Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Bar, Hex Nut

Active
SPMYM4-26-Q-0833 Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This solicitation, identified as SPMYM4-26-Q-0833, is a combined synopsis and solicitation for Bar, Hex Nut under Federal Acquisition Regulation Part 12 and Simplified Acquisition Procedures, with no paper copies available and all information provided exclusively through SAM.gov. The requirement is set aside entirely for small businesses, with the North American Industry Classification System code 332722 and a small business size standard of 600 employees. The evaluation method is Lowest Price Technically Acceptable, and vendors must demonstrate responsibility through SPRS in accordance with FAR 9.104. All responses must be submitted via the required quote form attached to the posting, with only one quote permitted per vendor and all attachments fully completed. The contract is governed by provisions and clauses effective through FAC 2025-06 and DFARS Change Notice 20251110, and contractors are responsible for ensuring compliance with all applicable terms. The solicitation was posted on August 7, 2026, with responses due by August 12, 2026, at 2:00 a.m. Eastern Time, and the performance location is in Honolulu, Hawaii, 96840, with the contracting office based in Pearl Harbor, HI, 96860-5033. The request is managed by DLA Maritime - Pearl Harbor under the Department of Defense, and the primary point of contact is Floyd Shiroma, reachable via email at floyd.shiroma.civ@us.navy.mil. No written solicitation will be issued, and failure to submit a complete and single response using the official form will result in rejection. All interested parties must access and comply with the full text of the referenced regulatory clauses through the provided federal databases.

General Info

Small business set-aside for bar, hex nut via SAM.gov; LPTA evaluation, due August 12, 2026, Honolulu, HI.

Agency

Department Of Defense → DLA Maritime - Pearl HarborView Agency

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer ManufacturingView NAICS

Place of Performance

Honolulu, HI, 96840, USA

Set-Aside

SBA

Documents

(2)

RFQ SPMYM4-26-Q-0833 Bar Hex Nut

PDFrfq

FAR Clauses and Evaluation Provisions for Solicitation

PDFclauses

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseCombined Synopsis
Posted

Combined Synopsis

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DLA Maritime - Pearl Harbor
Contacts1 person available
OfficePEARL HARBOR, HI, 96860-5033, USA
Organization / Agency
Department Of Defense → DLA Maritime - Pearl Harbor
View Agency Profile
Office AddressPEARL HARBOR, HI, 96860-5033, USA
Contacts
Floyd Shiroma

Full Description

Show more

This is a COMBINED SYNOPSIS/SOLICITATION for commercial items prepared in accordance with the information in FAR part 12, using Simplified Acquisition Procedures found at (FAR 13), as supplemented with the additional information included in this notice.  This announcement constitutes the only solicitation; a written solicitation will not be issued.  PAPER COPIES OF THIS SOLICITATION WILL NOT BE AVAILABLE. This combined synopsis/solicitation SHALL be posted to SAM.gov. 


The RFQ number is SPMYM4-26-Q-0833 Bar, Hex Nut.  This solicitation documents and incorporates provisions and clauses in effect through FAC 2025-06 October 1, 2025, and DFARS Change Notice 20251110. It is the responsibility of the contractor to be familiar with the applicable clauses and provisions.  The clauses may be accessed in full text at these address(s):
https://www.ecfr.gov
https://www.acquisition.gov/content/list-sections-affected
http://www.acq.osd.mil/dpap/dars/change_notices.html


The FSC Code is 3950 and the NAICS code is 332722. The Small Business Standard is 600 employees. This requirement is 100% Small Business Set-Aside.


Evaluation criteria are Lowest Price Technically Acceptable (LPTA).  SPRS will be used to determine vendor responsibility.  Potential contractors will be screened for responsibility in accordance with FAR 9.104. 


DLA Weapons Support, Pearl Harbor requests responses from qualified sources capable of providing the requested item(s).   Interested parties must fill out the required request for quote form saved in the attachment section.


  • Requirement is only one quote per vendor.  Multiple quotes will not be accepted.
  • All Attachments posted on this solicitation must be completed and returned.

Similar Contracts

Same NAICS industry code

NAICS: 332722
New
Federal
NSN 5306-01-317-4318, BOLT, CLOSE TOLERANCE - 40A / HELICOPTER, BLACK HAWK UH-60A, UH-60L, HH/UH-60M, UH-60V
Solicitation # SPE4A626R0296
The Defense Logistics Agency Aviation in Richmond is conducting market research to identify potential qualified sources for the close tolerance bolt with NSN 5306-01-317-4318, a critical component used on Black Hawk helicopters including the UH-60A, UH-60L, HH/UH-60M, and UH-60V models. Currently, Avibank Mfg., Inc. and Space-Lok, Inc. are the approved sole source suppliers with part numbers AS616-102 and SLB163-102 respectively. This notice serves purely as an informational solicitation for market research and is not a request for proposals, nor does it obligate the government to award any contract. Responses are voluntary, and no funding is available to cover the costs of preparation or submission. Interested manufacturers or suppliers capable of producing or legitimately obtaining the item may submit information by August 11, 2026, to be considered for future qualification as an approved source. To be formally evaluated as an approved supplier, companies must submit a complete Source Approval Request package in accordance with the JACG SAM HB guidelines, demonstrating that their product meets or exceeds the quality and performance standards of the existing approved items. The SAR package must include all necessary technical data to prove equivalency or superiority. For items without an active solicitation, submissions must be sent directly to the DLA SAR Program Office at the Richmond address. The primary point of contact for inquiries is April Wynn, Acquisition Specialist, reachable at the provided phone number and email. The solicitation is posted under number SPE4A626R0296 with a NAICS code of 332722, and the response deadline aligns closely with the notice's submission window, reflecting a structured yet open process for expanding the supplier base while ensuring strict adherence to quality and specification requirements.
DLA Aviation

POSTED

about 20 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332722
New
Federal
NUT,PLAIN,HEXAGON
Solicitation # N0010426QFE00
This contract pertains to the procurement of plain hexagon nuts designated as Special Emphasis Level I material for critical shipboard systems, where failure could result in catastrophic consequences including loss of life or vessel. The items must strictly comply with MIL-DTL-1222 specifications, including requirements for grade 8 SAE J995 material, hardened and tempered condition, zinc plating per ASTM-B633 Type II Class 5, and specific chemical and mechanical properties. Traceability is mandatory from raw material through final product, requiring unique heat-lot markings, certified test reports, and documentation that cannot be transcribed or qualified with disclaimers. All fasteners must be marked with manufacturer ID, material symbol, and traceability code applied prior to coating using approved MIL-STD-792 methods, with full documentation maintained for inspection. The contract mandates comprehensive quality assurance under ISO-9001 or MIL-I-45208 systems, with Government source inspection rights and 100% verification of material certifications, mechanical testing, and non-destructive examination results. First Article Testing is required with a 180-day submission window and 60-day review period, and all certifications must be submitted through WAWF using specified DODAACs and email notifications prior to shipment. Hydrogen embrittlement relief is mandatory for plated fasteners exceeding specified hardness thresholds, and compliance certification must include bake times and temperatures. No rework or retesting is permitted without PCO approval, and subcontractor oversight is enforced through prime contractor audits and inclusion of contract quality clauses in all purchase orders. Delivery is capped at 365 days post-contract effective date, with all material subject to DO priority rating under DPAS and Buy American Act requirements. The solicitation is restricted to small business set-aside, with full compliance to Navy-specific data submission, waiver procedures, and configuration control processes through ECDS and ECPs.
Navsup Weapon Systems Support Mech

POSTED

about 20 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332722
New
Federal
NAWCAD WOLF - Intent to Sole Source for Turnlocks & Eccentric Pins
Solicitation # N0042126P1291
The U.S. Navy’s Naval Air Warfare Center Air Division is issuing a sole-source solicitation, N0042126P1291, to procure Eccentric Pins with part number CA4480-4 and Turnlocks with part number CA1711 from Howmet Global Fastening Systems under Federal Acquisition Regulation Part 13.106-1(b), bypassing competitive bidding due to the specialized nature of the items and the authorized sole-source relationship. All responses must be submitted via email to Maria A. Sproul no later than 1:00 PM Eastern Standard Time on August 12, 2026, and must originate from a Howmet Global Fastening Systems authorized distributor, with proof of authorization required for consideration. Submission into the SAM.gov database is mandatory for any vendor seeking award consideration, and offers must be firm-fixed-price with no adjustments permitted; the initial quote must reflect the vendor’s best and final offer both on price and technical compliance. Offerors are required to provide specific details including FOB destination, shipping costs, IUID labeling status, Tax ID, Unique Entity ID, CAGE code, small business status, estimated delivery date, and a copy of any applicable pricelist, along with a total quoted amount. The procurement carries no set-aside classification and is designated for large businesses, with performance anticipated at Saint Inigoes, Maryland, near the specified delivery point 20684-4013. While the notice is published as a sole-source intent, the government reserves the right to evaluate any submitted quotes to determine whether future competition is warranted, although no reimbursement will be provided for the submission of information. The contract award, if made, will be based solely on the data received by the deadline and within the parameters of authorized noncompetitive acquisition authority.
Naval Air Warfare Center Air Division

POSTED

about 20 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332722
New
Federal
Screw
Solicitation # SPMYM426Q3629
The solicitation for screws, identified as SPMYM426Q3629, is a Small Business Set Aside under NAICS code 332722, exclusively open to small businesses as defined by the SBA. Proposals must be submitted by August 11, 2026, at 10:00 PM ET, and will be evaluated using the Lowest Price Technically Acceptable method, meaning the lowest responsive offer meeting all technical requirements will be selected. Vendors must complete the HMDRFQINFO form found on pages 29–31 of the solicitation and accurately disclose their business size, including options such as Small, Small-Disadvantaged, Veteran-Owned, Women-Owned, or HUBZone status. Contractors must indicate whether they are quoting as the manufacturer or as an authorized distributor or third-party dealer and confirm their independence in pricing. The CAGE code must be provided, along with the country of origin and estimated delivery time to Pearl Harbor Naval Shipyard, with FOB Destination terms applying. Deliveries are to be made to the specified DoDAAC N32253 at Building 167-1, Recv, 667 Safeguard Street, Pearl Harbor, HI 96860-5033. Vendor responsibility will be assessed via PPIRS in accordance with FAR 9.104, and all responses must be submitted through the SAM.gov portal. Primary point of contact is Quincey Dillenback, with additional support available through DLA Distribution’s customer service line and email.
DLA Maritime - Pearl Harbor

POSTED

about 20 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332722
New
Federal
NUT,HEX,SELF-LOCKIN
Solicitation # N0010426QFE05
This contract mandates the supply of self-locking heavy hex nuts designated as Special Emphasis Level I material, critical to shipboard systems where failure could result in catastrophic consequences including loss of life or vessel. The material must conform to MIL-DTL-32258 with specific chemical and mechanical requirements tied to QQ-N-281 Class A or B, and the self-locking element must comply with ASTM-D6456 or ASTM-D4066 depending on temperature rating. Traceability is strictly enforced through unique heat-lot markings on each component and mandatory certification documentation that must directly link to the physical item, with no transcription permitted. All certifications must include full compliance statements signed by authorized personnel, with disclaimers strictly prohibited. Quality assurance systems must comply with ISO-9001, ISO-10012, and ISO/IEC 17025 or an acceptable alternative including MIL-I-45208 and MIL-STD-45662, subject to government audit at source. First Article Testing requirements are satisfied through prior qualification data or letters from qualified sources, and all material must undergo 100% inspection for traceability marking, certification completeness, and nondestructive testing results. Delivery is governed by a strict schedule requiring certification data submission 20 days prior to shipment and formal acceptance by Portsmouth Naval Shipyard via the WAWF system before any material may be shipped. Final delivery must occur no later than 365 days after contract award, with the order rated DO for national defense priorities. Materials must be mercury-free, marked in accordance with MIL-STD-792, and all internal threads must be cut, not cold-formed. Subcontractor oversight, material handling procedures, and re-certification after processing are tightly controlled, and any deviation or waiver requires prior written approval from the Contracting Officer. All documentation must be submitted electronically through ECDS and WAWF, with notifications sent to designated Navy email addresses, and compliance is monitored under emergency acquisition flexibilities.
Navsup Weapon Systems Support Mech

POSTED

2 days ago

DEADLINE

in 11 days
View Details

More opportunities from Department Of Defense → DLA Maritime - Pearl Harbor

Same awarding agency

NAICS: 335999
New
Federal
Headlamp
Solicitation # SPMYM426Q3630
This solicitation, numbered SPMYM426Q3630, seeks quotations for headlamps under a brand name specification and is designated as a Small Business Set Aside with no size limitation other than small business status. Offerors must provide traceability documentation linking the supplied headlamps directly to the original manufacturer, with acceptable proof including authorized distributor letters, manufacturer website listings, or official quotations from approved sources; failure to submit this information will render the quotation technically unacceptable. Evaluation will follow the Lowest Price Technically Acceptable (LPTA) method, and vendor responsibility will be assessed via PPIRS in accordance with FAR 9.104. Respondents are required to complete the HMDRFQINFO form on pages 23–26 of the solicitation and clearly indicate their business size classification, whether they are quoting as the manufacturer or as an authorized distributor or third-party dealer, and confirm dealer independence for pricing. The CAGE code, place of manufacture, and country of origin must also be declared. Delivery must be FOB destination to Pearl Harbor Naval Shipyard, with estimated delivery times specified in calendar days. The shipping address is in Pearl Harbor, Hawaii, and all proposals must be submitted by the deadline of August 11, 2026. The contracting office is DLA Maritime – Pearl Harbor, with Quincey Dillenback as the primary point of contact.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 20 hours ago

DEADLINE

in 4 days
View Details