Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Annex and Utility Building Roof Canopies

Active
PR16138571Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The US Mission South Africa, through the General Services Office, is seeking qualified contractors with demonstrated experience in structural steel canopy construction to deliver and install approximately 225 square meters of steel roof canopies with Klip-Tite sheeting at the US Consulate on 1 Sandton Drive, Sandhurst, Johannesburg. The scope includes site establishment and restoration, security clearance for all personnel, adherence to OSH Act safety standards, temporary protection of existing equipment, removal or relocation of electrical systems, excavation and concrete breaking for column footings, fabrication and installation of a steel staircase, and full commissioning and handover of the completed works. Attendance at a mandatory site meeting on 12 August 2026 is required to receive the full scope of work and tender documents, and all interested firms must confirm attendance by 17:00 on 5 August 2026 via email with proof of ID and a single representative per company. Only contractors with prior structural steel projects valued above R500,000 are eligible to attend, and proof of past project completion must be provided with submissions. All bidders must be registered in the U.S. System for Award Management (SAM), with no tenders accepted without verified registration, and must comply with NDAA Section 889(a)(1)(B). Payment is strictly governed by U.S. Embassy policy: no advance payments are permitted, prices must be fixed to account for currency or material fluctuations, and payment will be made via EFT within 30 days of invoice submission and certified completion of work in two phases—once upon delivery and installation, and again upon 100% completion. Contractors are deemed to have waived any conflicting payment terms by submitting a quotation. The solicitation number is PR16138571, with a response deadline of 5 August 2026, and work is to be performed solely at the specified location in Johannesburg, Gauteng.

General Info

Contractor needed to install 225m² steel canopy with Klip-Tite at US Consulate Johannesburg, must have R500k+ steel project experience and SAM registration.

Agency

Department Of State → US Embassy PretoriaView Agency

NAICS

Place of Performance

Sandton, ZA-GT, 2000, ZAF

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhasePresolicitation
Posted

Presolicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of State → US Embassy Pretoria
Contacts2 people available
OfficeWASHINGTON, DC, 20520, USA
Organization / Agency
Department Of State → US Embassy Pretoria
View Agency Profile
Office AddressWASHINGTON, DC, 20520, USA

Full Description

Show more

EXPRESSION OF INTEREST - PR16138571: Annex and Utility Building Roof Canopies



The General Services Office (GSO) US Mission South Africa seeks to enter into a contract with qualified, reliable firms with sufficient resources, financing, and specific work experience related to STRUCTURAL STEEL canopy construction, for delivering and performing of services at US Consulate located on 1 Sandton Drive, Sandhurst, Johannesburg.


The scope of work includes, but not limited to the following.


  • Establishment of site for installation and removal thereof on completion
  • Embassy Security Clearance on all contractors personnel to execute work on premises.
  • Associated preparation, clearing, protection, safety, and reinstatement on completion.
  • Adherence to OSH Act and health and safety compliance
  • Temporary protection of and support to existing equipment and property
  • Removal or relocate of existing equipment, electrical cabling and DB’s where indicated
  • Measure, submit shop drawings and manufacturing of steel staircase
  • Breaking of reinforced concrete and excavation for column footings
  • Installation of approximately 225 m2 steel canopies with Klip-Tite" Sheeting complete as per drawing including crane facilities.
  • Commission and handover of site

A compulsory site meeting will be held at 1 Sandton Drive, Sandhurst, Johannesburg on Wednesday, 12 August 2026 @ 10h00 am during which brief the date and time of tender closure will be confirmed as well as the full Scope of Work and Tender documents be provided.


All interested contractors must confirm their attendance no later than COB (17H00), 5 August 2026 via email to Adriaan Joubert (joubertad@state.gov), and CC nagleym@state.gov.


Kindly provide the following on your confirmation of attendance.


  1. Reference Number RFQ Utility building steel canopies

  1. Full name of attendee with contact number (preferably only one representative per Company).
  2. Provide proof of ID at the site meeting.

Please ensure you get an e-mail receipt acknowledgement from us in return to ensure you are added onto the attendee list.


The following important requirements are applicable


  1. Only Contractors with specific structural steel construction experience with value above R 0.5 million may attend the site-meeting.
  2. Contractors are requested to bring their own measuring tape to the Site Meeting.
  3. Contractors will be required to provide proof and references of previous projects completed. Any Proposals received without this proof, will not be considered.

U.S Embassy payment terms:


i)          The US Embassy will make no provision for fluctuations in price or exchange rates after the order has been placed. If your price is dependent on these fluctuations, you MUST make provision for possible increases in your quoted price.


ii)         The U.S Embassy does not authorize Advance (deposit) payments.


  1. Payment will be made via EFT into the company’s bank account, within 30 days of delivery of goods/services and receipt of proper Invoice.

iv)        By submitting a Quotation, you are agreeing to waiver any payment terms that may be in contrast with the above.


  1. Payments for work completed will be done as follows.

  • Claim 1 as measured and certified on delivery to site of work completed and payable within 30 days of submission.
  • Claim 2 as measured and certified on 100 % completion of work and payable within 30 days of submission.


Compulsory SAM Registration


All tenderers must register with SAM - System for Award Management as part of the tender process.


