Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Authorized John Deere Tractor Repair

Active

Federal

Response Deadline10/28/2026, 09:30:00 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract opportunity, titled Authorized John Deere Tractor Repair, is issued by the Department of Defense through W07V Endist Vicksburg for performance in Vicksburg, Mississippi. The selected contractor will provide mechanical and structural repairs for prime contractors on John Deere tractor projects, specifically focusing on troubleshooting, removing damaged components, and installing new OEM back glass using specialized diagnostic and installation equipment. To be eligible, contractors must be an authorized repair center or provide documentation of specific training in John Deere equipment to ensure the delivery of fully repaired and functional tractors. Interested parties must respond by October 28, 2026, at 9:30 AM. The project falls under NAICS code 811310.

General Info

Authorized John Deere tractor repairs in Vicksburg, Mississippi, due by October 28, 2026.

Agency

Department Of Defense → W07V Endist Vicksburg

NAICS

811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

Place of Performance

Vicksburg, MS, 39180, USA

Set-Aside

NONE

Documents

This scope was carved out of W912EE26S0003.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Notice of Intent to Sole Source to Goldman Equipment Company (CAGE: 3NHT5) for John Deere 7210 Transmission Rebuild

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 22

subcontract

Response DeadlineOct 28

Submission deadline

Response Deadline

10/28/2026, 09:30:00 AM UTCin 6 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → W07V Endist Vicksburg

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → W07V Endist Vicksburg

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs mechanical and structural repairs for prime contractors on John Deere tractor projects. Troubleshoots, removes damaged components, and installs new OEM back glass using specialized glass installation tools and diagnostic equipment. Requires status as an authorized repair center or documented training in John Deere equipment. Delivers a fully repaired and functional tractor.

Similar Contracts

Same NAICS industry code

Kubota M8200 Clutch Replacement

Solicitation # kubota-m8200-clutch-replacement

Management & Training Corporation is soliciting lump sum bids for the comprehensive clutch replacement of a Kubota M8200 tractor at the Earle C. Clements Job Corps Center in Morganfield, Kentucky. The scope of work requires the contractor to provide all labor, transportation, materials, tools, and equipment to disassemble the tractor, inspect components, and replace the clutch friction discs, plates, bearings, oil seals, O-rings, and the clutch release spring. Additional requirements include resurfacing the flywheel, replacing necessary hydraulic pipes and flanges, changing the oil filter, and verifying the proper operation of the PTO clutch assembly in accordance with manufacturer specifications and industry practices. This solicitation is set aside for small businesses, including VOSB, SDVOSB, WOSB, and HUBZone certified entities. Interested offerors must submit a bid sheet, a completed supplier packet including IRS Form W-9 and self-certification, and proof of insurance by 3:00 PM CST on November 3, 2026. Award will be based on best value. The contract mandates compliance with various Federal Acquisition Regulations, including Buy American and Combating Trafficking in Persons, and adheres to Service Contract Act wage determinations for Kentucky. Contractors must also maintain strict information security safeguards and provide a Unique Entity Identification number via sam.gov.

Earle C. Clements Job Corps Center

POSTED

DEADLINE

Bus Fire Suppression System Maintenance

Solicitation # WMATA-0000010906

The Washington Metropolitan Area Transit Authority is seeking proposals for the maintenance of bus fire suppression systems under solicitation number WMATA-0000010906. This project falls under NAICS code 811310 and is managed through the agency's Virginia operations. Interested parties must submit their responses by the deadline of November 4, 2026. Detailed information and bidding processes are available through the official WMATA supplier portal.

Washington Metropolitan Area Transit Authority

POSTED

DEADLINE

Diesel Engine Teardown and Repair ServicesThis subcontract involves providing specialized teardown, evaluation, and repair services for diesel engine NIIN 016779537 in support of US Navy NAVSUP projects. The scope of work includes disassembling engines to identify wear, performing necessary mechanical repairs or modifications, and ensuring all units are packaged according to MIL-STD-2073. The final deliverable is a fully repaired and certified diesel engine. To execute this contract, the provider must utilize precision engine machining tools and adhere strictly to NAVSUP 1397-1 labeling standards. Additionally, the contractor is required to provide CMMC UIDs via SPRS. This opportunity is managed under NAICS code 811310 for the Department of Defense, specifically the Navsup Weapon Systems Support Mech.

Navsup Weapon Systems Support Mech

POSTED

about 4 hours ago

DEADLINE

Oxygen/Nitrogen Cleaning ServicesThis subcontract, managed by the Department of Defense through SPRMM1 DLA Mechanicsburg, involves providing specialized cleaning services for solenoid valves used in DLA supply contracts. The primary objective is to ensure that components are completely free of contaminants for safe operation in oxygen or nitrogen environments. All work must be executed strictly according to MIL-STD-1330 standards using controlled environments and specialized cleaning solvents. The service provider is required to hold a MIL-STD-1330 certification to guarantee that all delivered valves are certified and ready for immediate installation. This opportunity falls under NAICS code 811310 and is intended for prime contractors delivering critical components to the agency.

SPRMM1 DLA Mechanicsburg

POSTED

about 4 hours ago

DEADLINE

in about 4 hours

Rotary Pump Repair and Overhaul ServicesThis subcontract involves the full mechanical repair and overhaul of a Rotary Pump, NIIN 016242542, for prime contractors supporting Navsup Weapon Systems Support Mech projects under the Department of Defense. The scope of work includes the disassembly, inspection, and repair of the pump in accordance with contractor standard practices, technical manuals, and TDP Version No. O02. To ensure quality and compliance, the contractor must perform testing based on manufacturer specifications and mark all items according to MIL-STD-130, REV N. The project requires the delivery of one fully repaired and tested rotary pump. Prospective bidders must hold CMMC certification to be eligible for the award. This opportunity falls under NAICS code 811310, with a response deadline set for November 2, 2026.

Navsup Weapon Systems Support Mech

POSTED

about 4 hours ago

DEADLINE

CRAC Maintenance Service

Solicitation # W50S8R27Q0001

Solicitation W50S8R27Q0001 is a 100% small business set-aside request for quotation for a firm-fixed price contract to provide Computer Room Air Conditioning (CRAC) preventative maintenance and 24/7 emergency repair services. The work will be performed at B409, located at 1947 Harrington Memorial Road, Mansfield, Ohio. The contract consists of a one-year base period from November 15, 2026, to November 14, 2027, with four additional one-year option periods, for a total potential duration of five years. The scope includes all personnel, equipment, and materials necessary to maintain precise temperature and humidity levels in data centers, with a strict requirement for emergency on-site arrival within four hours of notification. Award will be based on the most advantageous offer considering price, technical capability, and past performance. Technical evaluations focus on technician qualifications, requiring EPA Section 608 Universal Certification and a minimum of two years of experience in mission-critical facilities, as well as a detailed technical approach narrative. Offerors must submit their quotes in three volumes covering technical factors, past performance, and price by October 26, 2026. The contractor is required to maintain a Quality Control Plan and adhere to OEM, ASHRAE, and EPA standards, while utilizing the Wide Area WorkFlow system for invoicing.

W7NU Uspfo Activity Ohang 179

POSTED

about 4 hours ago

DEADLINE

Notice of Intent to Sole Source to Goldman Equipment Company (CAGE: 3NHT5) for John Deere 7210 Transmission Rebuild

Solicitation # W912EE26S0003

The Department of Defense, through the W07V Endist Vicksburg office, has issued a notice of intent to sole source a firm-fixed price contract for the repair of a John Deere 7210 tractor, serial number 1RW7210RCEC081318. The scope of work requires the contractor to provide all labor, materials, and equipment to remove, rebuild, and reinstall the transmission and replace the back glass to return the equipment to its original operating condition. All service work must be performed at the contractor's facility, while the U.S. Army Corps of Engineers remains responsible for the delivery and pickup of the equipment. Goldman Equipment Company, a small business under NAICS code 811310, has been identified as the intended sole source based on the requirement for genuine OEM parts and the necessity of an authorized repair center capable of performing the required troubleshooting and repairs. This procurement is conducted under the authority of 41 U.S.C. 1901 and RFO 12.102(a). Interested parties may submit capability statements to the primary contact by 4:30 PM CDT on October 28, 2026. The selected contractor must provide evidence of training and experience along with a detailed technical description of the work to be executed prior to the final award.

W07V Endist Vicksburg

POSTED

about 4 hours ago

DEADLINE

Industrial Control Systems (PLC) SupportThis subcontract for Industrial Control Systems (PLC) Support involves providing diagnosis, corrective repair, and preventive maintenance for programmable logic controllers at Massachusetts DOC facility projects in Milford. The scope of work specifically focuses on maintaining GE and Emerson PLCs and PLC operator workstations used for door-control interfaces. The selected contractor is responsible for performing quarterly scheduled maintenance and functional checks, with a requirement to deliver detailed functional check reports and corrective repair documentation. Due to the nature of the work environment, all personnel must obtain full DOC security clearance. The opportunity was posted on October 22, 2026, with a response deadline of January 8, 2027. This project falls under NAICS code 811310 and is managed through the DOC Fiscal Services agency.

DOCCF - DOC Fiscal Services

POSTED

about 11 hours ago

DEADLINE

Material Handling Equipment Inpection, Parts & Repair Services

Solicitation # N1510

Arlington County Government is soliciting a Contract Purchase Agreement for annual inspection, parts, and repair services for material handling equipment (MHE) located in Virginia. The scope of work encompasses routine maintenance, load tests, and MAINMAN assessments for various assets, including manual chain hoists, single girder electric overhead traveling cranes, and pillar jib cranes with electric wire rope hoists. The contractor is responsible for providing all necessary supervision, labor, materials, tools, and equipment, with bid evaluations based on an estimated 96 hours of certified technician labor per year. Additionally, the requirements include the provision of a 30 ft telescopic boom lift and a 5,000 lb warehouse forklift for 12 days per year each. The solicitation, numbered N1510, was posted on October 15, 2026, with a response deadline of November 4, 2026. Award selection is based strictly on price, and all goods are purchased F.O.B. destination in Arlington County. Payment terms are set at Net 45 in USD. Interested suppliers must submit a bid form and the specified pricing sheet, as the amounts listed on Attachment A will govern the final evaluation. Point of contact for this procurement is Buyer Lucas Alexander.

Arlington County Government

POSTED

about 12 hours ago

DEADLINE

Hydrostatic Testing and Certification of MSA SCBA TanksThis subcontract involves the hydrostatic pressure testing and certification of 200 MSA SCBA tanks for prime contractors working on County of Hawaii Fire Department projects. The selected provider must perform all testing in strict accordance with NFPA 1852 and 1850, U.S. DOT regulations, CGA Standards C-1, C-5, C-6, and C-8, as well as MSA G1 manufacturer specifications. The final deliverables include the return of all tanks fully tested, certified, and tagged. To qualify, the contractor must hold valid DOT and CGA certifications and utilize hydrostatic test pumps and calibration equipment that meet all applicable DOT and CGA standards. This opportunity falls under NAICS code 811310 and is associated with the Hawaii Fire Department.

Hawaii Fire Department

POSTED

about 14 hours ago

DEADLINE

Crane and Hoist Inspection and Repair TechnicianThis subcontract opportunity with the Gwinnett County Government involves providing specialized technician services for the inspection and repair of cranes and hoists at Department of Water Resources facility projects. The selected contractor will be responsible for performing preventive maintenance and conducting annual and periodic inspections for 121 units. To ensure continuous OSHA compliance, the scope of work includes executing both scheduled and emergency repairs. Qualified service representatives must possess extensive knowledge of OSHA crane safety standards to deliver fully operational equipment and detailed inspection reports. Interested parties must submit their responses by November 18, 2026, under NAICS code 811310.

Gwinnett County Government

POSTED

about 21 hours ago

DEADLINE

BL001-27 Inspection, Maintenance, and Repair of Hoists and Cranes on an Annual Contract

Solicitation # BL001-27

Solicitation BL001-27 is an annual contract issued by the Gwinnett County Board of Commissioners for the inspection, maintenance, and repair of approximately 121 hoists and cranes for the Department of Water Resources. The scope of work includes performing annual minor and major preventive maintenance, emergency repairs, and OSHA-required load testing at various county facilities, including wastewater pump stations. The contract begins upon notification of award and includes four optional one-year renewal periods. Award will be granted to the lowest responsive and responsible vendor or the highest scoring firm, with considerations for the quality of articles, conformity to specifications, and the vendor's ability to perform. The service provider must employ certified mechanics with documented experience in specific brands such as Acco, Wright, and Yale, and must ensure all capacity and safety labeling is accurate. Key financial terms include a cap on markups for repair or replacement parts at 10 percent and a requirement for the provider to submit supplier invoices to verify costs. The contract requires strict adherence to OSHA standards and Georgia state laws, including O.C.G.A. § 13-10-91. Necessary bonding includes a 5 percent bid bond and 100 percent performance and payment bonds. The county maintains the right to terminate the agreement for cause with 10 days' notice or for convenience with 30 days' notice.

Gwinnett County Government

POSTED

about 21 hours ago

DEADLINE

More opportunities from Department Of Defense → W07V Endist Vicksburg

Same awarding agency

Genuine John Deere OEM Parts SupplyThis subcontract opportunity, managed by the Department of Defense through W07V Endist Vicksburg, requires the procurement of genuine Original Equipment Manufacturer parts for John Deere tractor repair projects. The selected provider is responsible for sourcing, verifying, and delivering authentic replacement back glass and hardware directly to the repair facility in Vicksburg, Mississippi. To ensure compliance with genuine OEM requirements, the contractor must be an authorized John Deere parts distributor. The solicitation was posted on October 22, 2026, with a response deadline of October 28, 2026, at 9:30 AM. This requirement falls under NAICS code 423810 and is specifically designed to support prime contractors in maintaining equipment standards through the use of verified manufacturer components.

Construction and Mining (except Oil Well) Machinery and Equipment Merchant Wholesalers

POSTED

about 4 hours ago

DEADLINE

Industrial Electrical Systems InstallationThis subcontract for Industrial Electrical Systems Installation involves providing electrical power and lighting services for prime contractors on USACE Vicksburg District projects located in Hernando. The scope of work includes the installation of 200 amp enclosed circuit breakers, main breaker panels, pump control panels with motor starters, and well disconnects. Additionally, the contractor is responsible for installing LED strip lights, photocell outside lighting, 120V GFCI outlets, and 3-phase circuits for air compressors in accordance with 2020 NEC standards to deliver a fully energized system. Managed by the Department of Defense under the W07V Endist Vicksburg agency, this opportunity is designated as a total Small Business Set Aside under NAICS code 238210. The solicitation was posted on October 21, 2026, with a response deadline of November 4, 2026.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

Industrial Tank Coating (Sandblasting & Painting)This subcontract opportunity involves providing specialized surface preparation and high-performance coating services for a tank located in Hernando, Mississippi, supporting prime contractors on USACE Vicksburg District projects. The scope of work requires the sandblasting of both the interior and exterior of the tank, followed by the precise application of a multi-layer coating system. This system includes Tnemec-Zinc, Tnemec series 21, L140 epoxy, and 1094 urethane, all applied according to manufacturer specifications to achieve required thickness levels. Managed by the Department of Defense under the W07V Endist Vicksburg agency, this project is designated as a total Small Business Set Aside under NAICS code 238320. Interested parties must submit their responses by November 4, 2026. The final deliverable is a fully sandblasted and painted tank that meets all specified technical and thickness standards.

Painting and Wall Covering Contractors

POSTED

DEADLINE

Industrial Plumbing & Equipment InstallationThis subcontract opportunity, titled Industrial Plumbing and Equipment Installation, involves the installation of specialized water system plumbing and mechanical equipment for prime contractors supporting USACE Vicksburg District projects in Hernando. The scope of work requires the installation of specific components, including AWWA C-509 valves, flange fittings, Watts pressure reducers, flange master meters, and Stenner chemical pumps, as well as a 3-phase air compressor and its associated fittings to deliver a fully operational system. Managed by the Department of Defense under the W07V Endist Vicksburg agency, this project is designated as a total Small Business Set Aside under NAICS code 238220. The solicitation was posted on October 21, 2026, with a response deadline set for November 4, 2026.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

Water Well Decommissioning ServicesThis subcontract opportunity for Water Well Decommissioning Services supports prime contractors on USACE Vicksburg District projects. The selected provider will be responsible for developing a detailed decommissioning plan and executing the abandonment of existing water wells in strict accordance with all applicable state and local water regulatory codes. Final deliverables include the successfully decommissioned well and all required approved regulatory documentation. The project is located in Hernando, Mississippi, and is designated as a total Small Business Set Aside under NAICS code 238910. Managed by the Department of Defense through the W07V Endist Vicksburg agency, the solicitation was posted on October 21, 2026, with a response deadline of November 4, 2026.

Site Preparation Contractors

POSTED

DEADLINE

Pre-engineered Metal Building Supply & InstallationThis subcontract opportunity is for the supply and installation of a pre-engineered metal building to support prime contractors on USACE Vicksburg District projects located in Hernando, Mississippi. The scope of work involves the delivery and erection of a 30 by 50 foot Red Iron open span building featuring 12 foot eaves and 26-gauge roof and wall panels. The completed structure must include one roll-up door, one 3 by 7 foot walk-through door, insulation, and gutters. The contractor is responsible for providing PE-stamped engineer drawings and anchor bolt plans to ensure structural compliance. This project is designated as a total Small Business Set Aside under NAICS code 238120. Responses are due by November 4, 2026, for the Department of Defense agency W07V Endist Vicksburg.

Structural Steel and Precast Concrete Contractors

POSTED

DEADLINE

Arkabutla Lake Water Plant Rehab and Pre-fabricated Metal Building Installation

Solicitation # W912EE27QA002

Solicitation W912EE27QA002 is a request for a firm-fixed price contract for the Arkabutla Lake Water Plant rehabilitation and the installation of a pre-fabricated metal building in Hernando, Mississippi. This procurement is a 100% small business set-aside under NAICS code 332311. The project requires a turn-key solution to abandon an old well and install a 30 by 50 foot pre-fabricated metal Red Iron open span building with specific eaves, gauge, and door requirements. The scope of work also includes installing new plumbing and equipment meeting AWWA C-509 specifications, performing specialized sand blasting and painting of the tank using Tnemec and epoxy coatings, and installing new electrical systems compliant with 2020 NEC requirements. The contractor is responsible for providing all supervision, labor, and equipment, with a total performance period of 120 calendar days from the date of award. Award will be granted to the lowest priced quote that is determined successful based on technical capability, including the decommissioning plan for the well and the methodology for building installation. All deliverables must be marked according to DoD item unique identification standards and MIL-STD-130. Payment will be processed electronically through the Wide Area WorkFlow system. Offerors must maintain current registration in the System for Award Management and provide CMMC unique identifiers if processing federal contract information.

Prefabricated Metal Building and Component Manufacturing

POSTED

DEADLINE

Operation and Maintenance of Arkansas Lakes Project

Solicitation # W912EE26RA015

The U.S. Army Corps of Engineers Vicksburg District is soliciting proposals for a 100% total small business set-aside Indefinite Delivery Indefinite Quantity (IDIQ) contract under NAICS 561210 for the operation and maintenance of the Arkansas Lakes Flood Control Projects at Lake Ouachita, Lake Greeson, and DeGray Lake. The scope of work encompasses a broad range of facilities support services, including janitorial and custodial work, mowing and landscaping, dumpster and waste disposal, heavy equipment repair, carpentry, masonry, and emergency storm debris removal. The contract is structured as a firm-fixed-price agreement with a base ordering period of one year, four one-year options, and an additional six-month extension to prevent gaps in service. The total ordering limitation is 9,000,000.00 dollars, with a minimum guarantee of 1,500.00 dollars. Award will be determined using a best-value tradeoff process, prioritizing technical approach, staffing, and management approach as the most important factor, followed by past performance, with price being the least significant. Proposals must be submitted in three separate volumes and adhere to strict formatting guidelines, including a 50-page limit for the technical volume. Key requirements include the designation of a Project Superintendent as key personnel, compliance with the EM 385-1-1 safety manual, and adherence to Service Contract Act wage determinations. Following the most recent amendment, the solicitation closing date has been extended to October 30, 2026.

Facilities Support Services

POSTED

DEADLINE

Utility/Culvert Installation ContractorThis subcontract opportunity is for a Utility/Culvert Installation Contractor to support prime contractors on USACE civil infrastructure projects managed by the Department of Defense, specifically the W07V Endist Vicksburg. The selected contractor will be responsible for the full installation process of culvert systems, including pipe trench excavation, the placement of pipes and connecting bands, and the subsequent backfilling and compaction of trenches. All work must be performed in accordance with Section 33 42 29.01 and AWS standards, utilizing specialized trenching, compaction, and pipe lifting equipment to deliver a fully installed and tested system. The project is classified under NAICS code 237110 and is designated as a Total Small Business Set Aside. Interested parties must submit their responses by October 30, 2026, following the posting date of October 19, 2026.

Water and Sewer Line and Related Structures Construction

POSTED

DEADLINE

Corrugated Metal Pipe (CMP) SupplierThis subcontract opportunity is for a Corrugated Metal Pipe supplier to provide materials and associated hardware for prime contractors working on USACE civil infrastructure projects under the Department of Defense, specifically for the W07V Endist Vicksburg. The scope of work includes the delivery of various gages and lengths of corrugated metal pipe, including pipes 30 inches or smaller, pipe ends, lifting lugs, connecting bands, and tank rods in accordance with Section 33 42 29.01. The supplier is also responsible for providing necessary product data submittals and certificates. This is a total Small Business Set Aside under NAICS code 331210. The solicitation was posted on October 19, 2026, with a response deadline of October 30, 2026. The selected contractor will be responsible for the full delivery of all specified CMP and hardware directly to the project site.

Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

DEADLINE

Landscaping and Levee Surfacing ContractorThis subcontract opportunity is for a Landscaping and Levee Surfacing Contractor to support prime contractors on USACE civil infrastructure projects managed by the Department of Defense, specifically the W07V Endist Vicksburg. The scope of work involves executing levee surfacing and the maintenance or establishment of new turf using specialized hydroseeders and surfacing machinery. All operations must strictly adhere to USDA Quarantined Considerations to ensure the delivery of stabilized surfaces and healthy vegetation. The project is designated as a Total Small Business Set Aside under NAICS code 561730. Interested parties must submit their responses by October 30, 2026, following the posting date of October 19, 2026.

Landscaping Services

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS