Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 14 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Assembly and Calibration of Laser Scanner into Coordinate Measurement Machine (CMM)

Active

Federal

Response Deadline10/15/2026, 12:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

General Info

Agency

National Aeronautics And Space Administration → NASA Shared Services Center

NAICS

811210 - Electronic and Precision Equipment Repair and Maintenance

Place of Performance

Hampton, VA, 23681, USA

Set-Aside

NONE

Documents

This scope was carved out of 80NSSC27946122Q.

The full solicitation package (3 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

HEXAGON HP-L-10.10 Laser Scanner Purchase

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 13

subcontract

Response DeadlineOct 15

Submission deadline

Response Deadline

10/15/2026, 12:00:00 PM UTCin 1 day

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyNational Aeronautics And Space Administration → NASA Shared Services Center

ContactsNo contacts available

OfficeN/A

Organization / AgencyNational Aeronautics And Space Administration → NASA Shared Services Center

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs physical assembly and OEM-certified calibration for prime contractors on NASA Langley Research Center metrology projects. Integrates HP-L-10.10 systems into new CMMs, configures PC-DMIS environments, and applies OEM calibration codes. Requires Hexagon authorized personnel and access to encrypted license keys at the North Kingstown, RI facility. Delivers a fully assembled and operational CMM.

Similar Contracts

Same NAICS industry code

Octet RH96 Instrument Verification and Preventive Maintenance

National Institutes Of Health Olao

POSTED

about 13 hours ago

DEADLINE

Radiation Dose Calibration and Compliance Auditing

Network Contract Office 19 (36C259)

POSTED

about 13 hours ago

DEADLINE

OCTET RH96 PREVENTIVE SERVICE PLAN FOR SARTORIUS OCTET INSTRUMENTS

Solicitation # NIAID-NOI-27-2309693

The National Institute of Allergy and Infectious Diseases (NIAID) of the National Institutes of Health (NIH) intends to award a sole source, firm-fixed-price purchase order to Sartorius Corporation for verification services and a 12-month preventive service plan for three Octet RH96 instruments. The scope of work includes three 2nd Hand Instrument Verification services—consisting of performance checks, power-on checks, device log reviews, and software license checks—followed by a one-year service plan. This plan provides parts and labor for break/fix events, software upgrades, and two scheduled onsite preventive maintenance visits per instrument annually. All services will be performed at the Vaccine Research Center in Bethesda, Maryland, with a period of performance from December 1, 2026, through November 30, 2027. The government has identified Sartorius Corporation as the only responsible source capable of meeting the requirement because OEM-authorized service support is mandatory. This ensures the use of factory-trained engineers and original spare parts to maintain instrument reliability and research data reproducibility. The acquisition falls under NAICS code 811210 for Other Electronic and Precision Equipment Repair and Maintenance. While the government intends to negotiate with Sartorius, other firms may submit capability statements and past performance documentation within 15 days of the notice to contest the sole source determination. All work must comply with NIH/HHS facility access requirements and NIH IT security policies.

National Institutes Of Health Olao

POSTED

about 13 hours ago

DEADLINE

Steris Sterilizer Maintenance/Service at Offutt AFB, NE

Solicitation # HT940726Q0001

The Defense Health Agency Contracting Activity Central Division is soliciting quotations for a single-award, Firm-Fixed-Price commercial service contract to provide comprehensive maintenance and repair services for Government-owned Steris sterilization and washer equipment. Located at the 55th Medical Group, Ehrling Bergquist Clinic at Offutt Air Force Base, Nebraska, the scope of work includes scheduled preventive maintenance, safety inspections, calibrations, annual chamber cleanings, and unscheduled emergency repairs. Covered equipment consists of three Steris AMSCO 400 Steam Sterilizers, one Steris Reliance Vision Single Chamber Washer Disinfector, two Steris AMSCO 7052HP Single Chamber Washer Disinfectors, and two Steris IWECO5 Ultrasonic Instrument Washers. All services must be performed by certified technicians using genuine Original Equipment Manufacturer parts and software. This procurement is a 100 percent Total Small Business Set-Aside under NAICS codes 811210 and 811211. The anticipated period of performance includes a 12-month base period, four 12-month option periods, and a potential six-month extension, running from November 1, 2026, through April 30, 2032. Award will be determined using the Lowest Price Technically Acceptable method, evaluating the total price across the base, all option years, and the extension. Technical acceptability is based on the contractor's personnel qualifications, OEM access, technical resources, and parts capability. Key performance standards include a 4-hour telephone response time, on-site arrival within 48 business hours for unscheduled repairs, and a minimum monthly equipment uptime of 95 percent.

Defense Health Agency

POSTED

about 13 hours ago

DEADLINE

Service Maintenance for MoFlo Astrio AW10012

Solicitation # 75N98027Q00006

National Institutes Of Health Olao

POSTED

about 13 hours ago

DEADLINE

Truck Crane Mechanical Repair and MaintenanceThis subcontract for the New Hampshire Department of Transportation involves providing comprehensive mechanical repair and corrective maintenance for truck cranes utilized by prime contractors on Bureau of Mechanical Services projects. The scope of work includes executing repairs identified during inspections, ensuring safety compliance, and performing factory-recommended services such as the installation of hydraulic filters. All services are to be conducted at the contractor's heavy equipment repair facility utilizing specialized hydraulic diagnostic tools to ensure the delivery of fully operational equipment. The solicitation for this project was posted on October 12, 2026, with a response deadline of October 23, 2026. Classified under NAICS code 811210, the contract focuses on specialized mechanical maintenance to support state infrastructure projects. Interested parties can find further details through the official New Hampshire procurement portal.

Department Of Transportation

POSTED

DEADLINE

ANSI/OSHA Truck Crane Inspection and CertificationThis subcontract for the New Hampshire Department of Transportation involves providing annual safety inspections and certifications for truck cranes used by prime contractors on Bureau of Mechanical Services projects. The scope of work includes conducting annual ANSI/OSHA and manufacturer-recommended inspections, performing static load tests, and handling the greasing and lubrication of fittings. Additionally, the contractor is responsible for providing detailed repair estimates and delivering all necessary safety certificates and inspection reports. To ensure compliance, all personnel must be OSHA and ANSI qualified, adhering strictly to OSHA 1926.550, ANSI/ASME B30.5, and ASME B30.10 standards. The opportunity is categorized under NAICS code 811210, with a response deadline set for October 23, 2026.

Department Of Transportation

POSTED

DEADLINE

Electrical Equipment Acceptance Testing & Special InspectionsThis subcontract for Electrical Equipment Acceptance Testing and Special Inspections involves providing technical acceptance testing and IBC special inspections for prime contractors working on Tarrant Regional Water District industrial electrical equipment. The scope of work includes testing medium voltage cables, transformers, switchgear, VFDs, and MCCs, as well as performing settings coordination. The selected provider is responsible for delivering certified acceptance testing reports and IBC inspection certificates. To qualify for this engagement, personnel must hold NETA certification and IBC Special Inspector certification. The opportunity is categorized under NAICS code 811210 and is associated with Infrastructure Engineering in Texas. Interested parties must submit their responses by the deadline of November 19, 2026.

Infrastructure Engineering

POSTED

DEADLINE

in about 1 month

J059--FY27 SERVICE - Motorola LMR Service and Maintenance (Base plus 4) Canandaigua VA Medical Center, Canandaigua, NY

Solicitation # 36C24226Q0812

Solicitation 36C24226Q0812 was issued by the Department of Veterans Affairs Network Contracting Office 2 for a firm-fixed-price contract to provide service and maintenance for the Motorola Land Mobile Radio (LMR) communications infrastructure at the Canandaigua VA Medical Center in New York. The scope of work includes corrective and preventative maintenance, technical support, hardware repair, software updates, and the operation of a service desk to support the facility's Police, Fire, and Engineering Departments. The contract structure consists of a base year plus four option years, with a set-aside for Service-Disabled Veteran-Owned Small Businesses (SDVOSB). The procurement process included several amendments, including a change in the billing cycle from yearly to quarterly and an extension of the response deadline to October 15, 2026. Evaluation factors for award included a capabilities statement, a management plan, a Motorola Authorized Federal Reseller Partner Letter of Authorization, and past performance references, with price evaluated for fairness and reasonableness over the total five-year period. However, a special notice dated October 12, 2026, officially canceled the solicitation, noting that the government may resolicit the requirement at a future date.

242-NETWORK Contract Office 02 (36C242)

POSTED

DEADLINE

Digital Asset Operations & MaintenanceThe Digital Asset Operations and Maintenance subcontract involves providing preventative and corrective maintenance for digital infrastructure projects within the City of Carson. The scope of work includes routine cleaning, hardware troubleshooting, LED module replacement, software patching, and continuous 24/7 system monitoring to ensure guaranteed uptime and adherence to established service level agreements. Managed through the Purchasing Department of the City of Carson in California, this opportunity falls under NAICS code 811210. Interested parties must submit their responses by November 19, 2026, at 5:00 PM. The selected contractor will be responsible for delivering detailed maintenance logs as part of their operational requirements.

Purchasing Department of City of Carson

POSTED

DEADLINE

in about 1 month

Linear Accelerator Service/Maintenance - Term Contract

Solicitation # RFQ-0000002924

Solicitation RFQ-0000002924 is a term contract issued by the Board of Supervisors of Louisiana State University and Agricultural and Mechanical College for the annual service and maintenance of a Varian Trilogy linear accelerator (serial number 294101) located at the LSU Veterinary Teaching Hospital. The scope of work covers the linear accelerator along with OBI, Portal Vision, MLC, and 4DTreat systems. Required deliverables include three annual onsite performance maintenance inspections, one annual extended performance maintenance inspection to ensure 100 percent functionality, and the provision of all necessary parts. Onsite support is required Monday through Friday from 7:30 am to 5:00 pm, with emergency response times mandated within six hours of a request. Bids must be submitted electronically to lsubids@lsu.edu by October 27, 2026, at 11:00 am. Pricing must be quoted on a net basis, F.O.B. LSU Destination, and all provided products must be new and of the manufacturer's current model. Award evaluation is based on price, technical suitability, and compliance with specifications. Successful vendors must be registered in the University's Workday system, provide a W-9 or W-8 form, and adhere to university insurance requirements, naming the Board of Supervisors as an additional insured. The contract is governed by the laws of the State of Louisiana and the University Procurement Code, with payment terms set at 30 days following the receipt of a proper invoice and acceptance of services.

LSU - Baton Rouge

POSTED

DEADLINE

LIPTM00415, RCIPT, FY25024-09, NECC PRP/FSR SPPT, NICHE SACThis new IDIQ contract, managed by NIWC Atlantic under the Naval Information Warfare Systems, seeks to provide technical support services for the Navy Expeditionary Combat Command. The primary objective is to deliver specialized support for fielded tactical radio systems, specifically focusing on NECC PRP/FSR support within the NICHE SAC framework. The performance of these services is designated for Norfolk, and the requirement is categorized under NAICS code 811210. Martha Leya serves as the primary point of contact for this forecast, which is intended to ensure the operational readiness and technical maintenance of critical communication systems.

POSTED

DEADLINE

More opportunities from National Aeronautics And Space Administration → NASA Shared Services Center

Same awarding agency

GibbsCAM Essentials Training Instructor

Professional and Management Development Training

POSTED

about 13 hours ago

DEADLINE

GibbsCAM GO Software Subscription Provider

Software Publishers

POSTED

about 13 hours ago

DEADLINE

Ion Gun and Controller SupplyThis subcontract through the NASA Shared Services Center involves the manufacture and supply of a specialized ion gun and a matching controller for prime contractors working on vacuum chamber projects. The ion gun is designed to produce beams ranging from 30 V to 20 KV, while the accompanying controller allows for the variation of beam flux. The scope of work includes ensuring that the equipment is physically compatible for mounting onto existing vacuum chambers and performing comprehensive factory quality testing. The final delivery consists of one ion gun and one controller, categorized under NAICS code 334511.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 13 hours ago

DEADLINE

Thermo-Calc Technical Support and License Administration

Other Computer Related Services

POSTED

about 13 hours ago

DEADLINE

Thermo-Calc and TC-Python License Maintenance

Software Publishers

POSTED

about 13 hours ago

DEADLINE

NASA HEC Environment Optimization SupportThe NASA HEC Environment Optimization Support subcontract involves providing specialized high-performance computing optimization and porting services for prime contractors working on NASA Goddard Space Flight Center projects. The primary objective is to optimize the IDEA framework and various physics models for use on Aitken and Pleiades compute nodes. This technical work requires expertise in MPI, OpenMP, Fortran, Python, and C++ to manage computational resources for high-resolution thermospheric simulations within Linux-based HPC clusters. Managed by the NASA Shared Services Center under NAICS code 541511, the contract requires the delivery of optimized codebases and detailed compute-efficiency reports. The opportunity was posted on October 13, 2026, with a response deadline of October 16, 2026.

Custom Computer Programming Services

POSTED

about 13 hours ago

DEADLINE

Data Assimilation and OSSE Framework DevelopmentThis subcontract, titled Data Assimilation and OSSE Framework Development, involves the creation of synthetic observation and error frameworks for prime contractors supporting NASA Goddard Space Flight Center projects. The scope of work focuses on utilizing the IDEA framework to construct synthetic observations for GDC Trailblazer, MoSAIC, and DAPHNE mission parameters, specifically to estimate geomagnetic indices and solar irradiance. The primary deliverables for this effort include synthetic observation datasets and error covariance matrices. The project is managed through the NASA Shared Services Center under NAICS code 541715. Due to the technical nature of the requirements, the position necessitates an advanced degree in Atmospheric Science or Computational Physics. The opportunity was posted on October 13, 2026, with a response deadline of October 16, 2026.

Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

about 13 hours ago

DEADLINE

Physics-Based Thermospheric Modeling SupportThis subcontract, titled Physics-Based Thermospheric Modeling Support, involves providing specialized scientific modeling and simulation of the Earth's thermosphere for prime contractors supporting NASA Goddard Space Flight Center projects. The scope of work focuses on executing simulations using TIE-GCM and WAM-IPE models to generate nature runs driven by storm-time forcing. These operations are carried out utilizing the IDEA framework and NASA High-End Computing architectures, specifically the Aitken and Pleiades systems. The primary deliverables for this engagement include validated simulation data, nature-run outputs, and detailed thermospheric specification analysis. Managed through the NASA Shared Services Center under NAICS code 541715, the contract ensures the delivery of critical physics-based data to support ongoing aerospace and atmospheric research initiatives.

Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

about 13 hours ago

DEADLINE

Supply of Hexagon HP-L-10.10 Laser Scanner Hardware

Analytical Laboratory Instrument Manufacturing

POSTED

about 13 hours ago

DEADLINE

USC Operational and Logistical Support for SeaPRISM & SMARTs

Solicitation # 80NSSC26943585Q

The NASA Shared Services Center is seeking operational and logistical support for SeaPRISM and SMARTs sensors located at the Eureka platform, with performance based at the NASA Goddard Space Flight Center. The scope of work involves managing and operating the AERONET-OC site, specifically utilizing Cimel sun photometers to capture hyperspectral spectral direct sun, moon, and sky measurements. The vendor is responsible for delivering raw data to AERONET in near-real time, providing monthly data to the PACE validation team, and coordinating maintenance for the collocated SMART-s instrument. Key technical requirements include adhering to AERONET data quality assurance policies, performing sun photometer calibrations every 12 to 18 months, and calibrating the spectrometer and sensor head every 6 months. This procurement is being conducted under NAICS code 611310 for non-commercial items or services using FAR Part 13 procedures. NASA intends to award a sole source contract to the University of Southern California under the authority of FAR 12.102(a), as they have been determined to be the sole provider capable of meeting these requirements. The anticipated period of performance is 24 months from the date of award. While the government is currently requesting capability statements from interested organizations to determine if the procurement should be competed, quotes will not be evaluated at this stage.

Colleges, Universities, and Professional Schools

POSTED

about 13 hours ago

DEADLINE

in about 19 hours

Thermospheric Observing System Simulation Experiments (OSSEs) for Future NASA/Heliophysics Missions

Solicitation # 80NSSC27943636Q

The NASA Shared Services Center is seeking to award a sole source contract to Leocast Space LLC for Thermospheric Observing System Simulation Experiments (OSSEs) to support future NASA Heliophysics missions. This procurement, categorized under NAICS 541715, follows FAR Part 12 procedures for commercial items and services. The effort will be procured by the NASA Shared Services Center with performance located at the NASA Goddard Space Flight Center. The period of performance is scheduled from August 1, 2026, through September 30, 2027. The technical scope involves conducting targeted OSSEs to quantify how measurement capabilities from the GDC Trailblazer and DAPHNE missions improve thermospheric specification and short-term prediction. Utilizing the Iterative Driver Estimation and Assimilation (IDEA) framework and physics-based models such as TIE-GCM and WAM-IPE, the contractor will perform controlled assimilation experiments. These experiments will analyze in situ GDC Trailblazer/MoSAIC observations, remotely sensed DAPHNE observations, and GNSS-derived orbit-effective mass densities. Interested organizations were requested to submit capability statements by October 16, 2026, for the purpose of determining whether to proceed with a competitive procurement.

Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

about 13 hours ago

DEADLINE

GibbsCAM GO Software Subscriptions

Solicitation # 80NSSC27945012Q

The NASA Shared Services Center is seeking to acquire GibbsCAM GO software subscriptions and related services to support an increased workload at the Stennis Space Center machine shop. The procurement, identified by solicitation number 80NSSC27945012Q and NAICS code 541519, is intended to be a sole source contract awarded to Texas Offline Inc under the authority of FAR 12.102(a), as they have been determined to be the sole provider of these subscriptions. The scope of work includes the delivery of two GibbsCAM GO Pro Milling - SMP licenses, two GibbsCAM GO Turning / Combo - SMP licenses, and two seats for a two-week, instructor-led Live Online Classroom Training course on GibbsCAM Essentials. Performance will take place at the Stennis Space Center in Mississippi, with a required period of performance of 30 days after receipt of order. The training component requires specific hardware and software configurations, including Windows 11, a high-performance Intel or AMD processor, and an Nvidia video card. The contract also outlines a Support and Maintenance Plan escrow process for license reactivation and reinstatement costs. Interested organizations were invited to submit capability statements by October 16, 2026, for the purpose of determining whether the procurement should be conducted on a competitive basis.

Other Computer Related Services

POSTED

about 13 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS