Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

BLOCK, RUBBER

Active
SPE8E6-26-T-4040Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of 1,259 units of rubber blocks with NSN 9320-01-565-6471, under solicitation SPE8E6-26-T-4040, issued by the Defense Logistics Agency District San Joaquin. The item must be delivered FOB origin within 167 days of contract award, with a required delivery date of November 21, 2026, and a need ship date of February 1, 2027. Packaging and marking must strictly comply with MIL-STD-129R, ASTM D3951, and the DLA Master List of Technical and Quality Requirements, which supersede any conflicting standards. All packaging must adhere to RP001 DLA Packaging Requirements for Procurement, including palletization, unit of issue, and quantity per unit pack as specified. The government identification must be removed from non-accepted supplies per RQ011. The contract enforces a zero variance in quantity and inspection and acceptance occur at the destination. The delivery address is DLA District San Joaquin, Recipient Warehouse 57 in Tracy, California, and transportation logistics must follow DLAD Proc Notes C19 and C20. The solicitation is set aside for Women-Owned Small Businesses under NAICS code 326299, with a response deadline of August 17, 2026. Technical and quality requirements referenced via R and I numbers are governed by the DLA Master List, using the revision in effect on the solicitation issue date.

General Info

1,259 rubber blocks FOB origin by Nov 21, 2026, to Tracy, CA, for Women-Owned Small Businesses, per MIL-STD-129R and DLA specs.

Agency

Department Of Defense → DLA DIST SAN JOAQUINView Agency

NAICS

326299 - All Other Rubber Product ManufacturingView NAICS

Place of Performance

REC WHSE 57, TRACY, CA, 95304-5000, US

Set-Aside

WOSB

Documents

(1)

RFQ SPE8E6-26-T-4040 for DLA Troop Support Construction & Equipment

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DLA DIST SAN JOAQUIN
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → DLA DIST SAN JOAQUIN
View Agency Profile
Office AddressUS
Contacts
Ryan Kirlin
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
BLOCK,RUBBER
BLOCK<(>,<)> RUBBER
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RANGE SYSTEMS INC 08QN6 P/N RB1000
TDP Rev A Gen 1 IAW REFERENCE STD NR MIL-STD-129R(3) REVISION NR R DTD 02/25/2023 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017756926 0001 EA 1,259.000
NSN/MATERIAL:9320015656471
DELIVERY (IN DAYS):0167
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
SPE8E6-26-T-4040
SECTION B
PR: 7017756926 PRLI: 0001 CONT’D
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:1
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
Need Ship Date:02/01/2027 Original Required Delivery Date:11/21/2026
SPE8E6-26-T-4040 NSN/Part Number: 9320-01-565-6471 Quantity: 1,259 EA Purchase Request: 7017756926QTY: 1259 Delivery: 167 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 326299
New
DIBBS
RUBBER SHEET, SOLID
Solicitation # SPE8E6-26-T-3989
The contract is for the procurement of 3 sheets of solid rubber material, measuring 0.250 inches thick, 36 inches wide, and 36 inches long, with a smooth finish on both sides. The item is identified by NSN 9320-00-042-3117 and is being acquired under solicitation SPE8E6-26-T-3989, with a response deadline of August 17, 2026. The delivery is scheduled 167 days after contract award. The specification prohibits the presence of asbestos as defined in FED-STD-313 and mandates compliance with technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, accessible via the DLA website. Sampling and inspection procedures must follow MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based sampling plan, with acceptance criteria requiring zero non-conformances unless otherwise stated in the contract. Attributes are to be classified with verification levels or AQLs of VII, IV, and II for critical, major, and minor characteristics respectively, with unspecified attributes treated as major. The procurement is fully competitive under a federal or military specification, and performance is to be delivered to New Cumberland, Pennsylvania, 17070-5002. The contracting office is the DLA New Cumberland Facility under the Department of Defense, with Ryan Kirlin designated as the primary point of contact.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 326299
New
DIBBS
CONTRACTOR FIRST ARTIC
Solicitation # SPE8ED-26-T-1237
The contract is for the procurement of three collapsible fabric tanks, each identified by NSN 5430015277233 and part number ATPD2295 Class I Type I, with an additional line item for a first article test requirement. Each tank is priced at $3.00, with a total quantity of three units, and delivery is required within 20 days FOB origin with no tolerance for quantity variance. The product must comply with stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, which override other standards such as ASTM D3951. Packaging must adhere to MIL-STD-129 for marking and labeling, with palletization governed by DLA Packaging Requirements, and hazardous material handling follows TQ requirement IP025 per FED-STD-313. Inspection and acceptance occur at the manufacturer’s origin, and sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated. Configuration changes require formal engineering change proposals, and the contractor must implement a quality system certified to ANSI/ISO/ASQ 9001-2015 excluding paragraph 7.3. All items must be marked per MIL-STD-130N and shipped by traceable means only, delivered to the designated military facility at Camp Lejeune, North Carolina. The first article test, listed as a separate line item with one unit, is mandatory and non-reimbursable unless specifically waived, and its completion is a precondition for production delivery. The contract incorporates detailed technical documentation referenced through drawing and quality assurance provision numbers, with all data available through the DLA’s eProcurement portal during the solicitation window.
CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 326299
New
DIBBS
RUBBER SHEET, SOLID
Solicitation # SPE8E6-26-T-3990
The contract is for the procurement of five rubber sheets, solid, with dimensions of 36 inches in length, 36 inches in width, and 0.125 inches in thickness, smooth on both sides. The item is identified by NSN 9320-00-061-0675 and is governed by DLA packaging requirements and technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue or award date depending on acquisition size. The specification mandates compliance with procurement clause 52.211-9G03 regarding the marking of individual sheets, and covered defense information may apply. Government identification must be removed from non-accepted supplies. Delivery is required within 167 days after order, under purchase request 7017758597. The solicitation number is SPE8E6-26-T-3990, issued on August 5, 2026, with responses due by August 17, 2026. The NAICS code is 326299, and the contracting office is the DLA New Cumberland Facility under the Department of Defense. The primary point of contact is Christopher Barraro, reachable via email and phone provided. The place of performance is New Cumberland, Pennsylvania, with a zip code of 17070-5002.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 326299
New
DIBBS
COVERALL, FLOTATION
Solicitation # SPE8E9-26-T-3365
The contract pertains to the procurement of 8 units of a flotation coverall, identified by NSN 4220-01-486-8281 and manufacturer part number MS2175GS-2-XXL from MUSTANG SURVIVAL MFG, INC, under solicitation SPE8E9-26-T-3365. Delivery is required within 167 days of contract award, with a final delivery deadline of February 1, 2027, and the items must be shipped FOB origin. The unit price is $8.00 per unit, totaling $64.00, with zero variance allowed in quantity. Inspection and acceptance occur at the destination, and packaging must comply with ASTM D3951 while adhering to all applicable DLA Master List of Technical and Quality Requirements, which take precedence. All packaging and labeling must follow MIL-STD-129, and palletization must meet RP001 guidelines. The item has a mandatory 120-month shelf life with no extension permitted. Mercury or mercury-containing compounds are strictly prohibited except in limited functional applications such as batteries, fluorescent lamps, or specified instruments, with any portable devices containing mercury required to have shockproof construction and a secondary containment barrier per NAVSEA 5100-003D. The delivery address is DLA Distribution’s New Cumberland facility in Pennsylvania, and the unit of issue is each (EA). The contract references restricted defense information and mandates compliance with all relevant DoD procurement and environmental safety standards.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 326299
New
DIBBS
RUBBER SHEET, CELLUL
Solicitation # SPE8E6-26-T-3988
The contract pertains to the procurement of rubber sheet, cellular, with specific technical and quality requirements outlined under NSN 9320-00-069-5176. The material must be 1/16 inch thick, 36 inches wide, and 36 inches long, with a smooth finish on both sides, and strictly prohibits the use of asbestos as defined in FED-STD-313. An exception to AMS 3195 Revision C allows the low temperature brittleness test to replace the compression deflection at low temperature test. The specification references the DLA Master List of Technical and Quality Requirements for additional technical and quality criteria identified by R or I numbers, with applicable revisions controlled by the solicitation or award date depending on acquisition size. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based plan; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, and unspecified attributes are deemed major. Zero non-conformances are required in sampling unless otherwise stated. Government identification must be removed from non-accepted supplies. The item is procured as fully competitive under a federal specification. Forty-eight units are required under purchase request 7017758593, with delivery due within 63 days of award. The solicitation, issued under SPE8E6-26-T-3988, opened on August 5, 2026, with responses due by August 17, 2026, and is managed by the Department of Defense through the Cherry Point location, with Christopher Barraro as the primary point of contact.
CHERRY POINT PHANTOM RD BLDG

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 326299
New
DIBBS
Supplier of Approved Filter Components (Sub-tier Manufacturing)
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 326299
New
DIBBS
Nonmetallic Hose Assembly SupplyThe contract is for the supply of a commercial off-the-shelf nonmetallic hose assembly with a 0.310-inch inner diameter and a total length of 23.0 inches, strictly adhering to the designated National Stock Number and approved manufacturer part numbers. The item must meet all technical and compliance requirements specified for use within Department of Defense systems, ensuring interoperability and reliability under operational conditions. The solicitation is issued as a subcontract under NAICS code 326299 and is being managed by the Maritime Supply Chain ESOC Buys group within the Department of Defense. The contract was posted on August 4, 2026, with a firm response deadline of August 17, 2026, and the place of performance is designated as Tampa, Florida, with a zip code of 33614-6409. All proposals must align with the exact dimensional and material specifications outlined, and only assemblies sourced from approved manufacturers will be considered. The procurement is conducted through the DIBBS platform, and interested parties are required to review the full solicitation details via the provided link to ensure complete compliance with submission protocols and technical requirements.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 326299
New
DIBBS
Precision O-Ring Manufacturing and Supply
FLUID HANDLING DIVISION

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 326299
New
DIBBS
BOOT, DUST AND MOISTURE
Solicitation # SPE7LX-26-U-9264
The contract seeks the procurement of 4,574 units of a BOOT, DUST AND MOISTURE SEAL specifically designed for tail rotor blade applications, identified by NSN 5340-01-108-3681, under solicitation SPE7LX-26-U-9264. The delivery must be completed within 104 days after award, with FOB Origin terms applying, meaning the contractor assumes all responsibilities and risks until the point of shipment. This is an indefinite-delivery contract with a maximum estimated value of $350,000, issued as a Women-Owned Small Business Set-Aside under NAICS code 326299. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, and the item must adhere to specified drawing controls, with only approved sources currently recognized, though additional qualified sources may be considered for future acquisitions. The product must comply with stringent environmental directives, including a complete prohibition on Class I ozone-depleting chemicals, which supersedes any conflicting specification but does not reduce product performance obligations. Substitutes require prior approval, and all materials must be labeled according to OSHA’s Hazard Communication Standard unless exempted under specific federal statutes. The item is subject to rigorous packaging, marking, and preservation standards, requiring compliance with MIL-STD-2073-1E and DLA Packaging Requirements (RP001), using box-type unit containers marked per MIL-STD-129 with data matrix barcodes, shelf-life expiration labels, and government property identification per MIL-STD-130N. Preservation must maintain a clean, dry condition (CLNG/DRY code 33) with a non-extendable shelf life of 180 months. Export control restrictions apply under ITAR or EAR, mandating that all technical data be handled only by contractors with JCP certification, who have completed DLA’s export-controlled data training and questionnaire, and are formally approved for access. Cybersecurity requirements are enforced via CMMC Level 2 certification, applicable to the contractor organization as a C3PAO, ensuring adequate safeguards for covered defense information. Inspection and acceptance occur at origin, governed by FAR 52.246-2, and all invoices must be submitted electronically through Wide Area WorkFlow. The contractor must also remove government markings from all rejected items and comply with U.S.-flag vessel mandates for ocean transport unless a formal
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 326299
New
DIBBS
PAD, CUSHIONING
Solicitation # SPE7L1-26-Q-1394
The contract is for the procurement of 15,000 units of a molded track cushioning pad assembly, identified by NSN 5340-01-587-6763, under solicitation SPE7L1-26-Q-1394. Delivery is required within 146 days of award, with the solicitation issued on August 4, 2026, and responses due by August 19, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Packaging must comply with DLA standards, and government identification must be removed from any non-accepted supplies prior to delivery. The item includes technical data subject to export control under either ITAR or EAR, restricting disclosure to foreign persons regardless of location and requiring prior authorization from the Department of State or Commerce. Only contractors with approved US/Canada Joint Certification Program status, completed DOD export control training, and DLA authorization may access this controlled data. The acquisition falls under NAICS code 326299 and is managed by the Department of Defense’s Land Supply Chain, with Rodney McNinch listed as the primary point of contact.
LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 326299
New
DIBBS
BELT, V
Solicitation # SPE7L3-26-T-146Z
This contract is for the procurement of one Belt, V with NSN 3030-01-539-5803 under solicitation SPE7L3-26-T-146Z, issued by the Department of Defense through Land Supplier Operations Vehicle Support. The item must be delivered within five days of award, FOB origin, with no variance allowed in quantity. Inspection and acceptance both occur at the destination, and packaging must strictly comply with MIL-STD-2073-1E and MIL-STD-129, including specified preservation methods, wrapping, and marking requirements. The delivery address is the Distribution Management Office at Twenty-Nine Palms, California, with a designated shipping point and a unique military freight identifier for tracking. Shipment must use traceable freight methods; parcel post is prohibited. The required delivery date is August 5, 2026, and the solicitation closed on August 17, 2026, with technical and quality requirements governed by the DLA Master List referenced in the contract. All packaging and marking must align with DLA packaging directives, and the item’s unit of issue is each, with a total price of $1.00. The contract includes specific government-only fields for internal tracking and distribution codes.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 326299
New
DIBBS
FLAME ARRESTER, VENT
Solicitation # SPE8ED-26-T-1217
The contract specifies the procurement of one flame arrester, vent with NSN 5430-01-724-2662 and part number 60-1006RK-01 from RKI INSTRUMENTS, INC., under solicitation SPE8ED-26-T-1217. Delivery is required within five days of award, FOB origin, with no tolerance for quantity variance, and inspection and acceptance occur at the destination facility. Sampling and quality verification must adhere to MIL-STD-1916 or ASQ H1331 Table 1 with zero nonconformances permitted unless otherwise stated; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, with unspecified attributes considered major. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersedes commercial standards like ASTM D3951. Packaging must comply with MIL-STD-129 and DLA packaging requirements RP001, with hazardous material handled according to TQ requirement IP025 and non-hazardous material commercially packaged per ASTM D3951 when not overridden by DLA requirements. All packaging must be marked and labeled appropriately, and palletization must follow DLA standards. The material must be shipped by the fastest traceable means, with parcel post prohibited, and delivered to Sierra Army Depot in Herlong, CA. The required delivery date is July 24, 2026, and government-use identifiers and shipping instructions are strictly defined, including a designated point of contact and electronic procurement link.
CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

1 day ago

DEADLINE

in 12 days
View Details

More opportunities from Department Of Defense → DLA DIST SAN JOAQUIN

Same awarding agency

NAICS: 313210
New
DIBBS
EXTINGUISHER, FIRE
Solicitation # SPE8E6-26-T-4047
The contract pertains to the procurement of five fire extinguishers identified by NSN 4210-01-621-8544 and part number 218082389 under solicitation SPE8E6-26-T-4047, issued by the Defense Logistics Agency Distribution San Joaquin. Delivery is required within 167 days from the contract award, with shipment FOB origin and inspection and acceptance occurring at the destination facility in Tracy, California. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, including marking per MIL-STD-129, utilizing unit container code 10 and pack code U, with no special marking required. The extinguishers must be free of intentionally added mercury or mercury-containing compounds except for specific, approved uses such as in batteries, fluorescent lamps, sensors, or weapon systems as defined by NAVSEA, with portable devices containing mercury requiring shockproof construction and a secondary containment boundary as per NAVSEA 5100-003D. The contract enforces strict adherence to technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue date. The delivery window is set for February 1, 2027, with an original required delivery date of January 28, 2027, and no quantity variance is permitted. Hazardous material shipping must follow DLAD PROC NOTE C19 and C20, with the consignee identified as DLA Distribution San Joaquin at the Tracy warehouse address.
Broadwoven Fabric Mills

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 316990
New
DIBBS
FLASHLIGHT
Solicitation # SPE8E7-26-T-3496
The contract specifies the procurement of 44 units of a flashlight with NSN 6230-01-618-0929 and part number 90513 from STREAMLIGHT INC, under solicitation SPE8E7-26-T-3496. Delivery is required within 10 days of the award date, with FOB origin terms and no variance allowed in quantity. Inspection and acceptance occur at the destination, and all packaging must comply strictly with DLA’s Master List of Technical and Quality Requirements, particularly IP025, superseding ASTM D3951 unless the item is non-hazardous. Packaging and labeling must adhere to MIL-STD-129, and palletization must follow RP001 DLA Packaging Requirements. The item is not classified as hazardous under FED-STD-313, so commercial packaging per ASTM D3951 applies only if DLA requirements do not override it. The delivery address is W62G2T W1A8 DLA Dist San Joaquin, Tracy CA 95304-5000, with the original delivery deadline set for November 21, 2026, and a need ship date of August 28, 2026. Transportation and shipping instructions refer to DLAD Proc Notes C19 and C20. The contract’s unit price is $44.00 per unit, totaling $1,936.00, and the primary point of contact is Kelly Mitchell at Kelly.Mitchell@dla.mil. All technical and quality standards referenced are governed by the latest version of the DLA Master List effective on the solicitation issue date.
Other Leather and Allied Product Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333414
New
DIBBS
HEATING BLANKET, ELE
Solicitation # SPE8E8-26-T-5047
The contract is for the procurement of seven electric heating blankets identified by NSN 4520-01-708-1124 and part number T00233-5083-2 from Robertson Manufacturing Inc, with a unit price of $7.00 per unit and a total contract value of $49.00. Delivery is required FOB origin within 167 days from the contract award, with zero tolerance for quantity variance, and all items must be inspected and accepted at the destination. Packaging must comply with ASTM D3951 unless superseded by stricter requirements from the DLA Master List of Technical and Quality Requirements, which take precedence. All packaging and labeling must conform to MIL-STD-129, and palletization must meet DLA Packaging Requirements for Procurement, with the Unit of Issue specified as each and the Quantity per Unit Pack set to 1. The shipment must be delivered to the designated receiving warehouse in Tracy, California, following DLA Transportation Procurement Notes C19 and C20. The original required delivery date is March 28, 2027, with a need ship date of February 1, 2027, under solicitation SPE8E8-26-T-5047, which was posted on August 5, 2026, and closed on August 17, 2026. The contracting agency is the Department of Defense, specifically DLA District San Joaquin, with Alexis Selby listed as the primary point of contact.
Heating Equipment (except Warm Air Furnaces) Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 326111
New
DIBBS
FIREMEN'S TROUSER
Solicitation # SPE8E6-26-T-4041
The contract pertains to the procurement of Firemen's Trousers, identified by NSN 4210-01-545-6524 and part number GSADLA002000928820-44X32-PANT, with a requirement for 15 units delivered under solicitation SPE8E6-26-T-4041. The item is classified as a TYPE I (Code S) with a non-extendable shelf life of 60 months, subject to specific shelf-life marking requirements and compliance with MIL-STD-2073-1E packaging standards. Packaging must adhere to DLA’s procurement requirements, including MIL-STD-129 marking and palletization guidelines, with no tolerance for quantity variance—precisely 15 units must be delivered. Delivery is FOB origin, with inspection and acceptance occurring at the destination warehouse in Tracy, California, and the required delivery window is 167 days from the contract date, with an original deadline of November 25, 2026, and a need ship date of February 1, 2027. The contract incorporates all referenced technical and quality requirements from the DLA Master List, and compliance is mandatory. The unit of issue is PR (pair), with a unit price of $15.00 and a total contract value of $225.00. Transportation and shipping instructions are governed by DLA Procurement Notes C19 and C20, and the items must be shipped to the designated receiving warehouse address in Tracy, CA. The solicitation was posted on August 5, 2026, with a response deadline of August 17, 2026, under NAICS code 326111 for textile apparel manufacturing. The responsible contracting office is DLA Dist San Joaquin, with primary point of contact John Lieb. All supplies must be free of government identification if not accepted, and hazardous material packaging standards are applicable where relevant.
Plastics Bag and Pouch Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333413
New
DIBBS
FAN, CENTRIFUGAL
Solicitation # SPE8E7-26-T-3471
This contract outlines the procurement of a centrifugal fan with part number 0574300003M and NSN 4140011665049, issued by DLA District San Joaquin under solicitation SPE8E7-26-T-3471. The requirement specifies delivery of 14 units with a delivery timeframe of 167 days from contract award, with FOB origin terms and inspection and acceptance occurring at the destination warehouse in Tracy, California. Strict compliance with DLA’s Master List of Technical and Quality Requirements, identified by R and I numbers, governs all technical and quality standards, superseding other standards such as ASTM D3951. Packaging must adhere to MIL-STD-129 and RP001 DLA Packaging Requirements, with palletization and unit of issue specified per contract. The fan must be free of intentionally added mercury or mercury-containing compounds, except for approved applications such as batteries, fluorescent lamps, sensors, or naval-specified reagents, with portable mercury-containing devices requiring shockproof construction and secondary containment per NAVSEA 5100-003D. The contract permits no variance in quantity, with delivery required no later than February 1, 2027, and original delivery due by December 23, 2026. Only approved suppliers including LAU Industries Inc and United Refrigeration Inc are qualified, and all shipments must be addressed to the designated DLA receiving warehouse.
Industrial and Commercial Fan and Blower and Air Purification Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 314999
New
DIBBS
EXTINGUISHER, FIRE
Solicitation # SPE8E6-26-T-4008
This contract calls for the procurement of 304 units of a portable fire extinguisher identified by NSN 4210-01-438-3933, with a unit price of $304.00 and a total contract value of $92,416. Delivery is required within two days of award, FOB destination, to the designated receiving warehouse in Tracy, California, with no variance allowed in quantity. The extinguishers must comply with MIL-STD-2073-1E packaging standards and be marked according to MIL-STD-129, with palletization following DLA packaging requirements. All packaging materials and methods must meet specific hazardous material handling guidelines under IP025, and no mercury or mercury-containing compounds may be intentionally added or come into direct contact with the product unless expressly exempted for functional components like batteries or sensors as permitted by NAVSEA. The extinguishers must be shipped in accordance with DLA transport notes C19 and C20, and the supplier must include approved Safety Data Sheets and Hazard Communication Standard-compliant labels as mandated by OSHA’s updated regulations since June 1, 2015. The supplier is also required to train employees on these safety documentation and labeling requirements. The solicitation is a total small business set-aside under NAICS code 314999, with responses due by August 17, 2026, and performance governed by DLA’s master list of technical and quality requirements referenced by R and I numbers.
All Other Miscellaneous Textile Product Mills

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333414
New
DIBBS
IMPELLER, FAN, CENTRIFUG
Solicitation # SPE8E7-26-T-3494
This contract specifies the procurement of a centrifugal fan impeller identified by part number ES9500-6354, with an approved source code of 0V5R4 under Snowbird Technologies Inc. The item is governed by technical and quality requirements from the DLA Master List, which take precedence over all other standards including ASTM D3951, and must be packaged and labeled in strict compliance with MIL-STD-129 and DLA packaging guidelines as outlined in RP001. The part is tied to a specific drawing revision A dated 10/20/2011 and is associated with the government NSN 4140015924133. The contract requires delivery of ten units FOB origin with zero allowable variance in quantity and inspection and acceptance to occur at the destination warehouse in Tracy, California. Packaging must conform to ASTM D3951 unless overridden by higher-priority DLA requirements, and all units must be palletized per DLA specifications. The delivery timeline mandates fulfillment within 124 days, with an original required delivery date of January 12, 2027, and a need ship date of December 20, 2026. The contract is issued under solicitation SPE8E7-26-T-3494 with a unit price of $10 per unit and a total value of $100. Transportation and shipping logistics are governed by specific DLA procedural notes, and all documentation and labeling must adhere to government protocols including the removal of government identification from non-accepted items. The point of contact for procurement inquiries is Kelly Mitchell of the Department of Defense, DLA District San Joaquin.
Heating Equipment (except Warm Air Furnaces) Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339950
New
DIBBS
PLATE, INSTRUCTION
Solicitation # SPE8E6-26-T-4069
This contract pertains to the procurement of a PLATE, INSTRUCTION with NSN 9905-14-398-3767 and part number ZB2-BY2101, under solicitation SPE8E6-26-T-4069. A total quantity of 136 units is required, delivered FOB origin with no variance allowed in quantity, and must be delivered within 167 days from the award date. The item is classified as a critical application and is subject to strict technical and quality requirements referenced from the DLA Master List, including packaging standards per MIL-STD-2073-1E and marking requirements per MIL-STD-129. Mercury and mercury-containing compounds are strictly prohibited from direct contact with the item except under narrowly defined exceptions such as functional use in batteries, fluorescent lights, sensors, weapon systems, or specific chemical reagents authorized by NAVSEA, with portable fluorescent lamps and instruments containing mercury requiring shock-proof construction and a secondary containment barrier in accordance with NAVSEA 5100-003D. All packaging and palletization must comply with DLA Packaging Requirements for Procurement, and the item must be delivered to the designated接收 warehouse in Tracy, California, with no special marking required beyond standard compliance. The contract stipulates that inspection and acceptance occur at the destination, and transportation logistics are governed by DLA procedural notes C19 and C20. The delivery timeline allows for an original required delivery date of June 7, 2027, with a need ship date of February 1, 2027, indicating a planned lead time for production and readiness. Unit price is set at $136.00 per unit with no line item price adjustments permitted. The procurement follows DoD authorized units of issue and references the ANSI X12 unit of issue through a specified DLA link. The contracting agency is DLA Dist San Joaquin under the Department of Defense, with Brett Scull as the primary point of contact. Solicitation closed on August 17, 2026, and the NAICS code 339950 identifies the industry classification as other miscellaneous manufacturing. The contract also mandates removal of government identification from non-accepted supplies and incorporates all applicable technical and quality requirements via referenced R and I numbers from the DLA Master List, with revision control dependent on acquisition type and amendment dates.
Sign Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335122
New
DIBBS
FIXTURE, LIGHTING
Solicitation # SPE8E7-26-T-3515
The contract pertains to the procurement of a lighting fixture identified by part number FLC217 and NSN 6210-01-596-7680, with a requirement for 38 units at a unit price of $38.00, totaling $1,444.00. Delivery is specified as FOB origin with a delivery window of 167 days from the contract award, and the destination for both inspection and acceptance is the DLA Distribution San Joaquin receiving warehouse in Tracy, California. Packaging must comply with MIL-STD-2073-1E, including specific preservation methods, materials, and unit packaging as outlined in the contract, with marking following MIL-STD-129 and no special marking codes applied. Palletization must adhere to DLA’s packaging requirements, and transportation logistics are governed by DLAD procedural notes C19 and C20. The contract references technical and quality standards from the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date depending on acquisition size. The solicitation number is SPE8E7-26-T-3515, issued by the Department of Defense under NAICS code 335122, with a response deadline of August 17, 2026, and a required ship date of February 1, 2027, overriding the original delivery requirement of September 9, 2026. The unit of issue is each (EA), and quantity variance is strictly zero percent.
Commercial, Industrial, and Institutional Electric Lighting Fixture Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 314999
New
DIBBS
HOSE ASSEMBLY, NONMETAL
Solicitation # SPE8E6-26-T-4068
This contract pertains to the procurement of a nonmetallic hose assembly with the NSN 4210-01-707-7372 and part numbers 20-100MF50 and FE20-100MF50, requiring a quantity of 16 units identified by the unit of issue AY. The item has a strict non-extendable shelf life of 180 months as specified under RS039 and must comply with DLA packaging standards per MIL-STD-2073-1E and MIL-STD-129 marking requirements, with no special marking codes applied. The hose assembly is subject to technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, and all documentation must adhere to DLA’s source approval and packaging protocols. Delivery is FOB origin with an 80-day lead time, and acceptance occurs at the destination warehouse located at 25600 S Chrisman Road, Tracy, CA 95304-5000. The contract specifies a zero percent variance in quantity and requires the supplier to meet the original required delivery date of December 17, 2026, with a needed ship date of April 13, 2026. Transportation and shipping instructions are governed by DLA procedural notes C19 and C20, and unit of issue conversions must align with the DLA-provided ANSI X12 standard. The solicitation number is SPE8E6-26-T-4068, issued by DLA District San Joaquin under the Department of Defense, with primary point of contact John Lieb.
All Other Miscellaneous Textile Product Mills

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333515
New
DIBBS
INSERT, CUTTING TOOL
Solicitation # SPE8E5-26-T-3828
The contract is for the procurement of 621 units of an insert cutting tool with NSN 3455-01-624-4511 and part number TCMT-32.51-PEM-DPC25UT, issued under solicitation SPE8E5-26-T-3828 by DLA Dist San Joaquin. The unit price is $7017757297 per unit, totaling a contract value based on the specified quantity, with delivery required within 167 days from the award date, FOB origin. The delivery destination is DLA Warehouse 57 in Tracy, California, with inspection and acceptance occurring at the destination. All packaging must comply with ASTM D3951, but DLA Master List of Technical and Quality Requirements take precedence, and marking and labeling must follow MIL-STD-129. Palletization must adhere to DLA Packaging Requirements for Procurement. The product must be delivered no later than February 1, 2027, with an original required delivery date of January 13, 2027, and no variance in quantity is permitted. Transportation logistics are governed by DLAD Proc Note C19 for transportation and C20 for first destination. The contractor is Dorian Tool Intl Inc, and the point of contact is Khue Nguyen. The requirement is tied to NAICS code 333515 and is a federal solicitation issued by the Department of Defense, with responses due by August 17, 2026.
Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333992
New
DIBBS
ELECTRODE, WELDING
Solicitation # SPE8E5-26-T-3795
The contract is for the procurement of welding electrodes under NSN 3439-01-039-3494, with a quantity of 198 cartons, issued through solicitation SPE8E5-26-T-3795 by the DLA San Joaquin office under the Department of Defense. The requirement is classified as fully competitive and governed by military or federal specifications, with technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, identified by R or I numbers, and the applicable revision is determined based on the solicitation issue date or award date depending on acquisition size. Packaging must comply with DLA requirements, and non-accepted supplies must have all government identification removed prior to return. No shelf life restrictions apply to the material. The delivery timeline is set at 157 days after order placement, with the solicitation posted on August 5, 2026, and responses due by August 17, 2026. The NAICS code 333992 indicates this falls under Other Fabricated Metal Product Manufacturing. Performance is to occur in Tracy, California, with a zip code of 95304-5000. Primary point of contact is Ira Hedgepeth, reachable via phone and email provided. The solicitation is published on the DIBBS platform, and no set-aside preferences are indicated, meaning the opportunity is open to all eligible vendors without restriction.
Welding and Soldering Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details