluntary site information session is scheduled for August 11, 2026, at the City Materials Yard in Regina, Saskatchewan, offering a guided tour and overview of the work but no verbal Q&A; participants must register in advance as outlined in Annex C, with only one representative per company allowed and a limit of ten per group. Photos are permitted during the tour. Proposals must be submitted by September 1, 2026, and all inquiries must be directed via email to procurement@regina.ca as specified. The solicitation number is COR26-00237, and additional details, including asset lists and disclosure requirements, are referenced in Appendix D Section B. The point of contact for the solicitation is Thomas Dang, reachable at 306-777-7333.

POSTED

about 16 hours ago

DEADLINE

Electrical Installation and Wiring ServicesThe contract titled Electrical Installation and Wiring Services is a subcontract under NAICS code 238210, issued by the Board of Regents of the University System of Georgia through the Georgia agency. It encompasses the full scope of electrical system installation including wiring, conduits, and associated components necessary for the project. The solicitation was posted on August 4, 2026, with a response deadline of August 25, 2026, at 7:00 PM, providing potential bidders approximately three weeks to submit proposals. The place of performance and specific location details have not been provided, and no set-aside type or organizational qualifications are specified. All submissions must be made through the official procurement portal linked in the contract details.

Board Of(university System of Georgia) Regents

POSTED

about 17 hours ago

DEADLINE

More opportunities from International Boundary And Water Commission: Us-Mexico → Internat Boundary And Water Commission

Same awarding agency

Construction Materials SupplyThe contract requests the supply of concrete, steel, gravel, and prefabricated components for anchor foundations, sign bases, and site improvements at Retamal Dam, specifically to support infrastructure development in the Mercedes, Texas area with a ZIP code of 78570. The materials are essential for constructing and reinforcing structural elements necessary for the dam’s operational and safety enhancements, with all deliverables expected to meet precise engineering and performance standards. This is a subcontract opportunity classified under NAICS code 327320, which corresponds to ready-mix concrete manufacturing, indicating a focus on material supply rather than construction labor. The solicitation was posted on August 4, 2026, with a firm response deadline of September 9, 2026, at 9:00 p.m. local time, allowing interested parties a roughly six-week window to prepare and submit bids. The contracting entity is the International Boundary and Water Commission, United States-Mexico section, underscoring the project’s relevance to binational water management and infrastructure coordination. While no specific set-aside provisions or point of contact details are provided, interested suppliers must ensure timely submission and adherence to technical specifications for the materials to be considered for award. The procurement is linked directly to the SAM.gov platform for official documentation and submission.

Ready-Mix Concrete Manufacturing

POSTED

DEADLINE

in about 1 month

Warning Sign Fabrication and InstallationThe contract calls for the design, fabrication, and installation of high-visibility warning signs around Retamal Dam to publicize the presence of hazardous hydraulics, ensuring compliance with the Americans with Disabilities Act. All signs must meet strict accessibility standards to be clearly visible and understandable to individuals with visual or cognitive impairments, and must be durable enough to withstand outdoor environmental conditions in the Meridian, Texas area, where the signs will be installed. The work is classified under NAICS code 339950, indicating it involves miscellaneous manufacturing operations specifically related to signs and advertising displays. This is a subcontract opportunity posted by the International Boundary and Water Commission, United States-Mexico, with a response deadline of September 9, 2026. The performance location is confirmed as Mercedes, Texas, with a ZIP code of 78570. Although no solicitation number or point of contact information is provided, interested parties must submit proposals by the stated deadline to be considered. The contract emphasizes safety and regulatory compliance, requiring precise execution of sign design, material selection, and installation protocols to mitigate risk to the public near the dam's dangerous water currents.

Sign Manufacturing

POSTED

DEADLINE

in about 1 month

Anchors and Mooring System InstallationThe contract entails the design, supply, and installation of permanent anchors and mooring lines to establish a buoy barrier system aimed at restricting public access to hazardous hydraulics near a dam. The system is intended to enhance safety by preventing unauthorized entry into dangerous water areas through the strategic placement of anchored buoys, requiring robust engineering to withstand environmental forces and ensure long-term durability. All components must be engineered for permanent deployment in a high-flow, potentially corrosive aquatic environment, with strict adherence to structural and safety standards. The work is to be performed in Mercedes, Texas, with a ZIP code of 78570, under the auspices of the International Boundary and Water Commission: US-Mexico. The contract is classified as a subcontract under NAICS code 238990, which covers other construction-related services not elsewhere classified. The solicitation was posted on August 4, 2026, and responses are due by September 9, 2026, at 9:00 PM Eastern Time. While no set-aside details are provided, the project is critical for infrastructure safety and requires qualified contractors with proven experience in marine installations and waterborne barrier systems.

All Other Specialty Trade Contractors

POSTED

DEADLINE

in about 1 month

Site Preparation and EarthworkThe contract involves comprehensive site preparation and earthwork activities at Retamal Dam to enable the installation of a buoy anchor and warning system. Work includes clearing and grubbing of vegetation, excavation, grading of soil, and implementation of erosion control measures to ensure a stable and safe foundation for the upcoming infrastructure. The project is scoped to meet specific engineering requirements tied to the placement and functionality of the buoy system, with all activities centered around environmental compliance and long-term structural integrity. This subcontract is issued under NAICS code 237990 for other heavy and civil engineering construction and is managed by the International Boundary and Water Commission, U.S. Mexico entity. The place of performance is designated as Mercedes, Texas, with a zip code of 78570. The solicitation was posted on August 4, 2026, and responses are due by September 9, 2026, at 9:00 PM Eastern Time. No set-aside provisions or organizational type designations are specified, and the contract is open for bid under standard subcontract procedures.

Other Heavy and Civil Engineering Construction

POSTED

DEADLINE

in about 1 month

Retamal Dam Buoy System

Solicitation # 191BWC26R0006

The United States Section of the International Boundary and Water Commission is soliciting bids for the Design-Build of the Retamal Dam Buoy System, aimed at enhancing public safety by establishing a waterway barrier line to restrict access to dangerous hydraulics near the dam. The project requires the installation of anchors, an alert system, and warning signs to clearly communicate hazards to the public. Scope of work includes site preparation, inspection of all installed systems and structures, and proper disposal of construction debris and waste, with strict adherence to quality control standards. The contract will be awarded under FAR Part 36 and FAR Part 15, with all responsible bidders required to submit proposals to be considered. Work must occur within the USIBWC operating hours of 7:00 a.m. to 3:30 p.m., Monday through Friday, and is prohibited on federal holidays. All personnel and vehicles must be clearly identified to access the site, as entry requires passage through USIBWC levees where Border Patrol operates, and contractors must avoid trespassing on adjacent lands owned by the U.S. Fish and Wildlife Service. A mandatory site visit is scheduled, and completion of Form 358 is required prior to attendance. The solicitation, numbered 191BWC26R0006, was posted on August 4, 2026, with proposals due by September 9, 2026, and performance is expected to take place in Mercedes, Texas. Questions and communications should be directed to Adrian Knights at the provided email address.

Other Heavy and Civil Engineering Construction

POSTED

DEADLINE

in about 1 month

Retamal Dam Building and Generator

Solicitation # 191BWC26R0005

The United States Section of the International Boundary and Water Commission is soliciting proposals for the Design-Build of an emergency generator and building at Retamal Dam, Texas, under solicitation number 191BWC26R0005. This is a total small business set-aside under NAICS code 236220 with a small business size standard of $45 million, requiring all offerors to be certified small businesses. The project entails replacing a nonfunctional emergency generator with a new unit housed in a metal building on a new concrete pad, supported by a modern diesel fuel tank, and includes full site preparation, debris disposal, quality control testing, and system inspections. Work must be performed between 7:00 a.m. and 3:30 p.m., Monday through Friday, excluding federal holidays, and all personnel must pass through USIBWC levees for site access, with vehicles properly identified due to proximity to Border Patrol operations and adjacent US Fish and Wildlife land. Proposals must be submitted electronically as PDFs in three volumes—Business, Technical, and Pricing—via a secure FedRAMP-compliant SharePoint portal, with submissions due by August 4, 2026, at 9:00 p.m. MST. A mandatory pre-bid site visit requires completion of Form 358, and all bidders must submit SF-24 bid security, with successful offerors required to provide SF-25 performance and payment bonds backed by sureties listed in Treasury Circular 570. The contract is firm-fixed-price, governed by FAR Part 14, and includes stringent warranties: a minimum five-year warranty for the generator and automatic transfer switch and a twenty-year warranty for the roof system and shingles, as specified in Technical Specification 01.78.36. Compliance with the Buy American Act for construction materials is mandatory, and Davis Bacon prevailing wage rates apply. Contractors must adhere to SBU data handling protocols under 18 USC Sections 641, 793, 794, 798, and 952, and submit OSHA incident rate data for the past five years. Evaluation criteria include technical plan for design and construction, past performance, organizational experience, safety practices, schedule, resource value information, and submittal compliance, with award based on the most advantageous proposal through rational tradeoff between non-cost factors and price. Proposals are subject to pass/fail

Commercial and Institutional Building Construction

POSTED

DEADLINE

Chemical Dosing Skid Pump System

Solicitation # FY265701045

This solicitation, numbered FY265701045, is a 100% small business set-aside issued as a combined synopsis and request for quote under FAR Subpart 12.6, targeting the procurement of Chemical Dosing Skid Systems Pumps for the IBWC Amistad and Falcon Power Plants in Del Rio, Texas. Only small businesses certified under NAICS code 424690 with no more than 175 employees are eligible to respond, and proposals must be submitted electronically via email to angelica.baca@ibwc.gov by 3:00 PM Mountain Time on August 10, 2026; faxed submissions are strictly prohibited. Each offer must include a completed Price Sheet, an active Unique Entity ID, and a fully executed copy of FAR 52.212-3, with offerors who have completed their annual representations in SAM required to only complete paragraph (b). Proposals must demonstrate technical acceptability through a detailed narrative covering the plan of action, equipment specifications, key team members, and schedule, along with three verifiable references for similar past projects; failure to provide either the technical approach or past performance will render the proposal non-responsive and ineligible for award. The Government will award the contract under the Lowest Price Technically Acceptable (LPTA) method, evaluating solely for technical compliance and lowest price after ensuring all mandatory requirements are met. The deliverables include one Chemical Dosing Single Pump System compliant with DICE DM standards, one Grundfos DDA 7.5-16 Duplex Pump System, a 275-gallon tote of Earth Tec QZ chemical, two complete sets of hard copy and electronic manuals covering operation, parts, service, and maintenance, and on-site training at the Amistad Dam Field Office. All items must be delivered within 90 calendar days of award, with training completed within 10 days of delivery. The equipment must be constructed using specified materials including acrylic blocks, CPVC wetted parts, PTFE valve seats, FKM/Viton seals, ABS Black handles, and stainless-steel fasteners, mounted on a Tuffskid HDPE skid that is 100% UV stabilized and NEMA 4X compliant. The contractor is also subject to Buy American requirements, FAR 52.203-6 with Alternate I, Service Contract Labor Standards, Combating Trafficking in Persons, and other statutory

Other Chemical and Allied Products Merchant Wholesalers

POSTED

DEADLINE

Monthly Progress Reporting and QA Monitoring SupportThe contract requires the preparation and submission of detailed monthly progress reports that include performance metrics, compliance status, and supporting photographic documentation, ensuring consistent tracking and transparency of project activities. It also involves active participation in supporting the QA Surveillance Plan and completing all necessary government monitoring forms, reinforcing adherence to quality standards and regulatory requirements. The work is tied to the International Boundary and Water Commission: U.S.-Mexico and must be performed in an area with a zip code of 88005, indicating the location of primary operations. This is a Small Business Set Aside contract under NAICS code 541611, designated for SBA-qualified small businesses, and the proposal must be submitted by August 31, 2026, with the solicitation posted on August 1, 2026. The nature of the work is strictly subcontractor-focused, aligning with federal obligations for administrative and compliance support tied to binational water management infrastructure.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Project Planning and Safety DocumentationThe contract requires the development and submission of a comprehensive Project Work Plan along with a Health and Safety Plan and a Job Safety Hazard Analysis within 14 days of contract award, with active coordination required between the subcontractor, the prime contractor, and government representatives to ensure alignment with safety and operational standards. The work is classified as a Small Business Set Aside under the SBA program, specifically targeting small businesses, and falls under the NAICS code 541611 for management consulting services, indicating that the scope involves planning, analysis, and compliance-related deliverables rather than direct construction or field operations. Performance is expected to be carried out with a place of performance in the 88005 zip code area, though no specific city or state is provided. The contract was posted on August 1, 2026, with a response deadline of August 31, 2026, and is issued by the International Boundary and Water Commission, U.S.-Mexico division, underscoring its relevance to cross-border operational contexts. The subcontractor must prioritize safety documentation and procedural coordination from the outset, as the timely delivery of the Health and Safety Plan and Job Safety Hazard Analysis is a critical condition for project initiation. Although no point of contact is listed, the requirement for collaboration with government and prime entities implies a need for clear communication channels and responsiveness throughout the planning phase. The absence of detailed address information suggests the work may be primarily administrative or remote, with physical performance likely confined to the designated zip code region.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Topographic Surveying (Pre- and Post-Disposal Volume Verification)The contract requires the performance of pre- and post-disposal topographic surveys at two designated sites: the Hershey Arroyo Stockpiles and the Angostura Gravel Pit, with the primary objective of verifying sediment volumes through precise, licensed surveying techniques and equipment. These surveys are critical for ensuring accurate volumetric measurements before and after the disposal of materials, supporting compliance, environmental monitoring, and resource management efforts. All work must adhere to established industry standards and utilize certified methodologies to guarantee data integrity and regulatory alignment. The contract is classified as a subcontract under a Small Business Set Aside—Total designation, indicating it is reserved exclusively for small businesses as defined by the SBA. It falls under NAICS Code 541370, which pertains to surveying and mapping services, and is issued by the International Boundary and Water Commission: US-Mexico. Responses are due by August 31, 2026, and the performance location is associated with ZIP code 88005. The scope of work demands rigorous accuracy, adherence to technical specifications, and timely delivery of survey data to support operational and compliance objectives at the specified sites.

Surveying and Mapping (except Geophysical) Services

POSTED

DEADLINE

Stormwater Pollution Prevention Plan (SWPPP) Development and ComplianceThe contract requires the development and implementation of a Stormwater Pollution Prevention Plan (SWPPP) to ensure environmental compliance during excavation and hauling operations, with a focus on preventing pollution from stormwater runoff. The plan must include ongoing monitoring, regular reporting, and the execution of effective erosion and sediment control measures to mitigate impacts on water quality. The work is tied to activities performed in the 88005 zip code area and must adhere to all applicable federal and state environmental regulations. This is a Small Business Set Aside subcontract under NAICS code 541620, reserved exclusively for small businesses, and is issued by the International Boundary and Water Commission: U.S.-Mexico. Proposals must be submitted by August 31, 2026, and the solicitation was posted on August 1, 2026. While specific performance location details beyond the zip code are not provided, the scope centers on environmental stewardship during earthmoving and material transport activities, requiring proven expertise in stormwater management and regulatory compliance.

Environmental Consulting Services

POSTED

DEADLINE

Sediment Excavation and HaulingThe contract entails the excavation of approximately 250,000 cubic yards of sediment from the banks of the RGCP and the transportation of that material via belly dump trucks to the USIBWC-owned Angostura Gravel Pit for disposal, with the requirement to spread the material evenly across the site. The work is classified as a subcontract under a Small Business Set Aside designation, meaning only small businesses are eligible to bid, and it is governed by NAICS code 237310, which corresponds to water and wastewater treatment plant construction. The solicitation was posted on August 1, 2026, with a response deadline of August 31, 2026, at 9:00 PM, and the performance location is identified with a zip code of 88005. The contracting agency is the International Boundary and Water Commission, U.S. Section, and the opportunity is accessible through the SAM.gov platform.

Highway, Street, and Bridge Construction

POSTED

DEADLINE