Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Award Notice for Fabrication, Design and Manufacturing IDIQ (2 of 2)

Awarded

1333ND26DNB610022Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Department of Commerce NIST has issued an award notice for a Fabrication, Design and Manufacturing Indefinite Delivery Indefinite Quantity contract under solicitation number 1333ND26DNB610022. This specific award represents the second of two multiple award IDIQs and is designated as a total small business set-aside under NAICS code 541330. The contract is managed by the office located in Gaithersburg, Maryland, which also serves as the primary place of performance. Primary administrative contact for this award is Nina Lin, with Donald Collie serving as the secondary point of contact.

General Info

NIST small business IDIQ for fabrication, design, and manufacturing in Gaithersburg, Maryland.

Agency

Department Of Commerce Nist

Contract Value

$2,000

NAICS

541330 - Engineering Services

Place of Performance

Gaithersburg, MD, 20899, USA

Set-Aside

SBA

Awardee

PHOENIX ANALYSIS & DESIGN TECHNOLOGIES INC

Award Issued Date

09/23/2026, 12:00:00 AM UTC

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseAwarded

PostedSep 25

Award Notice

AwardedSep 23

Contract was awarded

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Commerce Nist

Contacts2 people available

OfficeGAITHERSBURG, MD, 20899, USA

Organization / AgencyDepartment Of Commerce Nist

Office AddressGAITHERSBURG, MD, 20899, USA

Contacts

Nina Lin

contact@example.gov

Donald Collie

contact@example.gov

Full Description

Show more

2 of 2 Multiple Award IDIQs.

Similar Contracts

Same NAICS industry code

Business Impact Analysis and Update Disaster Recovery Plan Services – Inland Empire Utilities Agency

Solicitation # business-impact-analysis-update-disaster-recovery-plan-services-inland-empire-utilities-agency

Aanko Technologies Inc. is soliciting certified Disadvantaged Business Enterprise and Small Business Enterprise sub-consultants and suppliers to provide specialized professional services for the Inland Empire Utilities Agency in San Bernardino and Riverside Counties, California. The scope of work focuses on emergency management, business continuity planning, technical writing, data collection, and the updating of IT and disaster recovery plans. Eligible firms should operate under NAICS codes related to administrative management, engineering services, computer systems design, or public relations and technical documentation. Interested parties must submit their responses by November 17, 2026. Primary inquiries regarding this solicitation should be directed to Liz Jordan-Wettstein.

Aanko Technologies Inc.

POSTED

about 3 hours ago

DEADLINE

Master Equipment Schedule (MES) and BIM CoordinatorThis subcontract for the Frimley Health NHS Foundation Trust seeks a Master Equipment Schedule (MES) and BIM Coordinator to manage technical data and spatial coordination of equipment for prime contractors. The successful provider will be responsible for developing Master Equipment Schedules, performing Room Data Sheet validation, and ensuring full BIM alignment for all equipment. Key duties include leading stakeholder requirements gathering with clinical and estates teams and utilizing Revit or similar BIM software to deliver validated layouts and documentation. The opportunity was posted on October 20, 2026, with a response deadline of November 16, 2026. Classified under NAICS code 541330, the contract focuses on the delivery of integrated BIM layouts and validated data sheets to support the trust's infrastructure projects.

Frimley Health NHS Foundation Trust

POSTED

about 18 hours ago

DEADLINE

ADA Accessibility ConsultantThe ADA Accessibility Consultant subcontract involves performing comprehensive accessibility audits and identifying renovation requirements for prime contractors working on projects for the Collier County Parks and Recreation Division in Florida. The selected consultant will conduct site visits to identify physical barriers and evaluate facility needs against ADA standards using specialized measurement tools and compliance checklists. The primary deliverable for this engagement is a detailed ADA accessibility study and renovation report. Qualified candidates should ideally hold a Registered Accessibility Specialist (RAS) or ADA Coordinator certification to ensure technical accuracy. This opportunity falls under NAICS code 541330 and was posted on October 20, 2026, with a response deadline of November 18, 2026.

Parks & Recreation

POSTED

about 18 hours ago

DEADLINE

Specialized Facility Planning (Marinas & Aquatics)This subcontract opportunity is for Specialized Facility Planning focusing on marinas and aquatics for the Collier County Parks and Recreation Division in Florida. The selected provider will offer technical recommendations and facility improvement plans for sports complexes, beach parks, aquatic centers, and marinas. All assessments and recommendations must adhere to established marine engineering standards and aquatic safety codes to ensure the quality and safety of the infrastructure. The project requires a high level of technical expertise, with a strong recommendation for a Professional Engineer specializing in Civil or Marine engineering. Interested parties must submit their responses by November 18, 2026. This engagement falls under NAICS code 541330 and is designed to support prime contractors in delivering comprehensive facility enhancements for the county.

Parks & Recreation

POSTED

about 18 hours ago

DEADLINE

Urban & Recreation Planning (Lead Consultant)This subcontract opportunity for Urban and Recreation Planning involves the strategic development of a comprehensive Parks and Recreation Master Plan for prime contractors working with the Collier County Parks and Recreation Division in Florida. The selected consultant will be responsible for creating implementation schedules, recommending facility improvements, evaluating budget capacity, and performing program life cycle analysis utilizing GIS mapping tools. The final deliverables for this engagement are the completed Master Plan and a detailed Implementation Schedule. To qualify for this role, the consulting team must include at least one staff member holding an American Institute of Certified Planners certification. The project falls under NAICS code 541330 and is associated with a response deadline of November 18, 2026.

Parks & Recreation

POSTED

about 18 hours ago

DEADLINE

Civil Engineering & Water System DesignThis subcontract for Civil Engineering and Water System Design involves providing professional engineering services for prime contractors on water system projects for the City of Mercer Island. The scope of work includes designing the layout for 5,000 linear feet of ductile iron water main replacement, as well as the replacement of PRV vaults and fire hydrants and water services. The selected contractor must resolve utility conflicts in accordance with City of Mercer Island Standard Details Water and is responsible for delivering technical specifications, cost estimates, and bid-ready plans. Qualified candidates must hold a valid Washington State Professional Engineer license. This opportunity is categorized under NAICS code 541330 and is managed by the Public Works agency. Interested parties must submit their responses by the deadline of November 4, 2026.

POSTED

about 18 hours ago

DEADLINE

2026 AC Water Main Replacement

Solicitation # 2026-RFQ-042

Solicitation 2026-RFQ-042 is a request for qualifications from the City of Mercer Island Public Works department for professional engineering services to design water system upgrades. The project focuses on replacing approximately 5,000 linear feet of aging asbestos cement water mains with ductile iron mains along SE 40th St and E Mercer Way. The scope is divided into two phases: Phase 1 involves water system and PRV vault replacement on SE 40th St from Greenbrier Ln to 97th Ave SE, and Phase 2 extends the replacement to 97th Ave SE and the 3700 and 3800 blocks of East Mercer Way. Additional components for replacement include fire hydrants and water services. The design must comply with the Reduction of Lead in Drinking Water Act and the City of Mercer Island Standard Details Water. The project follows a goal-based timeline with bid-ready plans for Phase 1 due by Q2 2027 and Phase 2 by Q3 2027, with overall construction completion targeted for Q2 2028. Qualified firms must be licensed in the State of Washington and submit a Statement of Qualifications limited to 12 pages, including a proposed timeline and three references from the last five years. Selection is at the sole discretion of the City, and the awarded firm will negotiate a scope and fee schedule using the City's standard professional services agreement. Administration is managed by the City Manager, with payments issued via City warrant within 45 days of receiving a proper monthly invoice.

POSTED

about 18 hours ago

DEADLINE

Intake Structure Inspection and ReportingThis subcontract for Intake Structure Inspection and Reporting involves performing technical inspections and condition assessments for prime contractors working on auxiliary lake intake projects for the City of Murfreesboro Water Resources department in Tennessee. The selected provider will be responsible for identifying major intake components and evaluating structural integrity through the use of high-resolution photography and, if necessary, underwater ROVs or divers. Qualified candidates must possess professional engineering licenses or certified inspector credentials to ensure technical accuracy. The final deliverable for this engagement is a comprehensive written report that includes color photography and a detailed assessment of all inspected components. Responses for this opportunity are due by November 13, 2026.

