Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Bottom Paint and Anti-Fouling Coating Application

Active
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract outlines the removal of existing bottom paint and the application of new anti-fouling coatings to a vessel hull, ensuring optimal performance and protection against marine growth. This work is classified as a subcontract under NAICS code 336612, which pertains to ship and boat building and repairing, and is associated with the Department of the Interior under the agency name Ser WEST. The task is scheduled to take place following the posting date of April 29, 2026, with no specific location provided for performance, indicating flexibility in where the work may occur. The scope is focused solely on hull preparation and coating, requiring skilled application techniques and adherence to environmental and maritime standards for anti-fouling systems. There is no set-aside type specified, suggesting the opportunity is open to general subcontracting participation without preference for small businesses or other categories. The procurement is accessible via a SAM.gov link, and while no point of contact is listed, interested parties must reference the provided portal for further details and submission requirements.

General Info

Remove old hull paint, apply new anti-fouling coating per NAICS 336612 for Ser WEST, post-April 29, 2026.

Agency

Department Of The Interior → Ser WEST(52000)View Agency

NAICS

336612 - Boat BuildingView NAICS

Place of Performance

MS

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

Posted

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of The Interior → Ser WEST(52000)
ContactsNo contacts available
OfficeN/A
Organization / Agency
Department Of The Interior → Ser WEST(52000)
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Remove existing bottom paint and apply new anti-fouling coatings to the vessel hull.

Similar Contracts

Same NAICS industry code

NAICS: 336612
New
Federal
CONNECTOR,THRU-HULLThis contract pertains to the procurement of a thru-hull connector assembly designated as SPECIAL EMPHASIS MATERIAL (Level I), critical to the safe operation of shipboard systems where failure could result in catastrophic loss of life, vessel, or mission. The item must comply with specification CPG 1025 and associated drawings, with strict requirements for material composition, welding, inspections, and traceability. All critical components—including the penetrator body, cover, nut, and washers—must be manufactured from QQ-N-286 or QQ-N-281 material with full quantitative chemical and mechanical certification, and each lot must be traceable via unique heat or lot numbers permanently marked on the part or an attached durable tag. Welding procedures and qualifications must be submitted for pre-approval prior to any production or repair welding, and all welds must conform to S9074-AQ-GIB-010/248 or 0900-LP-001-7000. Material certifications must be submitted electronically via WAWF to Portsmouth Naval Shipyard (N50286) for review and acceptance prior to shipment, with no material permitted to leave the contractor’s facility without formal acceptance. The contractor is required to maintain a documented quality system compliant with ISO-9001 and ISO-10012 or MIL-I-45208 and MIL-STD-45662, subject to government source inspection by DCMA. First Article Testing of one unit must be conducted at Portsmouth Naval Shipyard under government supervision, and all non-destructive and destructive tests, including ultrasonic inspection, dye penetrant testing, and hardness verification, must be performed per specified standards and documented with full traceability to the tested component. Electronic signatures on certifications are permitted but must be controlled, uniquely attributed, and tamper-evident. No molybdenum disulfide lubricants are allowed; only A-A-59004 anti-galling compound may be used on threads. The contract mandates 100% inspection of certification data and traceability markings, zero-defect acceptance criteria, and full compliance with Buy American and Small Business Subcontracting requirements. Delivery of all materials is due no later than 365 days after contract award, with certification data for weld procedures and material testing due 20 days prior to each shipment. This solicitation is issued under Emergency Acquisition Flexibilities and carries a “DO”
Navsup Weapon Systems Support Mech

POSTED

about 21 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 336612
New
Federal
UNION ASSEMBLYThis contract governs the supply of a specialized 0.500 IPS Socketweld Union Assembly designated as SPECIAL EMPHASIS material (Level I/SUBSAFE), critical to shipboard systems where failure could result in catastrophic consequences including loss of life or vessel. The material must strictly conform to Drawing 845-2445110 and referenced specifications including QQ-N-281, MIL-C-15726, and MIL-C-24679, with mandatory quantitative chemical and mechanical certification for specific components. All items require full traceability from raw material through final assembly, with unique heat-lot markings permanently applied and verifiable against certified test reports. Certification documentation must be submitted via WAWF to Portsmouth Naval Shipyard under DODAAC N50286, with inspection and acceptance handled by N39040, and shipments are prohibited until formal acceptance is received. Welding, brazing, and non-destructive testing procedures must be pre-approved, with detailed qualification data submitted electronically, and filler metals require certificates verifying composition and compliance. The contractor must maintain an ISO-9001 compliant quality system with ISO-10012 and ISO/IEC 17025 calibration controls, subject to government quality assurance at source, including unannounced audits and inspections by DCMA. All subcontractors are bound by the same stringent requirements, and material handling, storage, and transport must prevent commingling, contamination, or loss of traceability. Mercury and molybdenum disulfide are prohibited, while anti-galling compound A-A-59004 is mandated for threads. Final acceptance requires 100% verification of traceability, certifications, and test results, with zero-tolerance defects for lot acceptance. The contract is issued under Emergency Acquisition Flexibilities and is a DO-rated order under DPAS, prioritized for national defense use. All waivers, deviations, and engineering changes require explicit Government approval, and full compliance with NAVSEA and Navy quality directives is mandatory. The delivery window is capped at 365 days post-contract effective date, with certification data submissions due at least 20 days before each delivery.
Navsup Weapon Systems Support Mech

POSTED

about 21 hours ago

DEADLINE

in 23 days
View Details
NAICS: 336612
New
DIBBS
MODIFICATION KIT, MAThis contract pertains to a Modification Kit for Marine Hardware and Hull Items, identified by NSN 2040-01-676-4716 and part number 43173-001, with a requirement for three units to be delivered under solicitation SPE7M4-26-T-252J. The kit must comply with stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, and is subject to Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment. Mercury and mercury-containing compounds are strictly prohibited unless explicitly exempted for functional uses in batteries, fluorescent lights, instrument sensors, weapon systems, or specified chemical reagents, with portable mercury-containing devices requiring shock-proof construction and secondary containment as per NAVSEA 5100-003D. The item is designated as a Critical Application Item and must adhere to MIL-STD-2073-1E packaging requirements for kits, including preservation and packaging methods per Appendix D, with marking in accordance with MIL-STD-129 and palletization per DLA Packaging Requirements. Delivery is FOB Origin with a 248-day lead time and no variance allowed in quantity, with inspection and acceptance occurring at the destination. The delivery point is the DLA Distribution facility in New Cumberland, Pennsylvania, with a required ship date of March 29, 2027. The contract includes specific preservation, packaging, and handling instructions, and all materials must be furnished without government identification if rejected. The purchasing organization represents the Department of Defense, Fluid Handling Division, with primary point of contact provided for inquiries.
FLUID HANDLING DIVISION

POSTED

1 day ago

DEADLINE

in 3 days
View Details
NAICS: 336612
New
DIBBS
COVER, BOATThis contract covers the procurement of six boat covers identified by NSN 2040-01-651-3137 and part number 9000074 from WING INFLATABLES INC, with a total contract value of $36.00 at $6.00 per unit. Delivery is required within 168 days to the DLA Distribution facility in New Cumberland, Pennsylvania, FOB origin, with no quantity variance permitted. The supplies must be packaged in strict accordance with MIL-STD-2073-1E and MIL-STD-129, using specific packaging methods and materials as detailed, with no special marking required. All packaging and handling must comply with DLA’s master packaging requirements, and the items must be labeled and palletized appropriately for military logistics. The shipment must arrive no later than January 19, 2027, with an original required delivery date of March 8, 2027. The contract mandates strict adherence to environmental and safety standards, prohibiting the intentional use of mercury or mercury-containing compounds in the product unless specifically exempted for functional components like batteries, sensors, or weapon systems, and even then, portable devices must include secondary containment as per NAVSEA 5100-003D. The use of any Class I ozone-depleting substances in manufacturing or processing is strictly forbidden without explicit written approval from the Contracting Officer, and this restriction overrides all other specifications except those applicable to commercial items as defined by FAR 11.001. Inspection and acceptance occur at the destination, and transportation details are governed by DLA procedural notes C19 and C20. All technical and quality requirements referenced are drawn from the DLA Master List, and the solicitation issued under SPE7M4-26-T-281A, with the offer due by August 3, 2026, and awarded to the Fluid Handling Division of the Department of Defense.
FLUID HANDLING DIVISION

POSTED

1 day ago

DEADLINE

in 9 days
View Details

More opportunities from Department Of The Interior → Ser WEST(52000)

Same awarding agency