Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

ANALYZER, BLOOD CHOLEST

Active
SPE2DH-27-T-0248Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This fixed-price solicitation, issued by the Department of Defense Medical Supply Chain, is for the procurement of one blood cholesterol analyzer kit (NSN 6630-01-689-9343). The required AccuTrend Plus meter is a portable, lightweight device featuring an ergonomic design, a large display, and built-in self-testing safety features. Each kit must include the meter, manual, reference card, troubleshooting guide, four AAA batteries, and a carrying case. The delivery is required within 20 days after the order, with the place of performance located at Fort Campbell, Kentucky. The contract mandates strict adherence to medical packaging and marking standards, specifically Medical Marking Standard No. 1, which supersedes MIL-STD-129. Packaging must be commercial-grade, utilizing sealed unit containers and suitable exterior shipping containers to prevent damage. Inspection and acceptance will occur at the destination. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment. Compliance with various FAR and DFARS clauses is required, including regulations regarding the Buy American Act, safeguarding covered defense information, and prohibitions on certain telecommunications equipment. All quotes must be submitted via the DLA Internet Bid Board System.

General Info

DoD procurement of one AccuTrend Plus blood cholesterol analyzer kit for Fort Campbell.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIIN FSH

NAICS

334510 - Electromedical and Electrotherapeutic Apparatus Manufacturing

Place of Performance

BLDG 5505A WICKHAM AVE, FORT CAMPBELL, KY, 42223-5000, USA

Set-Aside

NONE

Documents

1

RFQ SPE2DH-27-T-0248

PDF, High priority: read this firstrfq
High

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIIN FSH
Contacts1 person available
OfficeUSA
Organization / AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIIN FSH
Office AddressUSA
Contacts
Tina Vu
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
ANALYZER,BLOOD CHOLESTEROL
ANALYZER,BLOOD CHOLESTEROL
ACCUTREND PLUS METER HAS BIGGER, EASY-TO-READ DISPLAY AND A SLEEK
ERGONOMIC DESIGN FOR EASY HANDLING; BUILT-IN SAFETY FEATURES HAVING
AUTOMATIC PERFORMANCE AND METER SELF-TESTING; ABILITY TO ADD BLOOD TO
THE STRIP OUTSIDE THE METER HELPS PREVENT CROSSCONTAMINATION AND
IMPROVES PATIENT SAFETY; KIT CONTENTS: METER, MANUAL, REFERENCE CARD,
TROUBLESHOOTING GUIDE, FOUR AAA BATTERIES, CASE; NO FASTING, NO
REFRIGERATION, AND NO CAPILLARY TUBES NEEDED; PORTABLE AND LIGHTWEIGHT,
WITH AN ERGONOMIC DESIGN FOR EASY HANDLING; WORKS INDOORS OR OUT (64 F
TO 95 F), MAKING IT AN APPROPRIATE METER FOR TOTAL CHOLESTEROL
UNIT OF ISSUE KT (KIT)
..
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
..
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
..
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
..
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
..
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
SPE2DH-27-T-0248
SECTION B
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
.. ADEQUATE DATA FOR THE NSN/Part Number: 6630-01-689-9343 Quantity: 1 KT Purchase Request: 7018827865QTY: 1 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334510
New
DIBBS
Voltmeter Equipment Supplier (NSN 6625-01-392-6261)This subcontract involves the manufacture or procurement of six specialized voltmeters meeting NSN 6625-01-392-6261 specifications for the DLA Weapons Support Maritime Supply Chain. The supplier is responsible for ensuring all units are marked and labeled according to MIL-STD-129 and packaged in compliance with RP001 and RA001 standards. Additionally, the contractor must adhere to the Buy American Act and the Berry Amendment. The completed equipment must be delivered FOB Origin to DLA Distribution in Warner Robins, Georgia. This opportunity falls under NAICS code 334510 and is managed by the Department of Defense. Interested parties must submit their responses by the deadline of November 2, 2026.
DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334510
New
DIBBS
CADEX 7400 Battery Analyzer SupplierThis subcontract involves the procurement and delivery of one CADEX 7400 Battery Analyzer for prime contractors supporting Department of Defense supply contracts through the DDSP New Cumberland Facility. The supplier is responsible for ensuring the unit adheres to all DLA Master List technical and quality requirements, with performance taking place in New Cumberland, Pennsylvania. The contract mandates strict adherence to specific military standards, including sampling plans per MIL-STD-1916 or ASQ H1331 Table 1. Additionally, the supplier must comply with MIL-STD-129 for marking and MIL-STD-2073-1E for packaging to ensure the analyzer is delivered fully completed and properly prepared.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 15 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334510
New
International
Medical-Grade Rehabilitation Treadmill System SupplierThis subcontract involves the supply and delivery of a commercial and medical-grade rehabilitation treadmill system for the Parkwood Institute, managed through Healthcare Materials Management Services. The selected supplier is responsible for providing a comprehensive hardware and software package designed for clinical gait training, mobility rehabilitation, and patient assessment. The scope of work requires the delivery of a fully functional and installed system. The contract mandates strict adherence to Canada’s Fighting Against Forced Labour and Child Labour in Supply Chains Act. Interested parties must submit their responses by November 13, 2026, for this project based in Canada under NAICS code 334510.
Healthcare Materials Management Services (HMMS)

POSTED

about 18 hours ago

DEADLINE

in 21 days
View Details
NAICS: 334510
New
International
HMMS04746 - Advanced Contract Award Notice (ACAN) Rehabilitation Treadmill System
Solicitation # rfi_2037
Healthcare Materials Management Services (HMMS) has issued an Advanced Contract Award Notice (ACAN) under solicitation number rfi_2037 for a commercial medical-grade rehabilitation treadmill system. The equipment is intended for clinical gait training, mobility rehabilitation, assessment, and therapeutic applications at St. Joseph's Health Care London, Parkwood Institute in London, Ontario. The procurement specifically identifies the High-Performance Rehabilitation Treadmill (Mercury Med) from manufacturer Atlas Medic. The required deliverable is a complete, fully functional package encompassing all necessary hardware and software, as well as installation, configuration, integration, and initial user training. The purpose of this ACAN is to determine if other proponents can meet the requirements before a sole or single source award is made. Interested respondents must submit their online responses by November 13, 2026. Evaluation focuses on mandatory compliance with Canada's Fighting Against Forced Labour and Child Labour in Supply Chains Act, the provision of a Certificate of Insurance, and the submission of three client and two financial references. Eligibility is strictly defined, as HMMS reserves the right to disqualify U.S. businesses that employ fewer than 250 full-time employees in Canada, while favoring those that qualify as Canadian businesses. Additionally, proponents must disclose any potential conflicts of interest and any funding or in-kind programs provided to HMMS or the associated hospitals.
Healthcare Materials Management Services (HMMS)

POSTED

about 18 hours ago

DEADLINE

in 21 days
View Details
NAICS: 334510
New
Federal
Scanner Ultrasonic Ocular
Solicitation # W91CRB-26-AWSP-Scanner-Ultrasonic-Ocular-RPP
W6QK Acc-Apg

POSTED

about 20 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334510
New
SLED
Automated Traffic Monitoring Equipment SupplierThis subcontract for an Automated Traffic Monitoring Equipment Supplier involves providing essential hardware and software for automated data collection on Regional Transportation District PnR projects. The scope of work includes the delivery of video-based collection systems, AI-driven image processing software for counting pedestrians and vehicles, and specialized monitoring equipment to track the accumulation of motor vehicles and bicycles. All provided equipment and software licenses must adhere to strict RTD data validation and quality standards. Managed under the Planning agency in Colorado, the opportunity is categorized under NAICS code 334510. Interested parties must submit their responses by the deadline of November 20, 2026. The contract focuses on supporting prime contractors through the deployment of advanced technological tools to ensure accurate traffic and transit data collection.
Planning

POSTED

1 day ago

DEADLINE

in 29 days
View Details
NAICS: 334510
New
SLED
Submit one complete bid in a sealed, opaque envelope or package. The exterior must be clearly marked SEALED BID - KDMC TELEMETRY SYSTEM - DO NOT OPEN and must identify the bidder. A searchable PDF copy may be included on a USB drive inside the sealed
Solicitation # KDMC-RHTP-TELEMETRY
King's Daughters Medical Center (KDMC) is soliciting firm-fixed price bids under solicitation KDMC-RHTP-TELEMETRY for a turnkey, hospital-wide telemetry and patient monitoring system in Brookhaven, Mississippi. The project requires the contractor to furnish, install, configure, integrate, and support a complete system, including 28 wearable wireless transmitters, 34 bedside monitors, 36 transport-capable modules, and a redundant virtualized central monitoring architecture. A critical requirement is the seamless integration with the Meditech electronic medical record environment and adherence to strict cybersecurity standards, including the provision of a machine-readable Software Bill of Materials. The entire project, including final invoicing, must be completed and accepted by June 30, 2027. Bids must be submitted in a sealed, opaque envelope marked SEALED BID - KDMC TELEMETRY SYSTEM - DO NOT OPEN by the deadline of October 28, 2026. Award will be granted to the responsible bidder offering the lowest responsive bid, with mandatory technical, clinical, and cybersecurity requirements evaluated on a pass/fail basis. The contractor is responsible for all low-voltage cabling, labeling, and asset records, and must provide clinical super-user training. Final acceptance is contingent upon 30 consecutive days of stable production operation and the successful closure of all technical and clinical validation tests. Compliance with federal standards, including SAM.gov exclusion verification and specific environmental and labor acts for contracts exceeding certain thresholds, is mandatory.
MPTAP

POSTED

1 day ago

DEADLINE

in 5 days
View Details
NAICS: 334510
New
Federal
PINPOINT SIGMA SYS Manufacturing/SupplyThis subcontract involves the manufacturing and supply of the complete PINPOINT SIGMA SYS for prime contractors supporting DLA Mechanicsburg. The selected provider is responsible for procuring or manufacturing integrated hardware, software, and firmware in strict accordance with technical requirements, while maintaining the total equipment baseline configuration and conducting plant quality assurance. The final deliverable consists of one fully inspected and packaged unit. Compliance is a critical component of this effort, requiring the contractor to hold CMMC Level 1 certification. Additionally, all work must adhere to specific military standards, including MIL-STD-973, MIL-STD-130, MIL-STD-129, and MIL-STD-2073-1. The opportunity falls under NAICS code 334510 and is managed by the Department of Defense.
SPRMM1 DLA Mechanicsburg

POSTED

2 days ago

DEADLINE

in 4 days
View Details
NAICS: 334510
New
Federal
FAULTFINDER ETS SYS Manufacturing/SupplyThis subcontract involves the manufacturing and supply of the complete FAULTFINDER ETS SYS for prime contractors supporting DLA Mechanicsburg. The scope of work includes the procurement or manufacture of integrated hardware, software, and firmware in strict accordance with technical requirements. The contractor is responsible for maintaining the total equipment baseline configuration and conducting comprehensive plant quality assurance to ensure the delivery of one fully inspected and packaged unit. Compliance is a critical component of this contract, requiring the provider to maintain CMMC Level 1 certification. Additionally, all deliverables must adhere to specific military standards, including MIL-STD-973, MIL-STD-130, MIL-STD-129, and MIL-STD-2073-1. The project falls under NAICS code 334510 and is managed through the Department of Defense.
SPRMM1 DLA Mechanicsburg

POSTED

2 days ago

DEADLINE

in 4 days
View Details
NAICS: 334510
New
Federal
6530--NX EQ Environmental Disinfection Systems Pulsed Xenon UV Light (VA-27-00012571)
Solicitation # 36C10X27Q0009
The Department of Veterans Affairs Enterprise Procurement Office is conducting market research through this Sources Sought Notice to identify qualified sources capable of providing Xenex LightStrike+ Environmental Disinfection Systems Pulsed Xenon UV Light or equivalent products. The government intends to establish a single Requirements Contract with Firm-Fixed Price orders under FAR 16.503 to supply these systems to medical centers and facilities nationwide. The procurement falls under NAICS code 334510 with a size standard of 1,250 employees. Interested respondents must maintain active registration in the System for Award Management and provide verification in the SBA database if claiming SDVOSB or VOSB status. The required systems must be FDA authorized whole room microbial reduction devices utilizing high intensity pulsed xenon emitters in the 240 to 315 nm range. Key technical requirements include a single mobile unit capable of 360-degree exposure, a unified operator interface with independent cloud-based reporting, and the provision of comprehensive operator training. The government is considering several specific Xenex part numbers and optional one-year warranty extensions. Responses are due by November 4, 2026, and must include the company's UEI, socioeconomic status, country of origin for products, technical literature meeting minimum requirements, and estimated pricing inclusive of flat rate shipping.
Sac Frederick (36C10X)

POSTED

2 days ago

DEADLINE

in 12 days
View Details
NAICS: 334510
New
Federal
Sources Sought for Cefaly Devices at VA Puget Sound
Solicitation # 36C260-27-AP-0723
The Department of Veterans Affairs, specifically the VA Puget Sound Health Care System, is seeking sources for the procurement of an estimated 1,224 Cefaly Connected migraine treatment devices. This sources-sought notice, identified by solicitation number 36C260-27-AP-0723, falls under NAICS code 334510. The requirement is managed by the Network Contract Office 20 based in Vancouver, Washington, with the place of performance located in Seattle, Washington. The procurement specifies the need for FDA-cleared CEFALY Connected devices, which are portable, medication-free systems that utilize electric impulses to treat acute migraine attacks and prevent future episodes. Key technical requirements for the devices include Bluetooth-enabled synchronization with the CeCe Migraine Management app and an improved battery life of seven hours. Interested respondents were required to provide information by the deadline of November 4, 2026.
260-NETWORK Contract Office 20 (36C260)

POSTED

2 days ago

DEADLINE

in 13 days
View Details
NAICS: 334510
New
Federal
Ultrasound Diagnostic System, Hand Carried (USHC) - Prototype
Solicitation # W91CRB-RPP-USHC
The U.S. Army, through the Portfolio Acquisition Executive Maneuver Ground and Project Manager Maneuver Medical Devices, is soliciting prototype proposals for a hand-carried Ultrasound Diagnostic System (USHC). This effort is structured as a Direct Other Transaction Agreement under 10 U.S.C. 4022, meaning it is not a FAR-based contract. The government seeks a Commercial-Off-The-Shelf or Non-Developmental Item capable of supporting medical operations in austere Role of Care 3 environments, specifically for FAST exams, ultrasound-guided procedures, and ruling out deep vein thrombosis. Selected vendors must deliver two prototype units for operational and environmental testing in accordance with MIL-STD-810H. The system must be FDA cleared for human use, Trade Agreements Act compliant, and capable of operating on both CONUS and OCONUS power infrastructures. The estimated period of performance is twelve months, with prototype delivery expected 45 to 60 days after award. Evaluation is based on a comparative best-value methodology, prioritizing technical approach, performance compliance, reliability, schedule realism, and past performance over cost. Key requirements include MIL-STD-130N compliant IUID marking, NIST SP 800-171 cybersecurity compliance, and a minimum one-year warranty. Proposals must be submitted via DoD SAFE or secure email by November 6, 2026, and must adhere to strict page limits across four specific volumes. Notably, participants in this prototype agreement may be eligible for a noncompetitive follow-on production contract.
W6QK Acc-Apg

POSTED

2 days ago

DEADLINE

in 15 days
View Details

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIIN FSH

Same awarding agency

NAICS: 325998
New
DIBBS
Supply of Single-Use Instant Heat Treatment Pads
All Other Miscellaneous Chemical Product and Preparation Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 6 days
View Details
NAICS: 423450
New
DIBBS
Supply of Liquid Measurement Devices (NSN 6640-01-606-2432)
Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

about 15 hours ago

DEADLINE

in 6 days
View Details
NAICS: 423450
New
DIBBS
Supplier of AccuTrend Plus Blood Cholesterol Analyzer KitsThis subcontract opportunity with the Department of Defense Medical Supply Chain involves the provision of AccuTrend Plus blood cholesterol analyzer kits or approved equivalents meeting NSN 6630-01-689-9343. Each kit must be fully equipped with user manuals, reference cards, troubleshooting guides, batteries, and carrying cases. All units are required to be packaged according to Medical Marking Standard No. 1 and MIL-STD-2073-1E, with delivery terms set as FOB Destination to Fort Campbell. The contract is categorized under NAICS code 423450 and requires strict compliance with the Buy American Act. Interested parties must submit their responses by October 29, 2026, to support prime contractors operating within the DLA Medical Supply Chain.
Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

about 15 hours ago

DEADLINE

in 6 days
View Details
NAICS: 488510
New
DIBBS
Medical Device Packaging and International Logistics Provider
Freight Transportation Arrangement

POSTED

about 15 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
Medical Gas Pressure Regulator Supplier
Surgical and Medical Instrument Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 6 days
View Details
NAICS: 484220
New
DIBBS
Specialized Packaging and Delivery Services for Medical EquipmentThis subcontract involves providing specialized packaging, marking, and transportation services for prime contractors supporting Department of Defense medical supply chain projects. The scope of work requires strict adherence to military standards, specifically packaging per RP001, marking per MIL-STD-129 and Medical Marking Standard No. 1, and the implementation of IUID in accordance with MIL-STD-130. The contractor must utilize approved IUID labeling equipment and MIL-SPEC materials to ensure all equipment is compliant with military specifications. The final delivery of accepted equipment is designated as FOB Destination to Hampton, Virginia. This opportunity falls under NAICS code 484220 and is managed by the Medical Supply Chain FSH. Interested parties should note the response deadline of October 29, 2026.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 15 hours ago

DEADLINE

in 6 days
View Details
NAICS: 423450
New
DIBBS
Supply of Ivoclar Vivadent Electric Dental Laboratory Press FurnaceThis subcontract involves the procurement of one Ivoclar Vivadent electric dental laboratory press furnace, model P/N 645984EU, to support prime contractors on DLA medical supply chain projects. The required equipment must feature an intelligent press function, a quartz tube Kanthal heating muffle, and a crack detection system. The delivery consists of one fully functional unit that adheres to NSN 6520-01-645-5701 technical specifications. Managed by the Department of Defense under the Medical Supply Chain FSH, the contract requires strict compliance with the Buy American Act and the Berry Amendment. The place of performance is located in Hampton, Virginia. Interested parties must note the response deadline of October 29, 2026, for this requirement categorized under NAICS code 423450.
Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

about 15 hours ago

DEADLINE

in 6 days
View Details
NAICS: 488410
New
DIBBS
Military-Grade Medical Packaging and Delivery Services
Motor Vehicle Towing

POSTED

about 15 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
Supply of Skedco Rescue Webbing Handles
Surgical Appliance and Supplies Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
Medical Oxygen Generator Connector SupplyThis subcontract involves the supply of medical oxygen generator connectors for prime contractors supporting DLA Troop Support Medical Supply Chain projects. The scope of work requires the manufacture or sourcing of connectors that strictly adhere to NSN 6530-01-585-9769 specifications, with the possibility of utilizing additive manufacturing provided that ESA approval is obtained. The contractor is responsible for ensuring all deliverables are medical-grade and meet rigorous Department of Defense standards, specifically regarding marking per MIL-STD-129 and palletization according to RP001 DLA Packaging Requirements. Performance for this contract is centered at Camp Lejeune, with the primary objective of delivering fully packaged and marked connectors to the Medical Supply Chain FSH.
Surgical and Medical Instrument Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 6 days
View Details
NAICS: 484220
New
DIBBS
Medical Equipment Freight and Delivery (FOB Destination)This subcontract involves the freight and delivery of medical and dental equipment for prime contractors supporting DLA Troop Support Medical Supply Chain FSH contracts. The service provider is responsible for transporting equipment FOB Destination to Hampton, Virginia, ensuring delivery is completed within five days of the order. The contractor must adhere to strict technical specifications, including palletization according to DLA RP001 and packaging standards per ASTM D3951. Additionally, all shipments must feature Medical Marking Standard No. 1 and be delivered with all required markings and packaging fully intact.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 15 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339114
New
DIBBS
Model 6200 Dental Operating Chair SupplyThis subcontract involves the supply of one Model 6200 Dental Operating Examination and Treatment Chair to support primes delivering DLA Troop Support Medical Supply Chain FSH contracts. The required unit must feature a power hydraulic base, a motor-driven pedestal, an adjustable headrest and armrest, and dual rotation locks allowing for 330-degree movement. Additionally, the chair must be equipped with fire-retardant upholstery and be delivered fully assembled and tested. The procurement is managed by the Department of Defense under the Medical Supply Chain FSH agency, with performance taking place in Hampton. Compliance with the Buy American Act and the Berry Amendment is mandatory for this requirement. Interested parties should note the response deadline of October 29, 2026, and the associated NAICS code 339114.
Dental Equipment and Supplies Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 6 days
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS