Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

This Pre-Solicitation opportunity from Department Of Defense was posted on July 19, 2016. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Blasting and painting of crane booms and frames

Closed
N68335-16-T-0370Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 811310
New
SLED
Bus Fire Suppression System Maintenance
Solicitation # WMATA-0000010906
The Washington Metropolitan Area Transit Authority is seeking proposals for the maintenance of bus fire suppression systems under solicitation number WMATA-0000010906. This procurement falls under NAICS code 811310 and is managed through the agency's Virginia operations. The solicitation was posted on October 29, 2026, with a response deadline set for November 4, 2026. Interested parties must submit their responses by the specified cutoff date via the official supplier portal.
Washington Metropolitan Area Transit Authority

POSTED

about 1 hour ago

DEADLINE

in 6 days
NAICS: 811310
New
Kubota M8200 Clutch Replacement
Solicitation # kubota-m8200-clutch-replacement
Management and Training Corporation is soliciting lump sum fee proposals for the clutch replacement of a Kubota M8200 tractor with front wheel assist, located at the Earle C. Clements Job Corps Center in Morganfield, Kentucky. The scope of work requires a qualified contractor to provide all transportation, labor, materials, and equipment to diagnose and repair the clutch assembly and power take-off system. Key technical requirements include replacing friction discs, bearings, oil seals, and O-rings, resurfacing the flywheel, and replacing hydraulic pipes and filters as needed. The contractor must perform all work according to manufacturer specifications and provide a final summary of diagnostic findings, an itemized list of replaced parts, and warranty documentation upon completion. This solicitation is set aside for small businesses, including VOSB, SDVOSB, WOSB, and HUBZone certified entities. Bids must be submitted via email to Angie Mahoney by 3:00 PM CST on November 3, 2026, and must include a bid sheet, proof of insurance, a completed supplier packet with a W-9, and applicable SBA certification letters. Award decisions will be based on best value, with a focus on administrative compliance and technical qualifications. The contract is subject to various Federal Acquisition Regulations, including standards for combating trafficking in persons, Buy American restrictions, and Service Contract Labor Standards per Wage Determination 2015-4687 Revision 31 for Kentucky.
Earle C. Clements Job Corps Center

POSTED

about 1 hour ago

DEADLINE

in 5 days
NAICS: 811310
New
International
Fuel Dispenser Technical Installation & Repair
Pakistan State Oil Company Ltd

POSTED

about 6 hours ago

DEADLINE

in 6 days
NAICS: 811310
New
International
RFP RF-32079-AS (Replacement of Damaged Parts of Tatsuno Dispensing Unit at NVRO, BWP Division)
Solicitation # RF-32079-AS
Solicitation RF-32079-AS is issued by the Pakistan State Oil Company Ltd for the replacement of damaged parts of a Tatsuno dispensing unit located at NVRO within the BWP Division. This procurement opportunity was posted on October 29, 2026, with a response deadline set for November 4, 2026, at 09:15. The place of performance for these services is located in Pakistan. The primary point of contact for this solicitation is Arslan Sajjad, who can be reached via email at [email hidden]. While the solicitation is hosted on the Ariba portal, specific details regarding pricing, evaluation factors, and the detailed statement of work were not provided in the available metadata.
Pakistan State Oil Company Ltd

POSTED

about 6 hours ago

DEADLINE

in 6 days
NAICS: 811310
New
SLED
Fisher Recirculation Valve and Actuator DCI and Overhaul
City of Redding

POSTED

about 7 hours ago

DEADLINE

in about 1 month
NAICS: 811310
New
SLED
WEG Industrial Motor DCI and Overhaul
City of Redding

POSTED

about 7 hours ago

DEADLINE

in about 1 month
NAICS: 811310
New
SLED
Sulzer Boiler Feedwater Pump DCI and Overhaul
City of Redding

POSTED

about 7 hours ago

DEADLINE

in about 1 month
NAICS: 811310
New
SLED
Overhaul Of Two (2) Boiler Feedwater Pumps, Motors & Valves
Solicitation # 5740
The City of Redding is soliciting proposals for the off-site shop inspection and overhaul of two Sulzer boiler feedwater pumps, two WEG motors, and two Fisher recirculation valves and their actuators. The scope of work includes the disassemble, clean, inspect, and overhaul (DCI) process, with the contractor managing all shipping, packaging, and handling of equipment to and from their facility. On-site services are limited to technical advisory supervision provided by Technical Field Advisors. A critical requirement is that the overhauled equipment must be returned to the power generation facility in Redding, California, within approximately 21 days of its initial removal and shipping. Award will be based on the best overall value, evaluated through a weighted system that prioritizes total project costs (30 points), contractor qualifications and experience (20 points), project approach and schedule conformance (20 points), understanding of project requirements (15 points), and proposal quality (5 points). The City is not required to award to the lowest cost proposer. Bidders must provide a bid security of 10%, along with payment and performance bonds of 100% and a maintenance bond of 50%. Proposals must be submitted by 3:00 p.m. PT on December 4, 2026, and must include a separate sealed envelope for the project costs and fee schedule. Because the services are off-site and professional in nature, prevailing wages under the California Labor Code are not required.
City of Redding

POSTED

about 7 hours ago

DEADLINE

in about 1 month
NAICS: 811310
New
SLED
Pump Refurbishment (Add-Alternate No. 3)
Nassau Community College

POSTED

about 13 hours ago

DEADLINE

in 22 days
NAICS: 811310
New
WINDOW AY — 1680016170785 — N0038327QAA17
Solicitation # N0038327QAA17
Solicitation N0038327QAA17, issued by Navsup Weapon Systems Support for the Department of the Navy, seeks a contractor for the teardown, evaluation, repair, and modification of two window assemblies, identified by NSN 1680-01-617-0785. The requirement covers an induction period of one year from the date of the order, with a delivery timeframe of 90 days and shipping terms set as FOB Destination. Final inspection and acceptance will be conducted by the Contract Administration Office at the contractor's location. The government intends to make a single award based on the most advantageous offer, prioritizing past performance over price. Evaluation of past performance may include the use of the DoD Supplier Performance Risk System to assign color ratings. The contract mandates strict adherence to military packaging and marking standards, specifically MIL-STD-2073 and MIL-STD-129, with specialized labeling requirements for Depot Level Repairable items. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and compliance with various FAR and DFARS clauses, including the Buy American program and cybersecurity reporting standards.
Navsup Weapon Systems Support

POSTED

about 13 hours ago

DEADLINE

in about 1 month
NAICS: 811310
New
SLED
Annual And Periodic Inspections And Maintenance And Repair Services Of Port Authority Trans-Hudson Corporation (Path) Emergency Diesel And Natural Gas Generators -Three Year Contract
Solicitation # 2140379
The Port Authority of New York and New Jersey is soliciting bids for a three-year contract to provide annual and periodic inspections, maintenance, and repair services for emergency diesel and natural gas generators used by the Port Authority Trans-Hudson Corporation (PATH). This procurement, identified by solicitation number 6000003543 and NIGP code 28539, is focused on stationary generators. A pre-bid meeting will be conducted via Microsoft Teams on November 9, 2026, from 10:00 a.m. to 11:00 a.m. ET to review the requirements and solicitation documents. Bids must be submitted electronically through the Euna portal by the deadline of November 18, 2026. The Port Authority emphasizes a commitment to non-discrimination in accordance with Title VI of the Civil Rights Act of 1964, ensuring full and fair opportunity for all businesses regardless of race, color, national origin, age, or disability. Procurement operations are managed from 150 Greenwich Street, 21st Floor, New York, New York, and interested parties can contact the Procurement Operations Bid/RFP Custodian via email at [email hidden] or by phone at [phone hidden] for assistance.
The Port Authority of New York and New Jersey

POSTED

about 13 hours ago

DEADLINE

in 20 days
NAICS: 811310
New
SLED
Commercial Kitchen Equipment Repair ServicesThis subcontract for Commercial Kitchen Equipment Repair Services involves providing inspection, diagnosis, and repair of kitchen machinery for prime contractors working on Arizona Department of Corrections, Rehabilitation & Reentry facility projects. The selected provider is responsible for troubleshooting equipment according to industry standards and manufacturer specifications, supplying all required tools and diagnostic equipment, and ensuring all machinery is fully operational through a final visual walkthrough. Due to the nature of the work locations, personnel must obtain and maintain necessary security clearances to access secured prison perimeters. This opportunity is categorized under NAICS code 811310, with a response deadline of December 18, 2026.
Arizona Department of Corrections

POSTED

about 18 hours ago

DEADLINE

in about 2 months

General Info

Agency

Department Of Defense → Navair Warfare Ctr Aircraft Division

NAICS

811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

Place of Performance

FRC AVIATION SUPPORT EQUIPMENT PORT NAVAL OPERATIONS BASE NORFOLK HANGAR V-88, NORFOLK, VA, 23511, USA

Set-Aside

SBA

Documents

1

SOW - Aircraft Crash and Salvage Crane Painting Services

PDF, High priority: read this firstsow
High

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseClosed
Posted

Presolicitation

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Navair Warfare Ctr Aircraft Division
Contacts1 person available
OfficeJOINT BASE MDL, NJ, 08733, USA
Organization / AgencyDepartment Of Defense → Navair Warfare Ctr Aircraft Division
Office AddressJOINT BASE MDL, NJ, 08733, USA
Contacts
David J. MoneContract Specialist
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
Description: The Naval Air Warfare Center Aircraft Division Lakehurst, NJ intends to solicite on a competitive basis for the procurement of Service: Sand blasting and painting of two (2) crane booms and frames in accordance with the attached statement of work. All responsible Businesses are encouraged to contact Mr. David Mone, contact@example.gov, Code 2.5.2.5.3, +1 (555) 000-0000 to receive an RFQ. Responses must be received within fifteen (15) days of publication of this notice. Offerors must be registered in the System for Award Management (SAM) Database prior to submission of an offer to be considered for award of any DoD contract. This may be accomplished electronically at: http://www.sam.gov/vendor.cfm The Point of Contact is Mr. David Mone, +1 (555) 000-0000, Email: contact@example.gov.

More opportunities from Department Of Defense → Navair Warfare Ctr Aircraft Division

Same awarding agency

NAICS: 333924
New
Federal
Next Generation Bomb Hoist
Solicitation # N6833526R1012
Solicitation N6833526R1012 is a request for proposals issued by the NAVAIR Warfare Center Aircraft Division for a fixed-price Indefinite Delivery Indefinite Quantity (IDIQ) contract to manufacture and deliver Next Generation Bomb Hoist (NGBH) support equipment. The scope of work includes the production of four Pilot Production Units and an estimated 940 Full Rate Production Units over a five-year period, alongside associated technical data and reports. The procurement is a total small business set-aside, requiring both the prime contractor and all subcontractors to be small businesses without exception. Award will be based on a best-value trade-off process, prioritizing technical capability and past performance over price. Key technical requirements include compliance with the Technical Data Package, welding certifications, and the ability to manufacture a designated Critical Safety Item cable assembly. Additionally, CMMC Level 2 self-certification is a material condition of award. Proposals must be submitted electronically via the Procurement Integrated Enterprise Environment (PIEE) by November 2, 2026, organized into separate technical, past performance, and price volumes.
Industrial Truck, Tractor, Trailer, and Stacker Machinery Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 18 days
View Details
NAICS: 332912
New
Federal
HIGH LIFT ADAPTER ADU-954/E, Outriggers, Push Up Adapter
Solicitation # N6833526R1091
Solicitation N68335-26-R-1091 is a Small Business Set Aside for a five-year Indefinite Delivery Indefinite Quantity (IDIQ) fixed-price contract to manufacture and deliver peculiar support equipment for the F/A-18E/F and EA-18G programs. The scope of work includes the production of High Lift Adapter Outriggers (P/N 4097AS265-1), Push Up Adapters (P/N 4097AS200-1), and MHU-191 Munitions Loaders (P/N 3992AS100-1), along with associated Proof Load Certificates. These items are destined for the US Navy, with delivery to Lakehurst, and the Royal Australian Air Force, with delivery to a freight forwarder in California. All equipment must be new, covered by a manufacturer warranty, and adhere to strict marking and packaging standards, including MIL-STD-130, MIL-STD-129R, and ASTM D3951-18. Award will be determined using a best-value trade-off process weighing price and delivery lead time as approximately equal factors. To be technically acceptable, offerors must be registered small businesses in SAM.gov, propose a delivery schedule of eight months or less, and provide a detailed delivery narrative. Critical compliance requirements include CMMC Level 2 certification and a current NIST SP 800-171 assessment recorded in the Supplier Performance Risk System. Proposals must include comprehensive cost and pricing data, with certified data required for thresholds exceeding 10 million dollars. All submissions are due by November 23, 2026, to the designated point of contact.
Fluid Power Valve and Hose Fitting Manufacturing

POSTED

2 days ago

DEADLINE

in 25 days
View Details
NAICS: 332710
New
Federal
Anchor Tiedown Weldment
Solicitation # N68335-26-Q-1184
The Naval Air Warfare Center Aircraft Division intends to award a sole source contract to Vital Link, Inc. for the procurement of two Anchor Tiedown Weldments, part number 602145-01. These hardware components are essential for the maintenance of F-414 engines within test cells as part of the Kuwait F/A-18 E-F Super Hornet Program. The selected vendor is responsible for the fabrication and pull testing of the weldments to ensure operational readiness. Vital Link, Inc. has been identified as the only capable source due to its status as the original equipment manufacturer and its possession of the necessary technical data. This procurement is being conducted under the authority of 10 U.S.C. 2304(c)(1) and FAR 6.302-1. While this is not a request for competitive proposals, the government will consider responses within fifteen days of publication, provided the respondent is registered in the System for Award Management.
Machine Shops

POSTED

2 days ago

DEADLINE

in 21 days
View Details
NAICS: 333515
New
Federal
PERISHABLE TOOLING FOR OUTER WING PANEL (OWP) AILERON HINGE REPLACEMENTS
Solicitation # N68335-27-Q-1003
The Naval Air Warfare Center Aircraft Division in Lakehurst, New Jersey, intends to award a sole source contract to J&S Tool, Inc. for the procurement of perishable tooling required for Outer Wing Panel aileron hinge replacements. This tooling supports the F/A-18 E/F and EA-18G aircraft and must be manufactured, assembled, inspected, and delivered in accordance with specific repair instructions and part numbers. Although The Boeing Company is the original equipment manufacturer, a licensing agreement allows the government to purchase these specific components directly from approved suppliers. Consequently, the government is utilizing the authority of 10 U.S.C. 2304(c)(1) and FAR 6.302-1 to negotiate directly with J&S Tool, Inc. as the only responsible source capable of satisfying the requirement.
Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

2 days ago

DEADLINE

in 21 days
View Details
NAICS: 332710
New
Federal
BRACE, AIRCRAFT GROUND SERVICING
Solicitation # N68335-26-Q-1194
The Naval Air Warfare Center Aircraft Division intends to negotiate a sole source contract with Northrop Grumman Systems Corporation for the procurement of four aircraft ground servicing braces. These components, identified by part number 74D110613-1007 and national stock number 1730-01-473-3572, are required to support the Royal Australian Air Force F/A-18F and EA-18G program. The braces are critical for maintaining operational readiness, as they secure the stabilizer in a trim or specific leading-edge-down position during essential maintenance tasks such as engine or stabilizer replacement. Northrop Grumman is designated as the sole source for this requirement because, as the original equipment manufacturer, they possess the necessary technical data and production experience. The procurement is being conducted under the authority of 10 U.S.C. 2304(c)(1) and FAR 6.302-1. The equipment features a specialized tension bolt designed to fail during overload conditions to prevent aircraft damage. This presolicitation is managed by the Department of Defense with performance taking place in Lakehurst, New Jersey.
Machine Shops

POSTED

2 days ago

DEADLINE

in 21 days
View Details
NAICS: 336419
New
Federal
Adapter, Hellfire Missile (Upper) and Adapter, Hellfire Missile (Lower)
Solicitation # N6833526Q1186
The Naval Air Warfare Center Aircraft Division (NAWC-AD) is soliciting quotes for a Firm Fixed Price contract to procure 20 units of Upper Hellfire Missile Adapters (Part 1517AS106-1) and 20 units of Lower Hellfire Missile Adapters (Part 1517AS107-1), along with associated technical data. These items support the AH-1Z and UH-1Y Foreign Military Sales case for the Czech Ministry of Defense. This procurement is a 100% Small Business Set-Aside under NAICS code 336419. The final deadline for submission is November 10, 2026, with all proposals required to be submitted electronically to the point of contact, Juan Carlos Belmonte. Award will be granted based on the Lowest Price Technically Acceptable (LPTA) method. To be considered technically acceptable, offerors must be a certified small business, provide pricing for all CLINs, and commit to a delivery schedule of 90 calendar days after the award date. Due to the presence of Controlled Unclassified Information (CUI) and export-controlled technical data, offerors must provide a certified DD Form 2345 and proof of CMMC Level 2 self-assessment via the Supplier Performance Risk System (SPRS) to access the technical data packages. Additionally, the contract requires strict adherence to MIL-STD-129 and MIL-STD-130 for packaging, marking, and unique item identification. Shipping is quoted as FOB Origin, with hardware delivery to Gulfport, Mississippi, and technical data delivery to Joint Base MDL, New Jersey.
Other Guided Missile and Space Vehicle Parts and Auxiliary Equipment Manufacturing

POSTED

2 days ago

DEADLINE

in 12 days
View Details
New
Federal
Multi-Spectral Test Set (MSTS) Assessment, Evaluation, Inspection, and Repair Services
Solicitation # N68335-27-RFI-1016
The Naval Air Warfare Center Aircraft Division intends to establish a sole-source Basic Ordering Agreement for the assessment, evaluation, inspection, and repair of Multi-Spectral Test Sets, specifically part numbers EU04618-01-FG and EU04618-02-FG, to support the CV-22 aircraft variant. The government intends to award this contract to Textron Systems Corporation, as they are the original equipment manufacturer and hold the proprietary data rights and technical data package for the equipment. This procurement falls under NAICS code 811219 and Product Service Code J066. This notice serves as a sources sought market research tool and is not a request for proposal. While the government intends to proceed with a single source under statutory authority, interested parties may submit capabilities statements for consideration. There is no current commitment to issue a solicitation or award a contract, and the government will not provide payment for any information or responses received during this research phase.

POSTED

3 days ago

DEADLINE

in 2 days
View Details
NAICS: 334419
New
Federal
1553 Data Bus Test Cable Set, PN: 3239AS1510-1, NSN: 4920-01-505-5149; FMS Czech & Nigeria
Solicitation # N68335-27-Q-1018
The Naval Air Warfare Center, Aircraft Division, intends to award a competitive Firm Fixed Price contract for the procurement of two 1553 Data Bus Test Cable Sets, part number 3239AS1510-1. This equipment is designated as Peculiar Support Equipment to support the AH-1Z and UH-1Y programs under Foreign Military Sales for the Nigerian Air Force and the Czech Ministry of Defense. This opportunity is a total Small Business Set Aside under NAICS code 334419, identified by solicitation number N68335-27-Q-1018. While this notice serves as a presolicitation synopsis and not a formal request for proposal, interested vendors should monitor the SAM website for the official solicitation and any subsequent amendments.
Other Electronic Component Manufacturing

POSTED

6 days ago

DEADLINE

in 11 days
View Details
NAICS: 334513
Federal
Portable Oxygen Regulator Test Stand
Solicitation # N68335-27-Q-1033
The Naval Air Warfare Center Aircraft Division intends to award a non-competitive contract to Aerospace Control Products, Inc. for one Portable Oxygen Regulator Test Stand, part number 3949AS100-3. This procurement is part of a Foreign Military Sales case for the Japan Air Self Defense Force E-2D program. The government is utilizing a sole-source justification because Aerospace Control Products, Inc. is the only designer and manufacturer with the proprietary technical data and rights necessary to meet the specific standardization requirements of the Japanese partner. This presolicitation notice, identified by solicitation number N68335-27-Q-1033, was posted on October 22, 2026. While the government intends to proceed on a non-competitive basis, responsible sources may submit capability statements or quotations by the deadline of November 6, 2026. The primary point of contact for this action is Desiree Pendleton.
Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

7 days ago

DEADLINE

in 8 days
View Details
NAICS: 334513
Federal
Aircraft Pressurized Cabin Leakage Tester (APCLT)
Solicitation # N68335-26-Q-1204
The Naval Air Warfare Center Aircraft Division intends to negotiate a sole source contract with Hydraulics International, Inc. for the procurement of one Aircraft Pressurized Cabin Leakage Tester. This equipment, identified by part number 4129AS0100-1 and national stock number 4920-01-658-2036, is essential for the Royal Australian Air Force Program supporting F/A-18F and EA-18G aircraft. The portable unit utilizes facility compressed air to test canopy seals and pressurized cabins for leaks and pressure regulation capabilities, which is critical for maintaining operational readiness. Because Hydraulics International, Inc. is the original equipment manufacturer, the government has determined they are the only source with the necessary technical data and experience to provide the system. This procurement is being conducted under the authority of 10 U.S.C. 2304(c)(1) and FAR 6.302-1. The requirement falls under NAICS code 334513 and PSC code 4920, with performance taking place in Lakehurst, New Jersey.
Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

9 days ago

DEADLINE

in 14 days
View Details
NAICS: 541330
Federal
Shipboard Power Systems and Mechanical Interface AnalysisThis small business set-aside subcontract with the Navair Warfare Ctr Aircraft Division involves providing specialized analysis of shipboard power systems and mechanical interface issues for Support Equipment projects at NAWCAD Lakehurst. The scope of work focuses on evaluating electrical power compatibility and distribution on shipboard platforms, while providing critical assistance for Integrated Logistics Support certifications. The selected contractor will be responsible for delivering detailed interface analysis reports and supporting documentation for ILS certifications. Due to the nature of the work, a Secret security clearance is required. The response deadline for this opportunity is December 3, 2026.
Engineering Services

POSTED

10 days ago

DEADLINE

in about 1 month
View Details
NAICS: 541370
Federal
SE Engineering Drawing and Documentation ServicesThis subcontract opportunity, titled SE Engineering Drawing and Documentation Services, supports prime contractors on NAWCAD Lakehurst SE projects for the Department of Defense. The selected provider will be responsible for creating and revising engineering drawings using AutoCAD and Pro-Engineering Modules, preparing test procedures, and managing data within SEMS and Naval Air Technical Data systems. Key deliverables include finalized technical manuals and engineering drawing packages. The contract is designated as a Total Small Business Set Aside under NAICS code 541370. Due to the nature of the work, personnel are required to maintain a Secret security clearance. Interested parties must submit their responses by December 3, 2026, for performance located in zip code 08733.
Surveying and Mapping (except Geophysical) Services

POSTED

10 days ago

DEADLINE

in about 1 month
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

NAICS: 811310
Awarded
Federal
PM/O&A Molten Salt
Solicitation # FA8132-16-Q-0017

POSTED

over 10 years ago

CLOSED

about 10 years ago
View Details
NAICS: 811310
Awarded
Federal
AIR HANDLER CHILLER MAINTENANCE
Solicitation # FA8601-16-T-0328
FA8601 Aflcmc Pzio

POSTED

over 10 years ago

CLOSED

about 10 years ago
View Details
NAICS: 811310
Federal
81--Inspection, full maintenance service & repair of elevators and dumbwaiter at VANCHCS
Solicitation # VA26116Q0852
261-NETWORK Contract Office 21 (36C261)

POSTED

over 10 years ago

DEADLINE

N/A
View Details
NAICS: 811310
Awarded
Federal
PREVENTATIVE MAINTENANCE FOR AB SCIEX SPECTROMETER
Solicitation # EA-133C-16-RQ-0419
Department Of Commerce Noaa

POSTED

over 10 years ago

CLOSED

over 10 years ago
View Details
NAICS: 811310
Awarded
Federal
Maintenance and Repair of Refrigeration Systems and Heating, Ventilation, and Air Conditioning Systems, Commissaries and CDC, MCAS Iwakuni and Kure Pier 6, Japan
Solicitation # W912HV-16-R-0006
W2SN Endist Japan

POSTED

over 10 years ago

CLOSED

over 10 years ago
View Details
NAICS: 811310
Awarded
Federal
Computer Numerical Control (CNC) Repair
Solicitation # F3QCCL5356A001

POSTED

over 10 years ago

CLOSED

over 10 years ago
View Details
NAICS: 811310
Awarded
Federal
Rice Lake HREP Pump Repairs
Solicitation # W912EK-16-P-0040

POSTED

over 10 years ago

CLOSED

over 10 years ago
View Details
NAICS: 811310
Awarded
Federal
Notice of Intent to Sole Source for the Repair of Generator 2 at the Freedom Center
Solicitation # HSTS01-16-Q-BMS026
Contracting And Procurement

POSTED

over 10 years ago

CLOSED

over 10 years ago
View Details
NAICS: 811310
Awarded
Federal
Repair Anchorage Bar Assemblies
Solicitation # W912EK-16-T-0044

POSTED

over 10 years ago

CLOSED

over 10 years ago
View Details
NAICS: 811310
Awarded
Federal
The Government requires instrument maintenance service on the SOC 100 HDR manufactured by Surface Optics Corporation according to the Performance Work Statement listed below in section vi.
Solicitation # W911QX-16-T-0211
W6QK Acc-Apg Adelphi

POSTED

over 10 years ago

CLOSED

over 10 years ago
View Details
NAICS: 811310
Awarded
Federal
Vertical Transportation Equipment (VTE) Maintenance, Repair & Inspection Services
Solicitation # FA4417-16-T-0013
FA4417 1 Socons

POSTED

over 10 years ago

CLOSED

over 10 years ago
View Details
NAICS: 811310
Awarded
Federal
SOLE SOURCE PROCUREMENT TO COLTEC INDUSTRIES, INC. dba FAIRBANKS MORSE ENGINE FOR VENDOR SERVICES TO REMOVE/REPAIR/REINSTALL DIESEL ENGINE UPPER CRANKSHAFT AND VERTICAL DRIVE ASSEMBLY
Solicitation # N39040-16-T-0214
Portsmouth Naval Shipyard Gf

POSTED

over 10 years ago

CLOSED

over 10 years ago
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS