Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

J--HAUL OUT/REFURBISH CAPTAIN GEORGE VESSEL

Awarded
140P5226Q0011Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The National Park Service is awarding a contract for the cyclic haul-out and comprehensive refurbishment of the 54-foot SeaArk Model 4614-B transport vessel, identified by VIN SAMA1820D707 and named M/V CAPTAIN GEORGE, previously serviced in 2023. The work, to be performed at the contractor’s marine service center, must be completed within 45 days of the Notice to Proceed and includes hull and deck painting, replacement of critical components such as engine turbos, John Deere 6081 diesel engine stuffing boxes (serial number 208690), anodes, seals, rub rail, and seating, as well as installation of new multifunctional navigation displays and recertification of life raft and fire suppression systems. All work must restore the vessel to its original condition using materials compatible with existing systems, with replaced government-furnished items like props and anodes required to be returned. The contractor is responsible for delivery and pickup if the service center lies beyond 25 miles of 3500 Park Road, Ocean Springs, MS, otherwise the government will handle transport. The contract does not specify a value, pricing structure, or funding codes, and no formal contract type such as FFP or IDIQ is indicated. Work must comply with OSHA regulations, manufacturer guidelines, and industry standards without citation to specific technical codes. Inspection and acceptance are expected at the contractor’s facility, with shared responsibilities between the contractor for quality execution and the government for oversight. Key point of contact is Evans Andre Ward of the Department of the Interior’s WEST MABO office in Tupelo, MS, with support from Gulf Islands National Seashore personnel Clint Procell and Ernest J. Echoles. The solicitation requires line-item bidding but lacks detailed evaluation criteria, formal FAR clauses, packaging specifications, or submission instructions, and no socioeconomic status, UEI, or CAGE codes are provided. No contract options, security clearances, or organizational conflict of interest clauses are stipulated.

General Info

Refurbish 54-foot M/V CAPTAIN GEORGE vessel with engine, hull, and systems upgrades within 45 days at contractor’s facility.

Agency

Department Of The Interior → Ser WEST(52000)View Agency

Contract Value

$57,926.54

NAICS

336612 - Boat BuildingView NAICS

Place of Performance

MS

Set-Aside

NONE

Awardee

SIGNET MARITIME CORPORATIONView Profile

Award Issued Date

Documents

(1)

SOW Captain George Haul Out 2026

DOCXsow

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseAwarded
Posted

Presolicitation

Awarded

Contract was awarded

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of The Interior → Ser WEST(52000)
Contacts1 person available
OfficeTUPELO, MS, 38804, USA
Organization / Agency
Department Of The Interior → Ser WEST(52000)
View Agency Profile
Office AddressTUPELO, MS, 38804, USA

Full Description

Show more
CYCLIC HAUL-OUT/REFURBISH M/V CAPTAIN GEORGE; VIN SAMA1820D707. PREVIOUS HAUL-OUT COMPLETED IN 2023.
54FT SEAARK MDL 4614-B TRANSPORTER OWNED AND OPERATED BY THE NATIONAL PARK SERVICE. MARINE VESSEL IS EQUIPPED WITH TWO (2) JOHN DEERE 6 CYLINDER DIESEL ENGINES MODEL 6081

Similar Contracts

Same NAICS industry code

NAICS: 336612
New
Federal
CONNECTOR,THRU-HULLThis contract pertains to the procurement of a thru-hull connector assembly designated as SPECIAL EMPHASIS MATERIAL (Level I), critical to the safe operation of shipboard systems where failure could result in catastrophic loss of life, vessel, or mission. The item must comply with specification CPG 1025 and associated drawings, with strict requirements for material composition, welding, inspections, and traceability. All critical components—including the penetrator body, cover, nut, and washers—must be manufactured from QQ-N-286 or QQ-N-281 material with full quantitative chemical and mechanical certification, and each lot must be traceable via unique heat or lot numbers permanently marked on the part or an attached durable tag. Welding procedures and qualifications must be submitted for pre-approval prior to any production or repair welding, and all welds must conform to S9074-AQ-GIB-010/248 or 0900-LP-001-7000. Material certifications must be submitted electronically via WAWF to Portsmouth Naval Shipyard (N50286) for review and acceptance prior to shipment, with no material permitted to leave the contractor’s facility without formal acceptance. The contractor is required to maintain a documented quality system compliant with ISO-9001 and ISO-10012 or MIL-I-45208 and MIL-STD-45662, subject to government source inspection by DCMA. First Article Testing of one unit must be conducted at Portsmouth Naval Shipyard under government supervision, and all non-destructive and destructive tests, including ultrasonic inspection, dye penetrant testing, and hardness verification, must be performed per specified standards and documented with full traceability to the tested component. Electronic signatures on certifications are permitted but must be controlled, uniquely attributed, and tamper-evident. No molybdenum disulfide lubricants are allowed; only A-A-59004 anti-galling compound may be used on threads. The contract mandates 100% inspection of certification data and traceability markings, zero-defect acceptance criteria, and full compliance with Buy American and Small Business Subcontracting requirements. Delivery of all materials is due no later than 365 days after contract award, with certification data for weld procedures and material testing due 20 days prior to each shipment. This solicitation is issued under Emergency Acquisition Flexibilities and carries a “DO”
Navsup Weapon Systems Support Mech

POSTED

2 days ago

DEADLINE

in 29 days
View Details
NAICS: 336612
New
Federal
UNION ASSEMBLYThis contract governs the supply of a specialized 0.500 IPS Socketweld Union Assembly designated as SPECIAL EMPHASIS material (Level I/SUBSAFE), critical to shipboard systems where failure could result in catastrophic consequences including loss of life or vessel. The material must strictly conform to Drawing 845-2445110 and referenced specifications including QQ-N-281, MIL-C-15726, and MIL-C-24679, with mandatory quantitative chemical and mechanical certification for specific components. All items require full traceability from raw material through final assembly, with unique heat-lot markings permanently applied and verifiable against certified test reports. Certification documentation must be submitted via WAWF to Portsmouth Naval Shipyard under DODAAC N50286, with inspection and acceptance handled by N39040, and shipments are prohibited until formal acceptance is received. Welding, brazing, and non-destructive testing procedures must be pre-approved, with detailed qualification data submitted electronically, and filler metals require certificates verifying composition and compliance. The contractor must maintain an ISO-9001 compliant quality system with ISO-10012 and ISO/IEC 17025 calibration controls, subject to government quality assurance at source, including unannounced audits and inspections by DCMA. All subcontractors are bound by the same stringent requirements, and material handling, storage, and transport must prevent commingling, contamination, or loss of traceability. Mercury and molybdenum disulfide are prohibited, while anti-galling compound A-A-59004 is mandated for threads. Final acceptance requires 100% verification of traceability, certifications, and test results, with zero-tolerance defects for lot acceptance. The contract is issued under Emergency Acquisition Flexibilities and is a DO-rated order under DPAS, prioritized for national defense use. All waivers, deviations, and engineering changes require explicit Government approval, and full compliance with NAVSEA and Navy quality directives is mandatory. The delivery window is capped at 365 days post-contract effective date, with certification data submissions due at least 20 days before each delivery.
Navsup Weapon Systems Support Mech

POSTED

2 days ago

DEADLINE

in 22 days
View Details
NAICS: 336612
New
SLED
Pedal Boat Manufacturing – Animal-Themed Recreational WatercraftThe contract involves the manufacture of five-person animal-themed pedal boats designed for recreational use on water, with specifications requiring marine-grade fiberglass construction, UV-resistant gel coat finishes, non-skid surfaces for safety, and self-draining hulls to ensure durability and ease of maintenance. Each vessel must be equipped with either a foot-pedal or hand-crank propulsion system to accommodate varying user preferences and accessibility needs, blending functionality with playful, thematic designs. The work falls under NAICS code 336612, indicating classification within the manufacturing of other recreational vehicles, and is structured as a subcontract opportunity issued by the City of Raleigh under the North Carolina state framework. The solicitation was posted on July 24, 2026, with a firm deadline for responses on August 20, 2026, at 7:00 PM Eastern Time. While no set-aside provisions or specific agency contact details are provided, the project underscores a municipal initiative to enhance public recreational offerings with innovative, durable, and user-friendly watercraft. The absence of a defined place of performance suggests flexibility in manufacturing location, though adherence to the technical specifications and delivery standards will be critical for compliance. Interested parties must ensure their proposals meet all engineering, safety, and aesthetic requirements outlined in the solicitation to be considered for award.
City of Raleigh

POSTED

3 days ago

DEADLINE

in 25 days
View Details

More opportunities from Department Of The Interior → Ser WEST(52000)

Same awarding agency