Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Vessel Haul-Out and Dry-Dock Services

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the haul-out of a 50-foot Utility Landing Craft using either a travel lift or dry-dock system at a facility located within 25 miles of Ocean Springs, Mississippi. The work is classified as a subcontract under NAICS code 336611, which pertains to shipbuilding and repairing services. The solicitation was posted on April 29, 2026, and is managed by the Department of the Interior through its Ser WEST(52000) organization, indicating this effort supports federal maritime operations. The performance location is constrained to a specific geographic radius to ensure logistical efficiency and timely execution, with no details provided regarding set-asides or specific contract award mechanisms. All services must be performed at a capable shore-based facility equipped to safely handle vessels of this size and type.

General Info

Haul-out of 50-foot boat near Ocean Springs, MS, under federal maritime contract.

Agency

Department Of The Interior → Ser WEST(52000)View Agency

NAICS

336611 - Ship Building and RepairingView NAICS

Place of Performance

MS

Set-Aside

NONE

Documents

This scope was carved out of 140P5226Q0011.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

J--HAUL OUT/REFURBISH CAPTAIN GEORGE VESSEL

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedApr 29

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of The Interior → Ser WEST(52000)

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of The Interior → Ser WEST(52000)

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Haul out the 50’ Utility Landing Craft using a travel lift or dry-dock system at a facility within 25 miles of Ocean Springs, MS.

Similar Contracts

Same NAICS industry code

Solicitation # SPE7M1-26-T-330L

This contract is a solicitation for the procurement of one marine window, identified by NSN 2090-01-542-2871 and associated with Cornell-Carr Co., Inc. part numbers CC-10209 PC 3 and CC-811. The order is managed under solicitation number SPE7M1-26-T-330L with a required delivery date of March 27, 2025, and a delivery timeframe of five days after order. Shipping is designated as FOB Destination, with the final delivery point located at the SRF and JRMC Yokosuka Naval Base in Japan. The agreement includes strict technical and environmental compliance requirements, specifically prohibiting the intentional addition of mercury or mercury-containing compounds and the use of Class I ozone-depleting substances without written approval. Compliance with CMMC Level 2 self-assessment and DLA packaging requirements is mandatory. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, including specific fragile markings. The contract also incorporates various DLA master lists of technical and quality requirements.

MARITIME SUPPLY CHAIN

POSTED

about 9 hours ago

DEADLINE

TRANSMITTER, PROPELLER

Solicitation # SPE4A6-26-T-27NB

This contract is for the procurement of one propeller revolution transmitter, identified by NSN 6320010966649 and part number 2P3T from Dynalec Corporation. The item is designated as a critical application item and must be delivered to DLA Distribution Jacksonville. The delivery timeline is set for 171 days after order, with a required delivery date of December 1, 2027. The agreement mandates strict adherence to DLA packaging and marking requirements, specifically MIL-STD-129 and MIL-STD-2073-1E. Quality assurance will be managed through sampling methods aligned with MIL-STD-1916 or ASQ H1331, with inspection and acceptance occurring at the destination. Additionally, the contract prohibits the intentional use of mercury or mercury-containing compounds in the hardware, preservation, or packaging, except where functionally required and specified by NAVSEA.

ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

BLOCKING MATERIAL KIT,

Solicitation # SPE2DS-26-T-414N

This contract is a solicitation for the procurement of ten blocking material kits for optical fabrication, specifically for the Gerber Step-One system. The required items are identified by part number 164342 and NSN 6540-01-451-8033, consisting of adhesive slabs in four gallon cans. The order is to be sourced from Coburn, and because the material is regulated by the FDA, the contracting official must coordinate with a product specialist for confirmation. The agreement mandates strict adherence to DLA packaging and medical marking standards, specifically Medical Marking Standard No. 1. Delivery is required within 84 days after the order, with the FOB and inspection points set at the destination. The contract also incorporates specific technical and quality requirements from the DLA master list and requires the removal of government identification from any non-accepted supplies.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 9 hours ago

DEADLINE

LUMBER, NON-WOOD, DIMENS

Solicitation # SPE8E6-26-T-4557

Contract SPE8E6-26-T-4557 is a solicitation issued by the Defense Logistics Agency for the procurement of 50 units of non-wood dimensional lumber, specifically identified by NSN 5675-01-448-1645. The material is a mission brown plastic lumber composed of high and low density polyethylene, measuring 4 inches by 4 inches by 10 feet with a smooth working surface. This material is intended for use in decking, docks, fencing, benches, and waste containers. The contract specifies a delivery timeframe of 20 days after order and designates the shipping destination as Fort Polk, Louisiana. Packaging must comply with ASTM D3951 and DLA packaging requirements, with marking and labeling adhering to MIL-STD-129. The agreement is FOB Origin with inspection and acceptance occurring at the destination. All technical and quality requirements are governed by the DLA Master List, and the procurement is managed under NAICS code 336611.

Defense Logistics Agency

POSTED

about 9 hours ago

DEADLINE

USS SHOUP (DDG-86) 7C1 SRA BUNDLE-2

Solicitation # N6264926RA060

This Firm-Fixed-Price contract is for the ship repair, maintenance, and overhaul of the USS SHOUP (DDG-86) as part of the Surface Incremental Availability (SIA) 7C1 Bundle 2. The work is to be performed at the Commander, Fleet Activities Yokosuka (CFAY) Naval Base in Japan from March 22, 2027, to August 31, 2027. The scope of work is defined by fifteen Task Group Instructions (TGIs) and focuses heavily on the cleaning, assessment, repair, and preservation of various onboard tanks, including potable water and lubricating oil sump tanks. Additional requirements include structural weld repairs of corrosion pits on longitudinal girders and horizontal stiffeners, the replacement of insulation and lagging on Gas Turbine Module exhaust ducts, and the machining of radome mounting surfaces. The contract is restricted to sources authorized to operate in Japan that possess an active Master Ship Repair Agreement (MSRA) or Agreement for Boat Repair (ABR). Award is based on the Lowest Price Technically Acceptable (LPTA) process, where offerors must be rated as acceptable in technical capability and past performance. The contractor is responsible for all labor, subcontractor management, quality assurance, and safety management. To manage anticipated growth work and improve Condition Found Report turnaround times, a Growth CLIN will be implemented using a Growth Management Request Level of Effort to Completion process. All invoicing and payment requests must be processed electronically through the Wide Area WorkFlow (WAWF) system.

Navsup Flt Logistics Ctr Yokosuka

POSTED

about 14 hours ago

DEADLINE

MK 41 VERTICAL LAUNCH SYSTEM (VLS) OVERHAUL

Solicitation # N4002726R0005

The Southeast Regional Maintenance Center is issuing a presolicitation notice for the overhaul of MK 41 Vertical Launch System cell hatches and uptake hatches. The government intends to award a single Indefinite Delivery, Indefinite Quantity contract with a Firm Fixed Price structure and a five-year ordering period. The formal solicitation is expected to be posted to SAM.gov in late August 2026, with a response deadline set for September 30, 2026. The place of performance for this requirement is located in Jacksonville, Florida. To qualify for this contract, potential offerors must demonstrate specific technical expertise and adherence to NAVSEA Instruction 8394.2G regarding MK 41 VLS Safety and Design Precepts. Required capabilities include the ability to provide certified Systems Maintenance Technicians and personnel with Corrosion Control Certifications, such as NACE or SSPC/NBPI training. Additionally, applicants must prove they have prior experience specifically involving the overhaul of MK 41 VLS hatches.

Southeast Regional Maintenance Center

POSTED

about 14 hours ago

DEADLINE

in about 2 months

Cleaning of Sanitation Tanks

Solicitation # N4215826Q0035

The Norfolk Naval Shipyard Command (NNSY) is soliciting firm-fixed-price commercial services for the cleaning and disinfection of three Collection, Holding, and Transfer (CHT) sanitation tanks, including Sanitary Tank One, Sanitary Tank 3, and the Auxiliary Control Room Holding Tank. The scope of work requires the contractor to perform three flushes of these tanks and ensure the proper containment and disposal of all waste effluents at approved facilities. Performance must adhere to strict cleanliness standards, including SSPC-SP-1 and SSPC-SP10, with validation via visual water break tests and chloride swipes. The project is a total small business set-aside, specifically designated for Service-Disabled Veteran-Owned Small Businesses (SDVOSB) 8(a). The solicitation process includes a technical evaluation and a price submission, with the award granted to the technically acceptable offeror providing the lowest aggregate price. Proposals must include a technical capability statement, with both redacted and unredacted versions, and a detailed cost breakdown on company letterhead. Due to the nature of the work, contractors must comply with rigorous security and safety protocols, including the prohibition of portable electronic devices on submarines and the completion of comprehensive security training. All hazardous waste must be stored in UN Performance Oriented Packaging with watertight lids. Invoicing and payment will be processed electronically through the Wide Area WorkFlow (WAWF) system. The solicitation close date is September 17, 2026, with a specific performance period for Round 2 scheduled from April 5, 2027, to May 14, 2027.

Norfolk Naval Shipyard Gf

POSTED

about 14 hours ago

DEADLINE

Overhaul - Barrier Boat

Solicitation # N3904026Q5666

Portsmouth Naval Shipyard (PNSY) is soliciting a firm-fixed-price contract for the depot-level overhaul, maintenance, repair, and preservation of one 30-foot Barrier Boat (Hull 30BB0701). The scope of work includes dry-docking, structural hull repairs, fendering, and comprehensive servicing of propulsion, electrical, steering, and auxiliary systems, concluding with mandatory dock and sea trials. All work must be completed within three months of the award and delivery of the vessel to the contractor's facility. Performance will take place at PNSY in Kittery, Maine, and at the contractor's own facility, with some work occurring within a NAVSEA Controlled Industrial Area. This acquisition is a 100% total small business set-aside, specifically open to HUBZone and service-disabled veteran-owned small businesses. To access restricted technical drawings, firms must be registered in the Joint Certification Program (JCP) and provide an approved DD Form 2345. The government will award the contract based on best value, evaluating technical approach and past performance over the last three years. Contractors are required to adhere to strict operations security (OPSEC) and cybersecurity standards, including DFARS 252.204-7012. Payment will be processed electronically via the Wide Area WorkFlow (WAWF) system.

Portsmouth Naval Shipyard Gf

POSTED

about 14 hours ago

DEADLINE

USNS POINT LOMA (T-EPF 15) Mid-Term Availability

Solicitation # N3220526R6128

The Department of Defense, through Mschq Norfolk, is soliciting proposals for the Mid-Term Availability of the USNS POINT LOMA (T-EPF 15) under solicitation number N3220526R6128. The project involves preparing for and accomplishing work as specified in the work item package, with an anticipated period of performance from April 5, 2027, to June 19, 2027. Due to national security and operational considerations, the work must be performed at a contractor facility located on the East Coast. This opportunity is designated as a total small business set-aside under NAICS code 336611. The solicitation is expected to be released around September 3, 2026, via the Procurement Integrated Enterprise Environment Solicitation Module. To access the work item package and government furnished technical data, interested parties must execute a non-disclosure agreement. This agreement mandates strict adherence to DoDI 5230.24 and DoD-M 5200.01-V4 standards for controlled unclassified information. The contractor is responsible for establishing organizational controls to prevent unauthorized disclosure, ensuring all subcontractors sign similar agreements, and certifying the return or destruction of technical data upon contract completion or award to another entity.

POSTED

about 14 hours ago

DEADLINE

in about 1 month

3553 CEMDC CELRE Procurement of Stoplog Barges - W912BU26BA034

Solicitation # W912BU26BA034

Solicitation W912BU26BA034 is an Invitation for Bid (IFB) issued by the U.S. Army Corps of Engineers, Philadelphia District, for the design, fabrication, testing, and delivery of two new welded steel stop log barges, with an option for a third. These vessels, designated as Hull 916 for Poe Lock and Hull 925 for MacArthur Lock, are intended for the storage and transport of stop logs and maintenance support for the Detroit District’s St. Mary’s River Project. The project is a total small business set-aside under NAICS code 336611. The contract is a firm fixed-price acquisition requiring the contractor to deliver the vessels afloat and ready for service at the St. Marys Falls Canal in Sault Saint Marie, Michigan, within 625 calendar days of award. The contractor must adhere to ABS Class and USCG documentation standards, utilizing a phased approach that includes planning, construction, and delivery. Key requirements include the provision of bid, payment, and performance bonds, with the performance bond set at 20 percent of the original contract price. Liquidated damages for delivery delays are established at 1,569.67 dollars per calendar day. Bids must be submitted electronically via the Procurement Integrated Enterprise Environment (PIEE) by 1400 EDT on September 25, 2026. Award will be based on price, with the government evaluating the total price for the basic requirement and all options.

W2SD Endist Philadelphia

POSTED

about 14 hours ago

DEADLINE

USNS YUMA (T-EPF-8) RCS Maintenance

Solicitation # N3220526Q0092

Solicitation N3220526Q0092, issued by MSCQ Norfolk, is a request for quotes for the procurement of Ride Control System (RCS) maintenance parts and technical assistance for the USNS YUMA (T-EPF-8). The requirement focuses on proprietary brand-name components from Austal and AUVALVE, including lower interceptor bearings, skeg bearings, rod ends, seal kits, and pilot operated check valves. Due to the proprietary nature of the RCS parts and software, Austal USA is identified as the original equipment manufacturer and required source. The government intends to award the contract to the lowest priced technically acceptable quoter, with a required delivery date of March 1, 2027. Performance is designated as FOB Destination to the MSC Warehouse in Norfolk, Virginia, requiring 48-hour advance notification for delivery. The contractor must adhere to strict packaging and marking standards, including MIL-STD 129R and ISPM 15 for wood crating, and utilize Wide Area WorkFlow (WAWF) for all invoicing and payment requests. The acquisition is unrestricted but includes specific set-aside considerations for small businesses and service-disabled veteran-owned small businesses. Key regulatory compliance includes the Buy American Act, restrictions on ball and roller bearings, and the identification of critical safety items.

POSTED

about 14 hours ago

DEADLINE

in about 17 hours

Solicitation # 70Z08526Q49024B00

The United States Coast Guard Surface Forces Logistics Center is soliciting quotes for the procurement of three Caterpillar Defense rotary pumps (NSN 4320 01-413-3244). This requirement is structured as an exchange through the Caterpillar core exchange program, with the Coast Guard providing three defective cores for turn-in. The acquisition is a small business set-aside and will be awarded as a purchase order based on technical acceptability, price fairness, and vendor responsibility. A critical requirement for responsiveness is the provision of an OEM authorization letter confirming the vendor is an authorized distributor or reseller. Technical compliance requires adherence to strict packaging and marking standards, including MIL-STD-129R and MIL-STD-2073-1 E Method 10, to ensure items are protected against corrosion for at least two years of warehouse storage. Shipping must be FOB Destination to Baltimore, Maryland, with deliveries scheduled Monday through Friday between 8am and 1pm. Pricing must be all-inclusive, as quotes with separate shipping line items will be rejected. The contractor must provide a warranty against defects for 365 days after installation for up to two years after delivery. All invoicing must be processed as non-PO through the IPP portal, and vendors must maintain active SAM.gov registration to be eligible for award.

Sflc Procurement Branch 2(00085)

POSTED

about 14 hours ago

DEADLINE

More opportunities from Department Of The Interior → Ser WEST(52000)

Same awarding agency

Marine Safety and Quality Assurance ComplianceThe contract titled Marine Safety and Quality Assurance Compliance requires the development and implementation of a comprehensive safety plan aligned with OSHA regulations and all applicable manufacturer specifications for marine repair operations. The work involves ensuring that all repair activities meet rigorous safety standards to protect personnel and equipment, with full compliance enforced throughout every phase of the project. This subcontract falls under NAICS code 541690, indicating it is part of other scientific and technical consulting services, and is managed by the Department of the Interior through Ser WEST. The contract was posted on April 29, 2026, and performance is expected to occur within the scope of marine repair environments, though specific geographic details are not provided. The obligation centers on maintaining quality assurance protocols that integrate regulatory adherence with operational excellence, placing emphasis on proactive safety measures and documentation to support audits and site inspections.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

Marine Seat Replacement and Interior RefurbishmentThe contract involves the replacement of vessel seats and the restoration of interior surfaces using marine-grade, corrosion-resistant materials that align with the original design specifications. Work must be executed to ensure durability in harsh maritime environments while maintaining aesthetic and functional consistency with the vessel’s existing interior. The project is classified as a subcontract under the NAICS code 337127, which pertains to boat building and repair, indicating specialized shipyard or marine fabrication expertise is required. Performance will occur under the purview of the Department of the Interior through its Ser WEST(52000) office, though specific location details for the place of performance are not provided. The solicitation was posted on April 29, 2026, and no set-aside provisions or point of contact information are included, suggesting the award process may be streamlined or internally managed.

Institutional Furniture Manufacturing

POSTED

DEADLINE

Multifunctional Display (MFD) and Electronics UpgradeThe contract involves replacing multifunctional displays used for navigation and engine monitoring aboard vessels, with a focus on seamless integration into the existing electrical systems. This upgrade aims to enhance situational awareness and operational efficiency by modernizing the onboard electronics infrastructure, ensuring compatibility and reliability across all critical vessel functions. The scope includes procurement, installation, and systems integration of new MFDs designed to meet current maritime standards and performance requirements. The contract is classified as a subcontract under NAICS code 334510, which pertains to the manufacturing of navigational, measuring, electromedical, and control instruments. It is issued by the Department of the Interior through its Ser WEST office, with the solicitation posted on April 29, 2026. The place of performance and specific location details are not provided, but the work is expected to be carried out on vessels operated under the agency's jurisdiction. There is no set-aside designation specified, and no point of contact information is included in the posting.

Electromedical and Electrotherapeutic Apparatus Manufacturing

POSTED

DEADLINE

Dripless Stuffing Box and Engine Hatch Seal ReplacementThe contract calls for the replacement of dripless stuffing boxes and engine hatch seals to eliminate water ingress risks on marine vessels, with specific emphasis on installing Tide Marine systems identified by Serial Number 208690, model HS 3000-3500. This work is critical for maintaining vessel integrity and operational safety by preventing leaks that could lead to mechanical failure or hazardous conditions. The task involves removing old, degraded seals and stuffing boxes and ensuring the new components are properly fitted, aligned, and functionally tested to meet marine engineering standards. This subcontract, posted on April 29, 2026, under NAICS code 336612 for Ship and Boat Building and Repair, is administered by the Department of the Interior through its Ser WEST(52000) office. Although no set-aside classification or place of performance details are provided, the work is likely to occur at a designated marine facility or on vessels operated by the agency. The contract seeks qualified vendors capable of handling specialized marine sealing systems, with a focus on precision installation and long-term reliability of the Tide Marine hardware. No point of contact information is included, and further details can be accessed through the provided SAM.gov link.

POSTED

DEADLINE

Marine Engine and Turbocharger ReplacementThe contract involves the replacement of turbochargers and comprehensive maintenance services for John Deere 6081 marine diesel engines, ensuring operational readiness and efficiency of vessel propulsion systems. The work is classified under NAICS code 811111, indicating it falls within the machinery and equipment repair and maintenance sector, and is structured as a subcontract under the Department of the Interior’s Ser WEST(52000) organization. The solicitation was posted on April 29, 2026, with no set-aside designation specified, meaning it is open to all eligible contractors without preference for small businesses or other categories. Performance of the work is not tied to a specific geographic location, as the place of performance details are unspecified, suggesting the task may occur across multiple marine sites under federal jurisdiction. The contract remains active through its official SAM.gov portal, where further details can be accessed by authorized parties.

General Automotive Repair

POSTED

DEADLINE

Hull Anode and Propeller ReplacementThe contract involves the replacement of hull anodes and propellers on vessels operated by the Department of the Interior through its Ser WEST entity. All work must be performed with the installation of government-furnished parts, ensuring full compliance with technical specifications and documentation standards. The contractor is required to properly document each step of the replacement process and return all removed components as part of the deliverables. This subcontract, classified under NAICS code 336612 for ship and boat building and repairing, is posted for work to be carried out in an unspecified location, with no set-aside provisions designated. The posting date indicates the opportunity was made available in April 2026, and the performance location remains undefined in the provided data.

POSTED

DEADLINE

Sandblasting and Non-Skid Urethane Painting (Deck and Superstructure)The contract requires comprehensive sandblasting and repainting of the gate, cargo bay, roof, and deck cabin using non-skid urethane paint to ensure durability and safety in high-traffic or marine environments. The work focuses on the deck and superstructure areas, emphasizing surface preparation through sandblasting followed by the application of a high-performance coating system designed to resist slipping and withstand exposure to the elements. The project is classified under NAICS code 238320, indicating it is a subcontract for specialty trade contractors, specifically related to structural metal and plate work. It is issued by the Department of the Interior through its Ser WEST(52000) organization, with the opportunity posted on April 29, 2026, and available for bidding through the SAM.gov platform. No set-aside information is specified, and the place of performance details remain unlisted, suggesting the work location may be determined upon award.

Painting and Wall Covering Contractors

POSTED

DEADLINE

Bottom Paint and Anti-Fouling Coating ApplicationThe contract outlines the removal of existing bottom paint and the application of new anti-fouling coatings to a vessel hull, ensuring optimal performance and protection against marine growth. This work is classified as a subcontract under NAICS code 336612, which pertains to ship and boat building and repairing, and is associated with the Department of the Interior under the agency name Ser WEST. The task is scheduled to take place following the posting date of April 29, 2026, with no specific location provided for performance, indicating flexibility in where the work may occur. The scope is focused solely on hull preparation and coating, requiring skilled application techniques and adherence to environmental and maritime standards for anti-fouling systems. There is no set-aside type specified, suggesting the opportunity is open to general subcontracting participation without preference for small businesses or other categories. The procurement is accessible via a SAM.gov link, and while no point of contact is listed, interested parties must reference the provided portal for further details and submission requirements.

POSTED

DEADLINE

Security and Personnel Compliance CoordinationThis contract involves the coordination of personnel background checks and compliance activities specifically for contractor staff, even though the work is conducted domestically and does not involve any classified material. The scope centers on ensuring thorough vetting and adherence to security protocols as part of personnel management and regulatory compliance. The contract is categorized under the NAICS code 541611, which relates to administrative management and general management consulting services. The contract is a subcontract issued by the Department of the Interior, under the organization identified as Ser WEST(52000), with the work being performed in Ochopee, Florida, zip code 34141. While there is no specified solicitation number or set-aside designation, the work demands meticulous coordination of security measures surrounding personnel qualifications and oversight. This effort supports maintaining organizational integrity and compliance with federal standards in managing contractor personnel.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Debris Hauling and DisposalThe contract involves the transportation and disposal of demolition debris, including materials such as concrete, wood, metal, and vegetative waste. It emphasizes proper handling and potential recycling of these materials as part of the disposal process. The subcontract is associated with the Department of the Interior and specifically pertains to work performed in Ochopee, with the zip code 34141. Classified under NAICS code 562111, the contract focuses on environmental cleanup services related to debris hauling and disposal. While specific solicitation details such as set-aside information, agency office location, and point of contact are not provided, the contract is publicly posted as of February 20, 2026. This subcontract highlights the importance of responsible waste management practices within the scope of demolition debris removal.

Solid Waste Collection

POSTED

DEADLINE

Tree and Vegetation RemovalThis contract involves the selective removal of designated trees and shrubbery under the oversight of the Contracting Officer Representative (COR), ensuring that protected species and habitats remain unaffected throughout the process. The work is to be performed primarily in Ochopee, Florida, and falls under the NAICS code 115310, which pertains to support activities for forestry. The Department of the Interior, specifically the Ser WEST(52000) agency, is overseeing the subcontract to manage vegetation in a manner that aligns with environmental protection standards. The contract was posted on February 20, 2026, and although it is a subcontract, details such as the solicitation number, type of set-aside, and the point of contact are not provided. The main focus is on careful vegetation management that is compliant with environmental regulations to preserve protected species and habitats within the designated area. This work is critical to maintaining ecological balance while allowing for necessary removal of specific plant life under official direction.

Support Activities for Forestry

POSTED

DEADLINE

Site Grading and EarthworkThe contract focuses on rough and finish grading work aimed at site restoration following demolition activities. The primary objective is to ensure proper drainage and return the terrain to its natural grade, thereby facilitating environmental stability and compliance with site conditions. This subcontract falls under the category of site grading and earthwork, aligning with NAICS code 237990, which addresses specialized construction services related to excavation and land preparation. Issued by the Department of the Interior under the Ser WEST(52000) agency, the work is to be performed in Ochopee, with a specific ZIP code of 34141. Although certain details such as solicitation number, office address, and point of contact are not provided, the contract represents a significant effort to rehabilitate a site after demolition, emphasizing careful grading to meet environmental and structural requirements. The subcontract was posted on February 20, 2026, indicating a future-oriented project timeline.

Other Heavy and Civil Engineering Construction

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 650+ contractors already using CLEATUS