This Government Contract opportunity from Department Of The Interior was posted on April 29, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Marine Hull Steel Repair and Ultrasonic Gauging

Closed

Federal

Submission Closed05/22/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 336612

New

Federal

MATERIAL,RADAR ABSOThis contract solicits a firm-fixed-price quote for the manufacture and delivery of Radar Absorbent Material (RAM) Sheets, Type CIIIC Triple Band, intended for use on Navy submarines. The procurement includes 50 sheets split between two delivery sites: 25 to DLA Distribution Norfolk, Virginia, and 25 to DLA Distribution San Diego, California. The material is classified as confidential and subject to stringent security and handling requirements, including compliance with a DD254 security classification specification. The contract mandates strict adherence to NAVSEA drawings and documentation for manufacturing, testing, marking, and packaging, with detailed quality control and first article testing protocols prior to production acceptance. The contractor must permanently mark each sheet with specific identification data and maintain a comprehensive quality system compliant with MIL-I-45208 or ISO 9001 standards. The contract emphasizes rigorous inspection and testing procedures, including both qualitative and classified quantitative electrical testing, although only unclassified qualitative results are to be submitted through standard government electronic workflows. The supplier must collaborate closely with Naval Surface Warfare Center Philadelphia Division, the acceptance authority, and Naval Undersea Warfare Center Newport for classified data approval and technical disposition. Configuration management and change control must comply with MIL-STD-973, and the RAM material must be mercury-free to avoid contamination risks critical to submarine systems. Packaging is governed by military standards (MIL-STD-2073), and early or partial deliveries are encouraged. Award will be bilateral and contingent upon the contractor’s formal acceptance of contract terms. The solicitation closes on June 8, 2026, and is managed by the Department of Defense's Navsup Weapon Systems Support Mech office located in Mechanicsburg, PA.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Supply of 21" Flush-Mounted Quick-Acting Steel Scuttle (CLIN 0001)The contract involves the supply and delivery of a commercial off-the-shelf 21-inch clear opening, flush-mounted, 3-dog quick-acting steel scuttle designed specifically for use on the Coast Guard Cutter MOHAWK. The scuttle must adhere strictly to the exact specifications provided and is to be shipped FOB destination to Key West, Florida. This procurement is managed by the SFLC Procurement Branch 1 under the Department of Homeland Security. This opportunity is a total small business set-aside under the SBA, with the NAICS code 336612, indicating it pertains to boat building manufacturing. The solicitation was posted on June 15, 2026, with a response deadline of June 25, 2026, at 2:00 PM. The contract type is a subcontract, and performance is expected at the location in Key West, FL, zip code 33040.

Sflc Procurement Branch 1(00080)

POSTED

DEADLINE

Supply of 24"x24" Raised Steel Watertight Hatch (CLIN 0002)This contract involves the supply and delivery of a new commercial off-the-shelf (COTS) 24"x24"x12" coaming raised steel watertight hatch intended for deck access on the Coast Guard Cutter MOHAWK. The hatch must be watertight and comply with specified technical requirements to ensure proper functionality and safety. Delivery is required FOB destination to Key West, Florida, specifically to the performance location with the zip code 33040. The procurement is issued by the Department of Homeland Security through the SFLC Procurement Branch 1 and designated as a subcontract opportunity. It is set aside entirely for small businesses under the SBA Total Small Business Set-Aside program, following FAR 19.5 guidelines. The solicitation was posted on June 15, 2026, with a response deadline of June 25, 2026, at 2:00 PM. The NAICS code associated with this contract is 336612, which relates to boat building and manufacturing activities consistent with this type of equipment supply.

Sflc Procurement Branch 1(00080)

POSTED

DEADLINE

RUDDER AND STERN FRAME - USNS MEDGAR EVERSThis contract involves the procurement of examination services for the rudder and stern frame of the USNS Medgar Evers AKE 13, with Kongsberg, the original equipment manufacturer formerly known as Rolls-Royce, providing support. Kongsberg is responsible for key components including the Bow Thruster Propeller Unit, Tunnel, Steering Gear, and Rudder Gland Seal. The contract is being solicited by the Department of Defense through the Mschq Norfolk office, located in Norfolk, Virginia. The solicitation was posted on June 15, 2026, with responses due by June 26, 2026. The contract falls under the NAICS code 336612, which pertains to ship and boat building. There is no set-aside designation for this procurement, indicating no specific preference for small or disadvantaged businesses. Key points of contact include Grant Sivertson (primary) and Cameron Alvey (secondary), both civilian employees reachable via provided contact information. The contract services will be performed in Norfolk, Virginia.

POSTED

DEADLINE

Special Notice of Intent to Award Brand Name MakoThe Department of Commerce's NOAA Marine Operations Center intends to award a sole source contract to Wing Inflatable, Inc. for the replacement and installation of foam-filled sponsons on two small boats aboard the NOAA Ship Nancy Foster, homeported in Charleston, SC. The boats involved include the NF-2, a 17ft Katanacraft Extreme RIB built in 2016, and the NF-3, a 17ft Northwind Marine Custom RIB built in 2011, both featuring aluminum hulls and Yamaha F90XTR outboard engines. Due to the aging condition of the sponsons, a full replacement is needed, covering the procurement of new sponsons, associated materials, and installation services. The procurement start date for materials is requested to begin one day after award, with delivery required no later than November 30, 2026. Installation is scheduled to coincide with the ship’s winter alongside period, beginning November 30, 2026, and must be completed by January 31, 2027. While this notice is not a solicitation for competitive quotes, other firms that believe they can meet the requirements may submit capability statements by June 29, 2026, for the government to consider if it decides to open the procurement competitively. All contractors must be registered in the System for Award Management (SAM) to be eligible for award, and all responses must be submitted in writing via email to the designated NOAA contact. This action is being conducted under the authority of FAR 6.103, permitting non-competitive procurement.

Department Of Commerce Noaa

POSTED

4 days ago

DEADLINE

in 13 days

AI Contract Overview

The contract involves inspecting, repairing, or renewing the hull steel components of a historic riveted steamship using ultrasonic thickness testing to assess the condition of the steel. The work also includes cutting, shaping, and riveting lapped steel plates to restore the structural integrity of the vessel’s hull. This project requires specialized skills in ultrasonic gauging and traditional riveting techniques appropriate for maintaining the historic character of the ship. Issued as a subcontract by the Department of the Interior, the opportunity is aligned with NAICS code 336612, related to ship building and repair. The solicitation was posted on April 29, 2026, with a response deadline of May 22, 2026. Specific location details for the performance of the work and point of contact information are not provided, indicating that interested subcontractors should refer to the official government website for further details. The contract emphasizes maintaining historic craftsmanship alongside contemporary inspection technology to ensure both preservation and structural safety.

General Info

Inspect, repair, and renew historic steamship hull using ultrasonic testing and traditional riveting techniques.

Agency

Department Of The Interior → Pwr Sf/sea MABO(85000)

NAICS

336612 - Boat Building View NAICS

Place of Performance

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed

PostedApr 29

subcontract

Response DeadlineMay 22

Deadline has passed

Submission Closed

05/22/2026, 07:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of The Interior → Pwr Sf/sea MABO(85000)

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of The Interior → Pwr Sf/sea MABO(85000)

Office AddressN/A

ContactsNo contact information available

Full Description

Inspect, repair, or renew hull steel components using ultrasonic thickness testing; perform cutting, shaping, and riveting of lapped steel plates on a historic riveted steamship.