Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Sediment Excavation and Hauling

Active

Federal

Response Deadline08/31/2026, 09:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract entails the excavation of approximately 250,000 cubic yards of sediment from the banks of the RGCP and the transportation of that material via belly dump trucks to the USIBWC-owned Angostura Gravel Pit for disposal, with the requirement to spread the material evenly across the site. The work is classified as a subcontract under a Small Business Set Aside designation, meaning only small businesses are eligible to bid, and it is governed by NAICS code 237310, which corresponds to water and wastewater treatment plant construction. The solicitation was posted on August 1, 2026, with a response deadline of August 31, 2026, at 9:00 PM, and the performance location is identified with a zip code of 88005. The contracting agency is the International Boundary and Water Commission, U.S. Section, and the opportunity is accessible through the SAM.gov platform.

General Info

Excavate 250,000 CY sediment, transport to Angostura Gravel Pit, small business set aside, SAM.gov, zip 88005.

Agency

International Boundary And Water Commission: Us-Mexico → Internat Boundary And Water CommissionView Agency

NAICS

237310 - Highway, Street, and Bridge ConstructionView NAICS

Place of Performance

NM, 88005, USA

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 1

subcontract

Response DeadlineAug 31

Submission deadline

Response Deadline

08/31/2026, 09:00:00 PM UTCin 29 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyInternational Boundary And Water Commission: Us-Mexico → Internat Boundary And Water Commission

ContactsNo contacts available

OfficeN/A

Organization / Agency

International Boundary And Water Commission: Us-Mexico → Internat Boundary And Water Commission

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Excavate approximately 250,000 cubic yards of sediment from RGCP banks and transport using belly dump trucks to the USIBWC-owned Angostura Gravel Pit for disposal, including spreading material evenly.

Similar Contracts

Same NAICS industry code

Fleet Fast EV Charging - ConstructionThe Port of Seattle’s Aviation Project Management Group is forecasting a construction contract for fast EV charging infrastructure, aligned with NAICS code 237310 for Electrical and Other Wiring Installation. The solicitation is set to be released on July 31, 2026, and will focus on the installation of high-capacity electric vehicle charging systems to support fleet operations, likely targeting airport and ground service equipment. The project is expected to involve site preparation, electrical upgrades, and integration of charging hardware and software systems at unspecified locations within the Port’s aviation facilities. Key contacts for inquiries are Angela Peterson, the primary point of contact, and Katie Techa, the Project Manager, who can be reached via phone or email provided for further details. No set-aside provisions or eligibility restrictions are indicated at this time.

Aviation Project Management Group

POSTED

about 7 hours ago

DEADLINE

Fisherman’s Terminal (FT) Entry and Exit Paving RedevelopmentThe Fishermen’s Terminal Entry Redevelopment Project will revitalize the entry and exit drives along 19th Ave W, along with the former Downie Building (C-14) footprint and surrounding parking areas. Existing pavement in deteriorated condition will be milled and resurfaced, while aging stormwater infrastructure will be fully replaced and expanded to divert runoff from combined sewer lines into dedicated storm drainage systems, with water quality treatment incorporated where qualifying pavement surfaces are replaced. The remaining concrete slab from Phase 1 will be demolished to make way for a blended layout of new parking spaces and native green space designed as a pollinator habitat, potentially housing a stormwater treatment facility. An irrigation system will be installed to support the new landscaping, which will also extend to the median along the entry drive. New electric vehicle charging stations will be integrated into the expanded parking area, and a protected two-way bike lane will be constructed to connect the terminal’s entry directly to the West Wall bike path, enhancing multi-modal accessibility. Pedestrian pathways will be upgraded to improve connectivity to the intersection of 21st Ave W and W Emerson Pl, as well as the adjacent King County Metro bus stop. Lighting will be enhanced throughout the newly configured parking and path areas, and comprehensive wayfinding systems will be implemented to guide pedestrians and cyclists through the redeveloped campus. The project is forecasted to be solicited under NAICS code 237310 by the Port of Seattle’s Waterfront Project Management office, with primary contact information provided for project inquiries and coordination.

Waterfront Project Management

POSTED

about 7 hours ago

DEADLINE

Asphalt Paving & Striping Unit Price Portwide 2026The contract encompasses a broad range of pavement and infrastructure maintenance activities across multiple Port of Seattle locations including Seattle-Tacoma International Airport, Maritime Properties, and adjacent areas. Work includes new asphalt paving and patching, overlays with fabric, crack sealing, seal coating, profile grinding, haul and disposal of grinding spoils, removal of existing striping, surface preparation for new markings, various stripe painting, saw cutting and coring of non-hazardous concrete and asphalt, installation of concrete wheel stops, curb repair and replacement, sidewalk lifting and leveling, and drainage system enhancements. All work requires adherence to performance standards and may involve obtaining necessary permits for improvements to public infrastructure. This procurement is issued under the title Asphalt Paving & Striping Unit Price Portwide 2026 by the Port Construction Services division of the Port of Seattle. The solicitation is posted as a forecast with a NAICS code of 237310 indicating highway and street construction. Primary point of contact is Heather Bowden, with Lesley Miles serving as project manager; inquiries should be directed via their provided email addresses and phone numbers. The contract will be administered across numerous port-wide sites with performance expected to meet specified technical and safety requirements, though no specific location details are provided in the data. The forecast date of July 31, 2026, suggests this is a planning notice for future work, not an active solicitation.

Port Construction Services

POSTED

about 7 hours ago

DEADLINE

Paving and Asphalt ServicesThe contract is for paving and asphalt services covering grading, base preparation, and asphalt installation for roads, parking lots, and accessways under a total small business set-aside, as defined by the SBA and FAR 19.5, with a NAICS code of 237310. It is issued as a subcontract by the ASC Commodities Division within the Department of Defense, with responses required by August 24, 2026, following a posting date of August 1, 2026. Work must be performed at locations determined by the agency, though specific cities or states are not listed, and the solicitation is accessible through the DIBBS system for qualified small business contractors seeking to bid.

ASC COMMODITIES DIVISION

POSTED

about 19 hours ago

DEADLINE

Asphalt Paving and Roadway ConstructionThe contract titled Asphalt Paving and Roadway Construction pertains to the development of access roads and parking areas through asphalt paving operations and is classified as a subcontract under NAICS code 237310. The solicitation was posted on August 1, 2026, with a response deadline set for September 15, 2026, at 6:00 PM Eastern Time. Work is to be performed in Florida under the purview of Technical Services, though specific city or ZIP code details for the place of performance are not provided. The project involves the full scope of roadway construction related to asphalt installation, including grading, base preparation, paving, and compaction to meet applicable standards. Interested parties must submit proposals prior to the deadline, and all work must be completed in compliance with industry best practices and local regulations governing public infrastructure construction in the state. The official portal for this solicitation is accessible via the provided link.

Technical Services

POSTED

about 24 hours ago

DEADLINE

in about 1 month

ITB 26-141 Small County Outreach Program (SCOP) Milling & Resurfacing Project for E. Gospel Island Rd (CR 470) from N. Apopka Ave. to SR 44

Solicitation # 26-141

Citrus County, Florida, is soliciting bids for the milling and resurfacing of E. Gospel Island Road (CR 470) from N. Apopka Ave. to SR 44 under Solicitation Number 26-141, with a response deadline of September 15, 2026. The project, estimated at $4,142,947, involves removing approximately four inches of existing asphalt and placing a four-inch overlay using SP 12.5 and FC 12.5 asphalt mixtures with PG 76-22 polymer-modified binder, along with full restoration of pavement markings, signage, and road edge conditioning in compliance with FDOT Greenbook Design Standards, MUTCD, and AASHTO geometric standards. Work must be substantially completed within 90 days of the Notice to Proceed and finally completed within 120 days, under a unit-price contracting method with payment tied to verified quantities such as square yards milled and tons of asphalt placed. The county retains the right to inspect and accept work on-site, requiring Engineer Certification of Completion before formal acceptance. All bidders must operate as responsible entities with verified Unique Entity IDs, comply with strict cybersecurity, insurance, and ethical requirements, including mandatory $1,000,000 cyber insurance coverage maintained for three years post-completion, level II background checks for personnel, E-Verify usage for all employees, and full flow-down of debarment, EEO, and confidentiality clauses to all subcontractors. Insurance mandates include workers’ compensation and Longshoremen Act coverage, with certificates specifying 30-day cancellation notice and retroactive coverage aligned to contract start. Bidders must submit comprehensive documentation via the OpenGov portal, including certifications of insurance, qualifications, FDOT pre-qualification, asphalt mix design, and affidavits addressing human trafficking, conflict of interest, lobbying, and non-collusion. No size or socioeconomic status certifications are required, though DBE compliance is referenced in funding contexts. The award will go to the lowest responsive and responsible bidder whose proposal, evaluated holistically on qualifications, compliance, cost structure, and proposed subcontractor credibility, best serves the county’s interest, with no formal LPTA designation applied. The project is federally aided and governed by FDOT and FHWA guidelines, with all contractual obligations surviving completion, and no options or extensions provided.

Technical Services

POSTED

about 24 hours ago

DEADLINE

in about 1 month

B027-17 CDBG Sidewalks, Curbs and Ramps

Solicitation # B027-17

The contract B027-17 CDBG Sidewalks, Curbs and Ramps, issued by the Economic Development agency of Connecticut through the City of Meriden, will fund the construction of approximately 8,200 square feet of new sidewalk, 1,650 square feet of driveway apron, 1,620 linear feet of concrete curb, and 750 square feet of handicap-accessible ramps to improve pedestrian infrastructure and accessibility. The solicitation was posted on August 1, 2026, with responses due by August 25, 2026, and is classified as a public works project subject to Connecticut’s prevailing wage law under General Statutes Section 31-53, requiring all contractors and subcontractors to pay workers the legally mandated wage rates for the region and trade. In addition to wage compliance, all mechanics, laborers, and on-site workers must complete a 10-hour OSHA construction safety and health course, with proof of completion required for contract compliance, ensuring adherence to federal and state workplace safety standards. The project is funded through the Community Development Block Grant program and is subject to enforcement by the Connecticut Department of Labor, with noncompliance potentially resulting in contract termination or financial penalties. All work is to be performed within the City of Meriden, Connecticut, and contract inquiries should be directed to Susan Martel, Contract Specialist, or Rawle Dummett, Procurement officer, using the contact information provided.

Economic Development

POSTED

DEADLINE

CDBG Sidewalks, Curbs, and Ramps

Solicitation # B027-17

The City of Meriden, Connecticut is seeking qualified contractors to provide labor and materials for the construction of concrete sidewalks, curbs, and accessible ramps using funding from the Community Development Block Grant program administered by the U.S. Department of Housing and Urban Development. The project is being procured under solicitation number B027-17, with bids due by August 26, 2026, and the solicitation was posted on August 1, 2026. Work will be performed within the city limits of Meriden, and all construction must comply with applicable standards for accessibility and infrastructure quality. The procurement is managed by the Connecticut Department of Administrative Services through its Procurement division, and all inquiries should be directed to Denise Olivo, the primary point of contact, via email or phone. Funds are federally sourced and subject to CDBG guidelines, requiring adherence to federal regulations regarding contracting, reporting, and use of funds.

DAS Procurement

POSTED

DEADLINE

Hot Mix Asphalt (HMA) PavingWeston Preparatory Academy is seeking a subcontractor to supply and install 5,561 tons of hot mix asphalt in a two-inch lift for the resurfacing of a parking lot, with full preparation of the base and proper compaction included in the scope of work. The solicitation is open for bids through August 14, 2026, at 4:00 PM, with work expected to be performed in Detroit. The project falls under NAICS code 237310, which classifies it as heavy and civil engineering construction, specifically pavement paving. The contract type is listed as a subcontract, indicating it is part of a larger construction or improvement project managed by the academy, and no set-aside provisions are in place. Bidders must submit responses prior to the deadline using the provided Michigan state portal link for submission.

Weston Preparatory Academy

POSTED

DEADLINE

Mobilization and Site ManagementThe contract titled Mobilization and Site Management requires the successful bidder to fully mobilize equipment and personnel, establish and manage the worksite, and coordinate all logistics necessary to support project operations. This includes ensuring timely deployment of resources, maintaining site readiness, and adhering to all local permitting requirements and regulated work hour limitations. The scope demands a high level of organizational efficiency and compliance with operational standards to support seamless execution on-site. This subcontract is issued by the County of Maui under NAICS code 237310, which pertains to Heavy and Civil Engineering Construction. The solicitation was posted on August 1, 2026, with a response deadline of September 5, 2026. Although specific location details are not provided, the place of performance is within the state of Hawaii. The contract does not specify a set-aside classification or additional organizational type requirements, and no point of contact information is included in the public posting. Bidders must rely on the provided UI link for full submission details and additional instructions.

POSTED

DEADLINE

in about 1 month

Cold Planing (Milling) of Existing PavementThe contract calls for the removal of the existing asphalt surface through cold planing or milling operations to prepare the pavement for resurfacing. This includes the complete removal of the aged or damaged asphalt layer using specialized cold planing equipment, followed by thorough cleanup and responsible disposal of all debris generated during the process. The work must be performed to ensure a smooth, even, and contamination-free surface that meets the required standards for the subsequent paving phase. All materials removed must be transported and disposed of in compliance with local and environmental regulations, and the contractor is responsible for managing the entire process from start to finish without disruption to surrounding areas. The contract is classified as a subcontract under NAICS code 237310 for Highway, Street, and Bridge Construction, issued by the County of Maui in Hawaii. It was posted on August 1, 2026, with a response deadline of September 5, 2026. The opportunity is available through the PublicPurchase platform, and bidders are expected to submit proposals addressing the scope, equipment, timeline, and waste management protocols. While no set-aside preferences or organizational type restrictions are specified, compliance with all contractual obligations and safety standards is mandatory. The place of performance is within Maui County, though exact location details are not provided in the posting.

POSTED

DEADLINE

in about 1 month

Hot Mix Asphalt (HMA) Pavement InstallationThe contract calls for the full-depth installation of Hot Mix Asphalt pavement, encompassing all phases from site preparation through final compaction and finishing, ensuring compliance with established structural integrity and surface smoothness requirements. All work must be executed to meet technical standards without deviation, requiring precision in material application and equipment operation to achieve optimal pavement performance. This subcontract is issued by the County of Maui in Hawaii under NAICS code 237310 for highway and street construction, with a response deadline of September 5, 2026. The solicitation is posted on the PublicPurchase platform, and while specific geographic details and point of contact information are not provided, the place of performance is within the jurisdiction of Maui County. The contract does not specify a set-aside type or organization type, indicating it is open to eligible subcontractors without restrictions based on size or status.

POSTED

DEADLINE

in about 1 month

More opportunities from International Boundary And Water Commission: Us-Mexico → Internat Boundary And Water Commission

Same awarding agency

Monthly Progress Reporting and QA Monitoring SupportThe contract requires the preparation and submission of detailed monthly progress reports that include performance metrics, compliance status, and supporting photographic documentation, ensuring consistent tracking and transparency of project activities. It also involves active participation in supporting the QA Surveillance Plan and completing all necessary government monitoring forms, reinforcing adherence to quality standards and regulatory requirements. The work is tied to the International Boundary and Water Commission: U.S.-Mexico and must be performed in an area with a zip code of 88005, indicating the location of primary operations. This is a Small Business Set Aside contract under NAICS code 541611, designated for SBA-qualified small businesses, and the proposal must be submitted by August 31, 2026, with the solicitation posted on August 1, 2026. The nature of the work is strictly subcontractor-focused, aligning with federal obligations for administrative and compliance support tied to binational water management infrastructure.

Administrative Management and General Management Consulting Services

POSTED

about 24 hours ago

DEADLINE

Project Planning and Safety DocumentationThe contract requires the development and submission of a comprehensive Project Work Plan along with a Health and Safety Plan and a Job Safety Hazard Analysis within 14 days of contract award, with active coordination required between the subcontractor, the prime contractor, and government representatives to ensure alignment with safety and operational standards. The work is classified as a Small Business Set Aside under the SBA program, specifically targeting small businesses, and falls under the NAICS code 541611 for management consulting services, indicating that the scope involves planning, analysis, and compliance-related deliverables rather than direct construction or field operations. Performance is expected to be carried out with a place of performance in the 88005 zip code area, though no specific city or state is provided. The contract was posted on August 1, 2026, with a response deadline of August 31, 2026, and is issued by the International Boundary and Water Commission, U.S.-Mexico division, underscoring its relevance to cross-border operational contexts. The subcontractor must prioritize safety documentation and procedural coordination from the outset, as the timely delivery of the Health and Safety Plan and Job Safety Hazard Analysis is a critical condition for project initiation. Although no point of contact is listed, the requirement for collaboration with government and prime entities implies a need for clear communication channels and responsiveness throughout the planning phase. The absence of detailed address information suggests the work may be primarily administrative or remote, with physical performance likely confined to the designated zip code region.

