Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

BAR, METAL

Active
SPE8E4-26-T-1979Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of 76 linear feet of annealed, round steel bar with a 4.500 inch diameter and a weight of 54.07 pounds per foot, supplied in whole-foot lengths of 10 to 12 feet. The material must conform to Steel Composition 304 and meet technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, including MIL-STD-129R for marking, ASTM A700-14 for preservation and packing, SAE AMS-QQ-S-763D for material spec, and SAE AMS2806 for certification. A Certificate of Quality Compliance, or mill material certification, is mandatory for every shipment and must accompany the product and be forwarded to the DLA Troop Support Contracting Officer. Each unit must carry continuous identification markings including the DLA contract delivery order number, NSN, specification revision, alloy and temper, manufacturer’s heat and lot number, and dimensions, with permitted marking methods limited to stenciling or stamping using non-contaminating, waterproof fluid that remains legible under normal handling. Adhesive labels are required for bars under 0.250 inches nominal OD, and tags are acceptable for wire. Packaging must comply with MIL-STD-2073-1E and DLA Packaging Requirements, with special codes Z and ZZ applied as per ASTM A700. Shipments must be palletized and marked in accordance with the contract’s special marking requirements, including dual unit quantities when applicable. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible to bid on this contract, and any deviation from QSLD requirements must be explicitly declared; non-compliance may result in rejection or criminal penalties for unauthorized substitution. References to government inspections, including COQC and QAP-EQ003, are waived for QSLD-compliant suppliers. The product is designated under NSN 9510-00-189-0606 and is to be delivered FOB origin to DLA Dist San Joaquin in Tracy, CA, 139 days from the contract award, with a permitted quantity variance of plus or minus 10 percent. Inspection and acceptance occur at destination. The shipment must be delivered by January 4, 2027, to meet the original requirement date of November 21, 2026. Packaging

General Info

76 linear feet of 4.5-inch diameter 304 steel bar, QSLD-compliant, FOB origin, delivery by Jan 4, 2027

Agency

Department Of Defense → DLA DIST SAN JOAQUINView Agency

NAICS

332111 - Iron and Steel ForgingView NAICS

Place of Performance

REC WHSE 57, TRACY, CA, 95304-5000, US

Set-Aside

NONE

Documents

(1)

RFQ SPE8E4-26-T-1979 for Metals Construction & Equipment

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DLA DIST SAN JOAQUIN
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → DLA DIST SAN JOAQUIN
View Agency Profile
Office AddressUS
Contacts
Denise Boyle
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
BAR,METAL
BAR, METAL
STEEL COMP 304
HF, ROUND, ANNEALED
4.500 IN DIA
10-12 FT LG
54.07 LB/FT
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
Metal Certification Contract Data Requirements Lists (CDRLs), DD Form 1423s, apply to this procurement. Review the Technical Data Package (TDP) for additional information. If CDRL-METALSCERT is missing from DLA Technical Data Management Transformation (TDMT) they can also be viewed in the DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
A Certificate of Quality Compliance (Mill-Material Certification) is required. A copy of the Certificate of Quality Compliance shall be provided with every shipment to the customer or DLA depot, and a copy of the Certificate of Quality Compliance provided for each shipment shall be forwarded to the DLA Troop Support Contracting Officer identified on the award.
CONTINUOUS IDENTIFICATION MARKINGS ARE REQUIRED IN ADDITION TO THE
MARKING REQUIREMENTS CITED IN THE PROCUREMENT SPECIFICATION:
AS A MINIMUM, EACH UNIT OF ISSUE (FEET,PLATE, OR SHEET) SHALL BE
IDENTIFIED WITH THE (1) DLA CONTRACT DELIVERY ORDER NUMBER, (2) NSN, (3)
SPECIFICATION NUMBER AND REVISION, (4) GRADE,CLASS & TYPE, ALLOY, PART
NUMBER,DIE NUMBER, AND TEMPER, (5) MANUFACTURER'S NAME, HEAT AND LOT
NUMBER, (6) DIMENSIONS.
MATERIAL SHALL BE SUPPLIED WITHIN THE REQUIRED MIN-MAX LENGTH
REQUIREMENTS AND MUST IN WHOLE FEET LENGTH ONLY (I.E. 10, 11, OR 12 FT
EVEN)
PERMISSIBLE MARKING METHODS ARE STAMPING (EXCEPT DIE STAMP) OR
SPE8E4-26-T-1979
SECTION B
STENCILING. THE CHARACTERS SHALL BE OF SUCH A SIZE AS TO BE LEGIBLE AND
VISIBLE TO THE UNAIDED EYE. THE MARKING FLUID APPLIED SHALL NOT
CONTAMINATE, OR OTHERWISE HAVE A DETRIMENTAL EFFECT ON THE PRODUCT OR
ITS PERFORMANCE. THE MARKINGS SHALL BE WATERPROOF AND SUFFICIENTLY
STABLE TO WITHSTAND NORMAL HANDLING.
IN LIEU OF "LINE MARKINGS", ADHESIVE LABELS ARE REQUIRED FOR EACH UNIT
OF STRAIGHT BARS, TUBES AND SHAPES, UNDER 0.250 INCHES IN NOMINAL OD,
AND TO BE SECURELY FASTENED. TAGS WILL BE ACCEPTABLE METHOD FOR WIRES.
FAILURE TO COMPLY WILL BE CAUSE FOR REJECTION OF END PRODUCT."
IY010: QUALIFIED SUPPLIERS LIST FOR DISTRIBUTORS (QSLD) REQUIREMENT (DLA
TROOP SUPPORT JUNE 1994) FOR FSG'S 95 AND 96.
ONLY SUPPLIERS LISTED ON THE QSLD ARE ELIGIBLE FOR AN AWARD PURSUANT TO
THIS SOLICITATION.
SUPPLIERS NOT QUOTING IN COMPLIANCE WITH THE QSLD REQUIREMENT MUST
INDICATE THEY ARE DEVIATING FROM THE REQUIREMENTS OF THE SOLICITATION.
ANY BID/QUOTE/OFFER BASED ON A PRODUCT SUPPLIED BY OTHER THAN AN
APPROVED QSL DISTRIBUTOR, EVEN THOUGH THE PRODUCT MIGHT HAVE BEEN
MANUFACTURED IN ACCORDANCE WITH THE DRAWING(S) AND/OR SPECIFICATION(S)
AS CITED IN THE PURCHASE ORDER
TEXT (POT) IS A BID/QUOTE/OFFER WITH EXCEPTION AND MUST BE SO INDICATED
BY THE
QUOTER/OFFEROR.
ANY PRODUCT FURNISHED UNDER A CONTRACT OR ORDER FOR A PRODUCT DESIGNATED
AS PART OF THE QSL PROGRAM, UNLESS SPECIFICALLY AUTHORIZED BY THE
GOVERNMENT IN WRITING, MUST FULLY COMPLY WITH THE TERMS AND CONDITIONS
OF THE QSL PROGRAM. ANY PRODUCT, WHICH DOES NOT FULLY COMPLY WILL BE
CONSIDERED AN UNAUTHORIZED SUBSTITUTION, AND MAY YIELD CRIMINAL
PENALTIES IN ADDITION TO ANY CIVIL REMEDIES AVAILABLE TO THE GOVERNMENT.
FOR THIS SOLICITATION, AND ANY RESULTING ORDER ISSUED TO AN APPROVED
QSLM/QSLD SUPPLIER
WHOSE QUOTE IS BASED ON COMPLIANCE WITH THE QSL PROGRAM, (EXCEPT IN THE
CASE OF FMS (FOREIGN MILITARY SALE) REQUIREMENTS), REFERENCES TO SOURCE
INSPECTION ARE HEREBY WAIVED. IN SUCH CASES, COQC, PVT, QAP-EQ003, ASQ
H1331, AND RQ006: QUALITY CONFORMANCE INSPECTION REQUIREMENTS, IF
REFERENCED, DO NOT APPLY.
FOR MORE INFORMATION ABOUT THE QSL PROGRAM GO TO THE FOLLOWING WEBSITE:
https://www.dla.mil/TroopSupport/IndustrialHardware/Engineering-and-Tech nical-services/Qualified-Suppliers-List/
-ORWRITE TO: DLA TROOP SUPPORT, ATTN: DLA TROOP SUPPORT FHTF, BLDG 3/B, 700 ROBBINS AVENUE, PHILADELPHIA, PA 19111-5092
Qualification requirements in procurement note #M03 Qualified Suppliers List for Manufacturers (QSLM)/Qualified Suppliers List for Distributors (QSLD) for Troop Support# apply. The full text of procurement note M03 can be found in the DLA Directive (DLAD) of Procurement Notes on the Web at: https://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx.
(END STO)
TDP Rev A Gen 1 IAW BASIC NON GOVT STD SAE AMS-QQ-S-763D REVISION NR D DTD 03/01/2015 PART PIECE NUMBER: CL304, HF, ANNEALED, PICKLED
TDP Rev A Gen 1 IAW REFERENCE QAP 13873 CDRL-METALSCERT-26124 REVISION NR DTD 12/04/2025
SPE8E4-26-T-1979
SECTION B
PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE STD NR MIL-STD-129R(3) REVISION NR R DTD 02/25/2023 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE NON GOVT STD ASTM A700-14 (R 2019) REVISION NR DTD 11/01/2014 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE NON GOVT STD SAE AMS2806 REVISION NR D DTD 12/20/2018 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017422225 0001 FT 76.000
NSN/MATERIAL:9510001890606
DELIVERY (IN DAYS):0139
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 10% MINUS 10%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:0 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:00 OPI:M
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PRESERVATION ZZ = IAW ASTM A700 PACKING Z = ASTM A700 MARKING IAW MIL-STD-129
IP083: Packaging, Marking, and Shipping of Metal Plating, Sheets, and other Metal Products
SPECIAL PACKAGING CODES Z AND ZZ SHALL BE AS SPECIFIED IN ASTM A700.
MARKING Z= MARKING SPECIFICATION(S) LISTED IN CONTRACT AND ADDITIONAL
REQUIREMENTS IN THE PURCHASE ORDER TEXT(POT).
SPE8E4-26-T-1979
SECTION B
PR: 7017422225 PRLI: 0001 CONT’D
ADDITIONAL MARKING REQUIREMENTS: WHEN THE
CONTRACT OR ORDER REFLECTS TWO UNITS
(EXAMPLE: FT-LB, LB-SH, LB-CL, ETC.)
SHIPMENT MARKINGS SHALL INCLUDE THE
QUANTITY OF BOTH UNITS. THIS MARKING
DOES NOT APPLY FOR MATERIAL SHIPPED LOOSE.
PARCEL POST ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
Need Ship Date:01/04/2027 Original Required Delivery Date:11/21/2026
SPE8E4-26-T-1979 NSN/Part Number: 9510-00-189-0606 Quantity: 76 FT Purchase Request: 7017422225QTY: 76 Delivery: 139 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332111
New
DIBBS
CHANNEL, STRUCTURAL
Solicitation # SPE8E4-26-T-1964
The contract specifies the procurement of a structural steel channel made from ASTM A36 steel, with exact dimensional specifications of 1.50 by 2.50 inches, identified by part number 12442180. The finish requires zinc plating per ASTM B633, category SC4 (Fe/Zn 25), type VI, with a prime coating conforming to MIL-DTL-53030 or MIL-PRF-32348, adhering to dry film thickness standards under MIL-DTL-53072, followed by a topcoat compliant with MIL-PRF-22750, type II, in color #24533 semigloss green. All technical and quality requirements referenced are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions tied to solicitations or amendments. The product must conform to MIL-STD-130N for identification marking and be manufactured under an ISO 9001:2008 Quality Management System. A Certificate of Conformance and quality compliance documentation are mandatory, with CDRLs and DD Form 1423s required for delivery verification. The contract calls for 11 units to be delivered FOB origin within 182 days, with zero variance permitted in quantity. Inspection and acceptance occur at the destination point, specifically the DLA Distribution Red River facility in Texarkana, Texas. Packaging must comply with ASTM D3951, prioritized by DLA Master List requirements, and all units must be labeled and palletized per MIL-STD-129 and RP001 packaging standards. The unit of issue is each (EA), priced at $11.00 per unit, with total contract value of $121.00. The NSN for the item is 9520-01-540-5600, and the original delivery requirement was June 3, 2027, with a need ship date of August 5, 2026. The contract is subject to federal acquisition regulations, including FAR 52.246-15 and higher-level quality requirements, and solicitation details are accessible via DIBBS. The contract falls under NAICS code 332111 and is managed by the Department of Defense through the Red River Receiving Building, with Pamela Duff
RED RIVER RECEIVING BLDG

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332111
New
DIBBS
BAR, METAL
Solicitation # SPE8E4-26-T-2003
The contract specifies the procurement of cold drawn, normalized, flat steel bar material composed of SAE 4130 alloy, with a thickness of 1.000 inch, width of 2.000 inches, and length between 10 and 12 feet in whole-foot increments only, with a reference weight of 6.800 pounds per foot. The material must be supplied with a Certificate of Quality Compliance, including mill certification, provided with every shipment and forwarded to the DLA Troop Support Contracting Officer. Continuous identification markings are mandated on each unit, including the DLA delivery order number, NSN, specification revision, alloy and temper, manufacturer’s name, heat and lot number, and dimensions, applied via stamping or stenciling that must be legible, waterproof, and non-contaminating. Adhesive labels are required for bars under 0.250 inches in nominal OD. Packaging must follow MIL-STD-2073-1E and DLA packaging requirements, with special codes Z and ZZ per ASTM A700, and marking in compliance with MIL-STD-129. The NSN is 9510-00-640-4974, quantity is 75 feet, unit price is $75.00 per foot for a total of $5,625, with delivery required within 153 days FOB origin to Tinker AFB, Oklahoma. Quality and technical requirements are governed by the DLA Master List of Technical and Quality Requirements and referenced standards such as SAE AMS-S-6758B and SAE AMS2806. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible; deviations must be explicitly declared, and non-compliant submissions constitute unauthorized substitutions with potential criminal penalties. Shipments must include both units of measure when specified, and the requirement to provide CDRL-METALSCERT-26124 documentation is binding. Source inspection is waived for QSLD-compliant suppliers, eliminating the need for additional quality conformance inspections under referenced protocols.
DEPOT OKLAHOMA

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332111
New
DIBBS
BOLT, MACHINE
Solicitation # SPE4A6-26-T-13UR
This contract specifies the procurement of 243 machine bolts identified by NSN 5306-01-535-2413 and part number AN4C45A, classified as a commercial item defined by consensus non-government standards under NASM3 through NASM20 Revision 5 dated 02/28/2025. The item must comply with all technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with verification governed by MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect sampling unless otherwise mandated. All Class 3A and 3B threads must be gaged in accordance with SAE AS8879 Category 1 or MIL-S-7742 safety-critical standards, excluding self-locking nuts and threads below specified diameters. Identification markings must follow MIL-STD-130N paragraph 4.1.b(2), supplemented by standard manufacturer and material marks. The hardware must be manufactured to the current revision of the governing standard at the time of production, with prior revisions acceptable only if they were current when the item was made. Packaging and labeling requirements mandate compliance with ASTM D3951, but are subordinate to DLA Master List provisions, requiring all packaging to be marked and labeled per MIL-STD-129 with unit of issue and quantity per unit pack as specified. Palletization must adhere to DLA Packaging Requirements for Procurement. The delivery is FOB origin with a 156-day lead time, and the item must be delivered by January 17, 2027, with no tolerance for quantity variance. Inspection and acceptance occur at the destination facility in New Cumberland, Pennsylvania, with all shipping details directed to the DLA Distribution Center. The contract references DLA Procurement Notes C19 and C20 for freight and first-destination transportation protocols, and the point of contact for inquiries is Sommer Yates with the Department of Defense, ASC Commodities Division.
ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332111
New
DIBBS
BAR, METAL
Solicitation # SPE8E9-26-T-3379
This procurement contract specifies the supply of carbon steel bars meeting ASTM A108 Grade 1045 cold drawn specifications, with a diameter of 1 inch and lengths of 10 to 12 feet in whole-foot increments only. Each shipment must include a Certificate of Quality Compliance (Mill-Material Certification) delivered to the customer or DLA depot, with a copy forwarded to the DLA Troop Support Contracting Officer. Mandatory continuous identification markings are required on every unit, including the DLA contract delivery order number, NSN, specification revision, grade, manufacturer's heat and lot number, and dimensions, applied via stamping or stenciling using waterproof, non-contaminating ink that remains legible under normal handling. Adhesive labels are required for bars under 0.250 inches nominal OD, while tags are acceptable for wire, and failure to comply will result in rejection. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129, with special marking codes Z and ZZ as defined by ASTM A700, and palletization must follow DLA packaging requirements. The material is designated as a Critical Application Item, and all deliveries are FOB origin with a 10% quantity variance allowance, inspected and accepted at destination. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible for award under this solicitation; any deviation from this requirement must be explicitly noted. Non-compliant bids are considered unauthorized substitutions and may incur criminal penalties. The contract waives source inspection requirements for qualified QSLD suppliers, relieving them of obligations under COQC, PVT, QAP-EQ003, ASQ H1331, and RQ006. Two line items are specified: 2 feet and 651 feet, both with the same NSN and delivery terms, with a total quantity of 653 feet to be shipped by January 18, 2027, against an original required delivery date of November 21, 2026. Delivery is directed to two DLA facilities in New Cumberland, PA, and Tracy, CA, with transportation governed by DLAD Procurement Notes C19 and C20. All technical and quality requirements referenced are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue date.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332111
New
DIBBS
BAR, METAL
Solicitation # SPE8E4-26-T-2008
Steel bar material compliant with specification 4130, cold finished and normalized, is required in a 0.500 inch diameter and 10 to 12 foot length, delivered in whole foot increments only, with a reference weight of 0.668 pounds per foot. This item is designated as a critical application product and must fully conform to technical standards including SAE AMS-S-6758B, MIL-STD-129R, ASTM A700-14, and SAE AMS2806. Each unit must carry continuous identification markings that include the DLA contract delivery order number, NSN, specification revision, alloy grade, manufacturer name, heat and lot number, and dimensions, applied via stamping or stenciling in a legible, waterproof, and durable manner. Adhesive labels are required for bars under 0.250 inches in diameter and tags for wire. Certification of quality compliance, including mill material data, must accompany every shipment and be submitted to the DLA Troop Support Contracting Officer. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible to respond; any deviation from this requirement must be explicitly noted and constitutes an exception. Packaging must adhere to MIL-STD-2073-1E and DLA packaging requirements, with preservation methods in accordance with ASTM A700 and special codes Z and ZZ. Marking and labeling shall fully comply with MIL-STD-129, including the use of vinyl or plastic-coated pressure-sensitive labels where authorized. The delivery is FOB origin, with inspection and acceptance occurring at destination, within a 64-day timeline, with a 10% variance in quantity permitted. The product is subject to defense information controls and all applicable DLA technical and quality requirements referenced through the DLA Master List. Supply chain compliance, material origin, and certification are strictly enforced, with noncompliance potentially resulting in rejection of goods and criminal penalties.
DEPOT OKLAHOMA

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332111
New
DIBBS
HEAD, SAFETY, PRESSURE R
Solicitation # SPE8E6-26-T-4003
The contract pertains to the procurement of a commercial item identified as HEAD, SAFETY, PRESSURE RELIEF with NSN 4820011548123 and part number 03787 from AMEREX CORPORATION, for a quantity of 89 units at a unit price of $89.00, totaling $7,921.00. Delivery is required within seven days of award, FOB origin, with no tolerance for quantity variance, and inspection and acceptance will occur at the destination. All packaging must comply with ASTM D3951 as superseded by applicable DLA Master List of Technical and Quality Requirements, with labeling and marking strictly following MIL-STD-129, and palletization adhering to RP001 DLA Packaging Requirements. The item is subject to Defense Logistics Agency regulations governing commercial items, including provisions for the removal of government identification from non-accepted supplies. The required delivery date is October 18, 2026, with a need ship date of August 25, 2026. Shipping must follow DLAD Proc Notes C19 and C20, and the deliver-to address is DLA Distribution Depot Hill at Hill Air Force Base, Utah, with the contract reference SPE8E6-26-T-4003. The solicitation was posted on August 5, 2026, with responses due by August 17, 2026, under NAICS code 332111, and is managed by the Department of Defense through Depot Hill.
DEPOT HILL

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332111
New
DIBBS
PIN, STRAIGHT, HEADLESS
Solicitation # SPE4A6-26-T-13HQ
The contract is for 28 straight headless pins with NSN 5315-01-225-0667 and is issued under solicitation SPE4A6-26-T-13HQ by the Defense Logistics Agency’s ASC Commodities Division. The delivery deadline is 142 days after award, and responses are due by August 13, 2026. The item is subject to stringent quality and packaging requirements outlined in the DLA Master List of Technical and Quality Requirements, which governs all referenced R and I numbers. Critical item source inspection is mandatory, and all sampling must comply with MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance criteria unless otherwise stated; unspecified attributes are treated as major with a verification level of IV or an AQL of 1.0. Physical identification and bare item marking are required, and the item’s technical data is subject to export controls under ITAR or EAR, restricting disclosure to foreign persons and requiring compliance with DFARS 252.225-7048. Access to controlled technical data is limited to contractors with approved US/Canada Joint Certification Program status, valid DOD export control training, and DLA authorization. The place of performance is New Cumberland, PA, and the NAICS code is 332111 for metal forgings and stampings, indicating the supplier must meet federal procurement standards for this precision component.
ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332111
New
DIBBS
BAR, METAL
Solicitation # SPE8E4-26-T-1948
The contract specifies the procurement of steel bar material classified as COMP 302, supplied in hot rolled hexagonal shape, annealed condition, with a width of 0.625 inches across flats and lengths ranging between 8 and 12 feet, sold by the foot at a reference weight of 1.150 pounds per foot. The material must be supplied in whole-foot increments only and meet exact dimensional tolerances. Comprehensive quality and technical requirements are mandated under the DLA Master List of Technical and Quality Requirements, with certifications including a Certificate of Quality Compliance Mill-Material Certification required for every shipment, to be provided to both the customer and the DLA Troop Support Contracting Officer. Continuous identification markings are mandatory on each unit including the DLA contract delivery order number, NSN, specification revision, alloy grade, manufacturer's heat and lot number, and dimensions. Marking methods are restricted to stenciling or approved stamping, with labeling using waterproof, non-contaminating inks. Adhesive labels are required for bars under 0.250 inches in nominal outer diameter, and tags are acceptable for wire. All suppliers must be listed on the Qualified Suppliers List for Distributors (QSLD) to be eligible for award, and any deviation from this requirement must be explicitly declared, with noncompliance treated as an unauthorized substitution potentially subject to criminal penalties. Packaging must conform to MIL-STD-2073-1E and DLA packaging requirements, with preservation and marking governed by ASTM A700 and MIL-STD-129R, including special codes Z and ZZ for preservation and marking. Labels must be secure, legible, and resistant to handling, with additional marking rules applying when shipments involve dual units of measure. Delivery is FOB origin, with inspection and acceptance occurring at destination, under a 167-day delivery schedule with a 10% quantity variance allowance. The NSN is 9510-00-265-1650, with a total quantity of 54 feet and a unit price of $54.00 per foot, shipped to the DLA Distribution facility in New Cumberland, PA. All documentation referenced in the Technical Data Package including CDRL-METALSCERT, SAE AMS-S-7720B, ASTM A700-14, and MIL-STD-129R govern compliance, and QSL program waivers apply for qualified suppliers,
DDSP NEW CUMBERLAND FACILITY

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332111
New
DIBBS
BAR, METAL
Solicitation # SPE8E4-26-T-1951
The contract specifies the procurement of 30 feet of steel bar, composed of grade 303 stainless steel, in a cold-finished hexagon shape with an annealed temper, measuring 0.875 inches across flats and supplied in whole-foot lengths of 10, 11, or 12 feet, with a reference weight of 2.307 pounds per foot. Material must comply with ASTM A582/A582M and SAE AMS2806 standards, and a Certificate of Quality Compliance, also known as a mill-material certification, must accompany every shipment and be forwarded to the DLA Troop Support Contracting Officer. All units must be permanently marked with the DLA contract delivery order number, NSN, specification revision, alloy and temper, manufacturer’s name, heat and lot number, and dimensions using approved methods such as stenciling or adhesive labels; stamping is permitted except for die stamping, and marking fluids must not contaminate the product. Packaging must follow MIL-STD-2073-1E and MIL-STD-129, with special labeling codes Z and ZZ per ASTM A700, and palletization must adhere to DLA packaging rules. The delivery is FOB origin, with inspection and acceptance occurring at the destination, and a 10% variance in quantity is allowed. The item is designated under NSN 9510-00-293-5009 and must be delivered by February 1, 2027, to the DLA Distribution facility in New Cumberland, Pennsylvania. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible to respond, and non-compliance constitutes an unauthorized substitution with potential criminal penalties. The contract waives source inspection requirements for qualified suppliers, and CDRL-METALSCERT documentation must be provided if not already available in the DLA system.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332111
New
DIBBS
ANGLE, STRUCTURAL
Solicitation # SPE7M2-26-T-6018
This contract specifies the procurement of structural angle steel with a flange thickness of 0.250 inch, an overall width and height of 1.250 inches, and a 90-degree angle configuration. The material must be supplied in whole-foot lengths between 20 and 30 feet, with square ends and a reference weight of 1.92 pounds per foot. The product must comply with ASTM A36/A36M-19 specifications and is classified as a critical application item. All units must be identified with mandatory markings including the DLA contract delivery order number, NSN, specification revision, grade, alloy, part number, die number, temper, manufacturer’s name, heat and lot number, and dimensions. Markings must be legible, waterproof, and applied via stamping or stenciling without contaminating the material; adhesive labels are required for units under 0.250 inch nominal OD, and tags are acceptable for wire. Packaging must follow MIL-STD-2073-1E and RP001 requirements, with no mercury or mercury compounds permitted in preservation, packaging, or labeling except for specific functional uses exempted by NAVSEA guidance. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible to receive award under this solicitation, and any deviation from this requirement must be explicitly declared. The QSL program waives source inspection, COQC, PVT, QAP-EQ003, ASQ H1331, and RQ006 requirements for qualified suppliers, provided the product fully complies with the program’s terms. Non-compliance risks rejection of the product and potential criminal penalties for unauthorized substitutions. Material certification must be provided per CDRL-METALSCERT requirements, and the full technical and quality requirements are governed by the DLA Master List. The total quantity ordered is 2,992 feet, to be delivered FOB origin to Tracy, CA, within 202 days from award date. The contract allows for a 10% variance in quantity, with acceptance and inspection occurring at destination, and shipping must adhere to MIL-STD-129 marking standards with no special marking codes applied.
NUCLEAR REACTOR PROGRAM

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332111
New
DIBBS
BEARING, SLEEVE
Solicitation # SPE4A6-26-T-13EU
The contract pertains to the procurement of 28 sleeve bearings with NSN 3120-01-075-2046 under solicitation SPE4A6-26-T-13EU, issued by the Defense Logistics Agency's ASC Commodities Division. Delivery is required within 128 days after order, with performance located in Tracy, California. The item is subject to strict quality control requirements, mandating sampling per MIL-STD-1916 or ASQ H1331 Table 1 using a zero-defect acceptance criterion unless otherwise stipulated. Critical, major, and minor attributes are assigned verification levels VII, IV, and II respectively, or AQLs of 0.1, 1.0, and 4.0, with unspecified attributes treated as major. Measuring and test equipment must meet approved standards, and the manufacturer is expected to comply with all applicable quality assurance provisions. The technical data associated with this item is controlled under export regulations—either ITAR or EAR—and may not be disclosed to foreign persons, including those within the United States, without prior authorization from the Department of State or Commerce. DFARS 252.225-7048 governs access, and only DLA contractors with approved US/Canada Joint Certification Program status, who have completed mandatory training and questionnaire requirements, are permitted to handle the data. The contractor must also be certified under CMMC Level 2 by a C3PAO, and all covered defense information is subject to cybersecurity protections as defined by RD002. The contract was posted on August 5, 2026, with bids due August 13, 2026, under NAICS code 332111 for Federal procurement.
ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332111
New
DIBBS
ANGLE, STRUCTURAL
Solicitation # SPE8E4-26-T-1984
Structural steel angles meeting ASTM A6 Table A2.8 specifications for unequal legs are required, with an overall height of 2.000 inches, width of 3.000 inches, and a flange thickness of 0.250 inches. The material must be produced from Grade A rolled steel, rated at approximately 4.1 pounds per foot, and supplied in whole-foot lengths between 10 and 12 feet. All material must conform to the American Bureau of Shipping’s Rules for Building and Classing Steel Vessels, Part 2, Section 1, with supplementary requirements from Appendix 2/D, and must originate from an approved steel mill. Continuous identification markings are mandatory, including the DLA contract delivery order number, NSN, specification revision, grade, manufacturer’s name, heat and lot number, dimensions, and other specified data, applied via stamping or stenciling in legible, waterproof, non-contaminating form. Each shipment must include a Certificate of Quality Compliance and adhere to MIL-STD-129R marking standards with preservation methods specified in ASTM A700. The product is designated a critical application item and is subject to the Qualified Suppliers List for Distributors requirement, restricting procurement to approved QSLD suppliers only; non-compliant bids are considered deviations and subject to penalties. The material must also bear the “AB” marking per MIL-S-22698 and include an ABS surveyor’s endorsement on all certifications. Packaging must follow DLA’s RP001 and MIL-STD-2073-1E guidelines, with palletization and shipping directed to the DDSP New Cumberland facility. Delivery is due within 83 days of contract award, with a required ship date of November 9, 2026, and a quantity of 962 linear feet, subject to a plus or minus 10 percent variance. Cybersecurity Maturity Model Certification Level 2 self-assessment and handling of covered defense information are required. All technical and quality requirements referenced under RA001, RD002, RD004, and RQ011 are incorporated by reference from the DLA Master List.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details

More opportunities from Department Of Defense → DLA DIST SAN JOAQUIN

Same awarding agency

NAICS: 541690
New
DIBBS
Hazardous Materials Labeling and Compliance for Defense SupplyThe contract requires the provision of compliant hazard warning labels and Safety Data Sheets for hazardous materials shipped to DLA Distribution San Joaquin in Tracy, California, with strict adherence to OSHA’s Hazard Communication Standard (29 CFR 1910.1200) and MIL-STD-129 marking specifications. All labels must accurately convey chemical hazards, precautionary statements, and product identification, while the accompanying SDS must follow the Globally Harmonized System format and be current, complete, and accessible to end users. The materials must be properly marked and documented to ensure regulatory compliance and operational safety throughout the defense supply chain. This subcontract, classified under NAICS code 541690, is issued by the Department of Defense through DLA Distribution San Joaquin and is open for responses until August 17, 2026. The place of performance is specified as Tracy, CA, with a ZIP code of 95304-5000. The solicitation is posted on the DIBBS platform under reference number SPE8E826T4992, and vendors must ensure their proposed solutions meet federal defense logistics requirements for hazard communication and material handling. Failure to comply with labeling or SDS standards may result in rejection of shipments and potential contract penalties.
Other Scientific and Technical Consulting Services

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541511
New
DIBBS
Electronic Invoicing and WAWF Submission ServicesThe contract requires the preparation and timely submission of electronic invoices and receiving reports through the Wide Area WorkFlow system in full compliance with DFARS 252.232-7003, covering both fixed-price and cost-type contract line items. This obligation ensures accurate, secure, and standardized digital documentation aligned with Department of Defense financial and procurement standards. The work is to be performed in Tracy, California, with a zip code of 95304-5000, and falls under a Total Small Business Set-Aside as defined by FAR 19.5, reserving the opportunity exclusively for small businesses certified by the SBA. The NAICS code 541511 indicates this is an information technology services contract, specifically focused on custom computer programming services related to invoice and reporting automation. The solicitation was posted on August 5, 2026, with a response deadline of August 17, 2026, and is classified as a subcontract under the DLA San Joaquin office, part of the Department of Defense procurement network.
Custom Computer Programming Services

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334511
New
DIBBS
Specialty Item Supply: Controller, Special (NSN 4510251497100)The contract awards the supply of 28 units of CONTROLLER, SPECIAL with NSN 4510251497100 at a unit price of $28.00, requiring full compliance with packaging, labeling, and delivery specifications to Tracy, CA, with a zip code of 95304-5000. The procurement is structured as a subcontract under a Total Small Business Set-Aside, as defined by FAR 19.5, ensuring only small business concerns are eligible to respond. The North American Industry Classification System code is 334511, indicating the industry category tied to the manufacturing of navigational, Measuring, Electromedical, and Control Instruments. The solicitation was posted on August 5, 2026, with all responses due by August 17, 2026, and the awarding agency is DLA DIST SAN JOAQUIN under the Department of Defense, with performance obligations centered exclusively in Tracy, California.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity Compliance (NIST SP 800-171) Assessment and ImplementationThe contract requires the implementation of NIST SP 800-171 cybersecurity controls to safeguard Controlled Unclassified Information within the covered systems. The contractor must complete a comprehensive self-assessment of compliance with all 110 security requirements outlined in the standard, document findings, and submit the resulting scorecard to the Supplier Performance Risk System. The effort also includes ongoing support for the protection of CUI through technical and procedural measures, ensuring alignment with federal guidelines, as well as readiness to report any cyber incidents in accordance with applicable DoD protocols. The work is scoped under a Total Small Business Set-Aside, meaning only small businesses registered with the SBA are eligible to bid, and the performance location is designated as Tracy, California with a zip code of 95304-5000. The solicitation was posted on August 5, 2026, and responses are due by August 17, 2026, under the NAICS code 541512 for Computer Systems Design Services.
Computer Systems Design Services

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332999
New
DIBBS
Military Packaging and Preservation ServicesThis contract requires the provision of military-compliant packaging, preservation, and marking services for defense-related materiel, strictly adhering to DLA standards and MIL-STD-129 requirements. The work involves the application of VCI corrosion inhibitors, desiccants, hermetic sealing techniques, and barcoding systems to ensure long-term protection, traceability, and compliance with federal military specifications. All packaging processes must be executed in a manner that guarantees the integrity of equipment and supplies during storage and transport under demanding operational conditions. The solicitation is structured as a subcontract under a Total Small Business Set-Aside, exclusively reserved for small businesses as defined by the SBA, with the NAICS code 332999 indicating it falls under Other Miscellaneous Manufacturing. Performance will take place at a designated location in Tracy, California, with a zip code of 95304-5000. Proposals must be submitted by the deadline of August 17, 2026, following the release date of August 5, 2026, and will be managed by the DLA San Joaquin office under the Department of Defense. Interested parties must access the solicitation through the official DIBBS portal to ensure full compliance with submission protocols.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance & Labeling ServicesThis contract requires the provision of comprehensive hazard communication labeling services for hazardous materials, ensuring full compliance with OSHA and MIL-STD-129 standards. The scope includes the preparation and submission of pre-award documentation, as well as detailed analysis of regulatory exceptions to support legal and operational adherence. All labeling must meet federal requirements for workplace safety and military logistics, with an emphasis on accuracy, clarity, and traceability throughout the supply chain. The work is to be performed at Tracy, California, with a 95304-5000 zip code designation, and the contract is structured as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the SBA are eligible to bid. The NAICS code 541690 indicates this falls under other scientific and technical consulting services, specifically aligning with regulatory compliance and safety consulting activities. The solicitation was posted on August 5, 2026, and responses are due by August 17, 2026, with the contracting office affiliated with the Department of Defense through DLA Dist San Joaquin.
Other Scientific and Technical Consulting Services

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332999
New
DIBBS
Precision Mechanical Component Manufacturing for Manual Control LeverThe contract calls for the manufacture of a precision manual control lever with NSN 5340003440745, a defense-grade mechanical component essential for industrial or military systems. Production must utilize casting or forging processes and require specialized tooling to meet exacting military standards, ensuring reliability and durability under demanding operational conditions. The work is designated as a total small business set-aside under SBA guidelines, meaning only small businesses are eligible to compete, and the NAICS code 332999 applies to other fabricated metal product manufacturing. Performance is required at Tracy, California, with a ZIP code of 95304-5000, and all deliverables must comply with defense-related specifications without exception. The solicitation was posted on August 5, 2026, and responses are due by August 17, 2026, leaving a twelve-day window for qualified small businesses to submit proposals. The contracting entity is DLA Dist San Joaquin under the Department of Defense, and the contract is structured as a subcontract, indicating it supports a larger procurement effort. While no point of contact details are provided, the official solicitation can be accessed via the DIBBS portal using the provided link. All participants must ensure adherence to quality, timing, and regulatory requirements for defense production, with no allowances for non-compliance or deviations from the specified manufacturing methods.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: NA
New
DIBBS
Unable to Identify Subcontract OpportunitiesNo subcontract opportunities can be identified due to an inability to retrieve prime contract details, as system timeouts have prevented access to essential information such as scope, CLINs, agency specifics, and other metadata required for decomposition. The solicitation, posted on August 5, 2026, with a response deadline of August 17, 2026, is categorized as a subcontract under the DLA DIST SAN JOAQUIN agency within the Department of Defense, but no NAICS code, set-aside type, or point of contact is provided. The place of performance is listed as Tracy, California, with a zip code of 95304-5000, though the city, state, and country fields for the office address remain undefined. The contract’s full details are only accessible via the DIBBS system link, but attempts to extract actionable subcontract data have been thwarted by technical limitations.

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance & LabelingThe contract titled Hazardous Materials Compliance & Labeling requires the provision of OSHA-compliant hazard communication materials for all hazardous substances contained in delivered items, specifically including Globally Harmonized System labels and Safety Data Sheets that meet federal regulatory standards. These materials must be accurately generated, formatted, and delivered in alignment with OSHA’s Hazard Communication Standard to ensure worker safety and regulatory adherence throughout the supply chain. The work is scoped to support items delivered to the specified place of performance in Tracy, California, with the ZIP code 95304-5000, and must be completed in accordance with all applicable federal safety and documentation protocols. This is a subcontract issued under NAICS code 541690 by the Department of Defense through DLA Dist San Joaquin, with a response deadline of August 17, 2026. The solicitation was posted on August 5, 2026, and all submissions must be received by the stated deadline to be considered. While no specific set-aside designation is provided, the contract is explicitly structured as a subcontract, implying it is part of a larger procurement effort. Contractors must be fully versed in GHS labeling requirements and SDS formatting to meet compliance obligations without delay or error, ensuring seamless integration into the recipient’s hazardous materials management system.
Other Scientific and Technical Consulting Services

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333414
New
DIBBS
Condensing Unit Supply (HVAC Equipment)The contract entails the supply of six commercial off-the-shelf condensing units identified by NSN 4130016572911, intended for use in refrigeration and cooling systems. These units must fully comply with military packaging and marking standards to ensure compatibility with defense logistics and handling protocols. The procurement is classified as a subcontract under the NAICS code 333414, which corresponds to HVAC equipment manufacturing. The offering is managed by DLA Dist San Joaquin under the Department of Defense, with the place of performance located in Tracy, California, at ZIP code 95304-5000. Solicitation for this contract was posted on August 5, 2026, and responses are due by August 17, 2026. All deliveries must meet the specified technical and logistical requirements, including adherence to military specifications for packaging and labeling, to support seamless integration into defense supply chains. The contract is not subject to any set-aside classifications and is accessible through the DIBBS platform for potential vendors seeking to respond.
Heating Equipment (except Warm Air Furnaces) Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 493190
New
DIBBS
Defense Logistics Shipment & Labeling ServicesThe contract requires the packaging, marking, and shipment of safety belts in strict accordance with MIL-STD-129 standards and the Defense Logistics Agency’s Vendor Shipment Module requirements. All items must be properly labeled, documented, and prepared for military logistics distribution, ensuring full compliance with federal defense shipment protocols. The work is to be performed at a designated location in Tracy, California, with the zip code 95304-5000 serving as the place of performance. This is a subcontract opportunity under the NAICS code 493190, which categorizes it under other warehousing and storage services, and is managed by the DLA Dist San Joaquin office under the Department of Defense. Bidders must submit responses by the deadline of August 17, 2026, with the solicitation posted on August 5, 2026. There is no set-aside designation specified, meaning the opportunity is open to all eligible subcontractors regardless of size or certification status. Participation requires familiarity with DLA’s electronic vendor systems and adherence to stringent military packaging and identification guidelines. The contract is accessible via the DIBBS portal using the reference number SPE8E626T4031, and successful performers will support the defense supply chain by ensuring timely and accurate delivery of critical safety equipment to military endpoints.
Other Warehousing and Storage

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance & Labeling SupportThe contract requires the preparation of Safety Data Sheets and hazard warning labels for hazardous materials used in the manufacturing or packaging of safety belts, ensuring full compliance with OSHA and Department of Defense regulations. All deliverables must meet federal standards for hazard communication, accuracy, and readability, with strict adherence to mandated content, format, and language requirements. The work is tied to operations in Tracy, California, with the place of performance specified at ZIP code 95304-5000, and the solicitation is classified as a subcontract under NAICS code 541690, which covers other scientific and technical consulting services. The solicitation was posted on August 5, 2026, and responses are due by August 17, 2026, with the contracting activity managed by DLA Dist San Joaquin under the Department of Defense. While no set-aside type or specific point of contact is indicated, contractors must be prepared to demonstrate capability in handling classified or sensitive defense-related materials and producing compliant documentation under tight deadlines. All submissions must align with the DIBBS system referenced in the UI link, and successful offerors will be expected to support ongoing defense manufacturing efforts with reliable, audit-ready safety documentation.
Other Scientific and Technical Consulting Services

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details