Water Resources

POSTED

about 18 hours ago

DEADLINE

Pure Water System Engineering and DesignThe Pure Water System Engineering and Design subcontract involves providing professional engineering design services for prime contractors working on facility projects at North Dakota State University. The selected provider will be responsible for analyzing feed-water demand and characteristics to develop essential technical documentation, including Process Flow Diagrams, Piping and Instrumentation Diagrams, and equipment layouts created via CAD software. Final deliverables for the project include technical submittals, shop drawings, and P&IDs. This opportunity is categorized under NAICS code 541330 and requires the performing party to hold a Professional Engineer license. Interested parties must submit their responses by the deadline of November 17, 2026.

POSTED

about 19 hours ago

DEADLINE

Water System Controls and BAS/BMS IntegrationThis subcontract for Water System Controls and BAS/BMS Integration supports prime contractors on facility projects at North Dakota State University. The scope of work involves the programming of system controls, installation of instrumentation, HMI configuration, and the establishment of communication protocols to ensure seamless BAS/BMS interface. To maintain system consistency, all provided PLC controllers and HMI panels must be fully compatible with the existing infrastructure at NDSU. The primary objective is the delivery of a fully programmed and integrated control system. Interested parties should note that the solicitation was posted on October 20, 2026, with a response deadline of November 17, 2026. The project falls under NAICS code 541330 and is managed through the state of North Dakota.

POSTED

about 19 hours ago

DEADLINE

Structural Engineering ConsultantThis subcontract opportunity is for a Structural Engineering Consultant to provide specialized technical services for Ohio Department of Rehabilitation and Corrections facility projects. The selected consultant will work with prime contractors to perform structural analysis of building facades and roof supports, which includes conducting structural load calculations and stability assessments to ensure the viability of new materials. The scope of work requires the delivery of detailed structural analysis reports and professional engineered drawings. This procurement is managed by the Ohio Facilities Construction Commission under NAICS code 541330, with a response deadline set for November 4, 2026.

Oh Facilities Construction Com

POSTED

about 19 hours ago

DEADLINE

Roofing Consultant / SpecialistThis subcontract opportunity is for a Roofing Consultant or Specialist to support prime contractors on projects for the Ohio Department of Rehabilitation and Corrections. The selected provider will be responsible for performing existing conditions assessments of selected roofs, which includes surveying roof degradation and evaluating the status of existing warranties. The primary deliverables for this engagement are comprehensive existing conditions assessment reports and the development of detailed technical specifications for new roofing systems. This project falls under NAICS code 541330 and is managed through the Ohio Facilities Construction Commission.

Oh Facilities Construction Com

POSTED

about 19 hours ago

DEADLINE

More opportunities from Department Of Commerce Nist

Same awarding agency

Building 215 Clean Room HEPA Filter Replacement

Solicitation # RFI-195000-26-00181

The National Institute of Standards and Technology is conducting market research through a Request for Information for the Building 215 Advanced Measurement Laboratory cleanroom repair and HEPA filter replacement project in Gaithersburg, Maryland. This initiative follows a previous solicitation that failed to produce an acceptable offer, prompting NIST to reassess its acquisition strategy and seek industry feedback on constructability, cost, and schedule feasibility. The project scope involves the modernization of an 1,800 square meter facility, including the replacement of approximately 1,200 HEPA filters, 70 VAV terminal units, and 54 airflow monitoring devices, as well as the installation of 32 exhaust air control valves and associated ductwork repairs, testing, and recertification. A critical component of the project is the proposed phasing plan, which aims to minimize research disruptions by utilizing 19 construction phases, including 18 critical cleanroom outage phases. Each critical outage is currently envisioned as a nine-day window starting Friday evening and requiring 24/7 operations to achieve ready-for-re-occupancy by the following Monday morning. NIST is specifically requesting rough-order-of-magnitude cost estimates and industry input on whether this aggressive outage schedule is realistic or if it creates prohibitive risks and costs. Responses, including company experience and recommendations for improving competition and project execution, are due by October 14, 2026.

Industrial Building Construction

POSTED

DEADLINE

Optional Leak Check System SupplyThis contract involves the supply of an optional high-sensitivity leak detection system designed to verify the hermetic seal integrity within a microfluidic TEM cell. The primary focus is to provide a reliable solution that ensures the cells remain sealed, which is crucial for maintaining the integrity and performance of these specialized devices. The contract is classified under NAICS code 334511, indicating its association with electromedical and electrotherapeutic apparatus manufacturing. The contract is a subcontract issued by the Department of Commerce's National Institute of Standards and Technology (NIST) and is to be performed in Gaithersburg, Maryland, with the ZIP code 20899. Although specific solicitation details and set-aside statuses are not provided, the project emphasizes precision and quality in leak detection technology to support advanced microfluidic applications. This system will likely enhance the reliability and accuracy of microfluidic experiments or operations conducted using the TEM cell.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

DEADLINE

Installation and Training ServicesThe contract involves the on-site installation of a Transmission Electron Microscope (TEM) holder at the National Institute of Standards and Technology (NIST) facility located in Gaithersburg. Along with the installation, the contractor is responsible for providing comprehensive operator training to ensure proper use and maintenance of the equipment. This subcontract, classified under NAICS code 541330, supports specialized professional services related to the setup and operational readiness of high-precision scientific instruments. Issued by the Department of Commerce, NIST, the contract ensures that the TEM holder is installed at the specified Gaithersburg location, with a focus on delivering both technical installation and in-depth training. This dual service approach is designed to enhance user proficiency and optimize the performance of the equipment, supporting NIST’s mission of advancing measurement science. The contract was posted in May 2026 and is accessible through the System for Award Management (SAM) platform.

Engineering Services

POSTED

DEADLINE

Real-Time Sample Correction Software DevelopmentThe contract involves the development and integration of specialized software designed to provide real-time correction for sample drift during Transmission Electron Microscopy (TEM) imaging, thereby ensuring imaging stability. This work is categorized under the NAICS code 541512, which relates to computer systems design services. The contract is a subcontract issued by the Department of Commerce, specifically through the National Institute of Standards and Technology (NIST). The project is set to be performed in Gaithersburg, with a focus on enhancing the precision and reliability of TEM imaging by addressing sample drift issues in real time. While specific financial or timeline details are not provided, the contract aims to support advanced scientific research through improved imaging software, reflecting the Department of Commerce's commitment to technological innovation in measurement and standards.

Computer Systems Design Services

POSTED

DEADLINE

Integrated Fluid Delivery System SupplyThis contract entails the supply of an integrated fluid delivery system designed for precise fluid management during transmission electron microscopy (TEM) experiments. The system enables in-situ solution exchange and degassing, which are critical for maintaining experimental accuracy and fluid integrity under the microscope. The contract is classified under the NAICS code 333992, indicating its focus on fluid power valve and hose fitting manufacturing, emphasizing the technical specificity required. The subcontract is issued by the Department of Commerce's National Institute of Standards and Technology (NIST) and calls for performance in Gaithersburg, Maryland, ZIP code 20899. Specific details such as the solicitation number or set-aside type were not indicated. This procurement reflects the agency’s commitment to advancing experimental capabilities in scientific research by integrating sophisticated fluid handling systems directly into microscopy workflows.

Welding and Soldering Equipment Manufacturing

POSTED

DEADLINE

Electrochemical Liquid TEM Holder SupplyThe contract entails the supply of a specialized electrochemical liquid transmission electron microscopy (TEM) holder designed to facilitate operando imaging of material dynamics. This advanced TEM holder incorporates integrated heating and cooling functionalities, enabling precise temperature control during imaging processes. The equipment is intended to support detailed analysis of material behaviors under electrochemical conditions in real time. Issued by the Department of Commerce’s National Institute of Standards and Technology (NIST), the subcontract falls under the NAICS code 334516, which pertains to analytical laboratory instrument manufacturing. The performance location is specified as Gaithersburg, with a ZIP code of 20899. The contract was posted on May 20, 2026, and although some logistical details such as solicitation number and point of contact are not provided, the primary goal is the procurement of this customized TEM holder to enhance research capabilities in material science.

Analytical Laboratory Instrument Manufacturing

POSTED

DEADLINE

Precision Handling and Packaging of Micro SpecimensThis contract involves the development of specialized protocols for the safe handling, storage, and shipping of fragile micro specimens. The work focuses on creating custom fixtures designed to securely hold these delicate items, alongside implementing environmental protection measures to ensure their integrity during transportation and storage. The objective is to mitigate risks associated with damage caused by improper handling or adverse conditions. The contract is a subcontract issued by the Department of Commerce's National Institute of Standards and Technology (NIST), with the place of performance located in Gaithersburg. It falls under the NAICS code 488490, which pertains to specialized freight trucking services. The project was posted on May 6, 2026, and aims to enhance precision in the packaging and transportation of micro-scale specimens, ensuring they reach their destinations safely and remain viable for their intended scientific use.

Other Support Activities for Road Transportation

POSTED

DEADLINE

Materials Characterization and Quality Validation ServicesThis contract involves the independent verification of micro specimen properties, focusing on microstructure, composition, and mechanical behavior analysis. The services include comprehensive reporting and ensuring traceability throughout the verification process. It is classified under subcontracting and pertains to materials characterization and quality validation, intended to support high standards in material assessment. The contract falls under the NAICS code 541380, aligning with testing laboratories and related services. It is administered by the Department of Commerce's National Institute of Standards and Technology (NIST) and performed in Gaithersburg, Maryland, ZIP code 20899. The work is designed to enhance the accuracy and reliability of material property data, which is critical for subsequent research and development initiatives or quality assurance in manufacturing processes.

Testing Laboratories and Services

POSTED

DEADLINE

Micro-Sized Lead-Free Solder Specimen FabricationThe contract involves the fabrication of micro-sized lead-free solder specimens specifically designed for fracture testing in advanced packaging applications. The focus is on producing specimens with precisely controlled composition and microstructure to meet the requirements for evaluating the mechanical performance of solder materials in microelectronics. This work is crucial for advancing reliable lead-free solder technologies that comply with environmental regulations and enhance device durability. Issued by the Department of Commerce's National Institute of Standards and Technology (NIST), the subcontract aims to support research and development efforts within the advanced packaging industry. The place of performance is Gaithersburg, Maryland, highlighting a location known for its concentration of scientific research. The contract aligns with NAICS code 334419, which pertains to other electronic component manufacturing, indicating that this effort supports manufacturing-related innovation.

Other Electronic Component Manufacturing

POSTED

DEADLINE

Microfabrication of Electroplated Copper Micro SpecimensThis contract involves the design and fabrication of free-standing micro-scale copper specimens with highly controlled geometry, microstructure, and grain size to closely mimic semiconductor interconnects for mechanical testing purposes. The work requires precision microfabrication techniques, focusing on electroplated copper to replicate the physical and material properties of actual semiconductor components used in reliability assessments. The ultimate goal is to provide accurate test specimens that can aid in advancing the understanding of mechanical behavior in microelectronic materials. The subcontract is issued by the Department of Commerce, specifically the National Institute of Standards and Technology (NIST), with the place of performance located in Gaithersburg. The solicitation aligns with NAICS code 334418, indicating a focus on electronic instrument manufacturing. This effort supports the development of standardized testing methodologies by ensuring that specimens closely replicate real-world interconnect conditions at the micro-scale level.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

DEADLINE

Building Automation and Controls EngineeringThis contract involves providing engineering design and integration services focused on building automation, controls, and energy management systems tailored for laboratory and office settings. It is a subcontract opportunity under a Total Small Business Set-Aside program, aligned with NAICS code 541330, which covers engineering services. The contract is associated with the Department of Commerce, specifically the National Institute of Standards and Technology (NIST), and the work will be performed in Gaithersburg, Maryland, ZIP code 20899. The primary objective is to support NIST by delivering expert services that enhance building system efficiency and integration in controlled environments such as labs and offices. This contract emphasizes small business participation and aims to leverage specialized engineering expertise to improve automation and energy management in government facilities.

Engineering Services

POSTED

DEADLINE

Elevator Modernization EngineeringThe contract involves providing engineering services for the modernization and upgrade of elevator systems within NIST facilities, focusing on design, specifications, and ensuring compliance with relevant accessibility and safety standards. It is a subcontract opportunity under a Total Small Business Set-Aside, adhering to FAR 19.5 regulations, specifically falling under NAICS code 541330, which covers engineering services. The Department of Commerce, specifically the National Institute of Standards and Technology (NIST), is the contracting agency, with the work to be performed in Gaithersburg, Maryland (zip code 20899). The contract aims to enhance the reliability, safety, and accessibility of elevator systems at the facilities, aligning with federal standards and requirements.

Engineering Services

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS