This Solicitation opportunity from California was posted on May 7, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Big Bus Parts - Misc

Closed

250376State & Local

Submission Closed05/11/2026, 07:00:00 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 423860

New

Federal

Pre-Solicitation Notice for NSN 5120-00-169-0215

Solicitation # 47QSSC-27-R-0003

Supply Chain Management Contracting Division Gsa/fas/gss/qscb

POSTED

DEADLINE

Truck & Trailer Tie Down Equipment

Solicitation # B2728305

Solicitation B2728305 is a fixed-price procurement for Truck and Trailer Tie Down Equipment issued by the City of Philadelphia's Parks and Recreation department. The contract will be awarded to the lowest, responsible, and responsive seller who meets all technical and administrative requirements. The aggregate value of purchase orders issued under this contract shall be less than 45,000 dollars. All products must be delivered FOB Destination Point, and sellers are required to provide the exact items specified unless an acceptable alternate of equal quality and performance is approved by the City. Submission of quotes must be completed electronically via the PHLContracts portal by the December 10, 2026, deadline. A mandatory Consent and Authorization Agreement must be on file for a quote to be considered, while an LGBTQ Applicant Opportunity Data Form may be submitted optionally. Awarded vendors must enroll in the city's electronic deposit system for payment and maintain specific insurance coverages, including 500,000 dollars in general liability and 300,000 dollars in automobile liability, unless providing equipment solely via common carrier. The contract is governed by the laws of the Commonwealth of Pennsylvania and the courts of Philadelphia County.

POSTED

DEADLINE

NRP,SON LNCH DIST V — 1680016443714 — SPRPA127QWA20

Solicitation # SPRPA127QWA20

Solicitation SPRPA127QWA20 is an emergency acquisition issued by the Department of the Navy via the DLA Aviation office in Philadelphia for the procurement of NSN 7RH 1680-01-644-3714 CB, described as NRP, SON LNH DIST V. The requirement specifies a delivery timeline of 90 days with shipping terms set as FOB Destination. Inspection and acceptance will occur at the origin. The government intends to make a single award to a technically acceptable offeror, with the evaluation prioritizing past performance over price. Risk assessments may be conducted using the DoD Supplier Performance Risk System to evaluate item, price, and supplier risks. The contract mandates strict adherence to military packaging and marking standards, including MIL-STD-2073-1 for system stock and MIL-STD-129 for labeling. Specific requirements are outlined for electrostatic discharge protection per ANSI/ESD S20.20-2021 and shelf-life markings, requiring at least 85 percent of the Navy shelf-life to remain upon receipt. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment requests. Compliance with the Buy American Act and safeguarding covered defense information under DFARS 252.204-7012 is required. Offerors must provide current catalogs or price lists and validate their status in the System for Award Management.

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

PROPELLER SHAFT, NONVEH

Solicitation # SPE7L0-27-Q-0028

Solicitation SPE7L0-27-Q-0028 is a request for the procurement of eight nonvehicular propeller shafts, identified by NSN 3040-01-625-0751 and Yamaha Motor Corporation P/N 6CB-45611-00-00. Issued by the DLA Weapons Support Land Supply Chain, the requirement specifies a delivery date of February 6, 2026, with a delivery window of 60 days after order. The items are to be shipped FOB Destination to the Royal Jordanian Engineering Corps in Zarqa, Jordan, with Serra International Inc serving as the freight forwarder. Inspection and acceptance will occur at the point of origin. The contract mandates strict adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, with palletization following DLA requirement RP001. Payment must be processed electronically via the Wide Area WorkFlow system. This is not a small business set-aside and includes various federal and defense regulations, including Buy American preferences, cybersecurity compliance under DFARS 252.204-7012, and prohibitions regarding Chinese military companies. Offerors must submit quotations using Standard Form 18 by the specified deadline, with the government evaluating the potential use of reconditioned or surplus property.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Marine Safety Gear and Equipment - RFI

Solicitation # 04326 - RFI #2

The Washington Department of Enterprise Services is requesting feedback through RFI #2 regarding the development of Marine Safety Gear and Equipment. This solicitation seeks industry input on safety gear requirements, current market availability, distribution methods, and overall coverage to inform the agency's planning and procurement strategies. Interested parties must submit their responses by November 1, 2026. The scope of performance covers multiple counties within the state of Washington. Primary inquiries and submissions should be directed to David Hallock at the Department of Enterprise Services.