Administrative Management and General Management Consulting Services

POSTED

about 24 hours ago

DEADLINE

Topographic Surveying (Pre- and Post-Disposal Volume Verification)The contract requires the performance of pre- and post-disposal topographic surveys at two designated sites: the Hershey Arroyo Stockpiles and the Angostura Gravel Pit, with the primary objective of verifying sediment volumes through precise, licensed surveying techniques and equipment. These surveys are critical for ensuring accurate volumetric measurements before and after the disposal of materials, supporting compliance, environmental monitoring, and resource management efforts. All work must adhere to established industry standards and utilize certified methodologies to guarantee data integrity and regulatory alignment. The contract is classified as a subcontract under a Small Business Set Aside—Total designation, indicating it is reserved exclusively for small businesses as defined by the SBA. It falls under NAICS Code 541370, which pertains to surveying and mapping services, and is issued by the International Boundary and Water Commission: US-Mexico. Responses are due by August 31, 2026, and the performance location is associated with ZIP code 88005. The scope of work demands rigorous accuracy, adherence to technical specifications, and timely delivery of survey data to support operational and compliance objectives at the specified sites.

Surveying and Mapping (except Geophysical) Services

POSTED

about 24 hours ago

DEADLINE

Stormwater Pollution Prevention Plan (SWPPP) Development and ComplianceThe contract requires the development and implementation of a Stormwater Pollution Prevention Plan (SWPPP) to ensure environmental compliance during excavation and hauling operations, with a focus on preventing pollution from stormwater runoff. The plan must include ongoing monitoring, regular reporting, and the execution of effective erosion and sediment control measures to mitigate impacts on water quality. The work is tied to activities performed in the 88005 zip code area and must adhere to all applicable federal and state environmental regulations. This is a Small Business Set Aside subcontract under NAICS code 541620, reserved exclusively for small businesses, and is issued by the International Boundary and Water Commission: U.S.-Mexico. Proposals must be submitted by August 31, 2026, and the solicitation was posted on August 1, 2026. While specific performance location details beyond the zip code are not provided, the scope centers on environmental stewardship during earthmoving and material transport activities, requiring proven expertise in stormwater management and regulatory compliance.

Environmental Consulting Services

POSTED

about 24 hours ago

DEADLINE

Las Cruces Facility Sediment Disposal in the Rio Grande Canalization Project

Solicitation # 191BWC26R0011

The United States section of the International Boundary and Water Commission is seeking small businesses to dispose of stockpiled sediment along the Rio Grande channel and within the Rio Grande Canalization Project near Las Cruces, New Mexico. This solicitation, numbered 191BWC26R0011, is a 100% small business set aside under NAICS code 562119, with a small business size standard of $47 million; bidders must perform at least 51% of the sediment removal using their own equipment or equipment owned by another small dredging concern. Offers are due by 3:00 PM Mountain Time on August 31, 2026, and must be submitted via email to seone.jones@ibwc.gov with the solicitation number in the subject line and a valid Unique Entity Identifier included. Faxed submissions will not be accepted. A mandatory site visit is scheduled for August 14, 2026, and all questions must be submitted via email by August 21, 2026, to be addressed. Proposals must include a two- to three-page technical approach detailing the plan of action and key personnel, valid experience documented using IBWC Forms 245 and 245B, and three references for similar past projects with contact details and descriptions. Offerors must also submit a completed Standard Form 1449 with detailed pricing for all line items, the Offeror Representations and Certifications provision, and any required attachments including the PWS, Statement of Equipment, and Wage Determination. The government will award the contract using the Lowest Price Technically Acceptable method, evaluating technical acceptability based on approach, experience, and past performance. The agency reserves the right to cancel the solicitation at any time without financial liability to offerors. All submissions must comply with Federal Acquisition Circular FAC 2026-01, and firms must maintain current certification in SAM.gov.

Other Waste Collection

POSTED

about 24 hours ago

DEADLINE

Retamal Dam Building and Generator

Solicitation # 191BWC26R0005

The United States Section of the International Boundary and Water Commission is soliciting proposals for the Design-Build of an emergency generator and building at Retamal Dam, Texas, under solicitation number 191BWC26R0005. This is a total small business set-aside under NAICS code 236220 with a small business size standard of $45 million, requiring all offerors to be certified small businesses. The project entails replacing a nonfunctional emergency generator with a new unit housed in a metal building on a new concrete pad, supported by a modern diesel fuel tank, and includes full site preparation, debris disposal, quality control testing, and system inspections. Work must be performed between 7:00 a.m. and 3:30 p.m., Monday through Friday, excluding federal holidays, and all personnel must pass through USIBWC levees for site access, with vehicles properly identified due to proximity to Border Patrol operations and adjacent US Fish and Wildlife land. Proposals must be submitted electronically as PDFs in three volumes—Business, Technical, and Pricing—via a secure FedRAMP-compliant SharePoint portal, with submissions due by August 4, 2026, at 9:00 p.m. MST. A mandatory pre-bid site visit requires completion of Form 358, and all bidders must submit SF-24 bid security, with successful offerors required to provide SF-25 performance and payment bonds backed by sureties listed in Treasury Circular 570. The contract is firm-fixed-price, governed by FAR Part 14, and includes stringent warranties: a minimum five-year warranty for the generator and automatic transfer switch and a twenty-year warranty for the roof system and shingles, as specified in Technical Specification 01.78.36. Compliance with the Buy American Act for construction materials is mandatory, and Davis Bacon prevailing wage rates apply. Contractors must adhere to SBU data handling protocols under 18 USC Sections 641, 793, 794, 798, and 952, and submit OSHA incident rate data for the past five years. Evaluation criteria include technical plan for design and construction, past performance, organizational experience, safety practices, schedule, resource value information, and submittal compliance, with award based on the most advantageous proposal through rational tradeoff between non-cost factors and price. Proposals are subject to pass/fail

Commercial and Institutional Building Construction

POSTED

DEADLINE

Trojan UV3000 Plus System Rehabilitation

Solicitation # FY264321005

The United States Section of the International Boundary and Water Commission is conducting market research to evaluate capabilities for the full rehabilitation of the Trojan UV3000 Plus ultraviolet disinfection system at the Nogales International Wastewater Treatment Plant in Rio Rico, Arizona. This effort aims to restore the system to its original operating condition by replacing all core components including 126 new Trojan UV3000 Plus Integra modules, sensor units, controls, circuit boards, cleaning systems, and genuine manufacturer parts. The scope also encompasses installation, controls programming, startup, commissioning, functional testing, operator training, documentation delivery, warranty support, and technical assistance. All hazardous waste such as mercury-containing lamps and ballasts must be removed and disposed of in compliance with regulations. Work must be completed within 120 calendar days after contract award, requiring full turnkey execution with all labor, equipment, transportation, and incidental services provided by the contractor. Respondents must demonstrate direct access to authentic Trojan products through current manufacturer authorization or distribution agreements and prove they can deploy Trojan-certified technicians for all aspects of the work. They must confirm that their approach preserves existing warranties, performance guarantees, software access, and manufacturer support. Experience delivering comparable rehabilitation or certified service on Trojan municipal UV systems within the past five years is required, with up to three project examples to be provided. Companies must submit their business information including Unique Entity Identifier, CAGE code, SAM.gov status, NAICS 333310 size classification, and socioeconomic status, while also identifying any portion of the requirement they cannot fulfill. Responses must be sent via email in PDF or Word format under five pages excluding supporting certifications by August 4, 2026, at 3:00 p.m. Arizona time to three designated addresses. This is strictly a market research notice with no obligation to award a contract, no pricing allowed, and no reimbursement for response costs.

Commercial and Service Industry Machinery Manufacturing

POSTED

DEADLINE

Testing, Record Drawings, and Closeout DocumentationThis contract requires the performance of material and structural testing, the preparation of as-built drawings, and the compilation of comprehensive closeout documentation for a project under the International Boundary and Water Commission: U.S.-Mexico. The work is governed as a small business set-aside under the SBA’s Total Small Business Set-Aside provision, meaning only small businesses are eligible to bid, and it is classified under NAICS code 541370, which pertains to engineering services. The solicitation was posted on July 24, 2026, with a firm deadline for responses on August 8, 2026, at 9:00 PM Eastern Time. The place of performance and specific office details are not provided, but the work is expected to support U.S.-Mexico boundary and water infrastructure projects managed by the agency. All deliverables must meet technical and regulatory standards to ensure accurate recordkeeping and compliance with project closeout requirements.

Surveying and Mapping (except Geophysical) Services

POSTED

DEADLINE

Traffic Control and Access ManagementThe contract titled Traffic Control and Access Management requires the implementation of temporary traffic control measures to ensure uninterrupted access for operational and railroad traffic during construction activities. The work is set under a Small Business Administration Total Small Business Set-Aside, meaning only small business concerns are eligible to compete, and it is classified under NAICS code 561730 for Other Support Activities for Transportation. The solicitation was posted on July 24, 2026, with a response deadline of August 8, 2026, at 9:00 PM Eastern Time. The contracting agency is the International Boundary and Water Commission, United States-Mexico, with performance located within its operational jurisdiction along the U.S.-Mexico border, though specific location details are not provided. The contract is structured as a subcontract, indicating it is part of a larger project managed by a prime contractor. All work must be executed while maintaining safety and continuity for railroad operations and other critical transportation functions.

Landscaping Services

POSTED

DEADLINE

Construction Materials SupplyThe contract is for the supply of ready-mix concrete, rebar, and 4-inch water pipe to support roadway and utility construction activities under a subcontract awarded by the International Boundary and Water Commission: US-Mexico. It is designated as a Total Small Business Set-Aside, meaning only small businesses are eligible to compete, in accordance with the SBA’s regulations under FAR 19.5. The NAICS code 327320 identifies the industry classification as Concrete Pipe, Brick, and Tile Manufacturing, indicating the primary focus on manufactured materials. Solicitation was posted on July 24, 2026, with a response deadline of August 8, 2026, at 9:00 PM. While the exact delivery locations and quantities are not specified, the materials are intended for use in infrastructure projects along the U.S.-Mexico border region, with performance expected to occur in areas managed by the commission. The contract does not include a designated point of contact or specific place of performance details, but bidders must be capable of fulfilling the material requirements as needed for on-site construction operations.

Ready-Mix Concrete Manufacturing

POSTED

DEADLINE

Jersey Barrier Supply and InstallationThe contract calls for the supply and installation of 40 precast concrete Jersey barriers to be used for traffic control and safety purposes, with a specific focus on meeting federal construction and safety standards. This is a subcontract under a Total Small Business Set-Aside designation, exclusively available to small businesses as defined by the Small Business Administration, and the project falls under the NAICS code 327320 for concrete product manufacturing. The solicitation was posted on July 24, 2026, with a deadline for responses set for August 8, 2026, at 9:00 PM Eastern Time. The work is being procured by the International Boundary and Water Commission, U.S.-Mexico branch, though the precise location of performance has not been specified. All deliverables must be completed in accordance with the contract requirements, and bidders are expected to demonstrate capability in manufacturing, transporting, and installing precast concrete barriers to ensure compliance with safety and regulatory expectations.

Ready-Mix Concrete Manufacturing

POSTED

DEADLINE

Water Service Line ReplacementThe contract involves the replacement of a 4-inch water service line, requiring trenching for access, installation of new piping, pressure testing to ensure integrity, and final connection to the existing water distribution system. All work must comply with industry standards for water infrastructure and ensure safe, uninterrupted service post-installation. The project is classified as a subcontract under a Total Small Business Set-Aside, meaning only small businesses are eligible to bid, and it is NAICS-coded as 221320 for Water Distribution Systems. The opportunity is posted by the International Boundary and Water Commission: U.S.-Mexico, indicating the work may relate to border region infrastructure needs. Responses must be submitted by August 8, 2026, with no specific location provided in the data, but performance is expected to occur at a site under the agency’s jurisdiction, likely near the U.S.-Mexico border.

Sewage Treatment Facilities

POSTED

DEADLINE