Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

BEND, TUBE, RETURN

Active
SPE7M3-26-T-7800Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of a single unit of a DEFUELING TUBE ASSEMBLY with NSN 4730-01-343-7351, designated by drawing number 5547825 and intended for use with the MK 60 fueling/defueling stand. The supply is subject to strict technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, and compliance with configuration change management procedures via Engineering Change Proposals or formal variance requests is mandatory. The item contains technical data governed by export control regulations under either ITAR or EAR, restricting its access and transmission to authorized entities only; contractors must hold US/Canada Joint Certification Program certification, complete mandatory DOD export control training, and pass the DLA export-controlled data questionnaire to gain access. Delivery is required within 20 days of award, with performance to occur at Keyport, WA, 98345-7610. The procurement falls under NAICS code 332996 and is managed by the Department of Defense’s Fluid Handling Division, with William Cain as the primary point of contact. The solicitation, issued under number SPE7M3-26-T-7800, was posted on August 2, 2026, with responses due by August 13, 2026, and the contractor must be certified as a CMMC Level 2 Cybersecurity Maturity Model Certification Third-Party Assessment Organization to be eligible.

General Info

Procure one DEFUELING TUBE ASSEMBLY for MK 60 stand, delivery in 20 days, CMMC Level 2 and export control compliance required.

Agency

Department Of Defense → FLUID HANDLING DIVISIONView Agency

NAICS

332996 - Fabricated Pipe and Pipe Fitting ManufacturingView NAICS

Place of Performance

610 DOWELL STREET, KEYPORT, WA, 98345-7610, US

Set-Aside

NONE

Documents

(1)

SPE7M3-26-T-7800.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → FLUID HANDLING DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → FLUID HANDLING DIVISION
View Agency Profile
Office AddressUS
Contacts
William Cain
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
BEND,TUBE,RETURN
“
DEFUELING TUBE ASSEMBLY.
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) THE NSN POINTS TO THE DRAWING NUMBER 5547825 “DEFUELING TUBE ASSEMBLY” AND THE MK 60, FUELING / DEFUELING STAND. SEE DRAWING AND PARTS LIST.
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD002, COVERED DEFENSE INFORMATION APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 4730-01-343-7351 Quantity: 1 EA Purchase Request: 7017690094QTY: 1 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332996
New
DIBBS
STRAINER ELEMENT, SE
Solicitation # SPE7M0-26-T-025J
The contract is for one strain element, sediment, identified by NSN 4730-01-354-5454 and part number 10-0-013-01, supplied by SEA CONTAINERS AMERICA INC under solicitation SPE7M0-26-T-025J. Delivery is required within five days of contract award, FOB origin, with no variance allowed in quantity—exactly one unit must be furnished. Inspection and acceptance occur at the destination, and all packaging must adhere to ASTM D3951 unless superseded by stricter requirements from the DLA Master List of Technical and Quality Requirements, which take precedence. Packaging must be marked and labeled per MIL-STD-129 with the specified Unit of Issue and Quantity per Unit Pack. The item must be shipped via traceable means, excluding parcel post, to the designated freight address in Mineral Wells, Texas. The shipment must be identified with the RDD code and marked for W90HUP, with the supplier’s contact information and project code TP1 also included. The original required delivery date is July 30, 2026, and all federal procurement regulations governing DLA acquisitions apply, including the use of authorized unit of issue and compliance with government-specific labeling procedures.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332996
New
DIBBS
CONTRACTOR FIRST ARTIC
Solicitation # SPE7L4-26-T-5951
The contract specifies the procurement of 12 units of an air dryer and cooler system for pipeline applications under NSN 0001S00000053, with a delivery deadline 279 days after contract award. All components must conform to source-controlled drawings and originate from approved sources listed on those drawings. The product must comply with stringent technical and quality requirements outlined in the DLA Master List, including tailored higher-level quality standards, configuration change management procedures, and qualified manufacturers or products lists where applicable. Ozone-depleting chemicals are strictly prohibited, and any substitute chemicals require prior approval. Inspection and acceptance must occur at the manufacturer’s origin, and government identification must be removed from non-accepted items. Sampling and verification follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, with attributes classified as critical, major, or minor assigned specific verification levels or AQLs. Fat testing is required per two specified drawings, with two samples to be tested and 20 days’ notice provided to the government before testing begins. The contract mandates compliance with DLA packaging standards, measuring and test equipment requirements, and enforcement of quality assurance provisions. The purchasing agency is the Department of Defense under LSO Combat Vehicles and Armament, with performance to be delivered to Tracy, CA, 95304-5000. The solicitation, issued under SPE7L4-26-T-5951, closed for responses on August 13, 2026, with the contractor required to meet all technical, quality, and administrative conditions outlined in the document without deviation unless formally approved. The primary point of contact is Anna-Rachelle Betts at DLA, with all correspondence and inquiries directed through the provided email and phone number.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332996
New
DIBBS
PLUG, WATER INLET FI
Solicitation # SPE7M3-26-T-7801
The contract pertains to the procurement of eight units of a water inlet fitting, identified by NSN 4730-00-928-6499, under solicitation SPE7M3-26-T-7801, with a response deadline of August 13, 2026. Delivery is required within 307 days of award. The item is subject to stringent export control regulations under either ITAR or EAR, prohibiting any unauthorized disclosure or transfer of associated technical data to foreign persons, regardless of location, and mandating compliance with DFARS 252.225-7048. Only DLA contractors possessing valid US/Canada Joint Certification Program certification, who have completed mandatory training on handling export-controlled technical data and submitted the required DLA questionnaire, are authorized to access this information. The contract is administered by the Department of Defense’s Fluid Handling Division, with performance designated for Tracy, California, 95304-5000. The primary point of contact is William Cain, reachable via email and phone provided. The solicitation is classified under NAICS code 332996 and requires compliance with DLA packaging standards and CMMC Level 2 certification for third-party assessors.
FLUID HANDLING DIVISION

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332996
New
DIBBS
COUPLING HALF, QUICK
Solicitation # SPE7M1-26-T-246C
Offerors must comply with strict domestic sourcing requirements under the Berry Amendment and Buy American Act, with thresholds lowered to $150,000, mandating full disclosure of any non-domestic materials in their quotes. The solicitation prohibits the use of covered telecommunications equipment or services as defined by FAR 52.204-24 and DFARS 252.204-7016, and explicitly bars additive manufactured parts unless prior approval is obtained from the contracting officer. Small business joint ventures must submit required representations for eligibility under specific socio-economic categories. Quoters are strongly encouraged to provide quantity ranges rather than fixed numbers due to the fluctuating nature of purchase requests, allowing the government to consolidate or adjust requirements without re-solicitation, unless the request is auto-processed via Auto IDC. All vendors must register through the new Account Management & Provisioning System to access the Vendor Shipment Module for future deliveries, and those using VSM WebServices must update their internal schema by the specified deadline to maintain shipping capabilities. Offers submitted after the closing date must include a “No Bid” submission on DIBBS with an anticipated quote date or explanation to avoid assumptions of non-responsiveness. The contract involves 15 units of a coupling half quick with a 67-day delivery window, under solicitation SPE7M1-26-T-246C, and Fast Pay is not applicable. Vendors must confirm current dealer or distributor certification and explicitly represent compliance with all applicable clauses, including foreign material disclosures, and are advised to consult APEX Accelerators for free assistance with government contracting.
MARITIME SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332996
New
DIBBS
RESTRICTOR UNIT, FLU
Solicitation # SPE7M3-26-T-7806
The contract is for one unit of a restrictor device for fluid flow with NSN 4730-01-485-7318, procured under solicitation SPE7M3-26-T-7806, which is a total small business set-aside under NAICS code 332996. The item must be delivered within 20 days after delivery order issuance, and responses are due by August 13, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date depending on acquisition size. The item includes technical data subject to export controls under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons regardless of location and requiring compliance with DFARS 252.225-7048. Access to this data is restricted to contractors with approved US/Canada Joint Certification Program certification, completed DOD export-controlled data training, and approval from DLA. Cybersecurity compliance mandates CMMC Level 2 certification through a certified third-party assessment organization, and covered defense information handling protocols apply. The point of contact is William Cain, reachable via email and phone, with performance occurring in Mechanicsburg, Pennsylvania.
FLUID HANDLING DIVISION

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332996
New
DIBBS
STRAINER BODY, SEDIMENT
Solicitation # SPE7M3-26-T-7797
The contract is for the procurement of five Strainer Body, Sediment units with NSN 4730-01-460-5044 under solicitation SPE7M3-26-T-7797, issued by the Department of Defense’s Fluid Handling Division. Delivery is required within 158 days to the DLA Distribution DDSP New Cumberland Facility in New Cumberland, Pennsylvania, with FOB Origin terms and no tolerance for quantity variance. All items must comply with MIL-STD-2073-1E packaging standards and MIL-STD-129 marking requirements, and must be palletized according to DLA packaging guidelines. The items are designated as a critical application item, and must be free from intentional addition of mercury or mercury compounds except for specific exempted uses such as batteries, fluorescent lights, sensors, controls, weapon systems, or NAVSEA-specified reagents, with portable mercury-containing devices requiring shockproof design and secondary containment per NAVSEA 5100-003D. Class I ozone-depleting chemicals are strictly prohibited, and any substitute materials must be approved unless explicitly authorized. The contract incorporates technical and quality requirements from the DLA Master List, with revision controls tied to solicitation or award dates depending on acquisition size. The unit of issue is each, and shipping and delivery instructions follow DLA procedures C19 and C20. The required delivery date is January 22, 2027, with a need ship date of January 19, 2027, and the point of contact is William Cain at the Defense Logistics Agency.
FLUID HANDLING DIVISION

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332996
New
DIBBS
PLU G, TUBE FITTING, T
Solicitation # SPE7M3-26-T-7802
The contract is for the procurement of 109 units of a PLU G, TUBE FITTING, T with NSN 4730-00-287-0120, issued under solicitation SPE7M3-26-T-7802 by the Department of Defense’s Fluid Handling Division. Delivery is required within 157 days from the award date, with a required delivery date of February 6, 2027, and the items must be shipped FOB origin. The quantity is strictly fixed with no variance allowed, and inspection and acceptance occur at the destination. Packaging must comply with ASTM D3951 and be marked and labeled according to MIL-STD-129, with palletization following DLA’s RP001 packaging requirements. The unit of issue is each, and the unit price is $109.00, resulting in a total contract value of $11,881. The delivery destination is the DLA Distribution Depot Oklahoma at Tinker AFB, and transportation logistics are governed by DLA procedural notes C19 and C20. The solicitation was posted on August 2, 2026, with a response deadline of August 13, 2026, and the primary point of contact is William Cain, reachable via phone and email provided.
FLUID HANDLING DIVISION

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332996
New
DIBBS
FITTING ASSEMBLY, AI
Solicitation # SPE7L5-26-T-4734
The contract is for a fitting assembly designed for an air flow sensor, identified by NSN 4730-01-297-8354, with a quantity of 35 units required under purchase request 7013880302. The item is subject to strict export control regulations due to the presence of technical data governed by either the International Traffic in Arms Regulations or the Export Administration Regulations, making unauthorized disclosure to foreign persons—regardless of location—a violation. Access to this controlled data is restricted to DLA contractors who hold valid US/Canada Joint Certification Program certification, have completed mandatory training on handling DOD export-controlled technical data, and have been formally approved by DLA authority. The Defense Logistics Agency enforces these restrictions under DFARS 252.225-7048 to ensure compliance with national security requirements. Delivery is mandated within 93 days after order issuance, with performance located at Cherry Point, North Carolina, 28533-5040. The solicitation, issued under number SPE7L5-26-T-4734, was posted on August 2, 2026, with responses due by August 13, 2026, and falls under NAICS code 332996 for other miscellaneous fabricated metal product manufacturing. The contracting entity is the Department of Defense via the Land Supplier Operations Engines organization, with Paul Doerfler listed as the primary point of contact for inquiries, reachable via email and phone provided. The solicitation is classified as a federal procurement with no set-aside designation, and all interested parties must navigate the DIBBS portal to access full documentation and submit proposals. Compliance with packaging requirements as defined by DLA and strict adherence to export control protocols are mandatory conditions for participation and contract award.
LAND SUPPLIER OPNS ENGINES

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332996
New
DIBBS
TEE, TUBE TO BOSS
Solicitation # SPE7M0-26-T-025C
The contract pertains to the procurement of a TEE, TUBE TO BOSS with NSN 4730011555059 and part number 6M6853 manufactured by CATERPILLAR INC, classified as a critical application item with Class 3 threads. A total quantity of eight units is required at a unit price of $8.00, with a total contract value of $64.00, delivered FOB origin within 60 days. The item must be packaged in compliance with ASTM D3951, but all DLA Master List of Technical and Quality Requirements take precedence, and all packaging must be marked and labeled per MIL-STD-129. The unit of issue is each, with no variance allowed in quantity. Inspection and acceptance occur at the destination, and the item must be palletized according to DLA packaging requirements. The delivery destination is DLA Distribution Red River, Receiving Building 499, Texarkana TX 75507-5000, and transportation guidelines are governed by DLAD Proc Notes C19 and C20. The contract is issued under solicitation SPE7M0-26-T-025C with a response deadline of August 13, 2026, and is categorized under NAICS code 332996 by the Department of Defense.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332996
New
DIBBS
CLAMP, HOSE
Solicitation # SPE7M1-26-T-246A
MARITIME SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332996
New
DIBBS
PLUG, PIPE, MAGNETIC
Solicitation # SPE7LX-26-U-9122
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 2 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332996
New
DIBBS
PLUG, ACTUATOR
Solicitation # SPE7L5-26-T-4735
LAND SUPPLIER OPNS ENGINES

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details

More opportunities from Department Of Defense → FLUID HANDLING DIVISION

Same awarding agency

NAICS: 335312
New
DIBBS
STARTER, MOTOR
Solicitation # SPE7M4-26-T-296S
This contract specifies the procurement of a starter motor identified by NSN 6110017187462 and part number S801V50N3S from Eaton Corporation, with a quantity of three units to be delivered FOB origin within 126 days, with no tolerance for variance in quantity. The item is designated as a critical application item, and strict compliance with DLA’s Master List of Technical and Quality Requirements is required, which overrides all other specifications including ASTM D3951 for packaging. Packaging must adhere to MIL-STD-129 for marking and labeling, and palletization must follow DLA’s RP001 packaging requirements. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute chemicals must be approved unless explicitly authorized by the specification. Delivery is to be made to the designated receiving warehouse in Tracy, California, with inspection and acceptance occurring at the destination. The contract enforces DLA’s authorized unit of issue and references official DLA guidance for unit conversion. All technical and quality standards referenced take precedence over general standards, and the requirement for government identification removal from non-accepted supplies is in effect. The solicitation number is SPE7M4-26-T-296S, with a response deadline of August 13, 2026, and the item falls under NAICS code 335312 for motor vehicle electrical and electronic equipment manufacturing.
Motor and Generator Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333613
New
DIBBS
ACCUMULATOR, HYDRAUL
Solicitation # SPE7M4-26-T-296W
The contract is for the procurement of five hydraulic accumulators, part number 608712 and NSN 3040-00-957-3601, supplied by EATON AEROSPACE, LLC, with a total value of $25.00 at $5.00 per unit. The item is classified as a critical application item and must be delivered in strict compliance with DLA packaging requirements, specifically ASTM D3951, though all DLA Master List of Technical and Quality Requirements take precedence over this standard. Packaging and labeling must adhere to MIL-STD-129, and palletization must follow RP001 guidelines. The unit of issue is each, with no variance allowed in quantity—exactly five units must be delivered. Delivery is FOB origin with inspection and acceptance occurring at the destination, and delivery is required within 158 days of the contract award, with an original required delivery date of May 28, 2027, and a need ship date of January 19, 2027. The items must be shipped to the DLA Distribution Depot Hill at Hill AFB, Utah, with transportation handled according to DLAD Proc Note C19 for main shipment and C20 for first destination. Government identification must be removed from non-accepted supplies, and the solicitation number is SPE7M4-26-T-296W, issued under NAICS code 333613 by the Department of Defense’s Fluid Handling Division.
Mechanical Power Transmission Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326122
New
DIBBS
REDUCER, BEAD
Solicitation # SPE7M3-26-T-7805
This contract is for the procurement of one unit of a REDUCER, BEAD with NSN 4730-01-664-8190 under solicitation SPE7M3-26-T-7805, issued by the Department of Defense’s Fluid Handling Division. The item must be delivered within 348 days to the DLA Distribution facility in New Cumberland, Pennsylvania, FOB origin, with no tolerance for quantity variance. Inspection and acceptance occur at the destination, and packaging must comply with ASTM D3951 while strictly adhering to DLA’s Master List of Technical and Quality Requirements, which override any conflicting standards. All packaging and labeling must follow MIL-STD-129, and palletization must meet DLA’s specific packaging guidelines. The product must be free of mercury and mercury-containing compounds except for approved functional uses in batteries, fluorescent lights, sensors, weapon systems, or specified chemical reagents, with portable mercury-containing devices requiring shock-proof design and secondary containment per NAVSEA 5100-003D. Class I ozone-depleting chemicals are entirely prohibited, and any substitutions require prior approval. The unit of issue is each (EA), and the contractual price is set at $1.00 per unit. The required delivery date is July 28, 2027, with the original response deadline for the solicitation having passed on August 13, 2026. Technical and quality requirements referenced are governed by the DLA Master List version in effect at the time of solicitation issuance.
Plastics Pipe and Pipe Fitting Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332999
New
DIBBS
HOSE ASSEMBLY, NONMETAL
Solicitation # SPE7M4-26-T-297T
This contract specifies the procurement of a nonmetallic hose assembly with NSN 4720-01-494-5683 and part number 7-554-202801, issued by the Department of Defense through the Fluid Handling Division. Four units are required at a unit price of $4.00, totaling $16.00, with delivery due within 130 days to DLA Distribution Barstow, California, under FOB origin terms. The order carries a strict zero percent quantity variance, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E and DLA’s packaging requirements, including specific methods for preservation, wrapping, containerization, and marking in accordance with MIL-STD-129, with no special marking required. All technical and quality standards referenced are governed by the DLA Master List of Technical and Quality Requirements, with the revision effective on the solicitation issue date controlling. The contract is linked to solicitation SPE7M4-26-T-297T, which was posted on August 2, 2026, with responses due by August 13, 2026, and the NAICS code is 332999. The primary point of contact is Blake Tushar, reachable via phone and email. Transportation and shipping instructions follow DLAD procedural notes C19 and C20.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326220
New
DIBBS
SLEEVE, REINFORCING,
Solicitation # SPE7M4-26-T-297N
This contract specifies the procurement of a reinforcing sleeve for hose applications under military specification, with strict adherence to technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements. The item is designated as a critical application requiring engineering source approval and is restricted to approved suppliers including Boeing, Eaton Aeroquip, Smiths Tubular Systems, and Parker Hannifin, all supplying the same part number BACH8A04EE0130B. Compliance with MIL-STD-130N for Item Unique Identification and DFARS 252.211-7003 is mandatory, alongside traceability documentation per DLA Procurement Note C03 (August 2016). The product must not contain any Class I ozone-depleting chemicals, and all packaging, preservation, and marking must conform to MIL-STD-2073-1E, MIL-STD-129, and DLA packaging standards. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and attributes are assigned verification levels based on criticality. Delivery is FOB origin, with a strict quantity of eight units, no variance allowed, arriving at the DLA distribution facility in New Cumberland, PA within 25 days of order, with a required ship date of September 8, 2026. All data and documentation must remain under government control, and the item is subject to covered defense information protocols under RD002.
Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332999
New
DIBBS
HOSE ASSEMBLY, NONMETAL
Solicitation # SPE7M4-26-T-297A
The contract pertains to the procurement of four nonmetallic hose assemblies with part numbers F722J9J7121212-84 and F722TCJ9J1121212-84-000, supplied by Parker-Hannifin Corporation under NSN 4720-01-480-6648. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, with compliance determined by the revision in effect on the solicitation or award date depending on acquisition size. Item Unique Identification is not required per the Service customer’s request, and DFARS 252.211-7003(c)(1)(i) applies. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, and unspecified attributes are treated as major. Verification levels and AQLs are defined for critical, major, and minor attributes, with the manufacturer permitted to choose attribute or variable inspection under MIL-STD-1916 unless restricted. Packaging must comply with ASTM D3951 and MIL-STD-129, with all labeling and marking adhering to DLA standards, and palletization according to RP001 requirements. The DLA Master List takes precedence over ASTM D3951. Delivery is FOB origin with a 137-day lead time, and inspection and acceptance occur at destination. The unit of issue is each, with a fixed quantity of four units and no variance permitted. The delivery address is DLA Distribution Albany in Albany, Georgia, with a required ship date of December 29, 2026. The solicitation, issued under SPE7M4-26-T-297A, was posted on August 2, 2026, with responses due by August 13, 2026, and is managed by the Department of Defense’s Fluid Handling Division, with Blake Tushar as the primary point of contact.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326220
New
DIBBS
HOSE ASSEMBLY, NONME
Solicitation # SPE7M4-26-T-297P
This contract specifies the procurement of a nonmetallic hose assembly with part number 591200-51 and NSN 4720016541086, quantity of three units, to be delivered FOB origin within 39 days of contract award, with a required delivery date of May 2, 2026 and a need ship date of September 22, 2026. The item is classified as a critical application item with no shelf life requirement and must comply with extensive technical and quality standards referenced through DLA master lists, including preservation, packaging, and marking requirements per MIL-STD-2073-1E and MIL-STD-129. All units must be marked with the NSN, contract number, lot number, contractor and manufacturer CAGE codes, and part number, with special marking codes not applicable. Packaging must adhere to DLA packaging requirements and palletization standards, with each unit contained in a D3 unit package within an E5 intermediate container. The contract mandates compliance with stringent traceability and identification protocols, including retention of supply chain documentation per DLA Procurement Note C03, Item Unique Identification (IUID) following MIL-STD-130 and DFARS 252.211-7003, and FAA bare item marking requirements. Sampling and inspection are governed by MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are to be classified with verification levels or AQLs as dictated by applicable documents. Acceptance occurs at the destination, with no variance allowed in quantity. Shipping and delivery instructions direct all units to the DLA Distribution facility in New Cumberland, PA, and transportation logistics are governed by DLA Procurement Notes C19 and C20. The solicitation, issued under contract number SPE7M4-26-T-297P, is for a federal acquisition under NAICS code 326220 with Blake Tushar as the point of contact.
Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336411
New
DIBBS
BODY, VALVE
Solicitation # SPE7M4-26-T-297W
The contract pertains to the procurement of a BODY, VALVE with a matched set SEAL RING, identified by NSN 4820-00-404-6625, for a quantity of five units under purchase request 7017695673. Delivery is required within 165 days from award, and the solicitation number is SPE7M4-26-T-297W, issued by the Department of Defense’s Fluid Handling Division. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective as of either the solicitation issue date or award date depending on the scale of the acquisition. Subcontractors must comply with DLA packaging requirements and are required to remove government identification from non-accepted supplies. No bidset is available from DLA, and the alternate offeror must submit a complete data package including specifications for both the approved and alternate parts. The prime contractor is Eaton Aerospace LLC dba Sterer Engineering, and the place of performance is New Cumberland, Pennsylvania, with Rory O’Reilly listed as the primary point of contact. The NAICS code is 336411, and the solicitation closes on August 13, 2026.
Aircraft Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 114119
New
DIBBS
CABINET, KEY
Solicitation # SPE7M4-26-T-296X
The contract pertains to the procurement of a cabinet key under NSN 2090-00-904-6699, with a quantity of 63 units, to be delivered FOB origin within 123 days by December 15, 2026. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersedes any conflicting standards such as ASTM D3951. Packaging must comply with MIL-STD-129 for marking and labeling, and palletization must adhere to DLA’s RP001 packaging requirements. The hinge must be provided with a fast-type pin, and piece number 22, the bulkhead clip, must be supplied in specified dimensions of 1 inch long by 3/4 inch wide by 1/8 inch thick, with part number HPC-511. The unit of issue is each (EA), with no variance allowed in quantity. Inspection and acceptance occur at the destination, and delivery must be made to the designated receiving warehouse in Tracy, California. Transportation procedures must follow DLAD Proc Notes C19 and C20. The solicitation number is SPE7M4-26-T-296X, issued by the Department of Defense’s Fluid Handling Division, with primary point of contact Rory O’Reilly.
Other Marine Fishing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332919
New
DIBBS
PLUG, PIPE
Solicitation # SPE7M3-26-T-7794
The contract specifies the procurement of one plug and pipe assembly with NSN 4730-01-549-7774 under solicitation SPE7M3-26-T-7794, requiring delivery within 20 days FOB origin with no variance in quantity. The item must be packaged in compliance with ASTM D3951, but all DLA Master List of Technical and Quality Requirements take precedence over this standard. Packaging and labeling must adhere to MIL-STD-129, and palletization must follow DLA’s RP001 packaging guidelines. The shipment must be sent via traceable freight methods, explicitly prohibiting parcel post, and directed to the designated military delivery address at Moody AFB, Georgia. The unit of issue is each, priced at $1.00, with inspection and acceptance occurring at the destination. The supplier is identified as GENERAC MOBILE PRODUCTS, LLC, and the required delivery date is July 29, 2026, with solicitation responses due by August 13, 2026. Government use identifiers and codes are included for internal logistics and tracking purposes.
Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334519
New
DIBBS
GAGE ROD-CAP, LIQUID
Solicitation # SPE7M4-26-T-297Y
The contract pertains to the procurement of 55 units of a GAGE ROD-CAP, LIQUID LEVEL with NSN 6680-01-299-3387 under solicitation SPE7M4-26-T-297Y, with a delivery requirement of 95 days after contract award. The item is designated as a source control item and is subject to stringent technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, which must be complied with in full. Sampling procedures must follow MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based sampling plan, with attributes classified as critical, major, or minor assigned verification levels VII, IV, and II respectively or AQLs of 0.1, 1.0, and 4.0; unspecified attributes are treated as major. Zero non-conformances are required in the sample lot unless otherwise directed in the contract. The item is classified under NAICS 334519 and is governed by cybersecurity requirements mandating CMMC Level 2 certification for the third-party assessment organization involved. Export control regulations under ITAR or EAR apply to associated technical data, restricting disclosure to foreign persons anywhere, including U.S. subsidiaries and employees, and require compliance with DFARS 252.225-7048. Access to this data is limited to approved DLA contractors with JCP certification, completion of mandatory training on handling export-controlled technical data, and approval from the DLA controlling authority. Packaging must adhere to DLA packaging requirements, and government identification must be removed from non-accepted supplies. The solicitation was posted on August 2, 2026, with a response deadline of August 13, 2026, and performance is to occur in Corpus Christi, Texas.
Other Measuring and Controlling Device Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details