Instructions are available on the U.S Embassy South Africa website. NO TENDERS WILL BE ACCEPTED WITHOUT PROOF OF REGISTRATION.  



U.S. National Defense Authorization Act (NDAA) Section 889(a)(1)(B)


Solicitation provision 52.240-90 in incorporated by reference. By submission of its offer, the offeror represents compliance.

More opportunities from Department Of State → US Embassy Pretoria

Same awarding agency

NAICS: 23822
Federal
Expression of interest - PR16122610 – Building Automation System (BAS).The U.S. Government, through the American Embassy in Pretoria, is seeking qualified contractors to replace and upgrade the existing Building Automation System (BAS) and associated HVAC controls at the embassy facility. The contractor must have the technical expertise and financial capacity to install a new system safely and efficiently, alongside providing comprehensive inventory, documentation, and reporting to the Office of Building Operations, the Building Engineer, and the Post Facility Maintenance Staff. Interested parties must submit their company profile and credentials by 28 July 2026 to the specified email addresses, with reference to solicitation number PR16122610. A mandatory site meeting is scheduled for 31 July 2026 at the embassy in Arcadia, Pretoria, and attendees must submit their identification details in advance. All proposals must comply with U.S. Government contracting requirements, including fixed pricing with no deposits or adjustments for currency fluctuations or market changes. Payment will be made via EFT within 30 calendar days after delivery and invoice receipt, subject to strict adherence to the Federal Acquisition Regulation and Department of State Acquisition Regulation clauses. Entities must be registered in the System for Award Management (SAM.gov) and provide their unique ID as part of the submission. Furthermore, contractors must affirm compliance with NDAA Section 889(a)(1)(B), which restricts the use of certain telecommunications and video surveillance equipment from specified foreign entities, and this requirement is incorporated by reference into the solicitation.

POSTED

11 days ago

DEADLINE

in 5 days
View Details
NAICS: 23611
Federal
RFP for a Construction project at a Government-owned property in Johannesburg, South AfricaThe U.S. Embassy Pretoria, under the Department of State, is soliciting proposals for an additions and alterations construction project at the U.S. Consulate located at 7 Trebyam Avenue, Edenburg, Sandton, Johannesburg, South Africa. The solicitation, numbered 19SF5026P0036 and issued as a presolicitation on June 23, 2026, has a response deadline of August 5, 2026, with no set-aside provisions applied. The project falls under NAICS code 23611 and requires compliance with South African construction standards, including SABS codes and National Building Regulations. Scope of work includes architectural finishes using Plascon or Dulux paints, off-shutter concrete ramps conforming to SABS 0155, and KlipLok steel roofing with four trapezoidal ribs at 233mm centers. Electrical systems must adhere to SANS IEC 61439-1, SANS IEC 61441, and SANS 10142-1, with lighting, power, and small power layouts based on provided drawings. Plumbing requires accessible waste pipes with inspection eyes at all bends and junctions, and soil pipes beneath the building must be encased in a minimum of 150mm concrete. All materials, including clay bricks (SABS 227: Class FBX, 17 MPa minimum), cement (SABS ENV 197-1, class 32.5), and sand (SABS 1090 internal type), must meet specified standards. Ceilings and partitions must be rodent-proof according to government regulations. Surface preparation demands thorough inspection and cleaning of plastered surfaces before painting, and moisture content must be verified with a Doser hygrometer at 8% or less on the BD 2 scale. Contractors are required to verify all on-site dimensions and levels prior to commencing work and must obtain written approval from the Architect for any contract variations. Technical documentation includes architectural, structural, and electrical drawings detailing finishes, systems, and schedules. Submission must acknowledge receipt of amendments via completed forms, marked copies of the offer, or explicit communication referencing the solicitation and amendment number, with failure to do so risking offer rejection. The contract value and period of performance are not specified, nor are details on payment office, contracting officer representative, or insurance requirements

POSTED

about 1 month ago

DEADLINE

in 13 days
View Details
NAICS: 238140
Federal
Architectural Finishes and BrickworkThe contract pertains to architectural finishes and brickwork, specifically the installation of clay brick infill meeting SABS 227: FBX standards with a compressive strength of 17 MPa, alongside the application of cement plaster utilizing SABS 32.5 cement and internal plaster sand. The work is scoped to ensure compliance with South African Bureau of Standards specifications for material quality and performance, focusing on durable and structurally sound finishes within the designated place of performance in Johannesburg. The subcontract requires adherence to technical standards for both masonry and plastering operations, demanding precision in material selection and execution to meet the required engineering and aesthetic criteria. This subcontract is issued by the US Embassy Pretoria under the Department of State, with a posting date of June 22, 2026, and a firm response deadline of August 5, 2026, at 9:00 PM. Classified under NAICS code 238140 for masonry contractors, the opportunity is open to qualified subcontractors capable of delivering high-quality, standards-compliant finishes for diplomatic facilities. Performance is expected to be completed at the location in Johannesburg, and bidders must demonstrate capability in sourcing approved materials and executing skilled installation work under strict quality control measures. There is no specified set-aside classification, and the contract is open to eligible participants meeting the technical and compliance requirements.
Masonry Contractors

POSTED

about 1 month ago

DEADLINE

in 13 days
View Details