Enterprise Services , Department. of

POSTED

DEADLINE

RFQ-171-270000000015-2 | 472/23129.KMM; Woodland C.F. - Site Mechanical Underground

Solicitation # 472/23129

Solicitation 472/23129, managed by the Michigan Department of Technology, Management and Budget (DTMB), is for site mechanical underground construction at the Woodland Correctional Facility in Whitmore Lake, Michigan. The scope of work involves updates to the sanitary sewer and water main systems, requiring the contractor to manage project permits from agencies such as DLARA, MDOT, and EGLE, as well as handle utility location, hydro excavation, and dewatering. Bids are due by November 18, 2026, and require submission via the SIGMA VSS portal, including proof of State Project Registration. Due to the secure nature of the Michigan Department of Corrections facility, personnel must complete a LEIN background check request for perimeter access. The project is governed by MICHSPEC Division 0 Specifications and includes specific requirements for project restoration and the testing of existing water main piping. A construction bid addendum has introduced a material allowance to the bid schedule and clarified standards for MDOC utility and security shutdowns, as well as the handling of owner-furnished sanitary lift station equipment. Technical execution is supported by a geotechnical data report providing soil boring data and engineering recommendations for the installation of 6.0 and 8.0-inch watermains, including guidelines for trenchless crossings.

POSTED

DEADLINE

FUEL INJECTOR KIT 8000 HR SIEMENS CHARGER LOCOMOTIVE

Solicitation # 2139511

Solicitation 2139511 is a rate order issued by the MTA Metro-North Railroad for the procurement of a Fuel Injector Kit 8000 HR Siemens Charger Locomotive. This procurement falls under the category of transportation commodities and is intended for performance state-wide within New York. The solicitation was posted on October 15, 2026, with a response deadline of November 5, 2026, at 3:00 PM. The primary point of contact for this requirement is TAA Harrypaul, a Procurement Specialist II. Interested parties can find additional details and contact information via the MTA Vendor Portal. There are currently no specific goals established for Service-Disabled Veteran-Owned Businesses, Minority/Women Business Enterprises, or Disadvantaged Business Enterprises, as all such goals are set at 0.00 percent.

MTA - Metro-north Railroad

POSTED

DEADLINE

Locomotive Overhaul Kit

Solicitation # 195772A

Metra is soliciting bids under solicitation number 195772A for the procurement of Locomotive Overhaul Kits to support the in-house rehabilitation and modernization of F40PH-3 locomotives. This indefinite quantity contract is established for a five year period with a total value not to exceed 19 million dollars. The award will be granted to the lowest responsive and responsible bidder based on gross individual unit prices or the gross bid total. Key requirements for responsiveness include bidding on all items, providing a signed contract signature page, acknowledging all addenda, and submitting a correctly executed Buy America Certificate for FTA funded procurements exceeding 150,000 dollars. The scope includes the provision of materials and overhaul kits delivered F.O.B. Destination within the Chicagoland Six County Area, specifically to the 47th Street Maintenance Facility. Pricing must be all inclusive of packaging, transport, handling, and remanufactured costs. The contract mandates a one year warranty period and requires compliance with various federal and state regulations, including 49 CFR Part 26 for Disadvantaged Business Enterprises, the Americans with Disabilities Act, and FTA Circular 4220.1G. Bidders must provide notarized non collusion affidavits and certifications regarding debarment and suspension. The successful contractor is responsible for performing all inspection and acceptance testing of items prior to delivery.

POSTED

DEADLINE

Multiple Victoria-Class Spares - Anti- Flash Device, Cooler,Fluid,Industrial, Cartridge,Check Valve, Parts Kit, Fluid Pressure Filter, Valve, Safety Relief

Solicitation # W8482-275589/A

The Department of National Defence is soliciting proposals under solicitation number W8482-275589/A for the procurement of various Victoria-Class spares. The required items include anti-flash devices, industrial fluid coolers, check valve cartridges, fluid pressure filter parts kits, and safety relief valves. These components are to be delivered in equal quantities to CFB Esquimalt and CFB Halifax. All goods must be new and delivered Free Carrier (FCA) per Incoterms 2020. Bids are due by November 9, 2026, at 14:00 EST, with the Department of National Defence reserving the right to negotiate delivery dates around March 31, 2027. The contract mandates strict quality and packaging standards, including specific marking requirements for manufacturer names and part numbers, and the use of PDF417 bar code symbols for unique identification. Certain items require permanent stamping or etching and must adhere to specific shelf-life requirements, ensuring at least 75 percent of the authorized shelf life remains upon delivery. Bidders proposing equivalent or substitute products must provide comprehensive technical specifications and compliance statements to prove full interchangeability. Payment for undisputed invoices will be issued within 30 days of receipt.

Department of National Defence

POSTED

DEADLINE

Aviation Maintenance Parts IDIQThe Department of State, through the Bureau of International Narcotics and Law Enforcement Affairs, is establishing an Indefinite Delivery, Indefinite Quantity contract for aviation maintenance parts. This initiative is designed to create a more efficient and cost-effective sourcing mechanism for the procurement of aviation parts and related services, with the primary place of performance located in Bogota. Classified under NAICS code 423860, this forecast was posted on September 1, 2026. Jamillah Timmons serves as the primary point of contact, with Tyler Sinclair acting as the Small Business Specialist for the requirement.

BUREAU OF INTERNATIONAL NARCOTICS AND LAW ENFORCEMENT AFFAIRS

POSTED

DEADLINE

Aviation Maintenance Parts IDIQThe Aviation Maintenance Parts IDIQ is a forecasted contract initiated by the Department of State to establish an Indefinite Delivery, Indefinite Quantity vehicle for aviation parts and services. The primary objective of this procurement is to create a more efficient sourcing mechanism that provides faster and more cost-effective access to essential aviation components. Classified under NAICS code 423860, the contract is designed to streamline the acquisition process for maintenance requirements, ensuring that necessary parts are available to support aviation operations without the delays associated with traditional procurement methods. This forecast was posted on August 20, 2026, and serves as an advance notice for potential industry participants. Interested parties can coordinate with designated points of contact, including Jamillah Timmons and Small Business Specialist Tyler Sinclair, for further inquiries. While specific set-aside details are not currently defined, the initiative represents a strategic effort by the Department of State to optimize its supply chain for aviation maintenance through a flexible and responsive contracting framework.

POSTED

DEADLINE

Marine Lanterns and Aids to Navigation (ATON) SupplyThis subcontract involves the supply of marine lanterns and Aids to Navigation (ATON) equipment for prime contractors serving the Port Authority of Jamaica Harbours Department. The scope of work focuses on providing specialized goods categorized under Marine Supplies and Marine Equipment, specifically designed for harbor use and marine navigation. The contract is managed under the Government of Jamaica and falls under NAICS code 423860. The primary objective is the delivery of completed marine lanterns and ATON equipment to ensure safe navigation within the jurisdiction of the Port Authority of Jamaica.

Port Authority of Jamaica

POSTED

2 months ago

DEADLINE

N/A

AI Contract Overview

Bidders must be the original equipment manufacturer, an authorized dealer, an approved reseller, subcontractor, or agent authorized by the OEM to supply parts under this solicitation for Big Bus Parts – Misc. Each bid must include the manufacturer’s name, complete warranty details with a checked start of warranty checkbox, best price, lead time, and must account for all freight and delivery costs within the quoted amount. The Orange County Transportation Authority will award contracts to the lowest responsive and responsible bidder with available inventory, and awards may be split among multiple bidders based on overall benefit to OCTA. Warranty terms are a critical evaluation factor and may influence the award decision. Brand names and model numbers specified are for identification only; however, failure to state them renders the bid non-responsive. Substitutions require prior approval as an OCTA-approved equal, which demands full technical documentation submitted via the Approved Equal Form, with the bidder bearing all costs and responsibility to prove equivalence, substitutability, and compatibility, subject solely to OCTA’s determination. All bidders must provide both their own warranty and a pass-through warranty from the original manufacturer, and OCTA reserves the right to verify dealer status. Noncompliance with warranty terms results in returned merchandise at the bidder’s expense. Upon award, a purchase order will be emailed, and bidders must confirm receipt within 24 hours. Delivery must meet the guaranteed due date for each line item; failure to comply may lead to order cancellation and re-procurement charges.

General Info

OEM or authorized sellers must quote full warranty, price, lead time, freight; lowest responsive bidder wins; substitutions require approval.

Agency

California → F&A-Contracts Administration and Materials Management

NAICS

423860 - Transportation Equipment and Supplies (except Motor Vehicle) Merchant Wholesalers

Place of Performance

CA, USA

Set-Aside

NONE

Documents

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedMay 7

Solicitation

Response DeadlineMay 11

Deadline has passed

Submission Closed

05/11/2026, 07:00:00 AM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyCalifornia → F&A-Contracts Administration and Materials Management

Contacts1 person available

OfficeOrange, CA, 92863, USA

Organization / AgencyCalifornia → F&A-Contracts Administration and Materials Management

Office AddressOrange, CA, 92863, USA

Contacts

Orlanda HigginbothamBuyer

contact@example.gov

+1 (555) 000-0000

Interested Companies (21)

Vehicle Maintenance ProgramBoca Raton, FL

Kirk's AutomotiveDetroit, MI

Muncie Transit SupplyMUNCIE, IN

See All 21 Interested Companies

Start a free trial to view all interested companies, their contact details, and full contractor profiles.

Start Free Trial

Full Description

SOLICITATION FOR BIG BUS PARTS To provide goods described in this solicitation, bidder must be the original equipment manufacturer, authorized dealer or approved reseller, subcontractor, agent authorized by the OEM. Please provide your best price, warranty terms, and lead time. The Orange County Transportation Authority (OCTA) will award to the lowest responsive, responsible Bidder with available inventory. The award of items identified on this solicitation may be split between Bidders based upon the overall benefit to OCTA. Best warranty terms may influence award results. All freight costs and/or delivery costs are to be included in the Bidder's price. Bidder must state manufacturer's name and complete warranty section including start of warranty checkbox. Brand name and model number, when used, are for the purposes of identifying a standard of requirement. IF NOT STATED, LINE ITEM MAY BE FOUND NON-RESPONSIVE. If bidding a brand other than requested, it must be an OCTA approved equal prior to bidding. An OCTA approved equal may be entered on the bid and identified as such. To obtain approved equal status the item must be pre-approved by going through the approved equal process and providing fully supported technical data attached to an Approved Equal Form. Once OCTA has reviewed and tested the data, and if the part is accepted as an approved equal, Bidder may bid using that item in future solicitations. The burden of proof as to the equality, substitutability, and compatibility of proposed alternates or equals shall be upon the bidder, who shall furnish all necessary information at no cost to OCTA. OCTA shall be the sole judge as to the equality, substitutability, and compatibility of proposed alternates or equals. Bidder shall, in addition to its separate warranties and obligations, provide a pass-through genuine new parts manufacturer and/or supplied parts warranty. Bidder shall be responsible for both separate and pass-through warranties. OCTA has the right to verify authorized dealership or distributorship status. Failure to comply with the stated warranty requirements will result in returned merchandise at the Bidder's expense. When awarded to a vendor an emailed purchase order will follow. The vendor must reply to the Buyer's request, "Please confirm receipt of this order" PER EMAIL for the purchase order within twenty-four hours. Bidder must comply with Guaranteed Delivery due date as specified for each line item awarded. Failure to meet these requirements may result in cancellation of the purchase order and re-procurement charges.