Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

This Government Contract opportunity from Government of Canada was posted on June 1, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Annual Preventive Maintenance for Revolving Doors

Closed
International

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 238290
New
Centennial JCC Panic Hardware Services (Electrical Room Egress Doors)
Solicitation # Panic Hardware (Electrical Room Egress Doors)
Management & Training Corporation is soliciting bids for the installation of commercial-grade panic hardware on electrical room egress doors at the Centennial Job Corps Center in Nampa, Idaho. The project encompasses five specific locations: the Cafeteria, Men's Dorm, Women's Dorm, Recreation area, and Vocational building. The selected contractor must conduct a site survey to verify door dimensions and fire ratings, supply Grade I heavy-duty panic bars with matching exterior trim and closers, and perform at least ten consecutive cycle tests to ensure fail-safe operation. All work must strictly adhere to NEC 2023 Article 110.26(C)(3), NFPA 101 Life Safety Code, and Americans with Disabilities Act standards. This is a fee-for-service subcontracting opportunity set aside for small businesses, including certified VOSB, SDVOSB, WOSB, and HUBZone entities. Bidders are required to submit a lump sum price for the entire project along with individual pricing per deficiency by December 1, 2026. Required submission documents include a completed bid sheet, a supplier self-certification packet with a W-9, three references for similar projects, and an SBA certification letter if applicable. Awardees must provide proof of insurance and comply with federal regulations, including the Davis-Bacon Act prevailing wage rates for Canyon and Gem Counties, as well as various FAR clauses regarding security, whistleblower rights, and the prohibition of certain foreign purchases.
Management & Training Corporation/Centennial Job Corps Center

POSTED

about 8 hours ago

DEADLINE

in about 1 month
NAICS: 238290
New
Federal
Z--ID- KOOSKIA NFH-OVERHEAD DOOR REPLACE
Solicitation # 140FF027Q0033
The U.S. Fish and Wildlife Service is conducting market research via a Sources Sought Synopsis for the replacement of three roll-up garage doors at the Kooskia National Fish Hatchery in Kooskia, Idaho. The project involves the demolition and disposal of existing doors and the installation of three new sectional overhead doors, including one approximately 8' 4" x 8' 7" and two approximately 10' 2" x 10' 1". Additionally, the scope requires the installation of two 120vac electric door operators and general preventative maintenance for up to ten additional roll-up garage doors. The resulting contract is intended to be a Firm-Fixed-Price award with a performance period of 60 days, specifically scheduled from November 30, 2026, through December 30, 2026. This opportunity is designated as a total Small Business Set Aside under NAICS code 238290. Interested firms must submit a response by November 6, 2026, providing their CAGE code, UEI, and evidence of capability through up to three similar projects completed within the last five years. A mandatory site visit is required for all bidders to verify measurements and existing conditions. Final acceptance of the work will be based on compliance with the Statement of Work, verified functionality of the doors and electric operators, and complete site cleanup. All responses should be submitted electronically to the Contracting Officer, Cindy Salazar.
Fws Contracting Activity

POSTED

about 19 hours ago

DEADLINE

in 10 days
NAICS: 238290
New
SLED
SMDOT Elevator Maintenance
Solicitation # 12701633
The City of Santa Monica, through the D600 Department of Transportation (SaMoDOT), is soliciting proposals for turnkey maintenance, inspection, and repair services for three hydraulic elevators located at 1620 6th Street. The equipment includes one Independent model AAK137, one Montgomery model AA2986, and one Otis model AEP227. The selected contractor must provide monthly systemic maintenance, a dedicated maintenance supervisor for safety surveys, and 24/7 emergency callback services with a one-hour response time. All parts must be new, conform to Original Equipment Manufacturer standards, and be stocked in a local warehouse. The award will be granted to the best bidder based on a variety of factors, including the technical experience of key personnel, financial resources, and the ability to provide future service, rather than solely on the lowest price. Bidders must comply with Title II of the ADA, the Living Wage Ordinance, and Labor Code Section 1773.2 regarding prevailing wages. A payment bond is required for awards exceeding 25,000 dollars, and the City requires a certificate of insurance naming them as an additional insured. Proposals must be submitted electronically via the OpenGov portal by November 9, 2026, at 3:00pm. The contract includes a ten-day written notice period for termination without cause and requires notification of force majeure events within 24 hours.
D600 DEPT OF TRANSPORTATION - SaMoDOT

POSTED

1 day ago

DEADLINE

in 13 days
NAICS: 238290
New
SLED
RFP 902787 Elevator Condition Assessment & Modernization Plan
Solicitation # 902787
The Alameda County General Services Agency Building Maintenance Department is soliciting proposals for a turnkey professional services contract to perform comprehensive condition assessments and develop modernization plans for elevator equipment at three Oakland, California locations: 1106 Madison Street, 1111 Jackson Street, and 1401 Lakeside Drive. The project encompasses a total of nine elevators, including Otis hydroelectric and overhead traction models, as well as US Elevator overhead traction units. The scope of work is divided into six phases, beginning with baseline scheduling and condition assessment reports, moving through the preparation of bid-ready modernization specifications and procurement support, and concluding with construction oversight and warranty period inspections. Qualified consulting firms must demonstrate at least five years of relevant experience, and staff performing the work must hold a current National Association of Elevator Safety Authorities International Qualified Elevator Inspector certification. As a public works project, all contractors must be registered with the California Department of Industrial Relations and adhere to prevailing wage and apprenticeship requirements. Proposals will be evaluated based on a maximum of 550 points, with a heavy emphasis on the description of proposed services and relevant experience over cost. Preference may be given to certified Small and Local Emerging Businesses. The awarded contractor will be ineligible to bid on any subsequent solicitations resulting from this assessment.
General Services Agency-Procurement

POSTED

1 day ago

DEADLINE

in 21 days

AI Contract Overview

Show more

The contract requires annual preventive maintenance services for C.J. Rush-brand revolving doors equipped with electronic access control systems. Scope of work includes comprehensive inspections, lubrication, mechanical and electrical functionality checks, and necessary performance adjustments to ensure optimal operation and safety. All tasks must be performed annually to maintain system reliability and compliance with operational standards. The contract is classified under NAICS code 238290 and is issued as a subcontract by the Canadian Space Agency, a division of the Government of Canada. The place of performance is specifically located in Longueuil, and responses are due by June 16, 2026. The solicitation was posted on June 1, 2026, and bidders must submit their proposals before the deadline. The agreement is part of the Government of Canada’s procurement process, with no set-aside provisions indicated.

General Info

Annual preventive maintenance for C.J. Rush revolving doors at Canadian Space Agency, Longueuil facility.

Documents

This scope was carved out of 9F030 - 20240442.

The full solicitation package (5 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Contractor to maintain the revolving and swinging doors at the John H. Chapman Space Centre

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyGovernment of Canada → Canadian Space Agency
ContactsNo contacts available
OfficeN/A
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Perform annual inspections, lubrication, mechanical and electrical checks, and performance adjustments on C.J. Rush-brand revolving doors with electronic access control.

More opportunities from Government of Canada → Canadian Space Agency

Same awarding agency

NAICS: 927110
International
Enabling Technology for Future Missions
Solicitation # 9F063-20260085
The Canadian Space Agency (CSA) is soliciting proposals under solicitation number 9F063-20260085 for the development of one to three enabling technologies to support future space missions. The primary objective is to advance strategic technologies to reduce technical uncertainties and support the implementation of future Canadian space activities. A specific focus of this effort is the maturation of a lightweight, athermal reflecting telescope capability to Technology Readiness Level (TRL) 5. This includes the delivery of a reflecting telescope brassboard validated for Low Earth Orbit (LEO) vibration and thermal-vacuum environments, intended for Earth Observation imaging payloads on CubeSats of 4U or larger, with the telescope itself being 2U or less. Key performance targets include a Ground Sampling Distance of less than 7 metres and a swath width greater than 5 km. The project is planned for a duration of 16 months, structured around five key milestones: a Kick-off meeting, Preliminary Design Review, Detailed Design Review/Work Authorization Meeting, Test Readiness Review, and a Final Review meeting. Deliverables include the hardware brassboard, CAD and performance analysis models, software, and a Technology Roadmap for advancing to TRL 6-8. This solicitation is restricted to Canadian suppliers. Awards will be based on the highest combined rating of technical merit (60 percent) and price (40 percent), with a minimum technical score of 70 points required for consideration. The procurement process includes strict requirements for security clearances, intellectual property disclosure, and adherence to environmentally preferable packaging standards.
Space Research and Technology

POSTED

9 days ago

DEADLINE

in 30 days
View Details
NAICS: 541380
International
OSIRIS-REx Lab Organic and Inorganic Analyses Monitoring
Solicitation # 9F012-20250210
The Canadian Space Agency (CSA) is seeking specialized services for monitoring organic and inorganic contamination in laboratories and clean rooms used for the curation of astromaterials from the OSIRIS-REx mission. This effort is critical to preparing for the arrival of Canada's portion of the asteroid sample, ensuring that contamination monitoring is scientifically equivalent to the standards employed by NASA and JAXA. The scope of work includes the analysis of silicon wafers and absorbent tubes using vapour phase decomposition inductively coupled plasma mass spectrometry (VPD-ICP-MS) for trace metals and thermal desorption gas chromatography-mass spectrometry (TD-GC-MS) for organic compounds in both wafers and air. The contractor is responsible for providing sampling kits, including 200 mm diameter bare silicon wafers, absorbent tubes, transport blanks, and necessary accessories such as stands, tweezers, and pumps, all shipped in a manner that minimizes contaminants. This procurement is issued as an Advance Contract Award Notice (ACAN) with Balazs NanoAnalysis identified as the pre-identified supplier due to the highly specialized technical requirements. The contract is estimated to run until March 31, 2027, with potential extensions to March 31, 2030. Mandatory requirements for the supplier include ISO/IEC 17025:2017 and ISO 9001:2015 certifications, as well as demonstrated experience with ISO 14644 standards for ISO 5 cleanrooms and ITRS and SEMI guidelines for witness wafer analysis. Organic compound analysis for wafers must specifically follow the SEMI MF 1982-1103 Method-B procedure. Canada intends to retain ownership of any foreground intellectual property generated under this contract.
Testing Laboratories and Services

POSTED

9 days ago

DEADLINE

in 7 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS