Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

This Government Contract opportunity from New Hampshire was posted on August 5, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Bedrock Well Drilling & Development

Closed
State & Local

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 213111
New
SLED
ODNR, Division of Oil & Gas – OWP – Federal Project –Scioto 3F - 2 Wells
Solicitation # SRC0000042633
The Ohio Department of Natural Resources, Division of Oil and Gas Resources Management, is soliciting bids for the Scioto 3F Project to plug and plate two orphan wells, Oertels Corner #1 and Romanello #1, located in Jefferson Township, Scioto County. The scope of work encompasses mobilization, well site development, drilling or cleaning out and plugging of the wells, decommissioning and disposal of all casing and production equipment, and full restoration of disturbed areas. Key technical deliverables include the installation of cement plugs from 210 feet to within 30 inches of ground level and the maintenance of strict well control throughout the process. Work must be performed in accordance with Ohio Revised Code 1509 and Ohio Administrative Code Chapters 1501:9-11 and 1501:9-12. As a federally funded project, contractors must comply with Davis-Bacon prevailing wage requirements and Buy America sourcing mandates for iron, steel, and manufactured construction materials. Eligible bidders must be active on CSP900922 (DAS Index No. MAC110), attend the mandatory pre-bid meeting on November 4, 2026, and be in good standing with the agency. The contract will be awarded to the lowest responsive and responsible bidder based on submissions via OhioBuys. Performance must begin within three months of the contract end date and be completed by May 1, 2027, or five months after the effective date, whichever is sooner. Invoicing is managed through the Orphan Well Project Management Contractor Portal and requires supporting documentation, including payroll reports for federal compliance.
Dnr900200 Oil And Gas Dnrfra

POSTED

5 days ago

DEADLINE

in 22 days

AI Contract Overview

Show more

The Department of Natural and Cultural Resources for the state of New Hampshire is seeking a subcontractor for a bedrock well drilling and development project. The scope of work requires the drilling of two wells to a depth of 800 feet using air rotary, mud rotary, or cable tool methods. The selected contractor will be responsible for installing steel casing, performing well development to ensure turbidity levels remain below 5 NTU, and completing necessary pump testing and water sampling. This opportunity was posted on August 5, 2026, with a response deadline of August 21, 2026. The project falls under NAICS code 213111 and involves installations at Lake Sunapee State Beach and the Mount Sunapee Trails Bureau Workshop.

General Info

New Hampshire seeks subcontractor to drill and develop two 800-foot bedrock wells.

Documents

This scope was carved out of b3f20496-218d-473c-8311-e714b9e7f240.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

INVITATION TO BID FOR 2 WELL INSTALLATIONS AT LAKE SUNAPEE STATE BEACH AND MT. SUNAPEE TRAILS BUREAU WORKSHOP

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyNew Hampshire → Department Of Natural & Cultural Resources
ContactsNo contacts available
OfficeN/A
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Drill two 800-foot deep bedrock wells using air rotary, mud rotary, or cable tool methods; install steel casing; perform well development to achieve turbidity <5 NTU; conduct pump testing and water sampling.

More opportunities from New Hampshire → Department Of Natural & Cultural Resources

Same awarding agency

NAICS: 541380
New
SLED
RFB 2027-2029 Magnetic Rope Testing at Cannon Mountain
Solicitation # RFB 2027-2029 Magnetic Rope Testing at Cannon Mountain
The New Hampshire Department of Natural and Cultural Resources is seeking a vendor to provide non-destructive electromagnetic wire rope testing and inspection services at the Cannon Mountain Aerial Tramway and Ski Area for the 2027 through 2029 period. The scope of work includes testing four 51mm track cables, the 36mm upper haul rope, the 32mm lower haul rope for the Aerial Tramway, and the complete length of the 38mm Peabody Express detachable lift haul rope. The selected contractor must provide all necessary labor, equipment, and instrumentation to identify wire breaks, loss of metallic area, or other anomalies, delivering detailed written inspection reports and recommendations for corrective action. The contract will be awarded to the compliant vendor offering the lowest total cost. Bids must be submitted by November 16, 2026, and must be signed and notarized. Eligible vendors must be registered with the NH Bureau of Purchase and Property and, if applicable, be in good standing with the NH Secretary of State. Required insurance includes comprehensive general liability of at least 1,000,000 dollars per occurrence and 2,000,000 dollars aggregate, along with workers compensation. Performance is scheduled between 7:00 A.M. and 4:00 P.M., requiring ten days advance notice for scheduling. Invoices are to be submitted monthly, with payment issued within 30 days upon the state's satisfaction and acceptance of the work.
Testing Laboratories and Services

POSTED

6 days ago

DEADLINE

in 19 days
View Details
NAICS: 722310
New
SLED
Food Service Concession: Cannon Mountain & Flume Gorge RFP
Solicitation # c4e6e5f7-4aea-45fe-b07f-918990b8bbd2
The State of New Hampshire Department of Natural and Cultural Resources, Division of Parks and Recreation, is seeking proposals from New England regional or New Hampshire-based hospitality firms to operate food service concessions at Cannon Mountain Aerial Tramway and Ski Area and the Flume Gorge/Gilman Visitors Center. The scope of work includes managing multiple fixed venues such as the 4080ft Cafe, Peabody Base Lodge Food Court, Cannonball Pub, Notchview Lodge Cafe, and the Mittersill Performance Center, as well as overseeing mobile food trucks and off-site events within Franconia Notch State Park. The selected concessionaire will be responsible for food and beverage operations, including the management of four facilities with liquor licenses, catering for special events, and the cleaning and maintenance of designated areas. The contract is intended to commence on May 1, 2027, with an in-service date of May 26, 2027. It carries an initial ten-year term, pending approval by the Governor and Executive Council, with an option for the vendor to extend for two additional five-year periods. Proposers must commit to a minimum facility investment of 1,000,000 dollars for purchase, design, and construction. Evaluation of proposals will be based on the operating plan (30%), financial commitment including commission rates (30%), experience and qualifications (30%), and the promotion of New Hampshire tourism (10%). Selected firms must maintain general liability, liquor liability, and workers compensation insurance, along with all necessary state and local permits. The concessionaire is required to implement written quality assurance procedures and maintain records according to generally accepted accounting principles, verified by a Certified Public Accountant. Proposals are due by January 1, 2027, and must be submitted via USB flash drive along with five hard copies. Final award consideration may include in-person presentations and interviews with the highest-scoring firms.
Food Service Contractors

POSTED

6 days ago

DEADLINE

in 2 months
View Details
NAICS: 236220
SLED
Renovations to the existing Tip Top House historic site located at Mount Washington State Park as stated within specifications document and attached construction drawings.
Solicitation # HST 2604
The New Hampshire Department of Natural and Cultural Resources is soliciting bids for the renovation of the Tip Top House historic site located at Mount Washington State Park. This stipulated lump sum project involves selective demolition and interior renovations, including floor repairs, door and hardware updates, selective painting, and the installation of owner-furnished ceiling boards. A primary focus of the contract is updating the electrical systems to current code requirements, which includes the delegated design and installation of new power lighting, panelboards, and feeder lines. All work must comply with the 2010 ADA Standards for Accessible Design and Building and relevant NFPA and OSHA standards. The performance period is scheduled from June 1, 2027, through September 30, 2027. Sealed bid proposals are due by 2:00 p.m. on November 12, 2026, and must include a 5% bid bond and a completed Schedule of Values to be considered responsive. Bidders must be registered vendors in good standing with the New Hampshire Secretary of State. The contract includes a 10% retainage on completed work, with payments issued within 30 days of an accurate application. Performance and payment bonds are required for awards exceeding 75,000 dollars.
Commercial and Institutional Building Construction

POSTED

14 days ago

DEADLINE

in 15 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS