Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

As-Built Documentation and Technical Drawing Services

Active

Federal

Response Deadline08/19/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract seeks the preparation and delivery of as-built drawings that accurately reflect the final configurations of a security or surveillance system, including the precise locations of cameras, routing of all cabling, installation paths of conduit, and placement of related equipment. These drawings must capture the complete and verified post-installation state of the infrastructure to support maintenance, future modifications, and compliance verification. The work is classified under NAICS code 541330, indicating it falls within architectural, engineering, and related services, and is issued as a subcontract under the Department of Defense, specifically managed by FA4427 60 Cons Lgc. Performance is required to be completed at a location identified by zip code 94535, and proposals must be submitted by August 19, 2026, at 7:00 PM. The solicitation was posted on August 4, 2026, and all bids are expected to meet technical standards ensuring accuracy and clarity of documentation.

General Info

Prepare and deliver accurate as-built drawings of security system infrastructure by August 19, 2026, at 94535 location.

Agency

Department Of Defense → FA4427 60 Cons LgcView Agency

NAICS

541330 - Engineering ServicesView NAICS

Place of Performance

0, CA, 94535, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 4

subcontract

Response DeadlineAug 19

Submission deadline

Response Deadline

08/19/2026, 07:00:00 PM UTCin 14 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → FA4427 60 Cons Lgc

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → FA4427 60 Cons Lgc

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Preparation and delivery of as-built drawings showing final camera locations, cabling paths, conduit runs, and equipment placements.

Similar Contracts

Same NAICS industry code

Quality Inspection and Acceptance Support

ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

Item Unique Identification (IUID) Marking Services

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 9 hours ago

DEADLINE

Quality Inspection and Sampling Services

ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

Technical Data Package (TDP) and Drawing Compliance SupportThe contract requires engineering and documentation support to ensure full compliance with Technical Data Package (TDP) standards, military drawings, QPL-2939-26, and Contract Data Requirements List (CDRL) specifications. The scope centers on providing technical expertise to align design and manufacturing processes with mandated defense documentation and quality control criteria, ensuring all deliverables meet stringent military and regulatory requirements. This support is critical for maintaining consistency, traceability, and audit readiness across the production lifecycle. The work is to be performed in San Diego, California, at a specified ZIP code, and is classified as a subcontract under NAICS code 541330, which corresponds to engineering services. The solicitation was posted on August 5, 2026, with responses due by August 17, 2026. The contracting entity is the Department of Defense under the Construction & Equipment MRO SVC I agency, indicating this effort supports military maintenance, repair, and overhaul operations. All deliverables must adhere strictly to the defined technical and procedural standards to ensure interoperability and regulatory compliance.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 9 hours ago

DEADLINE

Quality Assurance and Testing ServicesThe contract requires independent quality assurance services, first article testing, and lot sampling conducted in accordance with MIL-STD-1916 and Contract Data Requirements List (CDRL) specifications, ensuring all deliverables meet federal defense standards. The work involves comprehensive documentation and reporting directly to the prime contractor, with a focus on rigorous inspection protocols and compliance verification throughout the production lifecycle. All activities must align with the technical and procedural requirements defined by the Department of Defense. Performance is obligated at a designated location in San Diego, California, with a firm response deadline of August 17, 2026, and the solicitation issued under NAICS code 541330 for engineering services. The contract is classified as a subcontract, positioned within the broader Construction & Equipment MRO SVC I procurement framework, and is intended to support defense-related maintenance, repair, and overhaul operations. The offering entity must demonstrate capability to execute testing and quality control functions under strict defense contracting mandates, with timely and accurate reporting a non-negotiable component of compliance.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 9 hours ago

DEADLINE

Technical Documentation and Source Approval (SAR) SupportThe contract involves the preparation and submission of Source Approval Request documentation to the Defense Logistics Agency, requiring comprehensive technical data, quality plans, and strict adherence to RC001 and Sikorsky standards. All deliverables must align with established industry and military specifications to ensure supplier qualification and compliance across the supply chain. The work is performed under a subcontract arrangement, focused entirely on supporting the approval process for critical components or systems used in defense applications. The opportunity is issued by the ASC SUPPLIER OPER OEM DIVISION under the Department of Defense, with performance required at Cherry Point, North Carolina, 28533-5040. The solicitation was posted on August 5, 2026, and responses are due by August 13, 2026. The NAICS code 541330 indicates this falls under engineering services, reflecting the technical and procedural rigor involved. Interested parties must address all requirements outlined in the solicitation, including format, completeness, and regulatory alignment, to be considered for award.

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 9 hours ago

DEADLINE

First Article Test (FAT) and Government Testing SupportThe contract requires comprehensive engineering and technical support for First Article Testing (FAT) to ensure compliance with government standards and procedures outlined under FAR 52.209-4. This includes developing detailed test plans, preparing and managing all associated documentation, and coordinating directly with government representatives to facilitate timely and accurate evaluation of first articles. The work demands a high level of technical expertise and attention to regulatory requirements, with the goal of validating conformance before full-scale production begins. This is a small business set-aside subcontract under NAICS code 541330, designated for total small business participation as defined by SBA regulations. Performance is required at Robins Air Force Base, Georgia, with a response deadline of August 13, 2026, and the solicitation was posted on August 5, 2026. The contracting entity operates under the Department of Defense, specifically the ASC SUPPLIER OPER AE AND AF DIV, and the work will involve close collaboration with federal personnel to meet stringent quality and compliance objectives for defense-related systems.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 9 hours ago

DEADLINE

Quality Assurance and Inspection Services

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 9 hours ago

DEADLINE

First Article Testing (FAT) and Engineering SupportThe contract requires execution and documentation of First Article Testing for self-locking nuts in accordance with military standards, ensuring all test data, material certifications, and dimensional reports are accurately compiled and submitted to the government’s ESA. The work must conform to strict technical specifications and verification protocols to validate that the initial production units meet required performance and quality benchmarks before full-scale manufacturing proceeds. The place of performance is designated as New Cumberland, PA, with the contracting office operating under the ASC Commodities Division of the Department of Defense. This is a subcontract opportunity under NAICS code 541330, with a response deadline of August 13, 2026, and posting date of August 5, 2026. While the solicitation number is not provided, the official interface for details and submissions is accessible via the DIBBS platform. There is no set-aside designation specified, and the contract does not indicate a point of contact, suggesting interested parties should reference the provided link for further submission instructions and technical requirements. All deliverables must be complete, traceable, and compliant with federal defense acquisition standards.

ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

Quality Assurance and Inspection Services

ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

Cybersecurity Monitoring Services

DLA DIST SAN JOAQUIN

POSTED

about 9 hours ago

DEADLINE

Quality Inspection and Testing Services

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 9 hours ago

DEADLINE

More opportunities from Department Of Defense → FA4427 60 Cons Lgc

Same awarding agency

User Manuals and Warranty Documentation DevelopmentThe contract requires the development and delivery of comprehensive user manuals and warranty documentation for all installed CCTV components, including cameras, network video recorders, software systems, and associated cabling. The deliverables must be clear, technically accurate, and tailored to end-user needs, ensuring proper installation, operation, maintenance, and warranty claims for each component. The work is structured as a subcontract under NAICS code 541990 and is associated with the Department of Defense, specifically the FA4427 60 Cons Lgc organization, with performance required at a location in 94535. The solicitation was posted on August 4, 2026, and responses are due by August 19, 2026, at 7:00 PM. No set-aside designation applies, and the contract is open to qualified subcontractors who can meet the technical and documentation standards for defense-related surveillance systems.

All Other Professional, Scientific, and Technical Services

POSTED

DEADLINE

On-Site Training Delivery for Security PersonnelThe contract requires on-site training delivery to the 60th Security Forces Squadron focused on camera operation, user interface navigation, video export protocols, and troubleshooting procedures for surveillance systems. Training must be conducted at the location with zip code 94535, ensuring personnel are thoroughly proficient in using the equipment and resolving common operational issues. The task is structured as a subcontract under NAICS code 611430, indicating an educational and training services classification, and is issued by the Department of Defense through the FA4427 60 Cons Lgc office. Interested parties must submit responses by August 19, 2026, at 7:00 PM, with the solicitation posted on August 4, 2026, and no set-aside provisions specified.

Professional and Management Development Training

POSTED

DEADLINE

Structured Cabling and Conduit InstallationThe contract entails the installation of Cat6 and Cat6A data cabling systems along with associated conduits, grounding, and raceways specifically designed to support camera surveillance infrastructure. Work includes all necessary components for secure and reliable data transmission between the Video Control Center and the communications room, with special attention to weatherproofing exterior cable runs exposed to environmental conditions. The scope requires full compliance with industry standards for structured cabling to ensure optimal performance, signal integrity, and long-term durability in both interior and exterior environments. The contract is classified under NAICS code 238210 for Electrical and Other Wiring Installation Contractors and is issued as a subcontract by the Department of Defense under the agency designation FA4427 60 Cons Lgc. The place of performance is located in an area with zip code 94535, indicating the project will occur at a specified military or federal facility within that region. The solicitation was posted on August 4, 2026, with proposals due by August 19, 2026, at 7:00 PM local time, and all work must be completed in alignment with the technical and environmental specifications outlined in the requirements.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

IP-Based CCTV System Installation and IntegrationThe contract entails the full engineering, furnishing, installation, configuration, and testing of an IP-based closed-circuit television system at Travis Air Force Base’s Visitor Control Center, with mandatory integration into Advantor Systems’ IBDSS platform to ensure seamless surveillance and access control functionality. The work must comply with all military security standards and be completed at the specified location in California, ZIP code 94535, with delivery and performance expectations aligned to defense-grade operational requirements. All equipment and system components must be new, certified, and fully compatible with the existing IBDSS infrastructure to enable real-time monitoring, recording, and联动 response capabilities without disruption to current security protocols. The solicitation is classified as a subcontract under NAICS code 334290, targeting firms with proven expertise in security system integration and defense-related installations. The opportunity was posted on August 4, 2026, with a firm deadline for responses set for August 19, 2026, at 7:00 PM, and is managed by the Department of Defense under the contracting office FA4427 60 Cons Lgc. The system must be operational and fully tested prior to acceptance, and contractors are expected to provide comprehensive documentation, training, and ongoing technical support to ensure sustained system integrity and compliance with Air Force security directives. Participation requires prior experience with federal installations and familiarity with secure, networked surveillance environments.

Other Communications Equipment Manufacturing

POSTED

DEADLINE

Warranty and Post-Delivery Support ServicesThis contract outlines a 12-month commercial warranty for mannequin components, requiring the contractor to provide repair or replacement of any defective parts during the warranty period. The scope includes potential technical support and logistics coordination to ensure timely resolution of issues, maintaining product functionality and customer satisfaction. The agreement is structured as a subcontract under a Small Business Set Aside, with the North American Industry Classification System code 811490, indicating it falls under miscellaneous repair and maintenance services. Performance is expected to be carried out at a location with a zip code of 94535, and the solicitation, posted on August 4, 2026, requires responses by August 11, 2026. The contract is administered by the Department of Defense under the office designation FA4427 60 Cons Lgc, with no designated point of contact listed publicly.

Other Personal and Household Goods Repair and Maintenance

POSTED

DEADLINE

Custom Sizing and Dimensional Compliance ServicesThe contract calls for specialized custom measurement and sizing services tailored to meet the exacting dimensional standards required by museums and the Air Force for conservation forms, ensuring precise compliance with institutional and military specifications. The work involves direct coordination with curatorial staff to align physical dimensions with preservation protocols, requiring both technical accuracy and institutional awareness. All services must be performed in accordance with the place of performance located in 94535, with the contractor expected to operate under the Small Business Set Aside designation, reserving eligibility exclusively for qualified small businesses. The North American Industry Classification System code 541330 indicates the work falls under architectural, engineering, and related services, underscoring the technical and professional nature of the deliverables. Solicitation closed on August 11, 2026, with proposals due by 7:00 PM ET, and the contracting entity operates under the Department of Defense through the FA4427 60 Cons Lgc office.

Engineering Services

POSTED

DEADLINE

Supply of Seated Male Conservation Forms (Dorfman #4160 or Equal)The contract calls for the manufacture and supply of five seated male conservation forms designed for museum or archival conservation use, featuring flexible cable joints at the waist, elbows, wrists, hips, and knees to allow for adjustable posing while maintaining structural integrity. These forms must be compatible with existing conservation heads and constructed using Ethafoam and polyester stockinette materials to ensure durability, lightness, and archival safety. The specification requires strict adherence to the Dorfman #4160 model or an acceptable equivalent, ensuring consistency in quality and functionality across conservation practices. All items must be delivered to a performance location with a ZIP code of 94535, likely a Department of Defense conservation or storage facility. This is a Small Business Set Aside under the SBA program, meaning only qualified small businesses may submit bids, and it is classified under NAICS code 339999 for other miscellaneous manufacturing. The contract is structured as a subcontract and was posted on August 4, 2026, with a response deadline of August 11, 2026, at 7:00 PM. The awarding agency is FA4427 60 Cons Lgc, operating under the Department of Defense, though no specific point of contact or full address details are provided. Interested vendors must ensure compliance with material specifications, joint functionality, and compatibility requirements to meet the conservation standards expected by the agency.

All Other Miscellaneous Manufacturing

POSTED

DEADLINE

Supply of Standing Male Conservation Forms (Dorfman #4100 or Equal)The contract outlines the manufacture and supply of eight standing male conservation forms designed for museological and conservation use, featuring a posable waist for dynamic positioning, adjustable body dimensions to accommodate varying display needs, and integrated heel plate tubing for secure stabilization. These forms are constructed from Ethafoam and polyester stockinette, materials chosen for their durability, archival safety, and compatibility with delicate artifacts. Each form must be fully compatible with conservation heads, ensuring seamless integration within existing museum display and handling systems. The specification explicitly permits equivalent alternatives to the Dorfman #4100 model, allowing qualified bidders to propose technically equivalent solutions. This is a Small Business Set Aside subcontract under the NAICS code 339999, reserved exclusively for small businesses, and is issued by the Department of Defense through the FA4427 60 Cons Lgc office. The solicitation was posted on August 4, 2026, with responses due by August 11, 2026, at 7:00 PM. The place of performance is designated as a location with ZIP code 94535, indicating the primary delivery point, though no specific city or state is provided. The contract is part of a broader effort to supply specialized conservation tools to support the preservation of cultural and historical artifacts within defense-managed collections.

All Other Miscellaneous Manufacturing

POSTED

DEADLINE

Supply of Articulated Conservation Hands (Dorfman #5155 or Equal)The contract requires the manufacture and supply of six pairs of articulated conservation hands for use in museum artifact displays, constructed with Ethafoam, an anodized aluminum frame, bendable finger wires, and white polyester stockinette covering to ensure both durability and museum-quality aesthetics. These hands are intended for precise, non-invasive support of delicate historical objects, with specifications allowing for substitution of equally compliant designs if not using the referenced Dorfman #5155 model. The solicitation is structured as a subcontract under a Small Business Set Aside, specifically reserved for small businesses, with the NAICS code 339999 indicating it falls under miscellaneous manufacturing. Performance is expected to be carried out at a location with a zip code of 94535, though the exact city and state are not specified. The response deadline is August 11, 2026, and the contract notice was posted on August 4, 2026, under the Department of Defense’s FA4427 60 Cons Lgc office.

All Other Miscellaneous Manufacturing

POSTED

DEADLINE

Bluesky AL2 Lift Series Mast Systems, Travis AFB CA

Solicitation # FA442726Q1117

Travis Air Force Base is soliciting four BlueSky AL2 Lift Series Mast Systems with part number BSM2-W-L215-AL2-00 under a brand name or equal requirement, with detailed specifications provided in an attached document. This solicitation, identified as FA442726Q1117, is issued under the Revolutionary Federal Acquisition Regulation Overhaul Parts 5 and 12 and represents the sole governing document for the procurement, supplemented only by information in this notice. The requirement is set aside exclusively for small businesses, classified under NAICS code 334220, and is managed by the Department of Defense through the 60 Cons Lgc office located at Travis AFB, California. All responses must be submitted via email to juliet.diggs.1@us.af.mil and clark.teninty.1@us.af.mil no later than 12:00 PM PDT on August 13, 2026. The point of contact for inquiries is Clark Teninty, with Juliet Diggs as the secondary contact, and performance will occur at the Travis AFB location with a ZIP code of 94535.

Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

DEADLINE

Ground Transportation Car Wash Design-Build Replacement. Travis AFB, CA

Solicitation # FA442726Q1103

The 60th Logistics Readiness Squadron at Travis Air Force Base is soliciting a firm-fixed-price design-build replacement of the legacy ground transportation car wash system in Facility 129, with a total performance period of 30 days beginning 60 days after award. The contractor is responsible for decommissioning the existing system, furnishing and installing a new commercial-grade, touchless car wash system that complies with OEM specifications, integrating all necessary utility and power infrastructure, and delivering hands-on operational training to at least 10 Ground Transportation personnel. The system must accommodate vehicles up to 14 feet high and 10 feet wide, be manufactured no more than one year prior to delivery, and have been in commercial use for at least two years or 6,000 field hours. All equipment must be new, with no refurbished or used items permitted, and must be rated for operation in temperature ranges of 32°F to 140°F and humidity levels up to 95% non-condensing. The contractor must submit a detailed PDF floor plan prior to installation, verifying proper fit within the facility’s structural envelope, and must demonstrate at least three years of successful car wash maintenance experience with documentation of three similar prior installations. Key personnel, including a designated contract manager and alternate, must be identified and available during standard business hours, and all contractor employees must clearly identify themselves as such when interacting with government personnel. This solicitation is a total small business set-aside under NAICS code 423850, requiring offerors to certify their small business status and applicable socioeconomic categories. All proposals must be submitted electronically by 1:00 p.m. PDT on August 13, 2026, to the designated points of contact, and must include Attachment 2 (Contractor Responsibility Verification), Attachment 3 (Past Performance List of References), and adherence to the Statement of Work. Evaluation follows a Lowest Price Technically Acceptable (LPTA) process, where price is prioritized, but technical acceptability and past performance serve as mandatory pass/fail gates: only technically acceptable offers with acceptable past performance will be considered, with award going to the lowest-priced acceptable offer. Compliance with stringent DoD and federal regulations is required, including FAR and DFARS clauses covering cyber readiness, small business subcontracting, Buy American provisions, prohibitions on materials from Xinjiang and Maduro-regime entities, child labor certification, service contract labor standards, and cybersecurity maturity model certification.

Service Establishment Equipment and Supplies Merchant Wholesalers

POSTED

DEADLINE

Conservation Forms (Mannequins) - Travis AFB Aviation Museum

Solicitation # FA442726QZ070

The 60th Contracting Squadron at Travis Air Force Base is conducting a sources sought notice to gather market research for a future Firm Fixed Price contract to procure Conservation Forms, commonly referred to as mannequins, for the Travis Air Force Base Aviation Museum. This initiative is slated to be a 100% Total Small Business Set-Aside under NAICS code 339999, ensuring that only qualified small businesses are eligible to respond. Detailed specifications, including the exact types and quantities of mannequins required, are outlined in attached documents, which vendors must review to ensure compliance with the government’s technical and functional needs. The solicitation for this requirement is expected to be formally issued in the coming weeks, with the current notice serving solely to inform and engage potential small business vendors. Interested parties must submit their responses via email to both point of contacts, Tsgt Zephaniah Valdez and Lt Samuel De La Cruz, no later than 12:00 PM Pacific Time on August 11, 2026. Responses should be comprehensive and address the requirements detailed in the attached Statement of Work and salient characteristics. The contract will be administered by the Department of Defense through the FA4427 60 Cons Lgc office located at Travis Air Force Base, California, with performance occurring at the same location. This opportunity is open exclusively to small businesses and is part of a broader effort by the Air Force to enhance museum preservation standards using specialized conservation equipment.

All Other Miscellaneous Manufacturing

POSTED

DEADLINE